Phosphorized CoNi2S4 Yolk-Shell Spheres for Highly Efficient Hydrogen Production via Water and Urea Electrolysis

Synergistic modulation of the d-band center in Ni3S2 by selenium and iron for enhanced oxygen evolution reaction (OER) and urea oxidation reaction (UOR)

Efficient production of green hydrogen energy is crucial in addressing the energy crisis and environmental concerns. The oxygen evolution reaction (OER) poses a challenge in conventional overall water electrolysis due to its slow thermodynamically process. Urea oxidation reaction (UOR) offers an alternative anodic oxidation method that is highly efficient and cost-effective, with favorable thermodynamics and sustainability. Recently, there has been limited research on bifunctional catalysts that exhibit excellent activity for both OER and UOR reactions. In this study, we developed a selenium and iron co-doped nickel sulfide (SeFe-Ni3S2) catalyst that demonstrated excellent Tafel slopes of 53.9 mV dec-1 and 16.4 mV dec-1 for OER and UOR, respectively. Density Functional Theory (DFT) calculations revealed that the introduction of metal (iron) and nonmetallic elements (selenium) was found to coordinate the d-band center, resulting in improved adsorption/desorption energies of the catalysts and reduced the overpotentials and limiting potentials for OER and UOR, respectively. This activity enhancement can be attributed to the altered electronic coordination structure after the introduction of selenium (Se) and iron (Fe), leading to an increase in the intrinsic activity of the catalyst. This work offers a new strategy for bifunctional catalysts for OER and UOR, presenting new possibilities for the future development of hydrogen production and novel energy conversion technologies. It contributes towards the urgent search for technologies that efficiently produce green hydrogen energy, providing potential solutions to mitigate the energy crisis and protect the environment.

Lattice Strain in High Entropy Oxides Promote CO2 Photomethanation

Lattice strain is widely investigated to improve the performance of heterogeneous catalysts, however, the effect of lattice strain is under-explored in high-entropy oxide based photocatalyst. In this study, noble-metal-free (CoCrMnFeNi)Ox with lattice strain is synthesized using a temperature-controlled, template-free and salt-assisted strategy. In the presence of lattice strain, an intensive internal electric field is formed in (CoCrMnFeNi)Ox, promoting the separation of photoinduced charge carriers. The size of the (CoCrMnFeNi)Ox can be tuned by varying the calcination temperature. Specifically, (CoCrMnFeNi)Ox prepared at a higher temperature possesses a smaller grain size exposing more active sites, resulting in an enhanced CO2 photomethanation performance. This work provides valuable insights for the rational design of the photocatalysts and highlights the promising role of high-entropy oxides in heterogeneous photocatalysis.

Zeolite Membrane-Based Low-Temperature Dehydrogenation of a Liquid Organic Hydrogen Carrier: A Key Step in the Development of a Hydrogen Economy

Methylcyclohexane (MCH) dehydrogenation is an equilibrium-limited reaction that requires high temperatures (>300 °C) for complete conversion. However, high-temperature operation can degrade catalytic activity and produce unwanted side products. Thus, a hybrid zeolite membrane (Z) is prepared on the inner surface of a tubular support and used it as a wall in a membrane reactor (MR) configuration. Pt/C catalysts is packed diluted with quartz sand inside the Z-coated tube and applied the MR for MCH dehydrogenation at low temperatures (190-250 °C). Z showed a remarkable H2-permselectivity in the presence of both toluene and MCH, yielding separation factors over 350. The Z-based MR achieved higher MCH conversion (75.3% ± 0.8% at 220 °C) than the conventional packed-bed reactor (56.4% ± 0.3%) and the equilibrium state (53.2%), owing to the selective removal of H2 through Z. In summary, the hybrid zeolite MR enhances MCH dehydrogenation at low temperatures by overcoming thermodynamic limitations and improves the catalytic performance and product selectivity of the reaction.

Strong Carbon Layer-Encapsulated Cobalt Tin Sulfide-Based Nanoporous Material as a Bifunctional Electrocatalyst for Zinc-Air Batteries

Global demands for cost-effective, durable, highly active, and bifunctional catalysts for metal-air batteries are tremendously increasing in scientific research fields. In this work, a strategy for the rational fabrication of carbon layer-encapsulated cobalt tin sulfide nanopores (CoSnOH/S@C NPs) material as a bifunctional electrocatalyst for rechargeable zinc (Zn)-air batteries by a cost-effective and facile two-step hydrothermal method is reported. Moreover, the effect of metal elements on the morphology of CoSnOH nanodisks material via the hydrothermal method is investigated. Owing to its excellent nanostructure, exclusive porous network, and high specific surface area, the optimized CoSnOH/S@C NPs material reveals superior catalytic properties. The as-prepared CoSnOH/S@C NPs electrocatalyst reveals better properties of oxygen reduction reaction (half-wave potential of -0.88 V vs reversible hydrogen electrode) and oxygen evolution reaction (overpotential of 137 mV at 10 mA cm-2) when compared with commercial Pt/C and IrO2 catalyst materials. Most significantly, the CoSnO/S@C NPs-based Zn-air battery exhibits more excellent cycling stability than the Pt/C+IrO2 catalyst-based one. Consequently, the proposed material provides a new route for fabricating more active and stable multifunctional catalyst materials for energy conversion and storage systems.

Carbonized wood fiber-supported S, N-codoped carbon layer-coated multinary metal sulfide nanoarchitecture for efficient oxygen evolution reaction at ampere-level current density

Multinary metal sulfides (MMSs) are highly suitable candidates for the application of electrocatalysis as they offer numerous parameters for optimizing the electronic structure and catalytic sites. Herein, a stable nanoarchitecture consisting of MMSs ((NiCoCrMnFe)Sx) nanoparticles embedded in S, N-codoped carbon (SNC) layers derived from metal organic framework (MOF) and supported on carbonized wood fibers (CWF) was fabricated by directly carbonization. Benefiting from this carbon-coated configuration, along with the synergistic effects within multinary metal systems, (NiCoCrMnFe)Sx@SNC/CWF delivers an exceptionally low overpotential of 260 mV at a high current density of 1000 mA cm-2, a small Tafel slope of 48.5 mV dec-1, and robust electrocatalytic stability. Furthermore, the (NiCoCrMnFe)Sx@SNC/CWF used as the cathode of rechargeable Zn-air batteries demonstrates higher power density and remarkable durability, surpassing that of commercial RuO2. Thus, we showcase the feasibility and advantages of employing highly efficient and durable MMSs materials for low-cost and sustainable energy conversion.

