Arylamine-Linked 2D Covalent Organic Frameworks for Efficient Pseudocapacitive Energy Storage

Self-Exfoliating Benzotristriazine Macrocyclic Network: A New 2D Material for High-Performance Electrochemical Energy Storage

Aza-fused aromatic π-conjugated networks are an important class of 2D graphitic analogs, which are generally constructed using aromatic precursors. Herein, the study describes a new synthetic approach and electrochemical properties of a self-exfoliating benzotristriazine 2D network (BTTN) constructed using aliphatic precursors, under relatively mild conditions. The obtained BTTN exhibits a nanodisc-like morphology, the self-exfoliation tendency of which is ascribed to the presence of structurally different macrocycles with high electronic repulsion between the layers. The benzotristriazine repeat units of BTTN is electroactive and holds higher carbon/nitrogen ratio when compared with the conventional graphitic aza-fused π-conjugated networks. The self-exfoliated BTTN nanodiscs show excellent electrochemical energy storage of 485 and 333 F g-1 at 1 A g-1 in three-electrode and two-electrode measurements, respectively. BTTN in a symmetric coin-cell architecture exhibits a high specific energy value of 46 Wh kg-1 at a power density of 1 kW kg-1 and shows excellent cyclic stability of 96% for 10 000 and 90% for 30 000 charge-discharge cycles at a higher current density of 5 A g-1, surpassing the device performance of most of the reported all-organic pseudocapacitive 2D networks.

Covalent-Organic-Framework-Modified Quartz Crystal Microbalance Sensor for Selective Detection of Hazardous Formic Acid

Covalent organic frameworks (COFs) are a novel family of porous crystalline materials utilized in various advanced applications. However, applying COFs as a hazardous organic acid gas sensor is substantial but still challenging. Herein, a phenylenediamine-based covalent organic framework (TPDA-TPB COF) featuring excellent crystallinity, ultrastable thermal stability, and high surface area was successfully constructed. Then, the TPDA-TPB COF-modified quartz crystal microbalance (QCM) sensor is fabricated by immobilizing the TPDA-TPB COF thin film on the gold-QCM chip. The fabricated TPDA-TPB COF-modified QCM sensor demonstrates a rapid response, excellent reproducibility, high selectivity, and sensitivity to formic gas, arising from hydrogen-bonding interactions between formic acid and the outermost layer of the TPDA-TPB COF, as determined by extensive analysis and density functional theory calculations. The basic sites of the TPDA-TPB COF, which are numerous due to its high nitrogen content, and the carboxylic acid groups present in formic acid exhibit efficient interactions. The sensitivity of the TPDA-TPB COF-modified QCM sensor was found to be 7.75 Hz ppm-1 at standard room temperature and pressure conditions, with a limit of detection (LOD) of formic acid down to 1.18 ppm, which is significantly below the workplace olfactory threshold limit of 5.0 ppm established by the Occupational Safety and Health Administration. The TPDA-TPB COF-modified QCM sensor exhibits remarkable detecting capabilities, making it highly attractive for detecting organic acid vapors in diverse applications that require superior performance.

Dynamic Covalent Chemistry of Enamine-Ones: Exploring Tunable Reactivity in Vitrimeric Polymers and Covalent Organic Frameworks

Dynamic covalent chemistry (DCC) has revolutionized the field of polymer science by offering new opportunities for the synthesis, processability, and recyclability of polymers as well as in the development of new materials with interesting properties such as vitrimers and covalent organic frameworks (COFs). Many DCC linkages have been explored for this purpose, but recently, enamine-ones have proven to be promising dynamic linkages because of their facile reversible transamination reactions under thermodynamic control. Their high stability, stimuli-responsive properties, and tunable kinetics make them promising dynamic cross-linkers in network polymers. Given the rapid developments in the field in recent years, this review provides a critical and up-to-date overview of recent developments in enamine-one chemistry, including factors that control their dynamics. The focus of the review will be on the utility of enamine-ones in designing a variety of processable and self-healable polymers with important applications in vitrimers and recyclable closed-loop polymers. The use of enamine-one linkages in crystalline polymers, known as COFs and their applications are also summarized. Finally, we provide an outlook for future developments in this field.

Precisely Engineering Asymmetric Atomic CoN4 by Electron Donating and Extracting for Oxygen Reduction Reaction

The development of nonpyrolytic catalysts featuring precisely defined active sites represents an effective strategy for investigating the fundamental relationship between the catalytic activity of oxygen reduction reaction (ORR) catalysts and their local coordination environments. In this study, we have synthesized a series of model electrocatalysts with well-defined CoN4 centers and nonplanar symmetric coordination structures. These catalysts were prepared by a sequential process involving the chelation of cobalt salts and 1,10-phenanthroline-based ligands with various substituent groups (phen(X), where X=OH, CH3, H, Br, Cl) onto covalent triazine frameworks (CTFs). By modulating the electron-donating or electron-withdrawing properties of the substituent groups on the phen-based ligands, the electron density surrounding the CoN4 centers was effectively controlled. Our results demonstrated a direct correlation between the catalytic activity of the CoN4 centers and the electron-donating ability of the substituent group on the phenanthroline ligands. Notably, the catalyst denoted as BCTF-Co-phen(OH), featuring the electron-donating OH group, exhibited the highest ORR catalytic activity. This custom-crafted catalyst achieved a remarkable half-wave potential of up to 0.80 V vs. RHE and an impressive turnover frequency (TOF) value of 47.4×10-3 Hz at 0.80 V vs. RHE in an alkaline environment.

Insoluble low-impedance organic battery cathode enabled by graphite grafting towards potassium storage

Organic electrode materials are extensively applied for potassium storage as their sustainability and low cost. However, the organic electrodes' (i) solubility (such as naphthalene-1,4,5,8-tetracarboxylic dianhydride, NTCDA; 2,6-diaminoanthanthraquinone, DAQ, which are easily soluble in organic solvents) and (ii) intrinsic poor conductivity often result in high impedance and inferior electrochemical performance. Herein, the monomers of NTCDA and DAQ were polymerized (PND) to obtain an insoluble organic cathode, and a 5 wt% graphite (G) was also used to graft the PND sheet and increase its conductivity. Consequently, the as-prepared organic cathode (PND-G) achieved a long-life cycling performance of over 1500 cycles at 100 mA g-1. This work may provide guidelines for designing and developing insoluble and high conductive organic electrode materials.

