Direct Catalytic Transformation of Biomass Derivatives into Biofuel Component γ-Valerolactone with Magnetic Nickel-Zirconium Nanoparticles

Valeric Biofuels from Biomass-Derived γ-Valerolactone: A Critical Overview of Production Processes

This review analyzes critically the production of valeric biofuels from γ-valerolactone, a relevant biomass-derived platform molecule. Initially, the main properties of valeric esters as fuels for spark- and compression-ignition engines are summarized. Then, catalytic routes to valeric esters from γ-valerolactone are meticulously analyzed, describing the acid- and metal-catalyzed reactions taking part in the tandem catalysis. Only works focused on the production of the valeric biofuels were considered, excluding the cases where these esters were observed in minor amounts or as byproducts. The role of the appropriate selection of the support, catalytic species, catalyst preparation and experimental conditions on the valeric ester productivity are thoroughly commented. Finally, some concluding remarks and perspectives are given, mentioning the areas where additional efforts must be done in order to turn the dream of a massive and renewable valeric biofuel production into a reality.

One-Pot Conversion of Furfural to γ-Valerolactone over Co- and Pt-Doped ZSM-5 Catalysts

γ-Valerolactone (GVL) is one of the useful biomass compounds produced via different reaction pathways from hemicellulose. In this study, Co- and Pt-doped/ZSM-5 catalysts with different Co loadings (0–10 wt.%) and Pt loadings (0.5–2 wt.%) were prepared by impregnation method and employed in a one-pot conversion of furfural to GVL. The yield of GVL increased with increasing reaction temperature from 100 to 140 °C. At the reaction temperature of 120 °C, higher amounts of secondary products such as AL and IPL can be converted to GVL, especially on the Co- and Pt-modified ZSM-5 catalysts. Compared to the non-modified H-ZSM-5 (GVL yield 35.4%), Co- and Pt-doped ZSM-5 catalysts exhibited much higher yield of GVL with the 1%Pt/ZSM-5 catalyst showing the highest yield of GVL at 85.4% at 120 °C and 1 bar N2 without the use of liquid acid or external H2 supply. The catalyst performances were correlated to the physicochemical properties of the catalysts such as the amount and type of acid sites. The NH3-TPD and in situ FTIR spectra of pyridine adsorption results revealed that Co- and Pt-loaded on ZSM-5 enhanced Lewis and weak acid sites, which are beneficial for the reaction. The results present a simple strategy to obtain high GVL yield under relatively mild conditions.

Creating enzyme-mimicking nanopockets in metal-organic frameworks for catalysis

Numerous efforts are being made toward constructing artificial nanopockets inside heterogeneous catalysts to implement challenging reactions that are difficult to occur on traditional heterogeneous catalysts. Here, the enzyme-mimetic nanopockets are fabricated inside the typical UiO-66 by coordinating zirconium nodes with terephthalate (BDC) ligands and monocarboxylate modulators including formic acid (FC), acetic acid (AC), or trifluoroacetic acid (TFA). When used in transfer hydrogenation of alkyl levulinates with isopropanol toward γ-valerolactone (GVL), these modulators endow zirconium sites with enhanced activity and selectivity and good stability. The catalytic activity of UiO-66FC is ~30 times that of UiO-66, also outperforming the state-of-the-art heterogeneous catalysts. Distinct from general consensus on electron-withdrawing or electron-donating effect on the altered activity of metal centers, this improvement mainly originates from the conformational change of modulators in the nanopocket to assist forming the rate-determining six-membered ring intermediate at zirconium sites, which are stabilized by van der Waals force interactions.