Highly selective urea electrooxidation coupled with efficient hydrogen evolution

Electrochemical urea oxidation offers a sustainable avenue for H2 production and wastewater denitrification within the water-energy nexus; however, its wide application is limited by detrimental cyanate or nitrite production instead of innocuous N2. Herein we demonstrate that atomically isolated asymmetric Ni-O-Ti sites on Ti foam anode achieve a N2 selectivity of 99%, surpassing the connected symmetric Ni-O-Ni counterparts in documented Ni-based electrocatalysts with N2 selectivity below 55%, and also deliver a H2 evolution rate of 22.0 mL h-1 when coupled to a Pt counter cathode under 213 mA cm-2 at 1.40 VRHE. These asymmetric sites, featuring oxygenophilic Ti adjacent to Ni, favor interaction with the carbonyl over amino groups in urea, thus preventing premature resonant C⎓N bond breakage before intramolecular N-N coupling towards N2 evolution. A prototype device powered by a commercial Si photovoltaic cell is further developed for solar-powered on-site urine processing and decentralized H2 production.

A hierarchical CoSx/Ni(OH)2 heterostructure as a bifunctional electrocatalyst for urea-assisted energy-efficient hydrogen production

We report hierarchical CoSx/Ni(OH)2/NF heterostructure nanorod arrays, which manifest superior bifunctional catalytic activities for the HER and UOR due to amorphous Ni(OH)2, synergistic effect of multiple components and self-supported structure. The CoSx/Ni(OH)2/NF-based urea electrolyzer requires a low cell voltage of 1.485 V to deliver 10 mA cm-2, which is obviously lower than that needed in water electrolysis.

Engineering Non-precious Trifunctional Cobalt-Based Electrocatalysts for Industrial Water Splitting and Ultra-High-Temperature Flexible Zinc-Air Battery

Developing efficient, robust, and cost-effective trifunctional catalysts for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) at high current density and high temperature is crucial for water splitting at industry-level conditions and ultra-high-temperature Zinc-air battery (ZAB). Herein, cobalt nanoparticles well-integrated with nitrogen-doped porous carbon leaves (Co@NPCL) by direct annealing of core-shell bimetallic zeolite imidazolate frameworks is synthesized. Benefiting from the homogeneous distribution of metallic Co nanoparticles, the conductive porous carbon, and the doped N species, the as-fabricated Co@NPCL catalysts exhibit outstanding trifunctional performances with low overpotentials at 10 mA cm-2 for HER (87 mV) and OER (276 mV), long-lasting lifetime of over 2000 h, and a high half-wave potential of 0.86 V versus RHE for ORR. Meanwhile, the Co@NPCL catalyst can serve as both cathode and anode for water splitting at industrial conduction, and exhibit a stable cell voltage of 1.87 V to deliver a constant catalytic current of 500 mA cm-2 over 60 h. Moreover, the excellent trifunctional activity of Co@NPCL enables the flexible ZAB to operate efficiently at ultra-high temperature of 70 °C, delivering 162 mW cm-2 peaks power density and an impressive stability for 4500 min at 2 mA cm-2.

Barium-induced lattice expansion of Ni(OH)2: enhancing catalytic urea oxidation activity for energy-saving H2 production

Constructing an environmentally friendly and efficient electrocatalyst holds important and profound significance for energy-efficient hydrogen production. Replacing the oxygen evolution reaction with a lower potential urea oxidation reaction (UOR) may save energy in water electrolysis to produce hydrogen. The UOR is characterized by its high energy barrier, which results in slow reaction kinetics. In this study, we introduced Ba(OH)2 into Ni(OH)2 to form uniform nanosheets. Due to the introduction of Ba2+, the lattice expansion of Ni(OH)2 was triggered, leading to significant improvement in UOR activity. The catalyst achieved a current density of 100 mA cm-2 at only 1.316 V and exhibited remarkable stability over time. Density functional theory (DFT) calculations demonstrate that the Ba-Ni(OH)2 site significantly reduces the energy barrier for urea adsorption, intermediate steps, and desorption. This work provides a novel and environmentally friendly strategy for constructing energy-efficient and highly efficient catalysts through the doping of alkaline earth metals.

Engineering advanced noble-metal-free electrocatalysts for energy-saving hydrogen production from alkaline water via urea electrolysis

When the anodic oxygen evolution reaction (OER) of water splitting is replaced by the urea oxidation reaction (UOR), the electrolyzer can fulfill hydrogen generation in an energy-economic manner for urea electrolysis as well as sewage purification. However, owing to the sluggish kinetics from a six-electron process for UOR, it is in great demand to design and fabricate high-performance and affordable electrocatalysts. Over the past years, numerous non-precious materials (especially nickel-involved samples) have offered huge potential as catalysts for urea electrolysis under alkaline conditions, even in comparison with frequently used noble-metal ones. In this review, recent efforts and progress in these high-efficiency noble-metal-free electrocatalysts are comprehensively summarized. The fundamentals and principles of UOR are first described, followed by highlighting UOR mechanism progress, and then some discussion about density functional theory (DFT) calculations and operando investigations is given to disclose the real reaction mechanism. Afterward, aiming to improve or optimize UOR electrocatalytic properties, various noble-metal-free catalytic materials are introduced in detail and classified into different classes, highlighting the underlying activity-structure relationships. Furthermore, new design trends are also discussed, including targetedly designing nanostructured materials, manipulating anodic products, combining theory and in situ experiments, and constructing bifunctional catalysts. Ultimately, we point out the outlook and explore the possible future opportunities by analyzing the remaining challenges in this booming field.

Modulation of Electronic Synergy to Enhance the Intrinsic Activity of Fe5Ni4S8 Nanosheets in Restricted Space Carbonized Wood Frameworks for Efficient Oxygen Evolution Reaction

Modulation of electronic structure and composition is widely recognized as an effective strategy to improve electrocatalyst performance. Herein, using a simple simultaneous carbonization and sulfidation strategy, NiFe double hydroxide-derived Fe5Ni4S8 (FNS) nanosheets immobilized on S-doped carbonized wood (SCW) framework by taking benefit of the orientation-constrained cavity and hierarchical porous structure of wood is proposed. Benefiting from the synergistic relationships between bimetal ions, the spatial confinement offered by the wood cavity, and the enhanced structural effects of the nanosheets array, the FNS/SCW exhibit enhanced intrinsic activity, increased accessibility of catalytically active sites, and convection-facilitated mass transport, resulting in an excellent oxygen evolution reaction (OER) activity and durability. Specifically, it takes a low overpotential of 230 mV at 50 mA cm-2 and potential increase is negligible (3.8%) at 50 mA cm-2 for 80 hours. Density functional theory (DFT) calculations further reveal that the synergistic effect of bimetal can optimize the electronic structure and lower the reaction energy barrier. The FNS/SCW used as the cathode of zinc-air battery shows higher power density and excellent durability relative to commercial RuO2, exhibiting a good application prospect. Overall, this research offers proposals for designing and producing effective OER electrocatalysts using sustainable resources.

