High-Surface Area Mesoporous Sc2O3 with Abundant Oxygen Vacancies as New and Advanced Electrocatalyst for Electrochemical Biomass Valorization

Scandium oxide (Sc2O3) is considered as omnipotent "Industrial Ajinomoto" and holds promise in catalytic applications. However, rarely little attention is paid to its electrochemistry. Here, the first nanocasting design of high-surface area Sc2O3 with abundant oxygen vacancies (mesoporous VO-Sc2O3) for efficient electrochemical biomass valorization is reported. In the case of the electro-oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), quantitative HMF conversion, high yield, and high faradic efficiency of FDCA via the hydroxymethylfurancarboxylic acid pathway are achieved by this advanced electrocatalyst. The beneficial effect of the VO on the electrocatalytic performance of the mesoporous VO-Sc2O3 is revealed by the enhanced adsorption of reactants and the reduced energy barrier in the electrochemical process. The concerted design, in situ and ex situ experimental studies and theoretical calculations shown in this work should shed light on the rational elaboration of advanced electrocatalysts, and contribute to the establishment of a circular carbon economy since the bio-plastic monomer and green hydrogen are efficiently synthesized.

Two Dimensional Ir-Based Catalysts for Acidic OER

Electrochemical water splitting in acidic media is one of the most promising hydrogen production technologies, yet its practical applications in proton exchange membrane (PEM) water electrolyzers are limited by the anodic oxygen evolution reaction (OER). Iridium (Ir)-based materials are considered as the state-of-the-art catalysts for acidic OER due to their good stability under harsh acidic conditions. However, their activities still have much room for improvement. Two-dimensional (2D) materials are full of the advantages of high-surface area, unique electrical properties, facile surface modification, and good stability, making the development of 2D Ir-based catalysts more attractive for achieving high catalytic performance. In this review, first, the unique advantages of 2D catalysts for electrocatalysis are reviewed. Thereafter, the classification, synthesis methods, and recent OER achievements of 2D Ir-based materials, including pure metals, alloys, oxides, and perovskites are introduced. Finally, the prospects and challenges of developing 2D Ir-based catalysts for future acidic OER are discussed.

Tailoring the Co4+/Co3+ active sites in a single perovskite as a bifunctional catalyst for the oxygen electrode reactions

Developing a non-precious metal electrocatalyst for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is desirable for low-cost energy conversion devices. Herein, we designed and developed a new class of layered cation ordered single perovskite oxides (Pr0.9Ca0.1Co0.8Fe0.2O3-δ) with an optimum ratio of the Co4+/Co3+ oxidation state and oxygen vacancy for oxygen electrode reactions. Catalytic activities are investigated as a function of electronic structure and surface composition. A moderate amount of Ca and Fe dopants keeps the B-site Co cations at a higher oxidation state (Co4+) and generates a vast amount of an oxygen defect rich structure. The improved performance in the ORR and OER is explained by the increase in the sites of Co4+ cations, a state responsible for enhanced catalytic activity. A hypothesis for how doped Ca fraction affects the adsorbed oxygen species and contributes to catalytic activity is discussed. This work sheds light on the influence of crystal structure on the catalytic property and reports that ORR and OER activities are affected not only by oxygen vacancy concentration but also by the oxidation state of the transition metal in the perovskite oxide.

Beyond electrolysis: old challenges and new concepts of electricity-driven chemical reactors

With renewable electricity becoming the most widely available, versatile energy form on Earth, the electricity-driven chemical reactors will play crucial role in the transition to green, environmentally-neutral manufacturing of fuels and chemicals.

Recent Advances in Oxygen Electrocatalysts Based on Perovskite Oxides

Electrochemical oxygen reduction and oxygen evolution are two key processes that limit the efficiency of important energy conversion devices such as metal–air battery and electrolysis. Perovskite oxides are receiving discernable attention as potential bifunctional oxygen electrocatalysts to replace precious metals because of their low cost, good activity, and versatility. In this review, we provide a brief summary on the fundamentals of perovskite oxygen electrocatalysts and a detailed discussion on emerging high-performance oxygen electrocatalysts based on perovskite, which include perovskite with a controlled composition, perovskite with high surface area, and perovskite composites. Challenges and outlooks in the further development of perovskite oxygen electrocatalysts are also presented.

Chemical Design of Palladium-Based Nanoarchitectures for Catalytic Applications

Palladium (Pd) plays an important role in numerous catalytic reactions, such as methanol and ethanol oxidation, oxygen reduction, hydrogenation, coupling reactions, and carbon monoxide oxidation. Creating Pd-based nanoarchitectures with increased active surface sites, higher density of low-coordinated atoms, and maximized surface coverage for the reactants is important. To address the limitations of pure Pd, various Pd-based nanoarchitectures, including alloys, intermetallics, and supported Pd nanomaterials, have been fabricated by combining Pd with other elements with similar or higher catalytic activity for many catalytic reactions. Herein, recent advances in the preparation of Pd-based nanoarchitectures through solution-phase chemical reduction and electrochemical deposition methods are summarized. Finally, the trend and future outlook in the development of Pd nanocatalysts toward practical catalytic applications are discussed.

