Diffusion of Oligonucleotides from within Iron-Cross-Linked, Polyelectrolyte-Modified Alginate Beads: A Model System for Drug Release

Towards Ready-to-Use Iron-Crosslinked Alginate Beads as Mesenchymal Stem Cell Carriers

Micro-carriers, thanks to high surface/volume ratio, are widely studied as mesenchymal stem cell (MSCs) in vitro substrate for proliferation at clinical rate. In particular, Ca-alginate-based biomaterials (sodium alginate crosslinked with CaCl₂) are commonly investigated. However, Ca-alginate shows low bioactivity and requires functionalization, increasing labor work and costs. In contrast, films of sodium alginate crosslinked with iron chloride (Fe-alginate) have shown good bioactivity with fibroblasts, but MSCs studies are lacking. We propose a first proof-of-concept study of Fe-alginate beads supporting MSCs proliferation without functionalization. Macro- and micro-carriers were prepared (extrusion and electrospray) and we report for the first time Fe-alginate electrospraying optimization. FTIR spectra, stability with various mannuronic acids/guluronic acids (M/G) ratios and size distribution were analyzed before performing cell culture. After confirming literature results on films with human MSCs, we showed that Macro-Fe-alginate beads offered a better environment for MSCs adhesion than Ca-alginate. We concluded that Fe-alginate beads showed great potential as ready-to-use carriers.

Stimulation-Inhibition of Protein Release from Alginate Hydrogels Using Electrochemically Generated Local pH Changes

The electrochemically controlled release of proteins was studied in a Ca²⁺-cross-linked alginate hydrogel deposited on an electrode surface. The electrochemical oxidation of ascorbate or reduction of O₂ was achieved upon applying electrical potentials +0.6 or -0.8 V (vs Ag/AgCl/KCl 3 M), respectively, resulting in decreasing or increasing pH locally near an electrode surface. The obtained local acidic solution resulted in the protonation of carboxylic groups in the alginate hydrogel and, as a result, the formation of a hydrophobic shrunken hydrogel film. Conversely, the produced alkaline local environment resulted in a hydrophilic swollen hydrogel film. The release of the proteins was effectively inhibited from the shrunk hydrogel and activated from the swollen hydrogel film. Overall, the electrochemically produced local pH changes allowed control over the biomolecule release process. While the release inhibition by applying +0.6 V was always effective and could be maintained as long as the positive potential was applied, the release activation was different depending on the protein molecular size, being more effective for smaller species, and molecule charge, being more effective for negatively charged species. The repetitive change from the inhibited to stimulated state of the biomolecule release process was obtained upon cyclic application of oxidative and reductive potentials (+0.6 V ↔ -0.8 V). The alginate hydrogel film shrinking-swelling as well as the protein release process were studied and visualized using a confocal fluorescent microscope. In order to be observed, an external surface of the alginate film and the loaded protein molecules were labeled with different fluorescent dyes, which then produced colored fluorescent images under a confocal microscope.

Alginate-Based Smart Materials and Their Application: Recent Advances and Perspectives

Nature produces materials using available molecular building blocks following a bottom-up approach. These materials are formed with great precision and flexibility in a controlled manner. This approach offers the inspiration for manufacturing new artificial materials and devices. Synthetic artificial materials can find many important applications ranging from personalized therapeutics to solutions for environmental problems. Among these materials, responsive synthetic materials are capable of changing their structure and/or properties in response to external stimuli, and hence are termed "smart" materials. Herein, this review focuses on alginate-based smart materials and their stimuli-responsive preparation, fragmentation, and applications in diverse fields from drug delivery and tissue engineering to water purification and environmental remediation. In the first part of this report, we review stimuli-induced preparation of alginate-based materials. Stimuli-triggered decomposition of alginate materials in a controlled fashion is documented in the second part, followed by the application of smart alginate materials in diverse fields. Because of their biocompatibility, easy accessibility, and simple techniques of material formation, alginates can provide solutions for several present and future problems of humankind. However, new research is needed for novel alginate-based materials with new functionalities and well-defined properties for targeted applications.