Micro/mesoporous LTL derived materials for catalytic transfer hydrogenation and acid reactions of bio-based levulinic acid and furanics

The biomass-derived platform chemicals furfural and 5-(hydroxymethyl)furfural (HMF) may be converted to α-angelica lactone (AnL) and levulinic acid (LA). Presently, LA (synthesized from carbohydrates) has several multinational market players. Attractive biobased oxygenated fuel additives, solvents, etc., may be produced from AnL and LA via acid and reduction chemistry, namely alkyl levulinates and γ-valerolactone (GVL). In this work, hierarchical hafnium-containing multifunctional Linde type L (LTL) related zeotypes were prepared via top-down strategies, for the chemical valorization of LA, AnL and HMF via integrated catalytic transfer hydrogenation (CTH) and acid reactions in alcohol medium. This is the first report of CTH applications (in general) of LTL related materials. The influence of the post-synthesis treatments/conditions (desilication, dealumination, solid-state impregnation of Hf or Zr) on the material properties and catalytic performances was studied. AnL and LA were converted to 2-butyl levulinate (2BL) and GVL in high total yields of up to ca. 100%, at 200°C, and GVL/2BL molar ratios up to 10. HMF conversion gave mainly the furanic ethers 5-(sec-butoxymethyl)furfural and 2,5-bis(sec-butoxymethyl)furan (up to 63% total yield, in 2-butanol at 200°C/24 h). Mechanistic, reaction kinetics and material characterization studies indicated that the catalytic results depend on a complex interplay of different factors (material properties, type of substrate). The recovered-reused solids performed steadily.

Mechanism of Catalytic Transfer Hydrogenation for Furfural Using Single Ni Atom Catalysts Anchored to Nitrogen-Doped Graphene Sheets

Catalytic transfer hydrogenation (CTH) of α,β-unsaturated aldehydes using single metal atom catalysts supported on nitrogen-incorporated graphene sheet (M-N_x-Gr) materials has attracted increasing attention recently, yet the reaction mechanism remains to be explored. Compared to the Ni-N₄-Gr model in which the dissociation of isopropanol is highly unfavorable as a result of steric hindrance and inertness of the Ni-N₄ site embedded in graphene, the Ni-N₃ site in Ni-N₃-Gr is more active and facilitates the formation of *H with isopropanol as the H donor, where the dissociation of H from isopropanol with an energy barrier of 0.83 eV is the rate-determining step. An alternative reaction path starts from the coadsorption of isopropanol and furfural molecules at the Ni-N₃ site, followed by a direct hydrogen transfer between the two molecules; however, the rate-determining step has a much higher energy barrier of 1.32 eV. Our calculations suggest that the hydrogenation of the aldehyde group is kinetically more favorable than the C═C hydrogenation, revealing the high chemoselectivity of furfural to furfuryl alcohol. Our investigations reveal that the CTH mechanism using the Ni-N₃-Gr catalyst is different from that on traditional metal oxides, where the former has only one single active site, while two active sites are required for the latter. The proposed reaction mechanism of CTH for furfural in this study should be helpful to guide the design of single metal atom catalysts with appropriate N coordination for application in chemoselective hydrogenation reactions.

Research Progress on the Photo-Driven Catalytic Production of Biodiesel

Biodiesel considered a green, environmentally friendly, and renewable energy source is one of the most promising candidates to replace fossil fuels to supply energy for the world. The conventional thermocatalytic methods have been extensively explored for producing biodiesel, while inevitably encountering some drawbacks, such as harsh operating conditions and high energy consumption. The catalytic production of biodiesel under mild conditions is a research hotspot but with difficulty. Photocatalysis has recently been highlighted as an eco-friendly and energy-saving approach for biodiesel production. This mini-review summarizes typical photocatalysts for biodiesel production and discusses in detail the catalytic mechanism and strategies of the photo-driven (trans)esterification to produce biodiesel. The current challenges and future opportunities of photo-driven catalysis to prepare biodiesel are also outlined, in steps towards guiding the design of advanced photocatalysts for biodiesel production.

Production of pentyl valerate from γ-valerolactone, pentanol and H2 using Pd and Rh-based bifunctional catalysts

Easily prepared SiO2–Al2O3-supported Rh and Pd-based catalysts exhibit high activity and selectivity in the pentyl valerate production in liquid phase from γ-valerolactone, pentanol and H2, reaching the highest reported productivity.

