Stereoselective and Chiroselective Surface Plasmon Resonance (SPR) Analysis of Amino Acids by Molecularly Imprinted Au-Nanoparticle Composites

Detection of chlorpyrifos based on molecular imprinting with a conducting polythiophene copolymer loaded on multi-walled carbon nanotubes

Molecular imprinting technique (MIT) with electrochemical sensing provides an attractive tool for the fabrication of sensors. Incorporation of conducting copolymer and surface imprinting strategies in the sensing device improves the conducting properties and poor template accessibility, slow binding kinetics at the same time. Here, this technique was employed with conducting polymers with multi-walled carbon nanotubes (MWCNT) to build an electrochemical sensor for detecting Chlorpyrifos (CPF) in vegetable sample solutions. In this work, we aimed at synthesizing a copolymer of 3-thiophene acetic acid and 3,4-ethylene dioxythiophene on the surface of MWCNT. We further constructed a polymer drop-casted glassy carbon electrode sensor for ultrasensitive detection CPF. Under optimal conditions, the sensor exhibited a very low limit of detection (LOD) of 4.0 × 10^-12 M for CPF. Due to the excellent repeatability and reusability of the materials, this study and findings have potential applications in the monitoring of pesticides from vegetable samples.

Metallic-Nanoparticle-Based Sensing: Utilization of Mixed-Ligand Monolayers

The last two decades have seen great advancements in fundamental understanding and applications of metallic nanoparticles stabilized by mixed-ligand monolayers. Identifying and controlling the organization of multiple ligands in the nanoparticle monolayer has been studied, and its effect on particle properties has been examined. Mixed-ligand protected particles have shown advantages over monoligand protected particles in fields such as catalysis, self-assembly, imaging, and drug delivery. In this Review, the use of mixed-ligand monolayer protected nanoparticles for sensing applications will be examined. This is the first time this subject is examined as a whole. Mixed-ligand nanoparticle-based sensors are revealed to be divided into four groups, each of which will be discussed. The first group consists of ligands that work cooperatively to improve the sensors' properties. In the second group, multiple ligands are utilized for sensing multiple analytes. The third group combines ligands used for analyte recognition and signal production. In the final group, a sensitive, but unstable, functional ligand is combined with a stabilizing ligand. The Review will conclude by discussing future challenges and potential research directions for this promising subject.

Advances in Molecularly Imprinting Technology for Bioanalytical Applications

In recent years, along with the rapid development of relevant biological fields, there has been a tremendous motivation to combine molecular imprinting technology (MIT) with biosensing. In this situation, bioprobes and biosensors based on molecularly imprinted polymers (MIPs) have emerged as a reliable candidate for a comprehensive range of applications, from biomolecule detection to drug tracking. Unlike their precursors such as classic immunosensors based on antibody binding and natural receptor elements, MIPs create complementary cavities with stronger binding affinity, while their intrinsic artificial polymers facilitate their use in harsh environments. The major objective of this work is to review recent MIP bioprobes and biosensors, especially those used for biomolecules and drugs. In this review, MIP bioprobes and biosensors are categorized by sensing method, including optical sensing, electrochemical sensing, gravimetric sensing and magnetic sensing, respectively. The working mechanism(s) of each sensing method are thoroughly discussed. Moreover, this work aims to present the cutting-edge structures and modifiers offering higher properties and performances, and clearly point out recent efforts dedicated to introduce multi-sensing and multi-functional MIP bioprobes and biosensors applicable to interdisciplinary fields.

Application of nanotechnology in biosensors for enhancing pathogen detection

Rapid detection and identification of pathogenic microorganisms is fundamental to minimizing the spread of infectious disease, and informing clinicians on patient treatment strategies. This need has led to the development of enhanced biosensors that utilize state of the art nanomaterials and nanotechnology, and represent the next generation of diagnostics. A primer on nanoscale biorecognition elements such as, nucleic acids, antibodies, and their synthetic analogs (molecular imprinted polymers), will be presented first. Next the application of various nanotechnologies for biosensor transduction will be discussed, along with the inherent nanoscale phenomenon that leads to their improved performance and capabilities in biosensor systems. A future outlook on characterization and quality assurance, nanotoxicity, and nanomaterial integration into lab-on-a-chip systems will provide the closing thoughts. This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices Diagnostic Tools > Biosensing.