Solvent Effects on Metal-free Covalent Organic Frameworks in Oxygen Reduction Reaction

Binding water molecules to polar sites in covalent organic frameworks (COFs) is inevitable, but the corresponding solvent effects in electrocatalytic process have been largely overlooked. Herein, we investigate the solvent effects on COFs for catalyzing the oxygen reduction reaction (ORR). Our designed COFs incorporated different kinds of nitrogen atoms (imine N, pyridine N, and phenazine N), enabling tunable interactions with water molecules. These interactions play a crucial role in modulating electronic states and altering the catalytic centers within the COFs. Among the synthesized COFs, the one with pyridine N atoms exhibits the highest activity, with characterized by a half-wave potential of 0.78 V and a mass activity of 0.32 A mg-1, which surpass those from other metal-free COFs. Theoretical calculations further reveal that the enhanced activity can be attributed to the stronger binding ability of *OOH intermediates to the carbon atoms adjacent to the pyridine N sites. This work sheds light on the significance of considering solvent effects on COFs in electrocatalytic systems, providing valuable insights into their design and optimization for improved performance.

Fine-tuning the pore environment of ultramicroporous three-dimensional covalent organic frameworks for efficient one-step ethylene purification

The construction of functional three-dimensional covalent organic frameworks (3D COFs) for gas separation, specifically for the efficient removal of ethane (C2H6) from ethylene (C2H4), is significant but challenging due to their similar physicochemical properties. In this study, we demonstrate fine-tuning the pore environment of ultramicroporous 3D COFs to achieve efficient one-step C2H4 purification. By choosing our previously reported 3D-TPB-COF-H as a reference material, we rationally design and synthesize an isostructural 3D COF (3D-TPP-COF) containing pyridine units. Impressively, compared with 3D-TPB-COF-H, 3D-TPP-COF exhibits both high C2H6 adsorption capacity (110.4 cm3 g-1 at 293 K and 1 bar) and good C2H6/C2H4 selectivity (1.8), due to the formation of additional C-H···N interactions between pyridine groups and C2H6. To our knowledge, this performance surpasses all other reported COFs and is even comparable to some benchmark porous materials. In addition, dynamic breakthrough experiments reveal that 3D-TPP-COF can be used as a robust absorbent to produce high-purity C2H4 directly from a C2H6/C2H4 mixture. This study provides important guidance for the rational design of 3D COFs for efficient gas separation.

Metal-Coordinated Covalent Organic Frameworks as Advanced Bifunctional Hosts for Both Sulfur Cathodes and Lithium Anodes in Lithium-Sulfur Batteries

The shuttling of polysulfides on the cathode and the uncontrollable growth of lithium dendrites on the anode have restricted the practical application of lithium-sulfur (Li-S) batteries. In this study, a metal-coordinated 3D covalent organic framework (COF) with a homogeneous distribution of nickel-bis(dithiolene) and N-rich triazine centers (namely, NiS4-TAPT) was designed and synthesized, which can serve as bifunctional hosts for both sulfur cathodes and lithium anodes in Li-S batteries. The abundant Ni centers and N-sites in NiS4-TAPT can greatly enhance the adsorption and conversion of the polysulfides. Meanwhile, the presence of Ni-bis(dithiolene) centers enables uniform Li nucleation at the Li anode, thereby suppressing the growth of Li dendrites. This work demonstrated the effectiveness of integrating catalytic and adsorption sites to optimize the chemical interactions between host materials and redox-active intermediates, potentially facilitating the rational design of metal-coordinated COF materials for high-performance secondary batteries.

Accessible Tetrathiafulvalene Moieties in a 3D Covalent Organic Framework for Enhanced Near-Infrared Photo-Thermal Conversion and Photo-Electrical Response

Redox-active tetrathiafulvalene (TTF)-based covalent organic frameworks (COFs) exhibit distinctive electrochemical and photoelectrical properties, but their prevalent two-dimensional (2D) structure with densely packed TTF moieties limits the accessibility of redox center and constrains their potential applications. To overcome this challenge, an 8-connected TTF linker (TTF-8CHO) is designed as a new building block for the construction of three-dimensional (3D) COFs. This approach led to the successful synthesis of a 3D COF with the bcu topology, designated as TTF-8CHO-COF. In comparison to its 2D counterpart employing a 4-connected TTF linker, the 3D COF design enhances access to redox sites, facilitating controlled oxidation by I2 or Au3+ to tune physical properties. When irradiated with a 0.7 W cm-2 808 nm laser, the oxidized 3D COF samples (I X - ${\mathrm{I}}_{\mathrm{X}}^{-}$ @TTF-8CHO-COF and Au NPs@TTF-8CHO-COF) demonstrated rapid temperature increases of 239.3 and 146.1 °C, respectively, which surpassed those of pristine 3D COF (65.6 °C) and the 2D COF counterpart (6.4 °C increment after I2 treatment). Furthermore, the oxidation of the 3D COF heightened its photoelectrical responsiveness under 808 nm laser irradiation. This augmentation in photothermal and photoelectrical response can be attributed to the higher concentration of TTF·+ radicals generated through the oxidation of well-exposed TTF moieties.

Composite Flame Retardants Based on Conjugated Microporous Polymer Hollow Nanospheres with Excellent Flame Retardancy

The development of polymer materials with excellent flame retardancy has been paid increasing attention for their valuable applications in saving energy in modern architecture. Herein, conjugated microporous polymers hollow nanospheres (CMPs-HNS) were prepared by Sonogashira-Hagihara cross-coupling reaction with 1,3,5-triacetylenebenzene, 3-amino-2,6-dibromopyridine, and 2,4,6-tribromoaniline as building blocks using SiO2 nanoparticles as hard templates. To enhance the flame-retardant performance of the CMPs-HNS, antimony pentoxide solution (Sb2O5) and bisphenol A-bis (diphenyl phosphate) (BDP) were coated onto the as-prepared CMP-HNS (CMPs-HNS-BSb) by a simple immersion method. The peak heat release (pHRR) from microscale combustion colorimeter (MCC) of CMPs-HNS-BSb was 76.5 and 73.05 W g-1, respectively. By introducing CMPs-HNS-BSb into the epoxy resin (EP) matrix, the CMP2-HNS-BSb/EP (0.5) composites show that the pHRR values were 809.3 and 645.2 kW m-2, reduced by 21% as measured by conical calorimetry (CC), and total heat release (THR) reduced by 29.7%, going from 101 to 70.8 MJ/m2 when compared to the pure sample. Besides, total smoke production (TSP) reduced about 23.7%. The hollow structure can enhance the thermal insulation performance. As measured, the thermal conductivity of CMP1-HNS-BSb and CMP2-HNS-BSb is 0.044 and 0.048 W m-1 K-1. Based on the advantages of simple manufacture, superior thermal insulation, and flame retardancy, our CMPs-HNS-BSb/EP composites may find useful applications in various aspects such as building energy saving in future development.