Recyclable Zr/Hf-Containing Acid-Base Bifunctional Catalysts for Hydrogen Transfer Upgrading of Biofuranics: A Review

The massive burning of a large amount of fossil energy has caused a lot of serious environmental issues (e.g., air pollution and climate change), urging people to efficiently explore and valorize sustainable alternatives. Biomass is being deemed as the only organic carbon-containing renewable resource for the production of net-zero carbon emission fuels and fine chemicals. Regarding this, the selective transformation of high-oxygen biomass feedstocks by catalytic transfer hydrogenation (CTH) is a very promising strategy to realize the carbon cycle. Among them, the important Meerwein-Ponndorf-Verley (MPV) reaction is believed to be capable of replacing the traditional hydrogenation strategy which generally requires high-pressure H2 and precious metals, aiming to upgrade biomass into downstream biochemical products and fuels. Employing bifunctional heterogeneous catalysts with both acidic and basic sites is needed to catalyze the MPV reaction, which is the key point for domino/cascade reaction in one pot that can eliminate the relevant complicated separation/purification step. Zirconium (Zr) and hafnium (Hf), belonging to transition metals, rich in reserves, can demonstrate similar catalytic efficiency for MPV reaction as that of precious metals. This review introduced the application of recyclable heterogeneous non-noble Zr/Hf-containing catalysts with acid-base bifunctionality for CTH reaction using the safe liquid hydrogen donor. The corresponding catalysts were classified into different types including Zr/Hf-containing metal oxides, supported materials, zeolites, metal-organic frameworks, metal-organic hybrids, and their respective pros and cons were compared and discussed comprehensively. Emphasis was placed on evaluating the bifunctionality of catalytic material and the key role of the active site corresponding to the structure of the catalyst in the MPV reaction. Finally, a concise summary and prospect were also provided centering on the development and suggestion of Zr/Hf-containing acid-base bifunctional catalysts for CTH.

Catalytic Stereoselective Conversion of Biomass-Derived 4'-Methoxypropiophenone to Trans-Anethole with a Bifunctional and Recyclable Hf-Based Polymeric Nanocatalyst

Anethole (AN) is widely used as an odor cleaner in daily necessities, and can also be applied in the fields of food additives, drug synthesis, natural preservatives, and polymeric materials' preparation. Considering environmental and economic benefits, the use of biomass raw materials with non-precious metal catalysts to prepare high-value fine chemicals is a very promising route. Here, we developed an acid-base bifunctional polymeric material (PhP-Hf (1:1.5)) composed of hafnium and phenylphosphonate in a molar ratio of 1:1.5 for catalytic conversion of biomass-derived 4'-methoxypropiophenone (4-MOPP) to AN via cascade Meerwein-Pondorf-Verley (MPV) reduction and dehydration reactions in a single pot. Compared with the traditional catalytic systems that use high-pressure hydrogen as a hydrogen donor, alcohol can be used as a safer and more convenient hydrogen source and solvent. Among the tested alcohols, 2-pentanol was found to be the best candidate in terms of pronounced selectivity. A high AN yield of 98.1% at 99.8% 4-MOPP conversion (TOF: 8.5 h^-1) could be achieved over PhP-Hf (1:1.5) at 220 °C for 2 h. Further exploration of the reaction mechanism revealed that the acid and base sites of PhP-Hf (1:1.5) catalyst synergistically promote the MPV reduction step, while the Brønsted acid species significantly contribute to the subsequent dehydration step. In addition, the PhP-Hf polymeric nanocatalyst can be recycled at least five times, showing great potential in the catalytic conversion of biomass.

