Bead‐free and tough electrospun PCL /gelatin/ PGS ternary nanofibrous scaffolds for tissue engineering application

Heat-treated alginate-polycaprolactone core-shell nanofibers by emulsion electrospinning process for biomedical applications

Fabrication of Core-shell nanofibrous mat which is a promising tool for a wide range of applications in tissue engineering can be developed using water in oil (W/O) or oil in water (O/W) emulsion electrospinning. In this study, for the first time, we fabricated an O/W emulsion-based electrospun core-shell mat using polycaprolactone (PCL) as a core and the blend solution of alginate (Alg) and polyethylene oxide (PEO) as shell material. To achieve a stable core-shell mat, firstly, Alg was modified with heat treatment to decrease the molecular weight of Alg. Then, to improve the chain flexibility of Alg, PEO as a second polymer was added to facilitate its electrospinnability. The different volume ratios of O/W were then fabricated by adding PCL to the Alg-PEO solution to find an optimized emulsion solution. The morphology, swelling, and porosity of the construct were evaluated. At the same time, the mechanical characteristic of fibers was evaluated in both dry and wet conditions. This study also examined cell-scaffold interactions to address the need for a scaffolding material to be suitable for tissue engineering and biomedical applications. Finally, the result exhibited a distinct core-shell structure with better mechanical properties compared to the Alg-PEO.

Fortified electrospun collagen utilizing biocompatible Poly Glycerol Sebacate prepolymer (PGSp) and zink oxide nanoparticles (ZnO NPs) for diabetics wound healing: Physical, biological and animal studies

Collagen, a naturally occurring fibrous protein, is a potential resource of biological materials for tissue engineering and regenerative medicine because it is structurally biocompatible, has low immunogenicity, is biodegradable, and is biomimetic. Numerous studies have documented in the literature how Collagen nanofibers exhibit limited cell adhesion, poor viscosity, and no interior fibril structure. The biomedical industry is using Poly Glycerol Sebacate prepolymer(PGSp), a biodegradable and biocompatible polyester with high adhesion and very viscous appearance, more often. Here, unique electrospun Collagen/PGSp/ZnO/NPs blend nanofibers for skin tissue application were developed and described with varied PGSp percent. Additionally, when ternary blends of Collagen, PGSp, and Zink Oxide Nanoparticles (ZnO NPs) are used, the antibacterial properties of the scaffolds are improved. The bead-free electrospun nanofibers were produced by raising the PGSp concentration to 30%w/w. SEM, EDS, tensile, MTT, FTIR, SDS-page, swelling test, contact-angle, antimicrobial, biodegradation, XRD, and cell attachment procedures were used to characterize the crosslinked nanofibers. The ternary blend nanofibers with a weight ratio of Collagen/PGSp 30%/ZnONPs 1% had higher stress/strain strength (0.25 mm/mm), porosity (563), cell survival, and degradation time. Moreover, after applying for wound healing in diabetic rats, Collagen/PGSp 30%/could be show improving wound healing significantly compared to other groups.

Stress-Induced Intensification of Deoxyshikonin Production in Rindera graeca Hairy Root Cultures with Ester-Based Scaffolds

In vitro plant cell and tissue culture systems allow for controlling a wide range of culture environmental factors selectively influencing biomass growth and the yield of secondary metabolites. Among the most efficient methods, complex supplementation of the culture medium with elicitors, precursors, and other functional substances may significantly enhance valuable metabolite productivity through a stress induction mechanism. In the search for novel techniques in plant experimental biotechnology, the goal of the study was to evaluate stress-inducing properties of novel biodegradable ester-based scaffolds made of poly(glycerol sebacate) (PGS) and poly(lactic acid) (PLA) influencing on the growth and deoxyshikonin productivity of Rindera graeca hairy roots immobilized on the experimental constructs. Rindera graeca hairy roots were maintained under the dark condition for 28 days in three independent systems, i.e., (i) non-immobilized biomass (a reference system), (ii) biomass immobilized on PGS scaffolds, and (iii) biomass immobilized on PLA scaffolds. The stress-inducing properties of the applied polymerized esters selectively impacted R. graeca hairy roots. The PGS scaffolds caused the production of deoxyshikonin, which does not occur in other culture systems, and PLA promoted biomass proliferation by doubling its increase compared to the reference system.