Biomolecule Release from Alginate Composite Hydrogels Triggered by Logically Processed Signals

Alginate composite hydrogels that exhibit highly sensitive stimuli-responsive behavior were used for signal-stimulated release of pre-loaded insulin. The alginate pores, particularly located at the periphery, were blocked by interpenetration of polyvinyl alcohol (PVA) cross-linked with 1,3-benzenediboronic acid (IPN), thus, significantly reducing uncontrolled leakage of the entrapped biomolecules. The beads were loaded with insulin and various enzymes mimicking different Boolean logic gates (AND, OR, NOR, IMP, INHIB). The enzymes were activated with biologically relevant input signals applied in four logic combinations: 0,0; 1,0; 0,1; 1,1, having the production of H₂ O₂ as the result of the biocatalytic reactions. The "successful" combination of the input signals leading to the H₂ O₂ production was different for different logic gates, following the corresponding truth tables of the logic gates. When H₂ O₂ was produced, boronate ester bonds were oxidized and the IPN was irreversibly degraded, thus re-opening the original pores of the hydrogel. This process allowed release of insulin from the alginate beads. The smart soft material that we have developed tackled well-known limitations of these systems and it may prove valuable in future medical diagnostics or treatments.

Construction and research on size and phase 'fixed-point remodelling' intelligent drug delivery system

It is important to enhance penetration depth of nanomedicine and realise rapid drug release simultaneously at targeted tumour for improving anti-tumour efficiency of chemotherapeutic drugs. This project employed sodium alginate (Alg) as matrix material, to establish tumour-responsive nanogels with particle size conversion and drug controlled release functions. Specifically, tumour-targeting peptide CRGDK was conjugated with Alg first (CRGDK-Alg). Then, doxorubicin (DOX) was efficiently encapsulated in CRGDK-FeAlg nanogel during the cross-linking process (CRGDK-FeAlg/DOX). This system was closed during circulation. Once reaching tumour, the particle size of nanogels was reduced to ∼25 nm, which facilitated deep penetration of DOX in tumour tissues. After entering tumour cells, the size of nanogels was further reduced to ∼10 nm and DOX was released simultaneously. Meanwhile, FeAlg efficiently catalysed H₂O₂ to produce •OH by Fenton reaction, achieving local chemodynamic therapy without O₂ mediation. Results showed CRGDK-FeAlg/DOX significantly inhibited tumour proliferation in vivo with V/V0 of 1.13 after treatment, significantly lower than that of control group with V/V0 of 4.79.

Controlling the Release of Amphiphilic Liposomes from Alginate Hydrogel Particles for Antifouling Paint

As an alternative to the toxic antifouling paint that minimizes the adhesion force between organic molecules on large surfaces, a paint containing hydrogel particles encapsulating amphiphilic liposomes has been suggested. However, the release rate of liposomes, which is important for maximizing the antifouling performance, has not been adequately explored. We investigated the control of the release rate of liposomes encapsulated in alginate. Monodispersed alginate particles were generated using 3D-printed microfluidic devices, and their sizes were varied through the channel size, flow rate, and alginate concentration in the microfluidic devices ([Formula: see text]). The release rate of liposomes from the alginate particles was experimentally monitored under various conditions: alginate concentration, surrounding solution, and ambient fluid flow. The effects of chemical and mechanical stimuli on the effective diffusion coefficient (D_eff) of amphiphilic liposomes were analyzed, and accordingly, the best production conditions for antifouling alginate particles are suggested. This study provides essential physical insights and is useful for optimizing the performance of eco-friendly antifouling paint that includes alginate particles.