Engineering Two-Dimensional Mass-Transport Channels of the MoS2 Nanocatalyst toward Improved Hydrogen Evolution Performance

In addition to the intrinsic catalytic activity, the mass transport should be taken into adequate account in order to realize the superior performance of electrocatalysts. Here, we engineer the interstitial space between MoS₂ nanosheets via the introduction of "spacers" to construct two-dimensional (2D) channels for favorable mass transport. The nano-sized spacers effectively separate MoS₂ nanosheets, generating open and connective channels to fulfill timely reactant supply and rapid gas release. Besides, the spacer served as the physical support can prevent the collapse of 2D channels. Because of the engineering of nanostructured channels, a reduction in overpotential by approximately 100 and 360 mV at -10 and -100 mA cm^-2, respectively, a decrease in the Tafel slope from 66.7 to 39.4 mV dec^-1, and a more stable operation can be achieved. After being integrated by carbon paper, a further improved performance of 198 mV at -200 mA cm^-2 and 36 mV dec^-1 can be obtained. This work emphasizes the importance of mass-transport channels and paves a way to enhance the hydrogen evolution reaction performance.

Oxygen Evolution Catalysts Based on Ir-Ti Mixed Oxides with Templated Mesopore Structure: Impact of Ir on Activity and Conductivity

The efficient generation of hydrogen via water electrolysis requires highly active oxygen evolution catalysts. Among the active metals, iridium oxide provides the best compromise in terms of activity and stability. The limited availability and usage in other applications demands an efficient utilization of this precious metal. Forming mixed oxides with titania promises improved Ir utilization, but often at the cost of a low catalyst surface area. Moreover, the role of Ir in establishing a sufficiently conductive mixed oxide has not been elucidated so far. We report a new approach for the synthesis of Ir/TiO_x mixed-oxide catalysts with defined template-controlled mesoporous structure, low crystallinity, and superior oxygen evolution reaction (OER) activity. The highly accessible pore system provides excellent Ir dispersion and avoids transport limitations. A controlled variation of the oxides Ir content reveals the importance of the catalysts electrical conductivity: at least 0.1 S m^-1 are required to avoid limitations owing to slow electron transport. For sufficiently conductive oxides a clear linear correlation between Ir surface sites and OER currents can be established, where all accessible Ir sites equally contribute to the reaction. The optimized catalysts outperform Ir/TiO_x materials reported in literature by about a factor of at least four.

Ce1−xCoxOy nanocatalysts: synthesis, characterization and environmental application

In the present study, Ce_1−xCo_xO_y nanocatalysts were synthesized by a simple co-precipitation method. The synthesized catalysts were further characterized using various techniques (XRD, FTIR, N₂ adsorption/desorption, SEM, TEM, and EDX) in order to study their structural, micro-structural and textural properties.

Iridium oxide-polymer nanocomposite electrode materials for water oxidation

Nanocomposite anode materials for water oxidation have been readily synthesized by electrodeposition of iridium oxide nanoparticles into poly(pyrrole-alkylammonium) films, previously deposited onto carbon electrodes by oxidative electropolymerization of a pyrrole-alkylammonium monomer. The nanocomposite films were characterized by electrochemistry, transmission electron microscopy, and atomic force microscopy. They showed an efficient electrocatalytic activity toward the oxygen evolution reaction. Data from Tafel plots have demonstrated that the catalytic activity of the iridium oxide nanoparticles is maintained following their inclusion in the polymer matrix. Bulk electrolysis of water at carbon foam modified electrodes have shown that the iridium oxide-polymer composite presents a higher catalytic activity and a better operational stability than regular oxide films.

Electroassisted codeposition of sol-gel derived silica nanocomposite directs the fabrication of coral-like nanostructured porous gold

Herein, we report on a one-step coelectrodeposition method to form gold-silica nanocomposite materials from which high surface area nanostructured gold electrodes can be produced. The as-prepared Au-SiO2 films possess an interconnected three-dimensional porous framework with different silica-gold ratios depending on the deposition solutions and parameters. Chemical etching of the nanocomposite films using hydrofluoric acid resulted in the formation of nanostructured porous gold films with coral-like structures and pores in the nanometer range. The cross-linkage of the gold coral branches resulted in the generation of a porous framework. X-ray photoelectron spectroscopy confirms the complete removal of silica. Well-controlled surface area enhancement, film thickness, and morphology were achieved by manipulating the deposition parameters, such as potential, time, and gold ion and sol-gel monomer concentrations in the deposition solution. An enhancement in the surface area of the electrode up to 57 times relative to the geometric area has been achieved. The thickness of the as-prepared Au-SiO2 nanocomposite films is relatively high and varied from 8 to 15 μm by varying the applied deposition potential while the thickness of the coral-like nanostructured porous gold films ranged from 0.22 to 2.25 μm. A critical sol-gel monomer concentration (CSGC) was determined at which the deposited silica around the gold coral was able to stabilize the coral-like gold nanostructures, while below the CSGC, the coral-like gold nanostructures were unstable and the surface area of the nanostructured porous gold electrodes decreased.

On the faradaic selectivity and the role of surface inhomogeneity during the chlorine evolution reaction on ternary Ti–Ru–Ir mixed metal oxide electrocatalysts

Faradaic selectivity of the chlorine and oxygen evolution (left) is linked to the spatial inhomogeneity of the surface reactivity of Ti–Ru–Ir mixed metal oxide catalysts.

Nanoporous Gold Electrodes and Their Applications in Analytical Chemistry

Nanoporous gold prepared by dealloying Au:Ag alloys has recently become an attractive material in the field of analytical chemistry. This conductive material has an open, 3D porous framework consisting of nanosized pores and ligaments with surface areas that are 10s to 100s of times larger than planar gold of an equivalent geometric area. The high surface area coupled with an open pore network makes nanoporous gold an ideal support for the development of chemical sensors. Important attributes include conductivity, high surface area, ease of preparation and modification, tunable pore size, and a bicontinuous open pore network. In this paper, the fabrication, characterization, and applications of nanoporous gold in chemical sensing are reviewed specifically as they relate to the development of immunosensors, enzyme-based biosensors, DNA sensors, Raman sensors, and small molecule sensors.