Controllable 1D and 2D Cobalt Oxide and Cobalt Selenide Nanostructures as Highly Efficient Electrocatalysts for the Oxygen Evolution Reaction

Utilization of Cobalt and its Oxide/Hydroxide Mediated by Ionic Liquids/Deep Eutectic Solvents as Catalysts in Water Splitting

With the ever-growing global demand for sustainable energy solutions, hydrogen has garnered significant attention as a clean, efficient, and renewable energy source. In the field of hydrogen production, catalyst research stands out as one of the foremost areas of focus. In recent years, the preparation of electrocatalysts using ionic liquids (ILs) and deep eutectic solvents (DESs) has attracted widespread attention. ILs and DESs possess unique physicochemical properties and are recognized as green media as well as functional materials. Cobalt-based catalysts have proven to be efficient electrocatalysts for water splitting. Incorporating ILs or DESs into the preparation of cobalt-based catalysts offers a remarkable advantage by allowing precise control over their structural design and composition. This control directly influences the adsorption properties of the catalyst's surface and the stability of reaction intermediates, thereby enabling enhanced control over reaction pathways and product selectivity. Consequently, the catalytic activity and stability of cobalt-based catalysts can be effectively improved. In the process of preparing cobalt-based catalysts, ILs and DESs can serve as solvents and templates. Owing to the good solubility of ILs and DESs, they can efficiently dissolve raw materials and provide a special nucleation and growth environment, obtaining catalysts with novel-structures. The main focus of this review is to provide a detailed introduction to metal cobalt and its oxide/hydroxide derivatives in the field of water splitting, with a particular emphasis on the research progress achieved through the utilization of IL and DES. The aim is to assist readers in designing and synthesizing novel and high-performance electrochemical catalysts.

Powering the Future by Iron Sulfide Type Material (FexSy) Based Electrochemical Materials for Water Splitting and Energy Storage Applications: A Review

Water electrolysis is among the recent alternatives for generating clean fuels (hydrogen). It is an efficient way to produce pure hydrogen at a rapid pace with no unwanted by-products. Effective and cheap water-splitting electrocatalysts with enhanced activity, specificity, and stability are currently widely studied. In this regard, noble metal-free transition metal-based catalysts are of high interest. Iron sulfide (FeS) is one of the essential electrocatalysts for water splitting because of its unique structural and electrochemical features. This article discusses the significance of FeS and its nanocomposites as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), and overall water splitting. FeS and its nanocomposites have been studied also for energy storage in the form of electrode materials in supercapacitors and lithium- (LIBs) and sodium-ion batteries (SIBs). The structural and electrochemical characteristics of FeS and its nanocomposites, as well as the synthesis processes, are discussed in this work. This discussion correlates these features with the requirements for electrocatalysts in overall water splitting and its associated reactions. As a result, this study provides a road map for researchers seeking economically viable, environmentally friendly, and efficient electrochemical materials in the fields of green energy production and storage.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Organic-Inorganic Hybrid Crystal-Assisted Etching of Nickel Foam for the Collectively Exhaustive Electrochemical Performance of Oxygen Evolution Reaction

In this work, an organic-inorganic hybrid crystal, violet-crystal (VC), was used to etch the nickel foam (NF) to fabricate a self-standing electrode for the water oxidation reaction. The efficacy of VC-assisted etching manifests the promising electrochemical performance towards the oxygen evolution reaction (OER), requiring only ~356 and ~376 mV overpotentials to reach 50 and 100 mA cm-2 , respectively. The OER activity improvement is attributed to the collectively exhaustive effects arising from the incorporation of various elements in the NF, and the enhancement of active site density. Furthermore, the self-standing electrode is robust, exhibiting a stable OER activity after 4,000 cyclic voltammetry cycles, and ~50 h. The anodic transfer coefficients (αa ) show that the first electron transfer step is the rate-determining step on the surface of NF-VCs-1.0 (NF etched by 1 g of VCs) electrode, while the chemical step involving dissociation following the first electron transfer step is identified as the rate-limiting step in other electrodes. The lowest Tafel slope value observed in the NF-VCs-1.0 electrode indicates the high surface coverage of oxygen intermediates and more favorable OER reaction kinetics, as confirmed by high interfacial chemical capacitance and low charge transport/interfacial resistance. This work demonstrates the importance of VCs-assisted etching of NF to activate the OER, and the ability to predict reaction kinetics and rate-limiting step based on αa values, which will open new avenues to identify advanced electrocatalysts for the water oxidation reaction.