Selective Electrocatalytic Conversion of Nitric Oxide to High Value-Added Chemicals

The artificial disturbance in the nitrogen cycle has necessitated an urgent need for nitric oxide (NO) removal. Electrochemical technologies for NO conversion have gained increasing attention in recent years. This comprehensive review presents the recent advancements in selective electrocatalytic conversion of NO to high value-added chemicals, with specific emphasis on catalyst design, electrolyte composition, mass diffusion, and adsorption energies of key intermediate species. Furthermore, the review explores the synergistic electrochemical co-electrolysis of NO with specific carbon source molecules, enabling the synthesis of a range of valuable chemicals with C─N bonds. It also provides in-depth insights into the intricate reaction pathways and underlying mechanisms, offering valuable perspectives on the challenges and prospects of selective NO electrolysis. By advancing comprehension and fostering awareness of nitrogen cycle balance, this review contributes to the development of efficient and sustainable electrocatalytic systems for the selective synthesis of valuable chemicals from NO.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Artificial Heterointerfaces with Regulated Charge Distribution of Ni Active Sites for Urea Oxidation Reaction

In contrast to the thermodynamically unfavorable anodic oxygen evolution reaction, the electrocatalytic urea oxidation reaction (UOR) presents a more favorable thermodynamic potential. However, the practical application of UOR has been hindered by sluggish kinetics. In this study, hierarchical porous nanosheet arrays featuring abundant Ni-WO3 heterointerfaces on nickel foam (Ni-WO3/NF) is introduced as a monolith electrode, demonstrating exceptional activity and stability toward UOR. The Ni-WO3/NF catalyst exhibits unprecedentedly rapid UOR kinetics (200 mA cm-2 at 1.384 V vs. RHE) and a high turnover frequency (0.456 s-1), surpassing most previously reported Ni-based catalysts, with negligible activity decay observed during a durability test lasting 150 h. Ex situ X-ray photoelectron spectroscopy and density functional theory calculations elucidate that the WO3 interface significantly modulates the local charge distribution of Ni species, facilitating the generation of Ni3+ with optimal affinity for interacting with urea molecules and CO2 intermediates at heterointerfaces during UOR. This mechanism accelerates the interfacial electrocatalytic kinetics. Additionally, in situ Fourier transform infrared spectroscopy provides deep insights into the substantial contribution of interfacial Ni-WO3 sites to UOR electrocatalysis, unraveling the underlying molecular-level mechanisms. Finally, the study explores the application of a direct urea fuel cell to inspire future practical implementations.

Synergistic engineering of P, N-codoped carbon-confined bimetallic cobalt/nickel phosphides with tailored electronic structures for boosting urea electro-oxidation

Bimetallic phosphides exhibit superior electrocatalytic activities and synergistic effects that make them ideal electrocatalysts for the urea oxidation reaction (UOR). Herein, P, N-codoped carbon-encapsulated cobalt/nickel phosphides derived from NiCo-MOF-74 (NiCoP@PNC) and anchored on P-doped carbonized wood fiber (PCWF) for UOR were prepared through synchronous carbonization and phosphorization. By benefiting from the synergistic effect of structural and electronic modulation, NiCoP@PNC/PCWF exhibits excellent UOR electrocatalytic performance under alkaline conditions, achieving a current density of 50 mA cm-2 with a potential of only 1.34 V (vs reversible hydrogen electrode, RHE) and continuous operation for more than 72 h. In addition, for the overall urea splitting, an electrolyzer using UOR replaced OER, which required only 1.50 V to achieve a current density of 50 mA cm-2 with excellent stability, 230 mV less than that required for the HER||OER system. In-depth theoretical analysis further proves that the strong synergistic effect between Co and Ni optimizes electronic structures, yielding excellent UOR properties. The synergistic strategy of structural and electrical modulation provides broad prospects for the design and synthesis of excellent UOR electrocatalysts for energy-saving hydrogen production by using renewable resources.

In-situ construction defect-rich CuNiCoS4 /1T-MoS2 heterostructures as superior electrocatalysts for water splitting

Rational design and construction of bifunctional heterostructure electrocatalysts with high-conductivity and more active sites is imperative for water splitting. Herein, based on the tunable property of layered double hydroxide laminates cations, topological transformation technology and template confine method, a series of high-performance bifunctional catalysts composed of transition metal doping NiCo2S4 (MNiCoS4, M = Cu, Fe, Zn, Mn) and 1T-MoS2 were in-situ fabricated on nickel foam. In particular, CuNiCoS4/1T-MoS2 exhibits an ultralow overpotential of 163 mV at 50 mA cm-2 for oxygen evolution reaction (OER) and favorable hydrogen evolution reaction activity. The two-electrode system requires only 1.52 V to attain a current density of 10 mA cm-2. To the best of our knowledge, its OER electrocatalytic activity far exceed state-of-art catalysts reported. The outstanding performance of this series of catalysts can be attributed to two aspects. First, the highly conductive 1T-MoS2 can facilitate electron transfer, and second, the defect-rich heterostructure can effectively regulate the electronic structure of the active metal and expose abundant active sites. This work provides a valuable strategy for developing high activity electrocatalysts for efficient water splitting.

Urea catalytic oxidation for energy and environmental applications

Urea is one of the most essential reactive nitrogen species in the nitrogen cycle and plays an indispensable role in the water-energy-food nexus. However, untreated urea or urine wastewater causes severe environmental pollution and threatens human health. Electrocatalytic and photo(electro)catalytic urea oxidation technologies under mild conditions have become promising methods for energy recovery and environmental remediation. An in-depth understanding of the reaction mechanisms of the urea oxidation reaction (UOR) is important to design efficient electrocatalysts/photo(electro)catalysts for these technologies. This review provides a critical appraisal of the recent advances in the UOR by means of both electrocatalysis and photo(electro)catalysis, aiming to comprehensively assess this emerging field from fundamentals and materials, to practical applications. The emphasis of this review is on the design and development strategies for electrocatalysts/photo(electro)catalysts based on reaction pathways. Meanwhile, the UOR in natural urine is discussed, focusing on the influence of impurity ions. A particular emphasis is placed on the application of the UOR in energy and environmental fields, such as hydrogen production by urea electrolysis, urea fuel cells, and urea/urine wastewater remediation. Finally, future directions, prospects, and remaining challenges are discussed for this emerging research field. This critical review significantly increases the understanding of current progress in urea conversion and the development of a sustainable nitrogen economy.

Electronic Structure Regulated Nickel-Cobalt Bimetal Phosphide Nanoneedles for Efficient Overall Water Splitting

Transition metal phosphides (TMPs) have been widely studied for water decomposition for their monocatalytic property for anodic or cathodic reactions. However, their bifunctional catalytic activity still remains a major challenge. Herein, hexagonal nickel-cobalt bimetallic phosphide nanoneedles with 1-3 μm length and 15-30 nm diameter supported on NF (NixCo2-xP NDs/NF) with adjusted electron structure have been successfully prepared. The overall alkaline water electrolyzer composed of the optimal anode (Ni0.67Co1.33P NDs/NF) and cathode (Ni1.01Co0.99P NDs/NF) provide 100 mA cm-2 at 1.62 V. Gibbs Free Energy for reaction paths proves that the active site in the hydrogen evolution reaction (HER) is Ni and the oxygen evolution reaction (OER) is Co in NixCo2-xP, respectively. In the HER process, Co-doping can result in an apparent accumulation of charge around Ni active sites in favor of promoting HER activity of Ni sites, and ΔGH* of 0.19 eV is achieved. In the OER process, the abundant electron transfer around Co-active sites results in the excellent ability to adsorb and desorb *O and *OOH intermediates and an effectively reduced ∆GRDS of 0.37 eV. This research explains the regulation of electronic structure change on the active sites of bimetallic materials and provides an effective way to design a stable and effective electrocatalytic decomposition of alkaline water.

