Isothermal and nonisothermal crystallization kinetics of poly(ϵ-caprolactone)

Tailor-Made, Linear, and “Comb-Like” Polyester-Based Copolymers: Synthesis, Characterization, and Thermal Behavior of Potential 3D-Printing/Electrospinning Candidates

Tailor-made, linear, and “comb-like” poly(ε-caprolactone)-based copolymers were synthesized by employing a combination of controlled polymerization techniques. Poly(dimethylsiloxane-block-ε-caprolactone) copolymers (SCL#) were synthesized by a combination of anionic and ring-opening polymerization (ROP), whereas “comb-like” poly(hydroxyethylmethacrylate-co-(hydroxyethylmethacrylate-graft-ε-caprolactone)-block-ε-caprolactone) (HEMACL#) were synthesized through simultaneous ROP and reversible addition fragmentation chain transfer (RAFT) polymerization. Copolymers were characterized by hydrogen nuclear magnetic resonance (1H-NMR), size exclusion chromatography (SEC), and Fourier transform infrared (FTIR) spectroscopy. All polymers exhibited narrow molar masses distributions (Mw/Mn<1.54), and their thermal properties were analyzed by isothermal crystallization kinetics (Avrami’s theory, by using differential scanning calorimetry (DSC)) and by employing modulated thermogravimetric analysis (MTGA). The macromolecular structure exerts a noticeable effect on the PCL block behavior when compared to the PCL homopolymer, at least for the temperature range studied (16–24°C): less differences in thermal properties were observed for linear block copolymers, whereas for “comb-like” graft copolymers their final crystallization capacity strongly depends on the presence of branches. For both sets of copolymers, the decrease in the resulting melting temperatures and the increase in the half-life crystallization time values might be useful processing parameters, particularly if these copolymers are planned for using as an alternative source of 3D printing or electrospinning materials.

Isothermal and Nonisothermal Crystallization Kinetics of Poly(ε-caprolactone) Blended with a Novel Ionic Liquid, 1-Ethyl-3-propylimidazolium Bis(trifluoromethanesulfonyl)imide

Recently, ionic liquids (ILs) and biodegradable polymers have become crucial functional materials in green sustainable science and technology. In this study, we investigated the influence of a novel IL, 1-ethyl-3-propylimidazolium bis(trifluoromethanesulfonyl)imide ([EPrI][TFSI]), on the crystallization kinetics of a widely studied biodegradable polymer, poly(ε-caprolactone) (PCL). To obtain a comprehensive understanding, both the isothermal and nonisothermal crystallization kinetics of the PCL blends were studied. Incorporating [EPrI][TFSI] reduced the isothermal and nonisothermal crystallization rates of PCL. Regarding isothermal crystallization, the small k and 1/t_0.5 values of the blend, estimated using the Avrami equation, indicated that [EPrI][TFSI] decreased the rate of isothermal crystallization of PCL. The Mo model adequately described the nonisothermal crystallization kinetics of the blends. Increasing the [EPrI][TFSI] content caused the rate-related parameter F(T) to increase. This indicated that the crystallization rate of PCL decreased when [EPrI][TFSI] was incorporated. The spherulite appearance temperature of the blending sample was found to be lower than that of neat PCL under a constant cooling rate. The analysis of the effective activation energy proposed that the nonisothermal crystallization of PCL would not be favorited when the [EPrI][TFSI] was incorporated into the blends. The addition of [EPrI][TFSI] would not change the crystal structures of PCL according to the results of wide angle X-ray diffraction. Fourier transform infrared spectroscopy suggested that interactions occurred between [EPrI][TFSI] and PCL. The crystallization kinetics of PCL were inhibited when [EPrI][TFSI] was incorporated.