An Unsymmetrical, Push-Pull Porphyrazine for Dye-Sensitized Solar Cells

Self-Assembled Monolayers of Push-Pull Chromophores as Active Layers and Their Applications

In recent decades, considerable attention has been focused on the design and development of surfaces with defined or tunable properties for a wide range of applications and fields. To this end, self-assembled monolayers (SAMs) of organic compounds offer a unique and straightforward route of modifying and engineering the surface properties of any substrate. Thus, alkane-based self-assembled monolayers constitute one of the most extensively studied organic thin-film nanomaterials, which have found wide applications in antifouling surfaces, the control of wettability or cell adhesion, sensors, optical devices, corrosion protection, and organic electronics, among many other applications, some of which have led to their technological transfer to industry. Nevertheless, recently, aromatic-based SAMs have gained importance as functional components, particularly in molecular electronics, bioelectronics, sensors, etc., due to their intrinsic electrical conductivity and optical properties, opening up new perspectives in these fields. However, some key issues affecting device performance still need to be resolved to ensure their full use and access to novel functionalities such as memory, sensors, or active layers in optoelectronic devices. In this context, we will present herein recent advances in π-conjugated systems-based self-assembled monolayers (e.g., push-pull chromophores) as active layers and their applications.

Tuning the Acceptor Unit of Push-Pull Porphyrazines for Dye-Sensitized Solar Cells

A family of four push–pull porphyrazines of A₃B type, where each unit A contains two peripheral propyl chains and the unit B is endowed with a carboxylic acid, were prepared. The carboxylic acid was attached to the β-position of the pyrrolic unit, either directly (Pz 10), or through cyanovinyl (Pz 11) and phenyl (Pz 7) groups. The fourth Pz (14) consisted in a pyrazinoporphyrazine wherein the dinitrogenated heterocycle provided intrinsic donor–acceptor character to the macrocycle and contained a carboxyphenyl substituent. The direct attachment of the carboxylic acid functions and their linkers to the porphyrazine core produces stronger perturbation on the electronic properties of the macrocycle, with respect to their connection through fused benzene or pyrazine rings in TT112 and 14, respectively. The HOMO and LUMO energies of the Pzs, which were estimated with DFT calculations, show little variation within the series, except upon introduction of the cyanovinyl spacer, which produces a decrease in both frontier orbital energetic levels. This effective interaction of cyanovinyl substitution with the macrocycle is also evidenced in UV/Vis spectroscopy, where a large splitting of the Q-band indicates strong desymmetrization of the Pz. The performance of the four Pzs as photosensitizers in DSSCs were also investigated.

Insight into the effects of the anchoring groups on the photovoltaic performance of unsymmetrical phthalocyanine based dye-sensitized solar cells

Push-pull zinc phthalocyanine dyes bearing hexylsulfanyl moieties as electron donors and carboxyethynyl as mono- or di-anchoring groups have been designed, synthesized and tested as sensitizers in dye-sensitized solar cells (DSSCs). The effects of the anchoring groups on the optical, electrochemical and photovoltaic properties were investigated. The incorporation of a carboxyethynyl group in GT23 has a considerable effect on preventing dye aggregation due to its relatively non-planar structure. The mono-anchoring dye bearing a phenyl carboxyethynyl group, GT5, has a higher molar extinction coefficient and sufficient charge injection into the TiO2 conduction band. Therefore, GT5 achieved at least 90% higher power conversion efficiency than the di-anchoring dyes (GT31 and GT32). Time-dependent density functional theory (PBE0/6-31G(d,p)) was also used to calculate the electronic absorption spectra, which predicted very well the measured UV-Vis with an error of up to 0.11 eV for the Q bands and 0.3 eV for the B bands. The longest charge transfer bands are obtained in the visible light region and they correspond to a transfer phthalocyanine core → substituent with a carboxyethynyl group where the absorptions of GT32 (465 nm) and GT31 (461 nm) are red-shifted compared to GT23 (429 nm) and GT5 (441 nm). The interaction energy between the phthalocyanine and a cluster of anatase-TiO2 (H4Ti40O82) was calculated using density functional theory. For all phthalocyanines, the interaction favored is monodentate and corresponds to -O(OH)Ti(TiO2), where the stronger interaction occurs for GT32 (-2.11 eV) and GT31 (-2.25 eV). This study presents the molecular combination of the anchoring groups in zinc phthalocyanine sensitizers, which is one of the effective strategies for improving the performance of DSSCs.

Photoactive layers for photovoltaics based on near-infrared absorbing aryl-substituted naphthalocyanine complexes: preparation and investigation of properties

Photoactive layers based on substituted naphthalocyanines and conductive polymer MEH-PPV were prepared using the spin-coating technique and their conductivity was tested in dark and under illumination.