Inorganic-Organic Nanoarchitectonics: MXene/Covalent Organic Framework Heterostructure for Superior Microextraction

One of the difficulties limiting covalent organic frameworks (COFs) from becoming excellent adsorbents is their stacking/aggregation architectures owing to poor morphology/structure control during the synthesis process. Herein, an inorganic-organic nanoarchitectonics strategy to synthesize the MXene/COF heterostructure (Ti3 C2 Tx /TAPT-TFP) is developed by the assembly of β-ketoenamine-linked COF on the Ti3 C2 Tx MXene nanosheets. The as-prepared Ti3 C2 Tx /TAPT-TFP retains the 2D architecture and high adsorption capacity of MXenes as well as large specific surface area and hierarchical porous structure of COFs. As a proof of concept, the potential of Ti3 C2 Tx /TAPT-TFP for solid-phase microextraction (SPME) of trace organochlorine pesticides (OCPs) is investigated. The Ti3 C2 Tx /TAPT-TFP based SPME method achieves low limits of detection (0.036-0.126 ng g-1 ), wide linearity ranges (0.12-20.0 ng g-1 ), and acceptable repeatabilities for preconcentrating trace OCPs from fruit and vegetable samples. This study offers insights into the potential of constructing COF or MXene-based heterostructures for the microextraction of environmental pollutants.

Charging modulation of the pyridine nitrogen of covalent organic frameworks for promoting oxygen reduction reaction

Covalent organic frameworks (COFs) are ideal templates for constructing metal-free catalysts for the oxygen reduction reaction due to their highly tuneable skeletons and controllable porous channels. However, the development of highly active sites within COFs remains challenging due to their limited electron-transfer capabilities and weak binding affinities for reaction intermediates. Herein, we constructed highly active catalytic centres by modulating the electronic states of the pyridine nitrogen atoms incorporated into the frameworks of COFs. By incorporating different pyridine units (such as pyridine, ionic pyridine, and ionic imidazole units), we tuned various properties including dipole moments, reductive ability, hydrophilicity, and binding affinities towards reaction intermediates. Notably, the ionic imidazole COF (im-PY-BPY-COF) exhibited greater activity than the neutral COF (PY-BPY-COF) and ionic pyridine COF (ion-PY-BPY-COF). Specifically, im-PY-BPY-COF demonstrated a half-wave potential of 0.80 V in 0.1 M KOH, outperforming other metal-free COFs. Theoretical calculations and in situ synchrotron radiation Fourier transform infrared spectroscopy confirmed that the carbon atoms in the ionic imidazole rings improved the activity by facilitating binding of the intermediate OOH* and promoting the desorption of OH*. This study provides new insights into the design of highly active metal-like COF catalysts.

Unlocking Synthesis of Polyhedral Oligomeric Silsesquioxane-Based Three-Dimensional Polycubane Covalent Organic Frameworks

Reticular chemistry effectively yields porous structures with distinct topological lattices for a broad range of applications. Polyhedral oligomeric silsesquioxane (POSS)-based octatopic building blocks with a rare Oh symmetric configuration and attracting inorganic features have great potential for creating three-dimensional (3D) covalent organic frameworks (COFs) with new topologies. However, the intrinsic flexibility and intensive motion of cubane-type POSS molecules make the construction of 3D regular frameworks challenging. Herein, by fastening three or four POSS cores with per aromatic rigid linker from rational steric directions, we successfully developed serial crystalline 3D COFs with unpresented "the" and scu topologies. Both the experimental and theoretical results proved the formation of target 3D POSS-based COFs. The resultant hybrid networks with designable chemical skeletons and high surface areas maintain the superiorities of both the inorganic and organic components, such as their high compatibility with inorganic salts, abundant periodic electroactive sites, excellent thermal stability, and open multilevel nanochannels. Consequently, the polycubane COFs could serve as outstanding solid electrolytes with a high ionic conductivity of 1.23 × 10-4 S cm-1 and a lithium-ion transference number of 0.86 at room temperature. This work offers a pathway to generate ordered lattices with multiconnected flexible cube motifs and enrich the topologies of 3D COFs for potential applications.

Rapid Charge Transfer Enabled by Noncovalent Interaction through Guest Insertion in Supercapacitors based on Covalent Organic Frameworks

Covalent organic frameworks (COFs) have been proposed for electrochemical energy storage, although the poor conductivity resulted from covalent bonds limits their practical performance. Here, we propose to introduce noncovalent bonds in COFs through a molecular insertion strategy for improving the conductivity of the COFs as supercapacitor. The synthesized COFs (MI-COFs) establish equilibriums between covalent bonds and noncovalent bonds, which construct a continuous charge transfer channel to enhance the conductivity. The rapid charge transfer rate enables the COFs to activate the redox sites, bringing about excellent electrochemical energy storage behavior. The results show that the MI-COFs exhibit much better performance in specific capacitance and capacity retention rate than those of most COFs-based supercapacitors. Moreover, through simply altering inserted guests, the mode and strength of noncovalent bond can be adjusted to obtain different energy storage characteristics. The introduction of noncovalent bonds is an effective and flexible way to enhance and regulate the properties of COFs, providing a valuable direction for the development of novel COFs-based energy storage materials.

Recent advances in the utilization of covalent organic frameworks (COFs) as electrode materials for supercapacitors

Due to their excellent stability, ease of modification, high specific surface area, and tunable redox potentials, covalent organic frameworks (COFs) as potential electrodes in supercapacitors (SCs) have raised much research interest because these materials can enable the achievement of high electric double-layer supercapacitance and high pseudocapacitance. Here, the design strategies and SC applications of COF-based electrode materials are summarized. The detailed principles are introduced first, followed by discussions on strategies with diverse examples. The updated advances in design and applications are also discussed. Finally, in the outlook section, we provide some guidelines on the rational design of COF-based electrode materials for high-performance SCs, which we hope will inspire novel concepts for COF-based supercapacitors.

