A digital twin for simulating the vertebroplasty procedure and its impact on mechanical stability of vertebra in cancer patients

Evolution of digital twins in precision health applications: a scoping review study

An increasing amount of research is incorporating the concept of Digital twin (DT) in biomedical and health care applications. This scoping review aims to summarize existing research and identify gaps in the development and use of DTs in the health care domain. The focus of this study lies on summarizing: the different types of DTs, the techniques employed in DT development, the DT applications in health care, and the data resources used for creating DTs. We identified fifty studies, which mainly focused on creating organ- (n=15) and patient-specific twins (n=30). The research predominantly centers on cardiology, endocrinology, orthopedics, and infectious diseases. Only a few studies used real-world datasets for developing their DTs. However, there remain unresolved questions and promising directions that require further exploration. This review provides valuable reference material and insights for researchers on DTs in health care and highlights gaps and unmet needs in this field.

Rheological Analysis and Evaluation of Measurement Techniques for Curing Poly(Methyl Methacrylate) Bone Cement in Vertebroplasty

Vertebroplasty is a minimally invasive surgical procedure used to treat vertebral fractures, which conventionally involves injecting poly(methyl methacrylate) (PMMA) bone cement into the fractured vertebra. A common risk associated with vertebroplasty is cement leaking out of the vertebra during the injection, which may occur due to a lack of understanding of the complex flow behavior. Therefore, experiments to quantify the cement's flow properties are necessary for understanding and proper handling of the bone cement. In this study, we aimed to characterize the behavior of PMMA bone cement in its curing stages to obtain parameters that govern the flow behavior during injection. We used rotational and oscillatory rheometry for our measurements, as well as a custom-made injector setup that replicated a typical vertebroplasty setting. Our results showed that the complex viscoelastic behavior of bone cement is significantly affected by deformations and temperature. We found that the results from rotational tests, often used for characterizing the bone cement, are susceptible to measurement artifacts caused by wall slip and "ridge"-like formations in the test sample. We also found the Cox-Merz rule to be conditionally valid, which affects the use of oscillatory tests to obtain the shear-thinning characteristics of bone cement. Our findings identify important differences in the measured flow behavior of PMMA bone cement when assessed by different rheological methods, an understanding that is crucial for its risk-free usage in downstream medical applications.

Digital twins for health: a scoping review

The use of digital twins (DTs) has proliferated across various fields and industries, with a recent surge in the healthcare sector. The concept of digital twin for health (DT4H) holds great promise to revolutionize the entire healthcare system, including management and delivery, disease treatment and prevention, and health well-being maintenance, ultimately improving human life. The rapid growth of big data and continuous advancement in data science (DS) and artificial intelligence (AI) have the potential to significantly expedite DT research and development by providing scientific expertise, essential data, and robust cybertechnology infrastructure. Although various DT initiatives have been underway in the industry, government, and military, DT4H is still in its early stages. This paper presents an overview of the current applications of DTs in healthcare, examines consortium research centers and their limitations, and surveys the current landscape of emerging research and development opportunities in healthcare. We envision the emergence of a collaborative global effort among stakeholders to enhance healthcare and improve the quality of life for millions of individuals worldwide through pioneering research and development in the realm of DT technology.

Generative adversarial networks for spine imaging: A critical review of current applications

PURPOSE

In recent years, the field of medical imaging has witnessed remarkable advancements, with innovative technologies which revolutionized the visualization and analysis of the human spine. Among the groundbreaking developments in medical imaging, Generative Adversarial Networks (GANs) have emerged as a transformative tool, offering unprecedented possibilities in enhancing spinal imaging techniques and diagnostic outcomes. This review paper aims to provide a comprehensive overview of the use of GANs in spinal imaging, and to emphasize their potential to improve the diagnosis and treatment of spine-related disorders. A specific review focusing on Generative Adversarial Networks (GANs) in the context of medical spine imaging is needed to provide a comprehensive and specialized analysis of the unique challenges, applications, and advancements within this specific domain, which might not be fully addressed in broader reviews covering GANs in general medical imaging. Such a review can offer insights into the tailored solutions and innovations that GANs bring to the field of spinal medical imaging.

METHODS

An extensive literature search from 2017 until July 2023, was conducted using the most important search engines and identified studies that used GANs in spinal imaging.

RESULTS

The implementations include generating fat suppressed T2-weighted (fsT2W) images from T1 and T2-weighted sequences, to reduce scan time. The generated images had a significantly better image quality than true fsT2W images and could improve diagnostic accuracy for certain pathologies. GANs were also utilized in generating virtual thin-slice images of intervertebral spaces, creating digital twins of human vertebrae, and predicting fracture response. Lastly, they could be applied to convert CT to MRI images, with the potential to generate near-MR images from CT without MRI.

