Preferential Oxidation of CO in H 2 on Pure Co 3 O 4− x and Pt/Co 3 O 4− x

The cobalt oxidation state in preferential CO oxidation on CoOx/Pt(111) investigated by operando X-ray photoemission spectroscopy

The combination of a reducible transition metal oxide and a noble metal such as Pt often leads to active low-temperature catalysts for the preferential oxidation of CO in excess H₂ gas (PROX reaction). While CO oxidation has been investigated for such systems in model studies, the added influence of hydrogen gas, representative of PROX, remains less explored. Herein, we use ambient pressure scanning tunneling microscopy and ambient pressure X-ray photoelectron spectroscopy on a CoO_x/Pt(111) planar model catalyst to analyze the active phase and the adsorbed species at the CoO_x/Pt(111) interface under atmospheres of CO and O₂ with a varying partial pressure of H₂ gas. By following the evolution of the Co oxidation state as the catalyst is brought to a reaction temperature of above 150 °C, we determine that the active state is characterized by the transformation from planar CoO with Co in the 2+ state to a mixed Co²⁺/Co³⁺ phase at the temperature where CO₂ production is first observed. Furthermore, our spectroscopy observations of the surface species suggest a reaction pathway for CO oxidation, proceeding from CO exclusively adsorbed on Co²⁺ sites reacting with the lattice O from the oxide. Under steady state CO oxidation conditions (CO/O₂), the mixed oxide phase is replenished from oxygen incorporating into cobalt oxide nanoislands. In CO/O₂/H₂, however, the onset of the active Co²⁺/Co³⁺ phase formation is surprisingly sensitive to the H₂ pressure, which we explain by the formation of several possible hydroxylated intermediate phases that expose both Co²⁺ and Co³⁺. This variation, however, has no influence on the temperature where CO oxidation is observed. Our study points to the general importance of a dynamic reducibility window of cobalt oxide, which is influenced by hydroxylation, and the bonding strength of CO to the reduced oxide phase as important parameters for the activity of the system.

Present and new frontiers in materials research by ambient pressure x-ray photoelectron spectroscopy

In this topical review we catagorise all ambient pressure x-ray photoelectron spectroscopy publications that have appeared between the 1970s and the end of 2018 according to their scientific field. We find that catalysis, surface science and materials science are predominant, while, for example, electrocatalysis and thin film growth are emerging. All catalysis publications that we could identify are cited, and selected case stories with increasing complexity in terms of surface structure or chemical reaction are discussed. For thin film growth we discuss recent examples from chemical vapour deposition and atomic layer deposition. Finally, we also discuss current frontiers of ambient pressure x-ray photoelectron spectroscopy research, indicating some directions of future development of the field.

Effect of Hydrazine Pretreatment on the Activity, Stability and Active Sites of Cobalt Species for Preferential Oxidation (PROX) of CO in H2-Rich Stream

The as-prepared (Co3O4) and hydrazine-treated (Co3O4(H)) cobalt catalysts were prepared using the precipitation method and evaluated at a temperature range of 40–220 °C for preferential oxidation (PROX) of CO in excess hydrogen. An improved surface reducibility with smaller crystallite size was noted on hydrazine-treated cobalt species (i.e., Co3O4(H) catalyst), which indicates some surface transformation. This finding correlates with the surface roughness formation (as depicted by scanning electron microscope (SEM) and transmission electron microscope (TEM) data), which was further confirmed by an increase in the Brunauer–Emmett–Teller (BET) surface area. The mesoporous structure of the Co3O4(H) catalyst remained intact, as compared to that of the Co3O4 catalyst. Interestingly, the in situ treatment of the standalone Co3O4(H) catalyst decreased the maximum CO conversion temperature (T100%) from 160 °C (over Co3O4) to 100 °C, with good selectivity. The Co3O4(H) catalyst showed good stability, with approximately 85% CO conversion at 100 °C for 21 h, as compared to a faster deactivation of the Co3O4 catalyst. However, the Co3O4(H) catalyst was unstable in both CO2 and the moisture environment. Based on the evaluation of spent hydrazine-treated (CoO(H)) cobalt catalyst, the high PROX activity is associated with the formation of Co3+ species as confirmed by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), and temperature-programmed reduction (TPR) data.

A mini review of in situ near-ambient pressure XPS studies on non-noble, late transition metal catalysts

The rich surface chemistry of Fe, Co, Ni and Cu during heterogeneous catalytic reactions from the perspective of NAP-XPS studies.

Dual reactor for in situ/operando fluorescent mode XAS studies of sample containing low-concentration 3d or 5d metal elements

Transition metal elements are the most important elements of heterogeneous catalysts used for chemical and energy transformations. Many of these catalysts are active at a temperature higher than 400 °C. For a catalyst containing a 3d or 5d metal element with a low concentration, typically their released fluorescence upon the K-edge or L-edge adsorption of X-rays is collected for the analysis of chemical and coordination environments of these elements. However, it is challenging to perform in situ/operando X-ray absorption spectroscopy (XAS) studies of elements of low-energy absorption edges at a low concentration in a catalyst during catalysis at a temperature higher than about 450 °C. Here a unique reaction system consisting two reactors, called a dual reactor system, was designed for performing in situ or operando XAS studies of these elements of low-energy absorption edges in a catalyst at a low concentration during catalysis at a temperature higher than 450 °C in a fluorescent mode. This dual-reactor system contains a quartz reactor for preforming high-temperature catalysis up to 950 °C and a Kapton reactor remaining at a temperature up to 450 °C for collecting data in the same gas of catalysis. With this dual reactor, chemical and coordination environments of low-concentration metal elements with low-energy absorption edges such as the K-edge of 3d metals including Ti, V, Cr, Mn, Fe, Co, Ni, and Cu and L edge of 5d metals including W, Re, Os, Ir, Pt, and Au can be examined through first performing catalysis at a temperature higher than 450 °C in the quartz reactor and then immediately flipping the catalyst in the same gas flow to the Kapton reactor remained up to 450 °C to collect data. The capability of this dual reactor was demonstrated by tracking the Mn K-edge of the MnO_x/Na₂WO₄ catalyst during activation in the temperature range of 300-900 °C and catalysis at 850 °C.

Transition of surface phase of cobalt oxide during CO oxidation

Transition of surface phase of cobalt oxide nanoparticle catalyst during CO oxidation in 60–200 °C tracked through AP-XPS.

Operando chemistry of catalyst surfaces during catalysis

The chemistry of a catalyst surface during catalysis is crucial for a fundamental understanding of the mechanisms of a catalytic reaction performed on the catalyst in the gas or liquid phase.