Co-electrospun nanofibers of PVA-SbQ and Zein for wound healing

Characteristics, antimicrobial capacity, and antioxidant potential of electrospun zein/polyvinyl alcohol nanofibers containing thymoquinone and electrosprayed resveratrol nanoparticles

The aim of the present study was to fabricate, characterize, and evaluate the in vitro antimicrobial and antioxidant properties of zein/polyvinyl alcohol (ZN/PVA) nanofibers containing 2% and 4% of thymoquinone (TQ), either alone or in combination with electrosprayed ZN nanoparticles containing 1% and 2% of resveratrol (RS). According to scanning electron microscopy analysis, the diameter of nanofibers and nanoparticles increased with increasing TQ and RS concentrations, respectively. The molecular interaction between ZN or PVA polymers and TQ or RS was confirmed by Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the thermal stability of nanofibers did not change with the addition of TQ and RS. Moreover, incorporation of TQ in nanofibers along with RS nanoparticles increased their antibacterial and free radical scavenging activities based on broth dilution and DPPH methods, respectively (p ≤ .05). Escherichia coli O157:H7 (as a Gram-negative pathogenic bacteria) was more resistant to all treatments than Staphylococcus aureus (as a Gram-positive pathogenic bacteria). In addition, the combined use of TQ in nanofibers and RS nanoparticles had antagonistic antibacterial and synergistic antioxidant effects. The best results were obtained with ZN/PVA nanofiber containing 4% TQ and electrosprayed with 2% RS nanoparticles (p ≤ .05). According to the results of the present study, biodegradable ZN/PVA nanofiber containing TQ and electrosprayed with RS nanoparticles can be used as a novel active packaging material in the food industry.

Plant-Based, Hydrogel-like Microfibers as an Antioxidant Platform for Skin Burn Healing

Natural polymers from organic wastes have gained increasing attention in the biomedical field as resourceful second raw materials for the design of biomedical devices which can perform a specific bioactive function and eventually degrade without liberating toxic residues in the surroundings. In this context, patches and bandages, that need to support the skin wound healing process for a short amount of time to be then discarded, certainly constitute good candidates in our quest for a more environmentally friendly management. Here, we propose a plant-based microfibrous scaffold, loaded with vitamin C (VitC), a bioactive molecule which acts as a protecting agent against UV damages and as a wound healing promoter. Fibers were fabricated via electrospinning from various zein/pectin formulations, and subsequently cross-linked in the presence of Ca2+ to confer them a hydrogel-like behavior, which we exploited to tune both the drug release profile and the scaffold degradation. A comprehensive characterization of the physico-chemical properties of the zein/pectin/VitC scaffolds, either pristine or cross-linked, has been carried out, together with the bioactivity assessment with two representative skin cell populations (human dermal fibroblast cells and skin keratinocytes, HaCaT cells). Interestingly, col-1a gene expression of dermal fibroblasts increased after 3 days of growth in the presence of the microfiber extraction media, indicating that the released VitC was able to stimulate collagen mRNA production overtime. Antioxidant activity was analyzed on HaCaT cells via DCFH-DA assay, highlighting a fluorescence intensity decrease proportional to the amount of loaded VitC (down to 50 and 30%), confirming the protective effect of the matrices against oxidative stress. Finally, the most performing samples were selected for the in vivo test on a skin UVB-burn mouse model, where our constructs demonstrated to significantly reduce the inflammatory cytokines expression in the injured area (50% lower than the control), thus constituting a promising, environmentally sustainable alternative to skin patches.

Bi-layered disulfiram-loaded fiber membranes with antibacterial properties for wound dressing

In this study, the bi-layered disulfiram-loaded fiber membranes with the antibacterial activity and different surface wettabilities are prepared using electrospinning technology. In the application of wound dressing, the hydrophilic surface of fiber membranes is beneficial for cell adhesion and drug release to heal the wound. Meanwhile, the outside hydrophobic surface is able to block water penetration to reduce the probability of wound infection. The obtained bi-layered drug-loaded fiber membranes are composed of polyvinylidene fluoride (PVDF) bottom surface and disulfiram (DSF)/polylactic acid (PLA) top surface. To modify the top surface wettability, the oxygen plasma modification of bi-layered membranes was carried out. The morphology, wettability, and chemical compositions of bi-layered drug-loaded fiber membranes were analyzed using the scanning electronic microscope (SEM), drop shape analysis instrument, X-ray diffractometer (XRD), and X-ray photoelectron spectrometer (XPS). The bi-layered disulfiram-loaded membranes showed the potent antibacterial activity in vitro against both Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive). It was found that the bi-layered membranes had good biocompatibility with L929 cells. Thus, the obtained bi-layered disulfiram-loaded fiber membranes are suitable for wound dressing application.