Encapsulation of live marine bacteria for use in aquaculture facilities and process evaluation using response surface methodology

New strategies are being proposed in marine aquaculture to use marine bacteria as alternative to antibiotics, as nutritional additive or as immune-stimulant. These approaches are particularly promising for larval and juvenile cultures. In many cases, the bacteria are released in the seawater, where they have to be at appropriate concentrations. In addition, only low-cost technologies are sustainable for this industry, without any complex requirements for use or storage. In this work, we explore the possibilities of preservation of a potential marine probiotic bacterium (Phaeobacter PP-154) as a product suitable for use in marine aquaculture by addition to the seawater. A method which guaranteed the preservation of the viable marine bacteria in a saline medium and their rapid release in the seawater was searched for. In a previous step, classical procedures (freeze-drying and freezing) had been explored, but undesirable results of the interaction of the products obtained with natural seawater led to investigate alternatives. We report the results of the immobilization of the marine bacteria in calcium alginate beads. The final product complies the salinity which allows the requirements of the bacteria without interference with alginate in the formation of beads, and a balanced hardness to retain the bacteria and to be easily released in the marine aquaculture environment. The process was evaluated using the central composite rotatable design (CCRD), a standard response surface methodology (RSM).

Design of injectable hydrogels of gelatin and alginate with ferric ions for cell transplantation

The objective of this study is to design bioabsorbable injectable hydrogels based on the physico-chemical interaction between biocompatible polymers and ferric ions, and evaluate the survival, proliferation, and osteogenic differentiation of cells encapsulated in the hydrogels. The injectable hydrogels were prepared by simply mixing mixed alginate/gelatin solution at various ratios and FeCl₃ solution. The hydrogels prepared disappeared within a few days in the phosphate buffered-saline solution (PBS) with containing collagenase although the disappearance rate increased with an increase of the gelatin ratio in the hydrogel. For the hydrogel of alginate/gelatin low ratio, the survival and proliferation of cells in the hydrogel-encapsulated condition were significantly high compared with those of hydrogel at the higher ratios. The cells collected 3 days after cultured in the hydrogel also proliferated to a significantly higher extent than those collected from other hydrogels. The proliferation ability of cells was similar that of cells cultured on the standard tissue culture polystyrene (TCPS) dish. When evaluated to compare with cells cultured on the TCPS dish, the expression of runt-related transcription factor-2 (RUNX2) gene, the alkaline phosphatase (ALP) activity, and the calcium precipitation were significantly high. The cells were encapsulated by the mixed alginate/gelatin and FeCl₃ hydrogel and injected in the back subcutis of mice, the percentage of cells retained in the injected site was higher than that of cells injected in the PBS suspension. It is concluded that the injectable hydrogel prepared by simple mixing mixed alginate/gelatin solution and FeCl₃ solution is a promising material for the cell transplantation. STATEMENT OF SIGNIFICANCE: Injectable hydrogels prepared by simple mixing mixed alginate/gelatin solution at various ratios and FeCl₃ solution. For the hydrogel of alginate/gelatin low ratio, the survival, the proliferation, and the differentiate properties of cells in the hydrogel-encapsulated condition were similar those of cells cultured on the TCPS dish. When the cells encapsulated hydrogels were injected in the back subcutis of mice, the percentage of cells retained in the injected site was higher than that of cells injected in the PBS suspension. It is concluded that the present injectable hydrogel is a promising material for the cell transplantation.

Biofabricating Functional Soft Matter Using Protein Engineering to Enable Enzymatic Assembly

Biology often provides the inspiration for functional soft matter, but biology can do more: it can provide the raw materials and mechanisms for hierarchical assembly. Biology uses polymers to perform various functions, and biologically derived polymers can serve as sustainable, self-assembling, and high-performance materials platforms for life-science applications. Biology employs enzymes for site-specific reactions that are used to both disassemble and assemble biopolymers both to and from component parts. By exploiting protein engineering methodologies, proteins can be modified to make them more susceptible to biology's native enzymatic activities. They can be engineered with fusion tags that provide (short sequences of amino acids at the C- and/or N- termini) that provide the accessible residues for the assembling enzymes to recognize and react with. This "biobased" fabrication not only allows biology's nanoscale components (i.e., proteins) to be engineered, but also provides the means to organize these components into the hierarchical structures that are prevalent in life.