Exploration of the Performance and Mechanism of Uranium Adsorption by a Covalent Organic Framework Possessing the Thiazole Structure

This study prepared an active 2-D covalent organic skeleton (HDU-27) with a network structure, high crystallinity, considerable specific surface area, excellent pore structure, and excellent stability. Kinetic studies manifested that HDU-27 could effectively capture uranium as monolayer chemisorption within a very short kinetic equilibrium time (10 min). In particular, the temperature significantly and positively impacted the uranium adsorption performance of HDU-27. At 298, 313, and 328 K, the adsorption capacity reached 269.2, 488.8, and 576.2 mg g-1, respectively, suggesting the potential to treat high-temperature industrial wastewater containing uranium. HDU-27 had high stability and recoverability with an adsorption efficiency of 98.5% after five adsorption-desorption cycles. According to X-ray photoelectron spectroscopy, the mechanism of interaction between U(VI) and HDU-27 was mainly the chelation of UO22+ by the N atom in the thiazole structure and the strong coordination of the O atom in the keto structure with UO22+. More excitingly, HDU-27 could chemically reduce soluble U(VI) to insoluble U(IV) and release binding sites for the adsorption of additional U(VI). In conclusion, HDU-27 has outstanding potential for uranium adsorption from industrial wastewater containing uranium.

Poly(benzimidazobenzophenanthroline)-Ladder-Type Two-Dimensional Conjugated Covalent Organic Framework for Fast Proton Storage

Electrochemical proton storage plays an essential role in designing next-generation high-rate energy storage devices, e.g., aqueous batteries. Two-dimensional conjugated covalent organic frameworks (2D c-COFs) are promising electrode materials, but their competitive proton and metal-ion insertion mechanisms remain elusive, and proton storage in COFs is rarely explored. Here, we report a perinone-based poly(benzimidazobenzophenanthroline) (BBL)-ladder-type 2D c-COF for fast proton storage in both a mild aqueous Zn-ion electrolyte and strong acid. We unveil that the discharged C-O- groups exhibit largely reduced basicity due to the considerable π-delocalization in perinone, thus affording the 2D c-COF a unique affinity for protons with fast kinetics. As a consequence, the 2D c-COF electrode presents an outstanding rate capability of up to 200 A g-1 (over 2500 C), surpassing the state-of-the-art conjugated polymers, COFs, and metal-organic frameworks. Our work reports the first example of pure proton storage among COFs and highlights the great potential of BBL-ladder-type 2D conjugated polymers in future energy devices.

A Redox-Active Covalent Organic Framework with Highly Accessible Aniline-Fused Quinonoid Units Affords Efficient Proton Charge Storage

Owing to their intrinsic safety and sustainability, aqueous proton batteries have emerged as promising energy devices. Nevertheless, the corrosion or dissolution of electrode materials in acidic electrolytes must be addressed before practical applications. In this study, a cathode material based on a redox-active 2D covalent organic framework (TPAD-COF) with aniline-fused quinonoid units featuring inherently regular open porous channels and excellent stability is developed. The TPAD-COF cathode delivers a high capacity of 126 mAh g-1 at 0.2 A g-1 , paired with long-term cycling stability with capacity retention of 84% after 5000 cycles at 2 A g-1 . Comprehensive ex situ spectroscopy studies correlated with density functional theory (DFT) calculations reveal that both the -NH- and C=O groups of the aniline-fused quinonoid units exhibit prominent redox activity of six electrons during the charge/discharge processes. Furthermore, the assembled punch battery consisting of a TPAD-COF//anthraquinone (AQ) all-organic system delivers a discharge capacity of 115 mAh g-1 at 0.5 A g-1 after 130 cycles, implying the potential application of the TPAD-COF cathode in aqueous proton batteries. This study provides a new perspective on the design of electrode materials for aqueous proton batteries with long-term cycling performance and high capacity.

Extreme Ion-Transport Inorganic 2D Membranes for Nanofluidic Applications

Inorganic 2D materials offer a new approach to controlling mass diffusion at the nanoscale. Controlling ion transport in nanofluidics is key to energy conversion, energy storage, water purification, and numerous other applications wherein persistent challenges for efficient separation must be addressed. The recent development of 2D membranes in the emerging field of energy harvesting, water desalination, and proton/Li-ion production in the context of green energy and environmental technology is herein discussed. The fundamental mechanisms, 2D membrane fabrication, and challenges toward practical applications are highlighted. Finally, the fundamental issues of thermodynamics and kinetics are outlined along with potential membrane designs that must be resolved to bridge the gap between lab-scale experiments and production levels.

Modulating the Density of Catalytic Sites in Multiple-Component Covalent Organic Frameworks for Electrocatalytic Carbon Dioxide Reduction

It is generally assumed that the more metal atoms in covalent organic frameworks (COFs) contribute to higher activity toward electrocatalytic carbon dioxide reduction (CO2RR) and hindered us in exploring the correlation between the density of catalytic sites and catalytic performances. Herein, we have constructed quantitative density of catalytic sites in multiple COFs for CO2RR, in which the contents of phthalocyanine (H2Pc) and nickel phthalocyanine (NiPc) units were preciously controlled. With a molar ratio of 1/1 for the H2Pc and NiPc units in COFs, the catalyst achieved the highest selectivity with a carbon monoxide Faradaic efficiency (FECO) of 95.37% and activity with a turnover frequency (TOF) of 4713.53 h-1. In the multiple H2Pc/NiPc-COFs, the electron-donating features of the H2Pc units provide electron transport to the NiPc centers and thus improved the binding ability of CO2 and intermediates on the NiPc units. The theoretical calculation further confirmed that the H2Pc units donated their electrons to the NiPc units in the frameworks, enhanced the electron density of the Ni sites, and improved the binding ability with Lewis acidic CO2 molecules, thereby boosting the CO2RR performance. This study provides us with new insight into the design of highly active catalysts in electrocatalytic systems.

Covalent organic frameworks for CO2 capture: from laboratory curiosity to industry implementation

CO2 concentration in the atmosphere has increased by about 40% since the 1960s. Among various technologies available for carbon capture, adsorption and membrane processes have been receiving tremendous attention due to their potential to capture CO2 at low costs. The kernel for such processes is the sorbent and membrane materials, and tremendous progress has been made in designing and fabricating novel porous materials for carbon capture. Covalent organic frameworks (COFs), a class of porous crystalline materials, are promising sorbents for CO2 capture due to their high surface area, low density, controllable pore size and structure, and preferable stabilities. However, the absence of synergistic developments between materials and engineering processes hinders achieving the qualitative leap for net-zero emissions. Considering the lack of a timely review on the combination of state-of-the-art COFs and engineering processes, in this Tutorial Review, we emphasize the developments of COFs for meeting the challenges of carbon capture and disclose the strategies of fabricating COFs for realizing industrial implementation. Moreover, this review presents a detailed and basic description of the engineering processes and industrial status of carbon capture. It highlights the importance of machine learning in integrating simulations of molecular and engineering levels. We aim to stimulate both academia and industry communities for joined efforts in bringing COFs to practical carbon capture.