Synergistic Niobium Doped Two-Dimensional Zirconium Diselenide: An Efficient Electrocatalyst for O2 Reduction Reaction

The development of high-activity and low-price cathodic catalysts to facilitate the electrochemically sluggish O2 reduction reaction (ORR) is very important to achieve the commercial application of fuel cells. Here, we have investigated the electrocatalytic activity of the two-dimensional single-layer Nb-doped zirconium diselenide (2D Nb-ZrSe2) toward ORR by employing the dispersion corrected density functional theory (DFT-D) method. Through our study, we computed structural properties, electronic properties, and energetics of the 2D Nb-ZrSe2 and ORR intermediates to analyze the electrocatalytic performance of 2D Nb-ZrSe2. The electronic property calculations depict that the 2D monolayer ZrSe2 has a large band gap of 1.48 eV, which is not favorable for the ORR mechanism. After the doping of Nb, the electronic band gap vanishes, and 2D Nb-ZrSe2 acts as a conductor. We studied both the dissociative and the associative pathways through which the ORR can proceed to reduce the oxygen molecule (O2). Our results show that the more favorable path for O2 reduction on the surface of the 2D Nb-ZrSe2 is the 4e- associative path. The detailed ORR mechanisms (both associated and dissociative) have been explored by computing the changes in Gibbs free energy (ΔG). All of the ORR reaction intermediate steps are thermodynamically stable and energetically favorable. The free energy profile for the associative path shows the downhill behavior of the free energy vs the reaction steps, suggesting that all ORR intermediate structures are catalytically active for the 4e- associative path and a high 4e- reduction pathway selectivity. Therefore, 2D Nb-ZrSe2 is a promising catalyst for the ORR, which can be used as an alternative ORR catalyst compared to expensive platinum (Pt).

Recent progress of Ni-based nanomaterials for the electrocatalytic oxygen evolution reaction at large current density

The precise design and development of high-performing oxygen evolution reaction (OER) for the production of industrial hydrogen gas through water electrolysis has been a widely studied topic. A profound understanding of the nature of electrocatalytic processes reveals that Ni-based catalysts are highly active toward OER that can stably operate at a high current density for a long period of time. Given the current gap between research and applications in industrial water electrolysis, we have completed a systematic review by constructively discussing the recent progress of Ni-based catalysts for electrocatalytic OER at a large current density, with special focus on the morphology and composition regulation of Ni-based electrocatalysts for achieving extraordinary OER performance. This review will facilitate future research toward rationally designing next-generation OER electrocatalysts that can meet industrial demands, thereby promoting new sustainable solutions for energy shortage and environment issues.

Metal nitrides for seawater electrolysis

Electrocatalytic high-throughput seawater electrolysis for hydrogen production is a promising green energy technology that offers possibilities for environmental and energy sustainability. However, large-scale application is limited by the complex composition of seawater, high concentration of Cl- leading to competing reaction, and severe corrosion of electrode materials. In recent years, extensive research has been conducted to address these challenges. Metal nitrides (MNs) with excellent chemical stability and catalytic properties have emerged as ideal electrocatalyst candidates. This review presents the electrode reactions and basic parameters of the seawater splitting process, and summarizes the types and selection principles of conductive substrates with critical analysis of the design principles for seawater electrocatalysts. The focus is on discussing the properties, synthesis, and design strategies of MN-based electrocatalysts. Finally, we provide an outlook for the future development of MNs in the high-throughput seawater electrolysis field and highlight key issues that require further research and optimization.

Recent Advancements in Electrochemical Hydrogen Production via Hybrid Water Splitting

As one of the most promising approaches to producing high-purity hydrogen (H2 ), electrochemical water splitting powered by the renewable energy sources such as solar, wind, and hydroelectric power has attracted considerable interest over the past decade. However, the water electrolysis process is seriously hampered by the sluggish electrode reaction kinetics, especially the four-electron oxygen evolution reaction at the anode side, which induces a high reaction overpotential. Currently, the emerging hybrid electrochemical water splitting strategy is proposed by integrating thermodynamically favorable electro-oxidation reactions with hydrogen evolution reaction at the cathode, providing a new opportunity for energy-efficient H2 production. To achieve highly efficient and cost-effective hybrid water splitting toward large-scale practical H2 production, much work has been continuously done to exploit the alternative anodic oxidation reactions and cutting-edge electrocatalysts. This review will focus on recent developments on electrochemical H2 production coupled with alternative oxidation reactions, including the choice of anodic substrates, the investigation on electrocatalytic materials, and the deep understanding of the underlying reaction mechanisms. Finally, some insights into the scientific challenges now standing in the way of future advancement of the hybrid water electrolysis technique are shared, in the hope of inspiring further innovative efforts in this rapidly growing field.

P-doped Co3S4/NiS2 heterostructures embedded in N-doped carbon nanoboxes: Synergistical electronic structure regulation for overall water splitting

Water splitting using transition metal sulfides as electrocatalysts has gained considerable attention in the field of renewable energy. However, their electrocatalytic activity is often hindered by unfavorable free energies of adsorbed hydrogen and oxygen-containing intermediates. Herein, phosphorus (P)-doped Co3S4/NiS2 heterostructures embedded in N-doped carbon nanoboxes were rationally synthesized via a pyrolysis-sulfidation-phosphorization strategy. The hollow structure of the carbon matrix and the nanoparticles contained within it not only result in a high specific surface area, but also protects them from corrosion and acts as a conductive pathway for efficient electron transfer. Density functional theory (DFT) calculations indicate that the introduction of P dopants improves the conductivity of NiS2 and Co3S4, promotes the charge transfer process, and creates new electrocatalytic sites. Additionally, the NiS2-Co3S4 heterojunctions can enhance the adsorption efficiency of hydrogen intermediates (H*) and lower the energy barrier of water splitting via a synergistic effect with P-doping. These characteristics collectively enable the titled catalyst to exhibit excellent electrocatalytic activity for water splitting in alkaline medium, requiring only small overpotentials of 150 and 257 mV to achieve a current density of 10 mA cm-2 for hydrogen and oxygen evolution reactions, respectively. This work sheds light on the design and optimization of efficient electrocatalysts for water splitting, with potential implications for renewable energy production.

Regulating the electronic structure of metal-organic frameworks via ion-exchanged Ir dispersion for robust overall water splitting

A facile ion exchange strategy to fabricate CoIrx-BDC with atomically dispersed Ir is developed towards overall water splitting. The optimized CoIr3-BDC requires only 12 and 81 mV to deliver 10 and 100 mA cm-2 alkaline HER, respectively, and only 245 mV to reach 100 mA cm-2 alkaline OER.