Controlled Vectorial Electron Transfer and Photoelectrochemical Applications of Layered Relay/Photosensitizer-Imprinted Au Nanoparticle Architectures on Electrodes

Two configurations of molecularly imprinted bis-aniline-bridged Au nanoparticles (NPs) for the specific binding of the electron acceptor N,N'-dimethyl-4,4'-bipyridinium (MV(2+) ) and for the photosensitizer Zn(II)-protoporphyrin IX (Zn(II)-PP-IX) are assembled on electrodes, and the photoelectrochemical features of the two configurations are discussed. Configuration I includes the MV(2+) -imprinted Au NPs matrix as a base layer, on which the Zn(II)-PP-IX-imprinted Au NPs layer is deposited, while configuration II consists of a bilayer corresponding to the reversed imprinting order. Irradiation of the two electrodes in the presence of a benzoquinone/benzohydroquinone redox probe yields photocurrents of unique features: (i) Whereas configuration I yields an anodic photocurrent, the photocurrent generated by configuration II is cathodic. (ii) The photocurrents obtained upon irradiation of the imprinted electrodes are substantially higher as compared to the nonimprinted surfaces. The high photocurrents generated by the imprinted Au NPs-modified electrodes are attributed to the effective loading of the imprinted matrices with the MV(2+) and Zn(II)-PP-IX units and to the effective charge separation proceeding in the systems. The directional anodic/cathodic photocurrents are rationalized in terms of vectorial electron transfer processes dictated by the imprinting order and by the redox potentials of the photosensitizer/electron acceptor units associated with the imprinted sites in the two configurations.

Layered Metal Nanoparticle Structures on Electrodes for Sensing, Switchable Controlled Uptake/Release, and Photo-electrochemical Applications

Layered metal nanoparticle (NP) assemblies provide highly porous and conductive composites of unique electrical and optical (plasmonic) properties. Two methods to construct layered metal NP matrices are described, and these include the layer-by-layer deposition of NPs, or the electropolymerization of monolayer-functionalized NPs, specifically thioaniline-modified metal NPs. The layered NP composites are used as sensing matrices through the use of electrochemistry or surface plasmon resonance (SPR) as transduction signals. The crosslinking of the metal NP composites with molecular receptors, or the imprinting of molecular recognition sites into the electropolymerized NP matrices lead to selective and chiroselective sensing interfaces. Furthermore, the electrosynthesis of redox-active, imprinted, bis-aniline bridged Au NP composites yields electrochemically triggered "sponges" for the switchable uptake and release of electron-acceptor substrates, and results in conductive surfaces of electrochemically controlled wettability. Also, photosensitizer-relay-crosslinked Au NP composites, or electrochemically polymerized layered semiconductor quantum dot/metal NP matrices on electrodes, are demonstrated as functional nanostructures for photoelectrochemical applications.

Water-soluble plasmonic nanosensors with synthetic receptors for label-free detection of folic acid

We describe an original approach to graft molecularly imprinted polymers around gold nanorods by combining the diazonium salt chemistry and the iniferter method. This chemical strategy enables fine control of the imprinting process at the nanometer scale and provides water-soluble plasmonic nanosensors.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Molecularly imprinted aptamers of gold nanoparticles for the enzymatic inhibition and detection of thrombin

We prepared thrombin-binding aptamer-conjugated gold nanoparticles (TBA-Au NPs) through a molecularly imprinted (MP) approach, which provide highly efficient inhibition activity toward the polymerization of fibrinogen. Au NPs (diameter, 13 nm), 15-mer thrombin-binding aptamer (TBA(15)) with different thymidine linkers, and 29-mer thrombin-binding aptamer (TBA(29)) with different thymidine linkers (Tn) in the presence of thrombin (Thr) as a template were used to prepare MP-Thr-TBA(15)/TBA(29)-Tn-Au NPs. Thrombin molecules were then removed from Au NPs surfaces by treating with 100 mM Tris-NaOH (pH ca. 13.0) to form MP-TBA(15)/TBA(29)-Tn-Au NPs. The length of the thymidine linkers and TBA density on Au NPs surfaces have strong impact on the orientation, flexibility, and stability of MP-TBA(15)/TBA(29)-Tn-Au NPs, leading to their stronger binding strength with thrombin. MP-TBA(15)/TBA(29)-T(15)-Au NPs (ca. 42 TBA(15) and 42 TBA(29) molecules per Au NP; 15-mer thymidine on aptamer terminal) provided the highest binding affinity toward thrombin with a dissociation constant of 5.2 × 10(-11) M. As a result, they had 8 times higher anticoagulant (inhibitory) potency relative to TBA(15)/TBA(29)-T(15)-Au NPs (prepared in the absence of thrombin). We further conducted thrombin clotting time (TCT) measurements in plasma samples and found that MP-TBA(15)/TBA(29)-T(15)-Au NPs had greater anticoagulation activity relative to four commercial drugs (heparin, argatroban, hirudin, and warfarin). In addition, we demonstrated that thrombin induced the formation of aggregates from MP-TBA(15)-T(15)-Au NPs and MP-TBA(29)-T(15)-Au NPs, thereby allowing the colorimetric detection of thrombin at the nanomolar level in serum samples. Our result demonstrates that our simple molecularly imprinted approach can be applied for preparing various functional nanomaterials to control enzyme activity and targeting important proteins.