Single Site Coordination Enabled Construction of Metal-Diketimine-Linked Covalent Organic Frameworks for Boosted Electrooxidation of Biomass Derivative

Aromatic aldehydes are widely used for the construction of covalent organic frameworks (COFs). However, due to the high flexibility, high steric hindrance, and low reactivity, it remains challenging to synthesize COFs using ketones as building units, especially the highly flexible aliphatic ones. Here, the single nickel site coordination strategy is reported to lock the configurations of the highly flexible diketimine to transform discrete oligomers or amorphous polymers into highly crystalline nickel-diketimine-linked COFs (named as Ni-DKI-COFs). The strategy has been successfully extended to the synthesis of a series of Ni-DKI-COFs by the condensation of three flexible diketones with two tridentate amines. Thanks to the ABC stacking model with high amount and easily accessible single nickel (II) sites on their 1D channels, Ni-DKI-COFs are exploited as well-defined electrocatalyst platforms for efficiently electro-upgrading biomass-derived 5-Hydroxymethylfurfural (HMF) into value-added 2,5-furandicarboxylic acid (FDCA) with a 99.9% yield and a 99.5% faradaic efficiency as well as a high turnover frequency of 0.31 s-1 .

Adjusting the Stacking Model of Two-Dimensional Covalent Organic Frameworks for Volatile Acid Sensing via Spatial Effects

Covalent organic frameworks (COFs) are polymer networks with a precise structure and permanent porosity, making them an attractive platform for the detection of volatile analytes due to their chemical stability and accessible active sites. In this study, based on electron-rich N,N,N',N'-tetrakis(4-aminophenyl)-1,4-benzenediamine moiety, two 2D COFs with different topological structures and stacking models were designed by the strategy of spatial effect. The conductivity of the AB-stacked COF-NUST-20 was an order of magnitude higher than that of the AA-stacked COF-NUST-30. With the protonation of the imine bond, both COFs exhibited a strong, rapid, and reversible visible color change in response to corrosive HCl vapor. In addition, the AB-stacked COF-NUST-20, which facilitates both interlayer and intralayer charge transfer, shows better sensing performance. These findings demonstrate the usefulness of all-aromatic 2D COFs as real-time responsive chemosensors and provide insight into the design of sensing materials with high sensitivity.

Post-synthetic modification of covalent organic frameworks for CO2 electroreduction

To achieve high-efficiency catalysts for CO₂ reduction reaction, various catalytic metal centres and linker molecules have been assembled into covalent organic frameworks. The amine-linkages enhance the binding ability of CO₂ molecules, and the ionic frameworks enable to improve the electronic conductivity and the charge transfer along the frameworks. However, directly synthesis of covalent organic frameworks with amine-linkages and ionic frameworks is hardly achieved due to the electrostatic repulsion and predicament for the strength of the linkage. Herein, we demonstrate covalent organic frameworks for CO₂ reduction reaction by modulating the linkers and linkages of the template covalent organic framework to build the correlation between the catalytic performance and the structures of covalent organic frameworks. Through the double modifications, the CO₂ binding ability and the electronic states are well tuned, resulting in controllable activity and selectivity for CO₂ reduction reaction. Notably, the dual-functional covalent organic framework achieves high selectivity with a maximum CO Faradaic efficiency of 97.32% and the turnover frequencies value of 9922.68 h^-1, which are higher than those of the base covalent organic framework and the single-modified covalent organic frameworks. Moreover, the theoretical calculations further reveal that the higher activity is attributed to the easier formation of immediate *CO from COOH*. This study provides insights into developing covalent organic frameworks for CO₂ reduction reaction.

Constructing a 3D Covalent Organic Framework from 2D hcb Nets through Inclined Interpenetration

Three-dimensional covalent organic frameworks (3D COFs) have been of great interest due to their inherent numerous open sites and pore confinement effect. However, it has remained challenging to build 3D frameworks via interdigitation (also known as inclined interpenetration) by generating an entangled network formed by multiple 2D layers inclined with respect to each other. Herein, we report the first case of constructing a 3D COF, termed COF-904, through interdigitating 2D hcb nets, which was formed via [3+2] imine condensation reactions by the use of 1,3,5-triformylbenzene and 2,3,5,6-tetramethyl-1,4-phenylenediamine. The single-crystal structure of COF-904 is solved, and the locations of all non-hydrogen atoms are determined by 3D electron diffraction with a resolution up to 0.8 Å. These results not only broaden the strategy for achieving 3D COFs via interdigitation but also demonstrate that structurally complex extended frameworks can arise from simple molecules.

Modulating covalent organic frameworks with accessible carboxyl to boost superior extraction of polar nitrobenzene compounds from matrix-complicated beverages

The wide use and high polarity of nitrobenzene compounds (NBCs) have caused a concern for their residues in daily beverages. Herein, the covalent organic frameworks (COFs) with abundant carboxyl were ingeniously designed by introducing a novel modulator, and further developed as solid phase microextraction (SPME) coatings. Due to the enhanced polar interaction, the extraction efficiencies of modified COF for NBCs were sharply increased. After coupling the high-performance SPME fiber with gas chromatograph-mass spectrometry (GC-MS), an ultrasensitive analytical method was developed, with a wide linear range (0.50-5000 ng/L), and low limits of detection (0.15-3.0 ng/L). More importantly, the method was highly feasible and practical, leading to the precise determinations of trace NBCs from variously matrix-complicated samples. This work provides a viable and efficacious approach for the extraction and analysis of polar pollutants form complicated matrices, and is of great significance for mild COF modification and its extended applications in analytical chemistry.

π-Electron-Extended Triazine-Based Covalent Organic Framework as Photocatalyst for Organic Pollution Degradation and H2 Production from Water

Herein, we report the efficient preparation of π-electron-extended triazine-based covalent organic framework (TFP-TPTPh COF) for photocatalysis and adsorption of the rhodamine B (RhB) dye molecule, as well as for photocatalytic hydrogen generation from water. The resultant TFP-TPTPh COF exhibited remarkable porosity, excellent crystallinity, high surface area of 724 m2 g−1, and massive thermal stability with a char yield of 63.41%. The TFP-TPTPh COF demonstrated an excellent removal efficiency of RhB from water in 60 min when used as an adsorbent, and its maximum adsorption capacity (Qm) of 480 mg g−1 is among the highest Qm values for porous polymers ever to be recorded. In addition, the TFP-TPTPh COF showed a remarkable photocatalytic degradation of RhB dye molecules with a reaction rate constant of 4.1 × 10−2 min−1 and an efficiency of 97.02% under ultraviolet–visible light irradiation. Furthermore, without additional co-catalysts, the TFP-TPTPh COF displayed an excellent photocatalytic capacity for reducing water to generate H2 with a hydrogen evolution rate (HER) of 2712 μmol g−1 h−1. This highly active COF-based photocatalyst appears to be a useful material for dye removal from water, as well as solar energy processing and conversion.