Falling Leaves Return to Their Roots: A Review on the Preparation of γ-Valerolactone from Lignocellulose and Its Application in the Conversion of Lignocellulose

γ-Valerolactone (GVL), derived from renewable lignocellulosic biomass, has been considered as a cost-competitive and green platform chemical. With the increasingly prominent environmental problems, a deep understanding of the preparation and transformation of GVL is highly needed. Based on the latest progress made with GVL, preparation and applications of GVL are summarized and discussed in this Review. In particular, the state-of-the-art in catalytic production of GVL is described based on the use of noble-metal and non-noble-metal catalysts. The application of GVL for the valorization of lignocellulose would improve the yield of target products such as sugar monomers and furfural. Thus, GVL can be produced from lignocellulose and simultaneously it can also be used for the valorization of lignocellulose, just as in the sustainable and renewable cycle, "the falling leaves returns to their roots". This Review is expected to provide valuable reference and new proposal for the further development and better utilization of GVL.

Heteropoly Acid-Based Catalysts for Hydrolytic Depolymerization of Cellulosic Biomass

Cellulose is the most abundant source of biomass, which can be converted into monosaccharide or other chemical platform molecules for the sustainable production of chemicals and fuels. Acid catalysts can promote hydrolytic degradation of cellulose into valuable platform molecules, which is of great significance in the development of chemicals and biofuels. However, there are still some shortcomings and limitations of the catalysts for the hydrolytic degradation of cellulosic biomass. Heteropoly acid (HPA), as a green catalyst, seems to be more conducive to the degradation of cellulosic biomass due to its extreme acidity. HPAs can be designed in homogeneous and heterogeneous systems. Moreover, they can be easily separated from the products in both systems by a simple extraction process. According to the unique properties of HPAs (e.g., good solubility, high thermal stability, and strong acidity), using heteropoly acid-based catalysts to depolymerize and convert cellulose into value-added chemicals and biofuels has become one of the most remarkable processes in chemistry for sustainability. In this review, the characteristics, advantages, and applications of HPAs in different categories for cellulose degradation, especially hydrolysis hydrolytic degradation, are summarized. Moreover, the mechanisms of HPAs catalysts in the effective degradation of cellulosic biomass are discussed. This review provides more avenues for the development of renewed and robust HPAs for cellulose degradation in the future.

Recent advances in liquid hydrosilane-mediated catalytic N-formylation of amines with CO2

Carbon dioxide is an ideal raw material for the synthesis of complex organic compounds because of its rich, non-toxic, and good physical properties. It is of great significance to transform CO₂ into valuable fine chemicals and develop a green sustainable cycle of carbon surplus. Based on hydrosilane as a reducing agent, this work summarizes the recent applications of reductive amidation of CO₂ using different catalysts such as organocatalysts, ionic liquids (ILs), salts, transition metal complexes, and solvents. The main factors affecting the reductive amidation of CO₂ and the possible reaction mechanism are discussed. Moreover, the future orientation and catalytic systems of the formylation of amines with CO₂ and hydrosilane are prospected.

This review depicts different types of catalyst systems developed for upgrading of amines and carbon dioxide into N-formylated products in the presence of hydrosilane, with attention on reaction mechanism and process optimization.

An Effective Heterogeneous Catalyst of [BMIM]3 PMo12 O40 for Selective Sugar Epimerization