Effects of interfacial adsorption configurations on dye-sensitized solar cell performance at the stoichiometric and defective TiO2 anatase (101) surfaces: a theoretical investigation

Interfacial adsorption configuration plays a crucial role in influencing the photovoltaic performance of dye-sensitized solar cells (DSSCs), and thus, theoretical investigations are needed to further understand the impacts of different absorption configurations on stoichiometric and defective TiO2(101) surfaces on the short-circuit photocurrent density (JSC) and open-circuit voltage (VOC) of DSSCs. Herein, calculations of isolated dyes and dye/TiO2 systems were performed on the donor-π bridge-acceptor (D-π-A) type porphyrin sensitizers bearing different donor moieties and an α-cyanoacrylic acid anchoring group (T1-3), using DFT and TD-DFT methods. And, for the first time, comparative analysis of interfacial electron transfer (IET) and density of states (DOS) were carried out on dye/TiO2 systems with stoichiometric and defective surfaces to provide further insight into the electronic factors influencing the efficiency of DSSCs, which can well explain the experimental variation trends of JSC and VOC values. It turned out that attachment via the carboxyl and cynao groups in a tridentate binding mode can result in more efficient IET rates and an upshifted conduction band in comparison with those of the bidentate attachment. More interestingly, we found that the adsorption configuration on defective surfaces containing an O2c vacancy induced more upshifted CBM and relatively fast IET, especially for the bonding mode through two O atoms of the carboxyl group.

Light-harvesting porphyrazines to enable intramolecular singlet fission

A porphyrazine featuring complementary absorption to a pentacene dimer was chosen to fill the absorption gap of the latter in the range of 450 to 600 nm to realize panchromatic absorption through the visible region out to ca. 700 nm. Of even greater relevance is the quantitative intramolecular Förster resonance energy transfer (i-FRET) to funnel energy to the pentacene moieties, where efficient intramolecular singlet fission (i-SF) converts the singlet excited state into the corresponding triplet excited states. Remarkably, the triplet quantum yield either via direct excitation or via indirect i-FRET is up to 200% ± 20% in polar solvents.

Role of hexyloxy groups in zinc phthalocyanines bearing sulfonic acid anchoring groups for dye-sensitized solar cells

Zinc phthalocyanine dyes bearing four sulfonic acid anchoring groups with (A-ZnPc) and without (H-ZnPc) four chloro and eight hexyloxy groups were used as sensitizers for dye-sensitized solar cells (DSSCs). The dyes were investigated in terms of their optical, electrochemical and photovoltaic properties. The presence of these groups in dye A-ZnPc resulted in both red-shifted absorption and decreased dye aggregation, which are beneficial for the improvement of device performance. In the presence of chenodeoxycholic acid (CDCA) as a coadsorbent, the DSSC based on H-ZnPc shows a power conversion efficiency (PCE) of 0.96%, which is improved by [Formula: see text]40% as compared to the device without CDCA. However, the PCE of an A-ZnPc-based device with CDCA slightly enhances from 1.15% (without CDCA) to 1.22%, indicating that the bulky hexyloxy groups with large steric hindrance can effectively suppress aggregation of the adsorbed dye. The results showed that the zinc phthalocyanine dye bearing bulky hexyloxy groups is a promising candidate to construct efficient coadsorbent-free DSSCs.

Self-Assembled Porphyrazine Nucleosides on DNA Templates: Highly Fluorescent Chromophore Arrays and Sizing Forensic Tandem Repeat Sequences

The formation of chromophore arrays using a DNA templating approach leads to the creation of supramolecular assemblies, where the optical properties of the overall system can be fine-tuned to a large extent. In particular, porphyrin derivatives have been shown to be versatile building blocks; mostly covalent chemistry was used for embedding the units into DNA strands. Self-assembly of porphyrin modified nucleosides, on the other hand, has not been investigated as a simplified approach. We report on the synthesis of a magnesium(II) tetraaza porphine (MgTAP) coupled to deoxyuridine, and array formation on DNA templates which contain well-defined oligo(dA) segments showing strong fluorescence enhancement which is significantly larger than that with a Zn-porphyrin. The use of the deep-eutectic solvent glycholine is essential for successful assembly formation. The system allows for sizing of short tandem repeat markers with multiple adenosines, thus the concept could be adaptable to in vitro forensic DNA profiling with a suitable set of different chromophores on all nucleosides.

Panchromatic Photosensitizers Based on Push-Pull, Unsymmetrically Substituted Porphyrazines

A series of five push-pull porphyrazines of A₃ B type, in which unit B is an isoindole 4-carboxylic acid, has been prepared. The units A have been endowed with thioether, amine, ether and alkyl functions, either directly attached to the β-position of the pyrrolic units, or connected to the porphyrazine core through p-substituted phenyl groups. Attaching the electron-donor functions to the porphyrazine periphery produces strong perturbations in the electronic and redox properties of the dyes. Their HOMO and LUMO energies, estimated from the optical and redox data, as well as with DFT calculations, raise upon functionalization with amines, while the corresponding frontier orbital energetic levels lower upon functionalization with thioethers, p-methoxyphenyl or p-tert-butylphenyl groups. The effective interaction of peripheral substitution with the macrocycle produces chromophores with panchromatic absorption between 300 and 750-850 nm.