A carbon dot-based nanoscale covalent organic framework as a new emitter combined with a CRISPR/Cas12a-mediated electrochemiluminescence biosensor for ultrasensitive detection of bisphenol A

Exploring new highly efficient electrochemiluminescence (ECL) luminophores is a necessary condition for developing ultrasensitive ECL biosensors. Therefore, a luminescent carbon dot-based covalent organic framework (CD-COF) was prepared using aldehyde-based carbon dots (CDs) and 1,3,5-tris (4-aminophenyl) benzene (TPB). Because the CD-COF made the regular arrangement of CDs conducive to improving the ECL response, CD-COF had a higher ECL intensity and efficiency than CDs. What's more, the ECL intensity of the CD-COF/S₂O₈^2-/Bu₄N⁺ system was about 2.98, 7.50, and 28.08 times higher than those of the CD-COF/S₂O₈^2-, CDs/S₂O₈^2- and S₂O₈^2- systems, respectively. Considering the remarkable ECL performance, the CD-COF/S₂O₈^2-/Bu₄N⁺ system was employed combined with the CRISPR/Cas12a trans-cutting strategy to construct an "off-on" ECL biosensor for BPA detection. The proposed ECL biosensor exhibited excellent performance with a wide linear range from 1.0 × 10^-14 mol L^-1 to 1.0 × 10^-5 mol L^-1 with a low detection limit of 2.21 fM (S/N = 3) under the optimized conditions. The biosensor demonstrated that CD-COF can be used as an efficient ECL emitter, thus expanding the application field of COFs. In addition, the good stability and specificity of the biosensor enabled the rapid detection of BPA, which will provide valuable insights into promising ultrasensitive ECL biosensors.

Dandelion-like covalent organic frameworks with high-efficiency fluorescence for ratiometric sensing and visual tracking-by-detection of Fe3

Iron ions, one of the most common heavy metal pollutants in industrial waste materials, are continuously actively or passively delivered to the environment. Meanwhile, the importance of Fe³⁺ in biological processes in vivo can not be neglected due to its crucial role in maintaining normal physiological function. Therefore, a ratiometric fluorescence covalent organic framework (TD-COF) was constructed for tracking-by-detection of Fe³⁺. Alkynes-extended 1,3,6,8-tetrakis(4-ethynyl benzaldehyde)-pyrene (TEBPY) with complete planar structure and 2,5-dihydroxyterephthalohydrazide (DHTH) with functional group -OH were selected as the building blocks. The ratiometric fluorescence TD-COF with a dandelion-like structure exhibited its dual emission peaked at 510 nm and 630 nm. It displayed an obvious fluorescence color variation of yellow-red-black in the presence of Fe³⁺. Benefiting from the high luminescent efficiency (QY of 36.4%) and multiple identical binding sites, TD-COF exhibited a wide linear range to Fe³⁺ (0.005-50 μM) with a detection limit of 10.9 nM. Additionally, a smartphone visual sensing platform integrated with TD-COF was developed based on the color transformation and successfully applied to visual smart real-time monitoring Fe³⁺. More surprisingly, the maximum adsorption capacity of TD-COF towards Fe³⁺ was 833.3 mg/g due to the coordination interaction and cationic π-effect. The practicability of the smartphone-integrated ratiometric sensing platform for visual tracking-by-detection of Fe³⁺ was verified by choosing tap water as the actual sample, and the recoveries were calculated to be 98.71-100.88%. This work thus developed COF-based ratiometric sensing of Fe³⁺, which is an attractive candidate for further application in fluorescent sensing and visual monitoring.

Distributed Li-Ion Flux Enabled by Sulfonated Covalent Organic Frameworks for High-Performance Lithium Metal Anodes

Metallic Li is considered the most promising anode material for high-energy-density batteries owing to its high theoretical capacity and low electrochemical potential. However, inhomogeneous lithium deposition and uncontrollable growth of lithium dendrites result in low lithium utilization, rapid capacity fading, and poor cycling performance. Herein, two sulfonated covalent organic frameworks (COFs) with different sulfonated group contents are synthesized as the multifunctional interlayers in lithium metal batteries. The sulfonic acid groups in the pore channels can serve as Li-anchoring sites that effectively coordinate Li ions. These periodically arranged subunits significantly guide uniform Li-ion flux distribution, guarantee smooth Li deposition, and reduce lithium dendrite formation. Consequently, these characteristics afford an excellent quasi-solid-state electrolyte with a high ionic conductivity of 1.9 × 10^-3  S  cm^-1 at room temperature and a superior Li⁺⁺ transference number of 0.91. A Li/LiFePO₄ battery with the COF-based electrolyte exhibited dendrite-free Li deposition during the charge process, accompanied by no capacity decay after 100 cycles at 0.1 C.

Imine and imine-derived linkages in two-dimensional covalent organic frameworks

Covalent organic frameworks (COFs) are porous crystalline polymers that result from the formation of covalent bonds between precisely assembled organic units. Linkage chemistry is a crucial factor in the controllable synthesis and resulting physicochemical properties of COFs. Imine linkages are popular in the formation of polyfunctional two-dimensional (2D) COFs because they are formed easily with structural and functional diversity. There has been much recent interest in expanding beyond this to COFs with imine-derived linkages. This review highlights the development of chemistry to modify and prepare derivatives of imines within 2D COFs. We discuss the derivation of imine bonds via covalent and noncovalent bonding and the properties and potential applications of the resulting materials in order to provide a better understanding of the relationship between covalent linkages and overall performance for 2D COF materials.