The development of heterogeneous catalysts for the epimerization of sugars has received much less attention than that for the isomerization of sugars. To date, molybdates are the most effective catalysts for the epimerization of sugars, although they lack stability toward hydrolysis of their active sites in water. To solve the issue of the formation of a highly water-soluble heteropolyblue (PMo_red ) for phosphomolybdates (PMos) in aqueous reaction systems, herein, a 1-butyl-3-methylimidazolium phosphomolybdate ([BMIM]₃ PMo₁₂ O₄₀ ) was synthesized through an ion-exchange method. This catalyst was effective and selective for the C2-epimerization of sugars under mild reaction conditions (<100 °C; 1-2 h) with good water-tolerant properties. The reaction was confirmed to occur in a heterogeneous manner and no leaching of PMo_red was detected by means of UV/Vis spectroscopy. Moreover, the catalyst can be simply separated by filtration and reused for at least eight cycles without a drop in catalytic activity. XRD, FTIR, and X-ray photoelectron spectroscopy measurements indicate that the catalyst is stable under the reaction conditions. In a comparison of the catalytic activity and surface wettability with those of other PMo salts, that is, 1-ethyl-3-methylimidazolium phosphomolybdate ([EMIM]₃ PMo₁₂ O₄₀ ), 1-hexyl-3-methylimidazolium ([HexMIM]₃ PMo₁₂ O₄₀ ), [choline]₃ PMo₁₂ O₄₀ , and cetyltrimethylammonium phosphomolybdate ([CTA]₃ PMo₁₂ O₄₀ ), it is found that [BMIM]₃ PMo₁₂ O₄₀ has more appropriate hydrophobic-hydrophilic balance, which should be responsible for better catalytic activity and stability.

Ruthenium p-cymene complexes with α-diimine ligands as catalytic precursors for the transfer hydrogenation of ethyl levulinate to γ-valerolactone

Cationic Ru(ii) arene complexes with α-diimine ligands were investigated as catalytic precursors in the transfer hydrogenation of ethyl levulinate to γ-valerolactone from isopropanol under MW irradiation.

Orderly Layered Zr-Benzylphosphonate Nanohybrids for Efficient Acid-Base-Mediated Bifunctional/Cascade Catalysis

The development of functional metal-organic materials that are robust and active for bifunctional/cascade catalysis is of great significance. Herein, a series of mesoporous and orderly layered nanohybrids were synthesized for the first time through simple and template-free assembly of ortho-, meta-, or para-xylylenediphosphonates (o-, p-, or m-PhP) containing zirconium. It was found that m-PhPZr nanoparticles (20-50 nm) with mesopores centered at 7.9 nm and high Lewis acid-base site ratio (1:0.7) showed excellent performance under mild conditions (as low as 82 °C) in transfer hydrogenation of carbonyl compounds, including bioaldehydes and alcohols, with near quantitative yields and little Zr leaching. Isotopic labeling studies indicated the occurrence of direct hydrogen transfer rather than metal hydride route by bifunctional catalysis. Lewis acidic (Zr) and basic (PO₃ ) centers of the heterogeneous catalyst were further revealed to play a synergistic role in one-pot cascade transformations, for example, of ethyl levulinate to γ-valerolactone and glucose to 5-hydroxymethylfurfural.

MIL-100(Fe)-catalyzed efficient conversion of hexoses to lactic acid

Lewis acidic metal–organic framework (MOF), MIL-100(Fe), was for the first time demonstrated to be efficient for the catalytic transformation of hexose sugars into lactic acid.

Heterogeneously Catalyzed Hydrothermal Processing of C5-C6 Sugars

Biomass has been long exploited as an anthropogenic energy source; however, the 21st century challenges of energy security and climate change are driving resurgence in its utilization both as a renewable alternative to fossil fuels and as a sustainable carbon feedstock for chemicals production. Deconstruction of cellulose and hemicellulose carbohydrate polymers into their constituent C₅ and C₆ sugars, and subsequent heterogeneously catalyzed transformations, offer the promise of unlocking diverse oxygenates such as furfural, 5-hydroxymethylfurfural, xylitol, sorbitol, mannitol, and gluconic acid as biorefinery platform chemicals. Here, we review recent advances in the design and development of catalysts and processes for C₅-C₆ sugar reforming into chemical intermediates and products, and highlight the challenges of aqueous phase operation and catalyst evaluation, in addition to process considerations such as solvent and reactor selection.

Effective conversion of biomass-derived ethyl levulinate into γ-valerolactone over commercial zeolite supported Pt catalysts

Selective hydrogenation of biomass-derived ethyl levulinate into γ-valerolactone over commercial zeolite supported catalysts was performed, and high yield was obtained.