Iron-optimized oxygen vacancy concentration to strengthen the electrocatalytic ability of the urea oxidation reaction

Iron-modified Ni(OH)2/NiSe2 enhances oxygen vacancies, expanding the electrochemically active surface area, which exhibiting superior selectivity and stability in urea oxidation reaction, outperforming pristine Ni(OH)2@NiSe2. It also demonstrates superior catalytic performance in the oxidation reactions of other small molecules.

Rapid construction of Co/CoO/CoCH nanowire core/shell arrays for highly efficient hydrogen evolution reaction

The Co/CoO/CoCH (P-CoCH) nanowire core/shell arrays were prepared by a one step hydrothermal method and rapid reduction of cobalt carbonate hydroxide (CoCH) in Ar/H2 plasma for the first time. The rapid reduction process endows the P-CoCH with a unique porous structure, larger electrochemical active surface area and abundant activity sites. Therefore, the as-prepared P-CoCH nanowire core/shell arrays show superior HER performance with a low overpotential of 69 mV and a small Tafel slope of 47 mV dec-1 at a current density of 10 mA cm-2. In addition, the P-CoCH electrocatalyst demonstrates an excellent cycling stability without any obvious decay after 24 h continuous operation at 100 mA cm-2 current density. This study might provide a new insight into the rapidly construction of efficient HER Co-based electrocatalysts and beyond.

Modulation Strategies for the Preparation of High-Performance Catalysts for Urea Oxidation Reaction and Their Applications

Compared with the traditional electrolysis of water to produce hydrogen, urea-assisted electrolysis of water to produce hydrogen has significant advantages and has received extensive attention from researchers. Unfortunately, urea oxidation reaction (UOR) involves a complex six-electron transfer process leading to high overpotential, which forces researchers to develop high-performance UOR catalysts to drive the development of urea-assisted water splitting. Based on the UOR mechanism and extensive literature research, this review summarizes the strategies for preparing highly efficient UOR catalysts. First, the UOR mechanism is introduced and the characteristics of excellent UOR catalysts are pointed out. Aiming at this, the following modulation strategies are proposed to improve the catalytic performance based on summarizing various literature: 1) Accelerating the active phase formation to reduce initial potential; 2) Creating double active sites to trigger a new UOR mechanism; 3) Accelerating urea adsorption and promoting C─N bond cleavage to ensure the effective conduct of UOR; 4) Promoting the desorption of CO2 to improve stability and prevent catalyst poisoning; 5) Promoting electron transfer to overcome the inherent slow dynamics of UOR; 6) Increasing active sites or active surface area. Then, the application of UOR in electrochemical devices is summarized. Finally, the current deficiencies and future directions are discussed.

A universal approach to dual-metal-atom catalytic sites confined in carbon dots for various target reactions

Here, a molecular-design and carbon dot-confinement coupling strategy through the pyrolysis of bimetallic complex of diethylenetriamine pentaacetic acid under low-temperature is proposed as a universal approach to dual-metal-atom sites in carbon dots (DMASs-CDs). CDs as the "carbon islands" could block the migration of DMASs across "islands" to achieve dynamic stability. More than twenty DMASs-CDs with specific compositions of DMASs (pairwise combinations among Fe, Co, Ni, Mn, Zn, Cu, and Mo) have been synthesized successfully. Thereafter, high intrinsic activity is observed for the probe reaction of urea oxidation on NiMn-CDs. In situ and ex situ spectroscopic characterization and first-principle calculations unveil that the synergistic effect in NiMn-DMASs could stretch the urea molecule and weaken the N-H bond, endowing NiMn-CDs with a low energy barrier for urea dehydrogenation. Moreover, DMASs-CDs for various target electrochemical reactions, including but not limited to urea oxidation, are realized by optimizing the specific DMAS combination in CDs.

Uncovering the centrality of mono-dentate SO32-/SO42- modifiers grafted on a metal vanadate in accelerating wet NOX reduction and poison pyrolysis

NOX rarely binds with labile oxygens of catalytic solids, whose Lewis acidic (LA) species possess higher binding strengths with NH3 (ENH3) and H2O than Brönsted acidic counterparts (BA--H+; -OH), oftentimes leading to elevate energy barrier (EBARRIER) and weaken H2O tolerance, respectively. These limit NH3-assisted wet NOX reduction via Langmuir-Hinshelwood-type or Eley-Rideal (ER)-type model on LA species, while leaving ER-type analogue on BA--H+ species proper to reduce wet NOX. Given hard-to-regulate strength/amount of -OH species and occasional association between ENH3 and EBARRIER, Ni1V2O6 (Ni1) was rationally chosen as a platform to isolate mono-dentate SO32-/SO42- species for use as BA--H+ bonds via protonation to increase collision frequency (k'APP,0) alongside with disclosure of advantages of SO32-/SO42--functionalized Ni1V2O6 (Ni1-S) over Ni1 in reducing wet NOX. Ni1-S outperformed Ni1 in achieving a larger BA--H+ quantity (k'APP,0↑), increasing H2O tolerance, and elevating oxygen mobility, thus promoting NOX reduction activity/consequences under SO2-excluding gases. V2O5-WO3 composite simulating a commercial catalyst could isolate mono-dentate SO32-/SO42- species and served as a control (V2O5-WO3-S) for comparison. Ni1-S was superior to V2O5-WO3-S in evading ammonium (bi-)sulfate (AS/ABS) poison accumulation and expediting AS/ABS pyrolysis efficiency, thereby improving AS/ABS resistance under SO2-including gases, while enhancing resistance against hydro-thermal aging.

Water-Stable Fluorous Metal-Organic Frameworks with Open Metal Sites and Amine Groups for Efficient Urea Electrocatalytic Oxidation

Urea oxidation reaction (UOR) is one of the promising alternative anodic reactions to water oxidation that has attracted extensive attention in green hydrogen production. The application of specifically designed electrocatalysts capable of declining energy consumption and environmental consequences is one of the major challenges in this field. Therefore, the goal is to achieve a resistant, low-cost, and environmentally friendly electrocatalyst. Herein, a water-stable fluorinated Cu(II) metalorganic framework (MOF) {[Cu2 (L)(H2 O)2 ]·(5DMF)(4H2 O)}n (Cu-FMOF-NH2 ; H4 L = 3,5-bis(2,4-dicarboxylic acid)-4-(trifluoromethyl)aniline) is developed utilizing an angular tetracarboxylic acid ligand that incorporates both trifluoromethyl (-CF3 ) and amine (-NH2 ) groups. The tailored structure of Cu-FMOF-NH2 where linkers are connected by fluoride bridges and surrounded by dicopper nodes reveals a 4,24T1 topology. When employed as electrocatalyst, Cu-FMOF-NH2 requires only 1.31 V versus reversible hydrogen electrode (RHE) to deliver 10 mA cm-2 current density in 1.0 m KOH with 0.33 m urea electrolyte and delivered an even higher current density (50 mA cm-2 ) at 1.47 V versus RHE. This performance is superior to several reported catalysts including commercial RuO2 catalyst with overpotential of 1.52 V versus RHE. This investigation opens new opportunities to develop and utilize pristine MOFs as a potential electrocatalyst for various catalytic reactions.