Recent advances in PVA-polysaccharide based hydrogels and electrospun nanofibers in biomedical applications: A review

Among several types of carbohydrate polymers blend PVA hydrogel membranes used for biomedical applications in particular wound dressings; electrospun nanofibrous membranes have gained increased interest because of their extraordinary features e.g. huge surface area to volume ratio, high porosity, adequate permeability, excellent wound-exudates absorption capacity, architecture similarity with skin ECM and sustained release-profile over long time. In this study, modern perspectives of synthesized/developed electrospun nanofibrous hydrogel membranes based popular carbohydrate polymers blend PVA which recently have been employed for versatile biomedical applications particularly wound dressings, were discussed intensively and compared in detail with traditional fabricated membranes based films, as well. Clinically relevant and advantages of electrospun nanofibrous membranes were discussed in terms of their biocompatibility and easily fabrication and functionalization in different biomedical applications.

Specific adsorption of tetracycline from milk by using biocompatible magnetic molecular imprinting material and evaluation by ECD

Biocompatible magnetic molecularly imprinted polymers (BMMIPs) were prepared with Zein for the first time, and were used to enrich tetracycline compounds selectively. Innovative combination of BMMIPs and electrochemistry to obtain lower detection line to satisfy industrial detection demands. Using Zein as the crosslinking agent, the polymers were synthesized on the surface of Fe₃O₄ particles. The scanning electron microscope, transmission electron microscope and X-ray diffraction technologies were used to characterize BMMIPs. Through optimization, BMMIPs attained large adsorption capacity (236.40 mg/g) with fast kinetics (40 min) and followed the Langmuir isotherm and pseudo-second-order kinetic models. BMMIPs had good recognition ability, the selective factors of oxytetracycline, chlortetracycline, doxycycline were 4.78, 4.23, and 3.39, respectively. Excellent linearity was attained in the range of 0.025-500 μg/mL, with low detection limits and low quantitation limits of 0.025 and 0.083 μg/mL. According to our exploring, BMMIPs was ideal materials for enrichment of tetracycline in complex biological samples.

Emulsion Electrospun Fiber Mats of PCL/PVA/Chitosan and Eugenol for Wound Dressing Applications

In recent years, the damaging effects of antimicrobial resistance relating to wound management and infections have driven the ongoing development of composite wound dressing mats containing natural compounds, such as plant extracts and their derivatives. The present research reports the fabrication of novel electrospun Polycaprolactone (PCL)/Polyvinyl Alcohol (PVA)/Chitosan (CS) fiber mats loaded with Eugenol (EUG), an essential oil, known for its therapeutic properties. The electrospun fiber mats were prepared via electrospinning from either water-in-oil (W/O) or oil-in-water (O/W) emulsions and characterized using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), total porosity measurements, and water contact angle. The in vitro EUG release profile and antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa were also evaluated. The obtained results proved that the EUG was loaded efficiently into electrospun PCL/PVA/CS fiber mats and the two W/O and O/W emulsions prepared from the PCL/PVA/CS (7 : 3 : 1) and PCL/PVA/CS (3 : 7 : 1) revealed porosity within the ideal range of 60–90%, even when EUG was loaded. The measured contact angle values showed that the O/W emulsion exhibited a more hydrophilic character and the wettability noticeably decreased after adding EUG in both emulsion blends. Furthermore, the electrospun PCL/PVA/CS fiber mats demonstrated a rapid release of EUG during the first 8 hours, which enhanced gradually afterward (up to 120 hours). Moreover, an efficient antibacterial activity against S. aureus (inhibition ratios of 92.43% and 83.08%) and P. aeruginosa (inhibition ratios of 94.68% and 87.85%) was displayed and the in vitro cytotoxic assay demonstrated that the normal human dermal fibroblasts (NHDF) remained viable for at least 7 days, after direct contact with the produced electrospun fiber mats. Therefore, such findings support the biocompatibility and suitability of using these EUG-loaded electrospun PCL/PVA/CS fiber mats as a new innovative wound dressing material with potential for preventing and treating microbial wound infections.

Blood compatibility assessments of novel electrospun PVA/egg white nanocomposite membrane

In this study, a novel electrospun wound dressing based on polyvinyl alcohol (PVA) incorporated with egg white was fabricated. The fabricated scaffold was characterized using scanning electron microscopy, Fourier-transform infrared spectroscopy (FTIR) and contact angle measurement. Further, the coagulation assays were used to investigate the blood compatibility of the developed nanocomposites. The prepared PVA/egg white nanofibers exhibited reduced fiber and pore diameter in comparison to pristine PVA. The FTIR spectrum revealed the interaction between the PVA and egg white by the formation of the new characteristic peaks. Further, the wettability of the prepared nanocomposites was found to be increased with the mean contact angle of 54 ± 1·62°, indicating enhanced hydrophilic nature compared to pristine PVA (62 ± 1·19°). The coagulation assay results revealed that the prepared PVA/egg white nanocomposites showed delayed blood clotting, indicating better blood compatibility. Moreover, the hemolytic index of prepared PVA/egg white nanocomposites (0·94%) was observed to be low compared to pristine PVA (1·5%), suggesting its enhanced safety to red blood cells. Hence, the electrospun PVA/egg white nanocomposites exhibited better physicochemical properties and enhanced blood compatibility properties, which might serve as a valuable candidate for chronic wound healing applications.