Fluorinated covalent organic frameworks for efficient drug delivery

In this study, two novel fluorine-functionalized crystalline covalent organic frameworks (COFs), namely DF-TAPB-COF and DF-TATB-COF, were synthesized, and their ordered structure, porosity, suitable pore size, and abundant fluorine groups were expected to serve as effective carriers in drug delivery. The excellent cell viability of DF-TAPB-COF and DF-TATB-COF was verified using MTT assays. Both COFs exhibited very high loading capacities in terms of drug loading performance, in particular the drug loading rate of DF-TAPB-COF for 5-fluorouracil (5-FU) was up to 69%. They also exhibited efficient drug release performance in a simulated body fluid environment. Cell endocytosis experiments demonstrated that DF-TAPB-COF and DF-TATB-COF could be effectively endocytosed by cells. Hence, this study offers new insight into the design and development of COF-based drug carrier systems.

Fluorescence/Colorimetry/Smartphone Triple-Mode Sensing of Dopamine by a COF-Based Peroxidase-Mimic Platform

Simple and accurate monitoring of urinary dopamine (DA) concentration is significant, which is helpful for the assessment or exclusion of catecholamine-producing tumors, such as pheochromocytoma and paraganglioma. Herein, a fluorescence/colorimetry/smartphone triple-mode sensing platform for DA determination was constructed using copper ion (Cu²⁺)-modified hydrazone-linked covalent organic frameworks (Cu-BTA-COF). Cu-BTA-COF with 21.67 wt % copper content exhibited peroxidase-mimic activity. After adding H₂O₂ and 1,3-dihydroxynaphthalene, the Cu-BTA-COF platform can sensitively and selectively detect DA in three modes with consistent results. In fluorescence/colorimetry/smartphone modes, the linear ranges of DA were 1-10, 0.2-40, and 1-10 μM, with related detection limits of 7.2, 8.6, and 23 nM, respectively. Moreover, the Cu-BTA-COF platform can be explored for DA determination in human urine samples with satisfactory recoveries (97.6-100.4%) in all the three modes, suggesting the potential practical application of the Cu-BTA-COF platform for DA detection in urine.

Hydroxyl-Functionalized Covalent Organic Frameworks as High-Performance Supercapacitors

Covalent organic frameworks (COFs) have attracted significant interest because of their heteroatom-containing architectures, high porous networks, large surface areas, and capacity to include redox-active units, which can provide good electrochemical efficiency in energy applications. In this research, we synthesized two novel hydroxy-functionalized COFs-TAPT-2,3-NA(OH)_2, TAPT-2,6-NA(OH)₂ COFs-through Schiff-base [3 + 2] polycondensations of 1,3,5-tris-(4-aminophenyl)triazine (TAPT-3NH₂) with 2,3-dihydroxynaphthalene-1,4-dicarbaldehyde (2,3-NADC) and 2,6-dihydroxynaphthalene-1,5-dicarbaldehyde (2,6-NADC), respectively. The resultant hydroxy-functionalized COFs featured high BET-specific surface areas up to 1089 m² g^-1, excellent crystallinity, and superior thermal stability up to 60.44% char yield. When used as supercapacitor electrodes, the hydroxy-functionalized COFs exhibited electrochemical redox activity due to the presence of redox-active 2,3-dihydroxynaphthalene and 2,6-dihydroxynaphthalene in their COF skeletons. The hydroxy-functionalized COFs showed specific capacitance of 271 F g^-1 at a current density of 0.5 A g^-1 with excellent stability after 2000 cycles of 86.5% capacitance retention. Well-known pore features and high surface areas of such COFs, together with their superior supercapacitor performance, make them suitable electrode materials for use in practical applications.

CoN5 Sites Constructed by Anchoring Co Porphyrins on Vinylene-Linked Covalent Organic Frameworks for Electroreduction of Carbon Dioxide

Developing effective electrocatalysts for CO₂ reduction (CO₂ RR) is of critical importance for producing carbon-neutral fuels. Covalent organic frameworks (COFs) are an ideal platform for constructing catalysts toward CO₂ RR, because of their controllable skeletons and ordered pores. However, most of these COFs are synthesized from Co-porphyrins or phthalocyanines-based monomers, and the available building units and resulting catalytic centers in COFs are still limited. Herein, Co-N₅ sites are first developed through anchoring Co porphyrins on an olefin-linked COF, where the Co active sites are uniformly distributed in the hexagonal networks. The strong electronic coupling between Co porphyrins and COF is disclosed by various characterizations such as X-ray absorption spectroscopy (XAS) and density functional theory calculation (DFT). Thanks to the CoN₅ sites, the catalytic COF shows remarkable catalytic activity with Faraday efficiencies (FE_CO ) of 84.2-94.3% at applied potentials between -0.50 and -0.80 V (vs RHE), and achieves a turnover frequency of 4578 h^-1 at -1.0 V. Moreover, the theoretical calculation further reveals that the CoN₅ sites enable a decrease in the overpotential for the formation COOH*. This work provides a design strategy to employ COFs as scaffold for fabricating efficient CO₂ electrocatalysts.

Novel thiophene-based donor-acceptor scaffolds as cathodes for rechargeable aqueous zinc-ion hybrid supercapacitors

Well-defined π-conjugated thiophene donor-acceptor molecules play an important role in different fields ranging from synthetic chemistry to materials science. Their chemical structure provides specific electronic and physicochemical properties, which can be further tuned by the introduction of functional groups. Herein, we design and synthesize two novel thiophene-based π-conjugated donor-acceptor molecules TDA-1 and TDA-2 through Aldol and Knoevenagel condensations. In our proof-of-concept study we report for the first time on the use of small organic molecules employed in aqueous zinc-ion hybrid supercapacitors (Zn-HSCs),which exhibit capacitance as high as 206.7 and 235.2 F g^-1 for TDA-1, and TDA-2, respectively.

Installation of synergistic binding sites onto porous organic polymers for efficient removal of perfluorooctanoic acid

Herein, we report a strategy to construct highly efficient perfluorooctanoic acid (PFOA) adsorbents by installing synergistic electrostatic/hydrophobic sites onto porous organic polymers (POPs). The constructed model material of PAF-1-NDMB (NDMB = N,N-dimethyl-butylamine) demonstrates an exceptionally high PFOA uptake capacity over 2000 mg g-1, which is 14.8 times enhancement compared with its parent material of PAF-1. And it is 32.0 and 24.1 times higher than benchmark materials of DFB-CDP (β-cyclodextrin (β-CD)-based polymer network) and activated carbon under the same conditions. Furthermore, PAF-1-NDMB exhibits the highest k2 value of 24,000 g mg-1 h-1 among all reported PFOA sorbents. And it can remove 99.99% PFOA from 1000 ppb to <70 ppt within 2 min, which is lower than the advisory level of Environmental Protection Agency of United States. This work thus not only provides a generic approach for constructing PFOA adsorbents, but also develops POPs as a platform for PFOA capture.