CONCLUSIONS

GANs have promising applications in personalized medicine, image augmentation, and improved diagnostic accuracy. However, limitations such as small databases and misalignment in CT-MRI pairs, must be considered.

Precision Anesthesia in 2050

Over the last few decades, the field of anesthesia has advanced far beyond its humble beginnings. Today's anesthetics are better and safer than ever, thanks to innovations in drugs, monitors, equipment, and patient safety.1-4 At the same time, we remain limited by our herd approach to medicine. Each of our patients is unique, but health care today is based on a one-size-fits-all approach, while our patients grow older and more medically complex every year. By 2050, we believe that precision medicine will play a central role across all medical specialties, including anesthesia. In addition, we expect that health care and consumer technology will continually evolve to improve and simplify the interactions between patients, providers, and the health care system. As demonstrated by 2 hypothetical patient experiences, these advancements will enable more efficient and safe care, earlier and more accurate diagnoses, and truly personalized treatment plans.

Overcoming the Challenges in the Development and Implementation of Artificial Intelligence in Radiology: A Comprehensive Review of Solutions Beyond Supervised Learning

Artificial intelligence (AI) in radiology is a rapidly developing field with several prospective clinical studies demonstrating its benefits in clinical practice. In 2022, the Korean Society of Radiology held a forum to discuss the challenges and drawbacks in AI development and implementation. Various barriers hinder the successful application and widespread adoption of AI in radiology, such as limited annotated data, data privacy and security, data heterogeneity, imbalanced data, model interpretability, overfitting, and integration with clinical workflows. In this review, some of the various possible solutions to these challenges are presented and discussed; these include training with longitudinal and multimodal datasets, dense training with multitask learning and multimodal learning, self-supervised contrastive learning, various image modifications and syntheses using generative models, explainable AI, causal learning, federated learning with large data models, and digital twins.

The Digital Twin: A Potential Solution for the Personalized Diagnosis and Treatment of Musculoskeletal System Diseases

Due to the high prevalence and rates of disability associated with musculoskeletal system diseases, more thorough research into diagnosis, pathogenesis, and treatments is required. One of the key contributors to the emergence of diseases of the musculoskeletal system is thought to be changes in the biomechanics of the human musculoskeletal system. However, there are some defects concerning personal analysis or dynamic responses in current biomechanical research methodologies. Digital twin (DT) was initially an engineering concept that reflected the mirror image of a physical entity. With the application of medical image analysis and artificial intelligence (AI), it entered our lives and showed its potential to be further applied in the medical field. Consequently, we believe that DT can take a step towards personalized healthcare by guiding the design of industrial personalized healthcare systems. In this perspective article, we discuss the limitations of traditional biomechanical methods and the initial exploration of DT in musculoskeletal system diseases. We provide a new opinion that DT could be an effective solution for musculoskeletal system diseases in the future, which will help us analyze the real-time biomechanical properties of the musculoskeletal system and achieve personalized medicine.

Wear patterns in knee OA correlate with native limb geometry

Background: To date, the amount of cartilage loss is graded by means of discrete scoring systems on artificially divided regions of interest (ROI). However, optimal statistical comparison between and within populations requires anatomically standardized cartilage thickness assessment. Providing anatomical standardization relying on non-rigid registration, we aim to compare morphotypes of a healthy control cohort and virtual reconstructed twins of end-stage knee OA subjects to assess the shape-related knee OA risk and to evaluate possible correlations between phenotype and location of cartilage loss.

Methods: Out of an anonymized dataset provided by the Medacta company (Medacta International SA, Castel S. Pietro, CH), 798 end-stage knee OA cases were extracted. Cartilage wear patterns were observed by computing joint space width. The three-dimensional joint space width data was translated into a two-dimensional pixel image, which served as the input for a principal polynomial autoencoder developed for non-linear encoding of wear patterns. Virtual healthy twin reconstruction enabled the investigation of the morphology-related risk for OA requiring joint arthroplasty.

Results: The polynomial autoencoder revealed 4 dominant, orthogonal components, accounting for 94% of variance in the latent feature space. This could be interpreted as medial (54.8%), bicompartmental (25.2%) and lateral (9.1%) wear. Medial wear was subdivided into anteromedial (11.3%) and posteromedial (10.4%) wear. Pre-diseased limb geometry had a positive predictive value of 0.80 in the prediction of OA incidence (r 0.58, p < 0.001).

Conclusion: An innovative methodological workflow is presented to correlate cartilage wear patterns with knee joint phenotype and to assess the distinct knee OA risk based on pre-diseased lower limb morphology. Confirming previous research, both alignment and joint geometry are of importance in knee OA disease onset and progression.