Exploring The Synergistic Effect Of CoSeP/CoP Interface Catalyst For Efficient Urea Electrolysis

Electrocatalytic oxidation of urea (UOR) is a potential energy-saving hydrogen production technology that can replace oxygen evolution reaction (OER). Therefore, CoSeP/CoP interface catalyst is synthesized on nickel foam using hydrothermal, solvothermal, and in situ template methods. The strong interaction of tailored CoSeP/CoP interface promotes the hydrogen production performance of electrolytic urea. During the hydrogen evolution reaction (HER), the overpotential can reach 33.7 mV at 10 mA cm-2 . The cell voltage can reach 1.36 V at 10 mA cm-2 in the overall urea electrolytic process. Notably, the overall urine electrolysis performance of the catalyst in the human urine medium can reach 1.40 V at 10 mA cm-2 and can exhibit durable cycle stability at 100 mA cm-2 . Density functional theory (DFT) proves that the CoSeP/CoP interface catalyst can better adsorb and stabilize reaction intermediates CO* and NH* on its surface through a strong synergistic effect, thus enhancing the catalytic activity.

Synergistically Regulating the Electronic Structure of CoS by Cation and Anion Dual-Doping for Efficient Overall Water Splitting

Precisely regulating the electronic construction of the reactive center is an essential method to improve the electrocatalysis, but achieving efficient multifunctional characteristics remains a challenge. Herein, CoS sample dual-doped by Cu and F atoms, as bifunctional electrocatalyst, is designed and synthesized for water electrolysis. According to the experimental results, Cu atom doping can perform primary electronic adjustment and obtain bifunctional properties, and then the electronic structure is adjusted for the second time to achieve an optimal state by introducing F atom. Meanwhile, this dual-doping strategy will result in lattice distortion and expose more active sites. As expected, dual-doped Cu-F-CoS show the brilliant electrocatalytic activity, revealing ultralow overpotentials (59 mV for HER, 213 mV for OER) at 10 mA cm-2 in alkaline electrolyte. Besides, it also exhibits distinguished water electrolysis activity with cell voltage as low as 1.52 V at 10 mA cm-2 . Our work can provide an atomic-level perception for adjusting the electronic construction of reactive sites by means of dual-doping engineering and put forward a contributing path for the electrocatalysts with multifunctional designing.

Rational Design of Trimetallic Sulfide Electrodes for Alkaline Water Electrolysis with Ampere-Level Current Density

Electrochemical water splitting is considered an environmentally friendly approach to hydrogen generation. However, it is difficult to achieve high current density and stability. Herein, we design an amorphous/crystalline heterostructure electrode based on trimetallic sulfide over nickel mesh substrate (NiFeMoS/NM), which only needs low overpotentials of 352 mV, 249 mV, and 360 mV to achieve an anodic oxygen evolution reaction (OER) current density of 1 A cm-2 in 1 M KOH, strong alkaline electrolyte (7.6 M KOH), and alkaline-simulated seawater, respectively. More importantly, it also shows superior stability with negligible decay after continuous work for 120 h at 1 A cm-2 in the strong alkaline electrolyte. The excellent OER performance of the as-obtained electrode can be attributed to the strong electronic interactions between different metal atoms, abundant amorphous/crystalline hetero-interfaces, and 3D porous nickel mesh structure. Finally, we coupled NiFeMoS/NM as both the anode and cathode in the anion exchange membrane electrolyzer, which can achieve low cell voltage and high stability at ampere-level current density, demonstrating the great potential of practicability.

Key Roles of Interfacial OH- ion Distribution on Proton Coupled Electron Transfer Kinetics Toward Urea Oxidation Reaction

Enhancing alkaline urea oxidation reaction (UOR) activity is essential to upgrade renewable electrolysis systems. As a core step of UOR, proton-coupled electron transfer (PCET) determines the overall performance, and accelerating its kinetic remains a challenge. In this work, a newly raised electrocatalyst of NiCoMoCuO_x H_y with derived multi-metal co-doping (oxy)hydroxide species during electrochemical oxidation states is reported, which ensures considerable alkaline UOR activity (10/500 mA cm^-2 at 1.32/1.52 V vs RHE, respectively). Impressively, comprehensive studies elucidate the correlation between the electrode-electrolyte interfacial microenvironment and the electrocatalytic urea oxidation behavior. Specifically, NiCoMoCuO_x H_y featured with dendritic nanostructure creates a strengthened electric field distribution. This structural factor prompts the local OH^- enrichment in electrical double layer (EDL), so that the dehydrogenative oxidation of the catalyst is directly reinforced to facilitate the subsequent PCET kinetics of nucleophilic urea, resulting in high UOR performance. In practical utilization, NiCoMoCuO_x H_y -driven UOR coupled cathodic hydrogen evolution reaction (HER) and carbon dioxide reduction reaction (CO₂ RR), and harvested high value-added products of H₂ and C₂ H₄ , respectively. This work clarifies a novel mechanism to improve electrocatalytic UOR performance through structure-induced interfacial microenvironment modulation.

Soft-template derived Ni/Mo2C hetero-sheet arrays for large current density hydrogen evolution reaction

Practical structural design and electronic regulation are significant for synthesising efficient electrocatalysts. Therefore, a facile soft-template approach has been applied to successfully grow Ni/Mo₂C heterojunction nanosheet arrays on nickel foam (NF) skeleton (NS-Ni/Mo₂C@NF) using polyvinylpyrrolidone (PVP) as a soft template. The density functional theory (DFT) calculations reveal that abundant Ni/Mo₂C heterojunction in NS-Ni/Mo₂C@NF can provide many active sites with a moderate hydrogen adsorption free energy (ΔG_H*, 0.037 eV). Benefiting from this nanosheet array structure and abundant Ni/Mo₂C heterojunctions, the NS-Ni/Mo₂C@NF catalyst can efficiently catalyze HER, especially at large current densities. As a result, only 151 and 271 mV overpotentials are needed to deliver 100 and 1000 mA/cm² HER, respectively. More importantly, the hydrogen production testing with NS-Ni/Mo₂C@NF as the working electrode can run stably for 500 h without activity decay under the current density of 500 mA/cm² commonly used in industrial water electrolyzers, indicating that NS-Ni/Mo₂C@NF has broad application prospects.

Amorphous/crystalline heterostructure of NiFe (oxy)hydroxides for efficient oxygen evolution and urea oxidation

A V-doped amorphous/crystalline heterostructure of NiFe (oxy)hydroxide with nanoflower morphology is developed, which exhibits excellent OER and UOR catalytic activities. V doping changes the local charge density, lowers the reaction barrier, and optimizes the electron arrangement of the NiFe LDH catalyst.