Fused-Ring-Linked Covalent Organic Frameworks

The development of linkage chemistry in the research area of covalent organic frameworks (COFs) is fundamentally important for creating robust structures with high crystallinity and diversified functionality. We reach herein a new level of complexity and controllability in linkage chemistry by achieving the first synthesis of fused-ring-linked COFs. A series of bicyclic pyrano[4,3-b]pyridine COFs have been constructed via a cascade protocol involving Schiff-base condensation, intramolecular [4 + 2] cycloaddition, and dehydroaromatization. With a broad scope of Brønsted or Lewis acids as the catalyst, the designed monomers, that is, O-propargylic salicylaldehydes and multitopic anilines, were converted into the fused-ring-linked frameworks in a one-pot fashion. The obtained COFs exhibited excellence in terms of purity, stability, and crystallinity, as comprehensively characterized by solid-state nuclear magnetic resonance (NMR) spectroscopy, powder X-ray diffraction, high-resolution transmission electron microscopy, and so on. Specifically, the highly selective formation (>94%) of pyrano[4,3-b]pyridine linkage was verified by quantitative NMR measurements combined with ¹³C-labeling synthesis. Moreover, the fused-ring linkage possesses fully locked conformation, which benefits to the high crystallinity observed for these COFs. Advancing the linkage chemistry from the formation of solo bonds or single rings to that of fused rings, this study has opened up new possibilities for the concise construction of sophisticated COF structures with high controllability.

Ruthenium Complex of sp2 Carbon-Conjugated Covalent Organic Frameworks as an Efficient Electrocatalyst for Hydrogen Evolution

It is still a great challenge to explore hydrogen evolution reaction (HER) electrocatalysts with both lower overpotential and higher stability in acidic electrolytes. In this work, an efficient HER catalyst, Ru@COF-1, is prepared by complexation of triazine-cored sp² carbon-conjugated covalent organic frameworks (COFs) with ruthenium ion. Ru@COF-1 possesses high crystallinity and porosity, which are beneficial for electrocatalysis. The large specific surface area and regular porous channels of Ru@COF-1 facilitate full contact between reactants and catalytic sites. The nitrogen atoms of triazines are protonated in the acidic media, which greatly improve the conductivity of Ru@COF-1. This synergistic effect makes the overpotential of Ru@COF-1 about 200 mV at 10 mA cm^-2 , which is lower than other reported COFs-based electrocatalysts. Moreover, Ru@COF-1 exhibits exceptionally electrocatalytic durability in the acidic electrolytes. It is particularly stable and remains highly active after 1000 cyclic voltammetry cycles. Density functional theory calculations demonstrate that tetracoordinated Ru-N₂ Cl₂ moieties are the major contributors to the outstanding HER performance. This work provides a new idea for developing protonated HER electrocatalysts in acidic media.

Porous organic polymers for high-performance supercapacitors

With the aim of addressing the global warming issue and fossil energy shortage, eco-friendly and sustainable renewable energy technologies are urgently needed. In comparison to energy conversion, studies on energy storage fall behind and remain largely to be explored. By storing energy from electrochemical processes at the electrode surface, supercapacitors (SCs) bridge the performance gap between electrostatic double-layer capacitors and batteries. Organic electrode materials have drawn extensive attention because of their special power density, good round trip efficiency and excellent cycle stability. Porous organic polymers (POPs) have drawn extensive attention as attractive electrode materials in SCs. In this review, we present and discuss recent advancements and design principles of POPs as efficient electrode materials for SCs from the perspectives of synthetic strategies and the structure-performance relationships of POPs. Finally, we put forward the outlook and prospects of POPs for SCs.

2D Conjugated Covalent Organic Frameworks: Defined Synthesis and Tailor-Made Functions

ConspectusCovalent organic frameworks (COFs) are an emerging class of crystalline porous polymers and have received tremendous attention and research interest. COFs can be classified into two-dimensional (2D) and three-dimensional (3D) analogues. Resembling the architectures of porous graphene, 2D conjugated COFs have exhibited promising prospects in many fields, such as gas storage and separation, heterogeneous catalysis, sensing, photocatalysis, environmental remediation, drug delivery, energy storage and conversion, and so forth. However, efficient structural design for high-throughput production of crystalline 2D COFs remains challenging.In this Account, we summarize our recent contributions to the design, synthesis, and application exploration of 2D conjugated COFs. First, we raised an efficient "two-in-one" strategy for the facile synthesis of 2D imine COFs with good reproducibility and solvent adaptability. Thanks to this elaborate molecular design strategy, we could easily modulate the topology of COFs and fabricate COF films. In addition, we developed two approaches to stabilize the 2D conjugated COFs by using planar building blocks and donor-acceptor structures. We also proposed a skeleton engineering strategy to design COFs as electrode materials, through which redox-active orthoquinone moieties were stepwise-incorporated in the skeletons of isostructural 2D imine-linked COFs. This strategy enabled systematic investigations on a series of 2D conjugated COFs with analogous structures but different numbers of active sites for energy storage, which provides a good platform to unveil the underlying structure-property relationships. In addition, we recently developed a new kind of arylamine-linked 2D conjugated COFs. The electroactive diphenylamine linkages endowed these 2D conjugated COFs with extended conjugation and improved stability, which also conferred these COFs with excellent pseudocapacitive energy storage performance. Moreover, tailor-made sulfur-rich COFs were introduced that were synthesized by selective introduction of polysulfide or sulfonyl groups on the COF skeletons and were used for Li storage and proton conduction. At the end, the key challenges of 2D conjugated COFs toward practical applications and their future prospects are suggested. We hope that this Account will evoke new inspirations and innovative work in the field of 2D conjugated COFs in the near future, especially in some burgeoning and interdisciplinary research areas.

Constructing Stable Chromenoquinoline-Based Covalent Organic Frameworks via Intramolecular Povarov Reaction

Chemically stable chromenoquinoline (CQ)-based covalent organic frameworks (COFs) were constructed by postsynthetic conversion of imine COFs. The key step of an intramolecular Povarov reaction can transform a preintegrated alkyne group to bridge the benzene rings on both sides of the imine linkage via chemical bonds, affording a ladder-type CQ linkage. This novel approach achieves a high cyclization degree of 80-90%, which endows the CQ-COFs with excellent chemical stability toward strong acid, base, and redox reagents. The synthetic approach can be applied to various monomers with different symmetries and functional core moieties. The absorption and fluorescence intensities of CQ-COFs are sensitive to acid, which allows for dual-mode sensing of strongly acidic environments.