Synergy of cobalt vacancies and iron doping in cobalt selenide to promote oxygen electrode reactions in lithium-oxygen batteries

Electronic structural engineering plays a key role in the design of high-efficiency catalysts. Here, to achieve optimal electronic states, introduction of exotic Fe dopant and Co vacancy into CoSe₂ nanosheet (denoted as Fe-CoSe₂-V_Co) is presented. The obtained Fe-CoSe₂-V_Co demonstrates excellent catalytic activity as compared to CoSe₂. Experimental results and density functional theory (DFT) calculations confirm that Fe dopant and Co defects cause significant electron delocalization, which reduces the adsorption energy of LiO₂ intermediate on the catalyst surface, thereby obviously improving the electrocatalytic activity of Fe-CoSe₂-V_Co towards oxygen redox reactions. Moreover, the synergistic effect between Co vacancy and Fe dopant is able to optimize the microscopic electronic structure of Co ion, further reducing the energy barrier of oxygen electrode reactions on Fe-CoSe₂-V_Co. And the lithium-oxygen batteries (LOBs) based on Fe-CoSe₂-V_Co electrodes demonstrate a high Coulombic efficiency (CE) of about 72.66%, a large discharge capacity of about 13723 mA h g^-1, and an excellent cycling life of about 1338 h. In general, the electronic structure modulation strategy with the reasonable introduction of vacancy and dopant is expected to inspire the design of highly efficient catalysts for various electrochemical systems.

Transition metal selenides and diselenides: Hydrothermal fabrication, investigation of morphology, particle size and and their applications in photocatalyst

This review investigates hydrothermal synthesis of metal selenides and diselenides. Briefly, structures, applications and formation mechanisms are studied. The strategies for developing metal selenides, including NiSe, NiSe₂, Ni₃Se₂, CdSe, FeSe₂, MnSe₂, CoSe, CuSe, Cu_1.8Se, CuSe₂, Cu₃Se₂ and ZnSe are discussed. More of 50 hydrothermal methods used for the synthesis of metal selenides are discussed. As well as the investigation of the photocatalytic activities of these metal selenides are followed by different synthesis methods and strategies employed for the synthesis of them.

Investigation on nanostructured Cu-based electrocatalysts for improvising water splitting: a review

In this review, various forms of Cu based nanostructures have been explored in terms of improvise and enhancing their activity and durability with vast investigation for OER, HER and TWS applications.

Solid-solution hexagonal Ni0.5Co0.5Se nanoflakes toward boosted oxygen evolution reaction

The oxygen evolution reaction (OER) with sluggish kinetics is a bottleneck for the large-scale application of water electrolysis. Herein, solid-solution hexagonal Ni_0.5Co_0.5Se nanoflakes are designed and successfully synthesized via a facile hydrothermal method with a much lower overpotential of 216 mV at 10 mA cm^-2 and a Tafel slope of 37.08 mV dec^-1.

Rational phase transformation and morphology design to optimize oxygen evolution property of cobalt tungstate

In this work, a facile and feasible soft template method with the aid of buffer solution is successfully applied to synthesize high-order mesoporous cobalt tungstate for the first time. Attributing to the regulation of reaction solution's pH value and the existence of template, the phenomenon of phase transformation occurs, and high-order mesoporous structure is formed. Because of the variation of phase and morphology, only 448 mV can deliver a current density of 10 mA cm^-2 with a small Tafel slope (61 mV dec^-1) for mesoporous cobalt tungsten oxide hydroxide, while the cobalt tungstate nanoparticles cannot satisfy the basic demand of electrocatalysts. Herein, rational phase transformation and morphology design can significantly affect the property of oxygen evolution, which can provide vast opportunities to turn into candidates for the novel oxygen evolution catalyst.

Evaluating DNA Derived and Hydrothermally Aided Cobalt Selenide Catalysts for Electrocatalytic Water Oxidation

Electrocatalysts with engaging oxygen evolution reaction (OER) activity with lesser overpotentials are highly desired to have increased cell efficiency. In this work, cobalt selenide catalysts were prepared utilizing both wet-chemical route (CoSe and CoSe-DNA) and hydrothermal route (Co_0.85Se-hyd). In wet-chemical route, cobalt selenide is prepared with DNA (CoSe-DNA) and without DNA (CoSe). The morphological results in the wet-chemical route had given a clear picture that, with the assistance of DNA, cobalt selenide had formed as nanochains with particle size below 5 nm, while it agglomerated in the absence of DNA. The morphology was nano networks in the hydrothermally assisted synthesis. These catalysts were analyzed for OER activity in 1 M KOH. The overpotentials required at a current density of 10 mA cm^-2 were 352, 382, and 383 mV for Co_0.85Se-hyd, CoSe, and CoSe-DNA catalysts, respectively. The Tafel slope value was lowest for Co_0.85Se-hyd (65 mV/dec) compared to CoSe-DNA (71 mV/dec) and CoSe (80 mV/dec). The chronoamperometry test was studied for 24 h at a potential of 394 mV for Co_0.85Se-hyd and was found to be stable with a smaller decrease in activity. From the OER study, it is clear that Co_0.85Se was found to be superior to others. This kind of related study can be useful to design the catalyst with increased efficiency by varying the method of preparation.