Novel sheet-like bismuth subcarbonate-zinc ferrite (Bi2 O2 CO3 /ZnFe2 O4 ) magnetically recyclable nanocomposites: Synthesis, characterization and enhanced catalytic performance for the reduction of nitrophenols and nitroanilines

Exploring the potential of surface-modified alginate beads for catalytic removal of environmental pollutants and hydrogen gas generation

In this study, hydrogel beads were fabricated using alginate (Algt) polymer containing dispersed nickel phthalocyanine (NTC) nanomaterial. The viscous solution of Algt and NTC was poured dropwise into a divalent Ca2+ ions, resulting in the formation of hydrogel beads known as NTC@Algt-BDs. The surface of the NTC@Algt-BDs was further modified by coating them with different types of metal ions, yielding metal-coated M+/NTC@Algt-BDs. The adsorbed metal ions i.e., Cu+2, Ag+, Ni+2, Co+2, and Fe+3 were subsequently reduced to zero-valent metal nanoparticles (M0) by NaBH4. The prepared beads were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Initially, M0/NTC@Algt-BDs were examined for the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). Among them, Cu0/NTC@Algt-BDs catalyst exhibited the highest reduction rate and therefore, investigated for reduction of different nitrophenols (NPs) and dyes, including 2-nitrophenol (2-NP), 2,6-dinitrophenol (2,6-DNP), methyl orange (MO), potassium ferrocyanide (PFC), congo red (CR), and acridine orange (ArO). The highest reduction rates of 2.019 and 1.394 min-1 were observed for MO and 2-NP, respectively. Furthermore, the fabricated catalysts were employed for the efficient production of H2 gas by NaBH4 methanolysis. Among which the Ag0/NTC@Algt-BDs catalyst showed excellent catalytic production of H2 gas, exhibiting the lowest activation energy (Ea) of 25.169 kJ/mol at ambient temperature. Furthermore, the impact of NaBH4 amount, and catalyst dosage on the reduction of 2-NP and H2 gas production was conducted whereas the effect of temperature on methanolysis of NaBH4 for evolution of H2 gas was studied. The amount of H2 gas was confirmed by GC-TCD system. Additionally, the recyclability of the catalyst was investigated, as it garnered significant research interest.

In Situ Polycondensation Synthesis of NiS-g-C3N4 Nanocomposites for Catalytic Hydrogen Generation from NaBH4

The nanocomposites of S@g-C₃N₄ and NiS-g-C₃N₄ were synthesized for catalytic hydrogen production from the methanolysis of sodium borohydride (NaBH₄). Several experimental methods were applied to characterize these nanocomposites such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and environmental scanning electron microscopy (ESEM). The calculation of NiS crystallites revealed an average size of 8.0 nm. The ESEM and TEM images of S@g-C₃N₄ showed a 2D sheet structure and NiS-g-C₃N₄ nanocomposites showed the sheet materials that were broken up during the growth process, revealing more edge sites. The surface areas were 40, 50, 62, and 90 m²/g for S@g-C₃N₄, 0.5 wt.% NiS, 1.0 wt.% NiS, and 1.5 wt.% NiS, respectively. The pore volume of S@g-C₃N₄ was 0.18 cm³, which was reduced to 0.11 cm³ in 1.5 wt.% NiS owing to the incorporation of NiS particles into the nanosheet. We found that the in situ polycondensation preparation of S@g-C₃N₄ and NiS-g-C₃N₄ nanocomposites increased the porosity of the composites. The average values of the optical energy gap for S@g-C₃N₄ were 2.60 eV and decreased to 2.50, 2.40, and 2.30 eV as the NiS concentration increased from 0.5 to 1.5 wt.%. All NiS-g-C₃N₄ nanocomposite catalysts had an emission band that was visible in the 410-540 nm range and the intensity of this peak decreased as the NiS concentration increased from 0.5 to 1.5 wt.%. The hydrogen generation rates increased with increasing content of NiS nanosheet. Moreover, the sample 1.5 wt.% NiS showed the highest production rate of 8654 mL/g·min due to the homogeneous surface organization.

Recyclable Mussel-Inspired Magnetic Nanocellulose@Polydopamine-Ag Nanocatalyst for Efficient Degradation of Refractory Organic Pollutants and Bacterial Disinfection

Development of a novel strategy to tackle bacterial-contaminated complex industrial wastewaters containing refractory organic pollutants is of great demand. In this study, polydopamine (PDA)-coated magnetic cellulose nanofiber (MCNF)-loaded silver nanoparticle (AgNP) (MCNF/PDA-Ag) nanocomposites were designed and applied for efficient degradation of organic dye pollutants and inactivation of Escherichia coli (E. coli) in wastewater. In the presence of NaBH₄, MCNF/PDA-Ag could achieve a high catalytic reduction rate of 6.54 min^-1 for the removal of methylene blue. Similarly, it showed good catalytic reduction performance for methyl orange (0.63 min^-1) and 4-nitrophenol (2.94 min^-1). The MCNF/PDA-Ag nanocomposites can be easily magnetically recycled and reused with negligible loss of catalytic performance. Moreover, this nanocatalyst also exhibited excellent disinfection performance against E. coli, with more than 99% disinfection ratio at very low doses (50 μg/mL). Overall, this work provides new insights into a delicate design of advanced magnetically recyclable silver nanocomposites with ultrahigh catalytic rates and excellent antibacterial properties from sustainable nature biomass.

Cobalt(ii) Schiff base chemically grafted onto magnetic amino-functionalized reduced graphene oxide nanosheets for highly rapid and selective removal of methyl orange

A magnetic graphene oxide functionalized with a Co(ii) Schiff base complex (Co(SB)-rGO/ZnFe₂O₄) was synthesized and applied as an ultrafast adsorbent to remove anionic organic dyes from water.