High-Density NiCu Bimetallic Phosphide Nanosheet Clusters Constructed by Cu-Induced Effect Boost Total Urea Hydrolysis for Hydrogen Production

The development of urea electrolysis technologies toward energy-saving hydrogen production can alleviate the environmental issues caused by urea-rich wastewater. In the current practices, the development of high-performance electrocatalysts in urea electrolysis remains critical. In this work, the NiCu-P/NF catalyst is prepared by anchoring Ni/Cu bimetallic phosphide nanosheets onto Ni foam (NF). In the experiments, the micron-sized elemental Cu polyhedron is first anchored on the surface of the NF substrate to provide more space for the growth of bimetallic nanosheets. Meanwhile, the Cu element adjusted the electron distribution within the composite and formed Ni/P orbital vacancies, which in turn accelerated the kinetic process. As a result, the optimal NiCu-P/NF sample exhibits excellent catalytic activity and cycling stability in a hybrid electrolysis system for the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER). Further, the alkaline urea-containing electrolyzer is assembled with NiCu-P/NF as two electrodes reached a current density of 50 mA cm^-2 with a low driving potential of 1.422 V, which outperforms the typical commercial noble metal electrolyzer (RuO₂||Pt/C). Those findings suggest the feasibility of the substrate regulation strategy to increase the growth density of active species in preparation of an efficient bifunctional electrocatalyst for cracking the urea-containing wastewater.

Sulfur-Induced Low Crystallization of Ultrathin Pd Nanosheet Arrays for Sulfur Ion Degradation-Assisted Energy-Efficient H2 Production

The utilization of thermodynamically favorable sulfur oxidation reaction (SOR) as an alternative to sluggish oxygen evolution reaction is a promising technology for low-energy H₂ production while degrading the sulfur source from wastewater. Herein, amorphous/crystalline S-doped Pd nanosheet arrays on nickel foam (a/c S-Pd NSA/NF) is prepared by S-doping crystalline Pd NSA/NF.  Owing to the ultrathin amorphous nanosheet structure and the incorporation of S atoms, the a/c S-Pd NSA/NF provides a large number of active sitesand the optimized electronic structure, while exhibiting outstanding electrocatalytic activity in hydrogen evolution reaction (HER) and SOR. Therefore, the coupling system consisting of SOR-assisted HER can reach a current density of 100 mA cm^-2 at 0.642 V lower than conventional electrolytic water by 1.257 V, greatly reducing energy consumption. In addition, a/c S-Pd NSA/NF can generate H₂ over a long period of time while degrading S^2- in water to the value-added sulfur powder, thus further reducing the cost of H₂ production. This work proposes an attractive strategy for the construction of an advanced electrocatalyst for H₂ production and utilization of toxic sulfide wastewater by combining S-doping induced partial amorphization and ultrathin metal nanosheet arrays.

One-Step Phase Separation for Core-Shell Carbon@Indium Oxide@Bismuth Microspheres with Enhanced Activity for CO2 Electroreduction to Formate

It is a substantial challenge to construct electrocatalysts with high activity, good selectivity, and long-term stability for electrocatalytic reduction of carbon dioxide to formic acid. Herein, bismuth and indium species are innovatively integrated into a uniform heterogeneous spherical structure by a neoteric quasi-microemulsion method, and a novel C@In₂ O₃ @Bi₅₀ core-shell structure is constructed through a subsequent one-step phase separation strategy due to melting point difference and Kirkendall effect with the nano-limiting effect of the carbon structure. This core-shell C@In₂ O₃ @Bi₅₀ catalyst can selectively reduce CO₂ to formate with high selectivity (≈90% faradaic efficiency), large partial current density (24.53 mA cm^-2 at -1.36 V), and long-term stability (up to 14.5 h), superior to most of the Bi-based catalysts. The hybrid Bi/In₂ O₃ interfaces of core-shell C@In₂ O₃ @Bi will stabilize the key intermediate HCOO* and suppress CO poisoning, benefiting the CO₂ RR selectivity and stability, while the internal cavity of core-shell structure will improve the reaction kinetics because of the large specific surface area and the enhancement of ion shuttle and electron transfer. Furthermore, the nano-limited domain effect of outmost carbon prevent active components from oxidation and agglomeration, helpful for stabilizing the catalyst. This work offers valuable insights into core-shell structure engineering to promote practical CO₂ conversion technology.

RE-doped (RE = La, Ce and Er) Ni2P porous nanostructures as promising electrocatalysts for hydrogen evolution reaction

The construction of an efficient non-noble-metal electrocatalyst towards alkaline hydrogen evolution is challenging but in great demand. The fabrication of a porous nanostructure and heteroatom doping are two productive strategies for developing effective electrocatalysts. In this contribution, we report the preparation of La, Ce and Er-doped Ni₂P porous nanostructures through a facile water bath method and phosphorization strategy. The Er-doped Ni₂P porous nanostructure exhibits superb hydrogen evolution reaction (HER) catalytic performance under alkaline conditions with a low cathodic overpotential of 87 mV (10 mA cm^-2, glassy carbon) and a small Tafel slope of 65.4 mV dec^-1. It also displays excellent electrochemical stability in alkaline electrolytes. First-principles density functional theory (DFT) calculations disclosed the mechanism of the alkaline HER catalysis. For pristine Ni₂P, the P site acts as the optimal active site with the Gibbs free energy of H* absorption (ΔG_H*) of 0.48 eV. After La, Ce and Er are doped, respectively, the P site is still the active center of the three doping systems. Notably, the ΔG_H* value is reduced from 0.48 eV to 0.23 eV (P site in La-doped Ni₂P), 0.20 eV (P site in Ce-doped Ni₂P) and 0.18 eV (P site in Er-doped Ni₂P), suggesting that doping with La, Ce and Er atoms plays a crucial role in decreasing the H* absorption energy on optimal P sites and the optimum active site with a smaller ΔG_H* can expedite the charge transfer rate for H* midbody and H₂ generation. This is particularly noticeable for Er doping, which is in accordance with the experimental result.

Formation and Stabilization of NiOOH by Introducing α-FeOOH in LDH: Composite Electrocatalyst for Oxygen Evolution and Urea Oxidation Reactions

NiOOH is considered as the most active intermediate during electrochemical oxidation reaction, however, it is hard to directly synthesize due to high oxidation energy. Herein, theoretical calculations predict that α-FeOOH enables a decline in formation energy and an improvement in stabilization of NiOOH in NiFe-based layered double hydroxide (LDH). Inspiringly, a composite composed of α-FeOOH and LDH is well-designed and successfully fabricated in hydrothermal treatment by adding extra Fe³⁺ resource, and stable NiOOH is obtained by the following electro-oxidation method. Benefiting from strong electron-capturing capability of α-FeOOH, it efficiently promotes charge redistribution around the Ni/Fe sites and activates Ni atoms of LDH, verified by X-ray photoelectron spectra (XPS) and X-ray absorption spectra (XAS). The d-band center is optimized that balances the absorption and desorption energy, and thus Gibbs free energy barrier is lowered dramatically toward oxygen evolution reaction (OER) and urea oxidation reaction (UOR), and finally showing an outstanding overpotential of 195 mV and a potential of 1.35 V at 10 mA cm^-2 , respectively. This study provides a novel strategy to construct highly efficient catalysts via the introduction of a new phase for complex multiple-electron reactions.