Different methods of synthesizing poly(glycerol sebacate) (PGS): A review

Poly(glycerol sebacate) (PGS) is a biodegradable elastomer that has attracted increasing attention as a potential material for applications in biological tissue engineering. The conventional method of synthesis, first described in 2002, is based on the polycondensation of glycerol and sebacic acid, but it is a time-consuming and energy-intensive process. In recent years, new approaches for producing PGS, PGS blends, and PGS copolymers have been reported to not only reduce the time and energy required to obtain the final material but also to adjust the properties and processability of the PGS-based materials based on the desired applications. This review compiles more than 20 years of PGS synthesis reports, reported inconsistencies, and proposed alternatives to more rapidly produce PGS polymer structures or PGS derivatives with tailor-made properties. Synthesis conditions such as temperature, reaction time, reagent ratio, atmosphere, catalysts, microwave-assisted synthesis, and PGS modifications (urethane and acrylate groups, blends, and copolymers) were revisited to present and discuss the diverse alternatives to produce and adapt PGS.

Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications

The three-dimensional printing (3DP) also known as the additive manufacturing (AM), a novel and futuristic technology that facilitates the printing of multiscale, biomimetic, intricate cytoarchitecture, function-structure hierarchy, multi-cellular tissues in the complicated micro-environment, patient-specific scaffolds, and medical devices. There is an increasing demand for developing 3D-printed products that can be utilized for organ transplantations due to the organ shortage. Nowadays, the 3DP has gained considerable interest in the tissue engineering (TE) field. Polylactide (PLA) and polycaprolactone (PCL) are exemplary biomaterials with excellent physicochemical properties and biocompatibility, which have drawn notable attraction in tissue regeneration. Herein, the recent advancements in the PLA and PCL biodegradable polymer-based composites as well as their reinforcement with hydrogels and bio-ceramics scaffolds manufactured through 3DP are systematically summarized and the applications of bone, cardiac, neural, vascularized and skin tissue regeneration are thoroughly elucidated. The interaction between implanted biodegradable polymers, in-vivo and in-vitro testing models for possible evaluation of degradation and biological properties are also illustrated. The final section of this review incorporates the current challenges and future opportunities in the 3DP of PCL- and PLA-based composites that will prove helpful for biomedical engineers to fulfill the demands of the clinical field.

Injectable hydrogels for bone and cartilage tissue engineering: a review

Tissue engineering, using a combination of living cells, bioactive molecules, and three-dimensional porous scaffolds, is a promising alternative to traditional treatments such as the use of autografts and allografts for bone and cartilage tissue regeneration. Scaffolds, in this combination, can be applied either through surgery by implantation of cell-seeded pre-fabricated scaffolds, or through injection of a solidifying precursor and cell mixture, or as an injectable cell-seeded pre-fabricated scaffold. In situ forming and pre-fabricated injectable scaffolds can be injected directly into the defect site with complex shape and critical size in a minimally invasive manner. Proper and homogeneous distribution of cells, biological factors, and molecular signals in these injectable scaffolds is another advantage over pre-fabricated scaffolds. Due to the importance of injectable scaffolds in tissue engineering, here different types of injectable scaffolds, their design challenges, and applications in bone and cartilage tissue regeneration are reviewed.