Surface plasmon resonance biosensors incorporating gold nanoparticles

SPR biosensing is increasingly popular for the detection of a multitude of biomolecules. It offers label-free detection and study of proteins, nucleic acids, and other biomolecules in real time. A recent trend involves incorporation of AuNPs, either within the sensing surface itself or as signal enhancing tagging molecules. The importance of AuNP and detecting agent spacing is described and techniques using macromolecular spacing aids are highlighted. Recent methods to enhance SPR detection capabilities using gold nanoparticles are reviewed, as well as device fabrication and the results of incorporation. SPR detection is a highly versatile method for the detection of biomolecules and, with the incorporation of AuNPs, shows promise in extending it to a number of new applications.

In-situ polymerized molecularly imprinted polymeric thin films used as sensing layers in surface plasmon resonance sensors: Mini-review focused on 2010–2011

This review provides a short overview of polymeric thin films incorporating molecular imprints within their 3D macromolecular structure as synthetic recognition elements and prepared by in situ polymerization for surface plasmon resonance application. This review starts with a brief reminder of the principle of surface plasmon resonance detection. The second section is focused on molecularly imprinted materials. Bulk and thin film polymer formats can be obtained by free radical polymerization, where the functional monomer interacts specifically with the template and the cross-linker controls the rigidity of the imprinted cavities. Grafting polymerization is presented as a method of choice for covalent attachment of ultra-thin molecularly imprinted films on a surface plasmon resonance metallic substrate. Examples of electropolymerized thin films are also provided. In the rest of this contribution, surface plasmon resonance applications of molecularly imprinted polymers reported mainly over the last two years are presented with respect to the preparation mode. Also, applications of gold nanoparticle/molecularly imprinted polymer composites for the design of surface plasmon resonance-based sensors with enhanced sensitivity due to the phenomenon of localized surface plasmon resonance induced by the presence of gold nanoparticles are summarized.

Electrochemically triggered Au nanoparticles "sponges" for the controlled uptake and release of a photoisomerizable dithienylethene guest substrate

1,2-Di(2-methyl-5-(N-methylpyridinium)-thien-3-yl)-cyclopentene undergoes a reversible photoisomerization between open and closed states. The closed isomer state exhibits electron acceptor properties, whereas its irradiation using visible light (λ > 530 nm) yields the open state that lacks electron acceptor features. The electropolymerization of thioaniline-functionalized Au nanoparticles (NPs) in the presence of the closed photoisomer state yields a molecularly imprinted Au NPs matrix, cross-linked by redox-active bis-aniline π-donor bridges. The closed isomer is stabilized in the imprinted sites of the bis-aniline-bridged Au NPs composite by donor-acceptor interactions. The electrochemical oxidation of the bis-aniline bridging units to the quinoid acceptor state leads to imprinted sites that lack affinity interactions for the binding of the closed state to the matrix, leading to the release of the closed photoisomer to the electrolyte solution. By the cyclic reduction and oxidation of the bridging units to the bis-aniline and quinoid states, the reversible electrochemically controlled uptake and release of the closed photoisomer is demonstrated. The quantitative uptake and release of the closed isomer to and from the imprinted Au NPs composites is followed by application of CdSe/ZnS quantum dots as auxiliary probes. Similarly, by the reversible photochemical isomerization of the closed substrate to the open substrate (λ > 530 nm) and the reversible photoizomerization of the open substrate to the closed state (λ = 302 nm), the cyclic photonic uptake and release of the closed substrate to and from the imprinted Au NPs matrix are demonstrated. Finally, we demonstrate that the electrochemically stimulated uptake and release of the closed substrate to and from the imprinted Au NPs composite controls the wettability of the resulting surface.

Molecularly imprinted Au nanoparticles composites on Au surfaces for the surface plasmon resonance detection of pentaerythritol tetranitrate, nitroglycerin, and ethylene glycol dinitrate

Molecularly imprinted Au nanoparticles (NPs) composites are generated on Au-coated glass surfaces. The imprinting process involves the electropolymerization of thioaniline-functionalized Au NPs (3.5 nm) on a thioaniline monolayer-modified Au surface in the presence of a carboxylic acid, acting as a template analogue for the respective explosive. The exclusion of the imprinting template from the Au NPs matrix yields the respective imprinted composites. The binding of the analyte explosives to the Au NPs matrixes is probed by surface plasmon resonance spectroscopy, SPR, where the electronic coupling between the localized plasmon of the Au NPs and the surface plasmon wave leads to the amplification of the SPR responses originating from the dielectric changes of the matrixes upon binding of the different explosive materials. The resulting imprinted matrixes reveal high affinities and selectivity toward the imprinted explosives. Using citric acid as an imprinting template, Au NPs matrixes for the specific analysis of pentaerythritol tetranitrate (PETN) or of nitroglycerin (NG) were prepared, leading to detection limits of 200 fM and 20 pM, respectively. Similarly, using maleic acid or fumaric acid as imprinting templates, high-affinity sensing composites for ethylene glycol dinitrate (EGDN) were synthesized, leading to a detection limit of 400 fM for both matrixes.