Recent Advances in Defect-Engineered Transition Metal Dichalcogenides for Enhanced Electrocatalytic Hydrogen Evolution: Perfecting Imperfections

Switching to renewable, carbon-neutral sources of energy is urgent and critical for climate change mitigation. Despite how hydrogen production by electrolyzing water can enable renewable energy storage, current technologies unfortunately require rare and expensive platinum group metal electrocatalysts, which limit their economic viability. Transition metal dichalcogenides (TMDs) are low-cost, earth-abundant materials that possess the potential to replace platinum as the hydrogen evolution catalyst for water electrolysis, but so far, pristine TMDs are plagued by poor catalytic performances. Defect engineering is an attractive approach to enhance the catalytic efficiency of TMDs and is not subjected to the limitations of other approaches like phase engineering and surface structure engineering. In this minireview, we discuss the recent progress made in defect-engineered TMDs as efficient, robust, and low-cost catalysts for water splitting. The roles of chalcogen atomic defects in engineering TMDs for improvements to the hydrogen evolution reaction (HER) are summarized. Finally, we highlight our perspectives on the challenges and opportunities of defect engineering in TMDs for electrocatalytic water splitting. We hope to provide inspirations for designing the state-of-the-art catalysts for future breakthroughs in the electrocatalytic HER.

Cauliflower-like NiFe alloys anchored on a flake iron nickel carbonate hydroxide heterostructure towards superior overall water and urea electrolysis

Exploring efficient, stable and multifunctional Earth-rich electrocatalysts is vital for hydrogen generation. Hence, an efficient heterostructure consisting of cauliflower-like NiFe alloys anchored on flake iron nickel carbonate hydroxide which is supported on carbon cloth (NiFe/NiFeCH/CC) was synthesized as a trifunctional electrocatalyst for efficient hydrogen production by overall water and urea splitting. While optimizing and regulating the ratio of Ni to Fe, benefiting from the special morphology and synergistic effect between the NiFe alloy and NiFeCH, the NiFe/NiFeCH/CC heterostructure exhibits outstanding oxygen evolution reaction (OER) performance with a low overpotential of 190 mV at 10 mA cm^-2 after a stability test for 150 h. Notably, when the NiFe/NiFeCH/CC heterostructure is used as both the anode and cathode simultaneously, it merely requires a cell voltage of 1.49 V for the overall water splitting and 1.39 V for urea electrolysis at 10 mA cm^-2 with excellent durability. Thus, this work not just provides the application of NiFe-based catalysts in overall water splitting, but also offers a viable method for the treatment of urea-rich wastewater.

Designing a Built-In Electric Field for Efficient Energy Electrocatalysis

To utilize intermittent renewable energy as well as achieve the goals of peak carbon dioxide emissions and carbon neutrality, various electrocatalytic devices have been developed. However, the electrocatalytic reactions, e.g., hydrogen evolution reaction/oxygen evolution reaction in overall water splitting, polysulfide conversion in lithium-sulfur batteries, formation/decomposition of lithium peroxide in lithium-oxygen batteries, and nitrate reduction reaction to degrade sewage, suffer from sluggish kinetics caused by multielectron transfer processes. Owing to the merits of accelerated charge transport, optimized adsorption/desorption of intermediates, raised conductivity, regulation of the reaction microenvironment, as well as ease to combine with geometric characteristics, the built-in electric field (BIEF) is expected to overcome the above problems. Here, we give a Review about the very recent progress of BIEF for efficient energy electrocatalysis. First, the construction strategies and the characterization methods (qualitative and quantitative analysis) of BIEF are summarized. Then, the up-to-date overviews of BIEF engineering in electrocatalysis, with attention on the electron structure optimization and reaction microenvironment modulation, are analyzed and discussed in detail. In the end, the challenges and perspectives of BIEF engineering are proposed. This Review gives a deep understanding on the design of electrocatalysts with BIEF for next-generation energy storage and electrocatalytic devices.

Progress in Hydrogen Production Coupled with Electrochemical Oxidation of Small Molecules

The electrochemical oxidation of small molecules to generate value-added products has gained enormous interest in recent years because of the advantages of benign operation conditions, high conversion efficiency and selectivity, the absence of external oxidizing agents, and eco-friendliness. Coupling the electrochemical oxidation of small molecules to replace oxygen evolution reaction (OER) at the anode and the hydrogen evolution reaction (HER) at the cathode in an electrolyzer would simultaneously realize the generation of high-value chemicals or pollutant degradation and the highly efficient production of hydrogen. This Minireview presents an introduction on small-molecule choice and design strategies of electrocatalysts as well as recent breakthroughs achieved in the highly efficient production of hydrogen. Finally, challenges and future orientations are highlighted.

Hollow NiCoP Nanoprisms Derived from Prussian Blue Analogues as Bifunctional Electrocatalysts for Urea-Assisted Hydrogen Production in Alkaline Media

Integrating the hydrogen evolution reaction (HER) and urea oxidation reaction (UOR) is an energy-saving approach for electrolytic H₂ production. Here, hollow NiCoP nanoprisms are derived from Prussian blue analogues by a combined self-template coordination reaction and gas-phase phosphorization strategy. Benefiting from the strong electron interaction, unique hollow nanostructure, and enhanced mass/charge transfer, NiCoP nanoprisms display outstanding alkaline HER and UOR performance. Specifically, low potentials of -0.052, -0.115, and -0.159 V for HER and ultralow potentials of 1.30, 1.36, and 1.42 V for UOR at current densities of 10, 50, and 100 mA cm^-2 are obtained. Moreover, in a urea-assisted water electrolysis system, NiCoP nanoprisms only require cell voltages of 1.36, 1.49, and 1.57 V to offer current densities of 10, 50, and 100 mA cm^-2 , about 170, 180, and 200 mV less than the traditional water electrolysis. Theoretical calculations indicate the Co substitution in Ni₂ P promotes the adsorption and dissociation of water molecules, optimizes the desorption energy of active hydrogen atoms, and enhances the adsorption of urea molecules, thus accelerating the kinetics of HER and UOR. This work facilitates the application of hollow bimetallic phosphides in electrochemical preparation of clean energy and provides a successful paradigm for urea-rich wastewater electrolysis.

Innovative Electrochemical Strategies for Hydrogen Production: From Electricity Input to Electricity Output

Renewable H₂ production by water electrolysis has attracted much attention due to its numerous advantages. However, the energy consumption of conventional water electrolysis is high and mainly driven by the kinetically inert anodic oxygen evolution reaction. An alternative approach is the coupling of different half-cell reactions and the use of redox mediators. In this review, we, therefore, summarize the latest findings on innovative electrochemical strategies for H₂ production. First, we address redox mediators utilized in water splitting, including soluble and insoluble species, and the corresponding cell concepts. Second, we discuss alternative anodic reactions involving organic and inorganic chemical transformations. Then, electrochemical H₂ production at both the cathode and anode, or even H₂ production together with electricity generation, is presented. Finally, the remaining challenges and prospects for the future development of this research field are highlighted.