Blood-Vessel-Inspired Hierarchical Trilayer Scaffolds: PCL/Gelatin-Driven Protein Adsorption and Cellular Interaction

Fabrication of scaffolds with hierarchical structures exhibiting the blood vessel topological and biochemical features of the native extracellular matrix that maintain long-term patency remains a major challenge. Within this context, scaffold assembly using biodegradable synthetic polymers (BSPs) via electrospinning had led to soft-tissue-resembling microstructures that allow cell infiltration. However, BSPs fail to exhibit the sufficient surface reactivity, limiting protein adsorption and/or cell adhesion and jeopardizing the overall graft performance. Here, we present a methodology for the fabrication of three-layered polycaprolactone (PCL)-based tubular structures with biochemical cues to improve protein adsorption and cell adhesion. For this purpose, PCL was backbone-oxidized (O-PCL) and cast over a photolithography-manufactured microgrooved mold to obtain a bioactive surface as demonstrated using a protein adsorption assay (BSA), Fourier transform infrared spectroscopy (FTIR) and calorimetric analyses. Then, two layers of PCL:gelatin (75:25 and 95:5 w/w), obtained using a novel single-desolvation method, were electrospun over the casted O-PCL to mimic a vascular wall with a physicochemical gradient to guide cell adhesion. Furthermore, tensile properties were shown to withstand the physiological mechanical stresses and strains. In vitro characterization, using L929 mouse fibroblasts, demonstrated that the multilayered scaffold is a suitable platform for cell infiltration and proliferation from the innermost to the outermost layer as is needed for vascular wall regeneration. Our work holds promise as a strategy for the low-cost manufacture of next-generation polymer-based hierarchical scaffolds with high bioactivity and resemblance of ECM’s microstructure to accurately guide cell attachment and proliferation.

Bioengineering of fibroblast-conditioned Polycaprolactone/Gelatin electrospun scaffold for skin tissue engineering

BACKGROUND

Synthetic tissue engineering scaffolds has poor biocompatiblity with very low angiogenic properties. Conditioning the scaffolds with functional groups, coating with biological components, especially extracellular matrix (ECM), is an excellent strategy for improving their biomechanical and biological properties.

METHODS

In the current study, a composite of polycaprolactone and gelatin (PCL/Gel) was electrospun in the ratio of 70/30 and surface modified with 1% gelatin-coating (G-PCL/Gel) or plasma treatment (P-PCL/Gel). The surface modification was determined by SEM and ATR-FTIR spectroscopy, respectively. The scaffolds were cultured with fibroblast 3T3, then decellularized during freeze-thawing process to fabricate a fibroblast ECM-conditioned PCL/Gel scaffold (FC-PCL/Gel). The swelling and degaradtion as well as in vitro and in vivo biocompatibility and angiogenic properties of the scaffolds were evaluated.

RESULTS

The structure of the surface-modified G-PCL/Gel and P-PCL/Gel were unique and not changed compared to the PCL/Gel scaffolds. ATR-FTIR analysis admitted the formation of oxygen-containing groups, hydroxyl and carboxyl, on the surface of the P-PCL/Gel scaffold. The SEM micrographs and DAPI staining confirmed the cell attachment and the ECM deposition on the platform and successful removal of the cells after decellularization. P-PCL/Gel showed better cell attachment, ECM secretion and deposition after decellularization compared with G-PCL/Gel. The FC-PCL/Gel was considered as an optimized scaffold for further assays in this study. The FC-PCL/Gel showed increased hydrophilic behavior and cytobiocompatibility compared with P-PCL/Gel. The ECM on the FC-PCL/Gel scaffold showed a gradual degradation during 30 days degradation time, as a small amount of ECM remained over the FC-PCL/Gel scaffold at day 30. The FC-PCL/Gel showed significant biocompatibility and improved angiogenic property compared with P-PCL/Gel when subcutaneously implanted in a mouse animal model for 7 and 28 days.

CONCLUSIONS

Our findings suggest FC-PCL/Gel as an excellent biomimetic construct with high angiogenic properties. This bioengineered construct can serve as a possible application in our future pre-clinical and clinical studies for skin regeneration.