Flavins secreted by bacterial cells of Shewanella catalyze cathodic oxygen reduction

Putting the electro-bugs to work: A systematic review of 22 years of advances in bio-electrochemical systems and the parameters governing their performance

Wastewater treatment using bioelectrochemical systems (BESs) can be considered as a technology finding application in versatile areas such as for renewable energy production and simultaneous reducing environmental problems, biosensors, and bioelectrosynthesis. This review paper reports and critically discusses the challenges, and advances in bio-electrochemical studies in the 21st century. To sum and critically analyze the strides of the last 20+ years on the topic, this study first provides a comprehensive analysis on the structure, performance, and application of BESs, which include Microbial Fuel Cells (MFCs), Microbial Electrolysis Cells (MECs) and Microbial Desalination Cells (MDCs). We focus on the effect of various parameters, such as electroactive microbial community structure, electrode material, configuration of bioreactors, anode unit volume, membrane type, initial COD, co-substrates and the nature of the input wastewater in treatment process and the amount of energy and fuel production, with the purpose of showcasing the modes of operation as a guide for future studies. The results of this review show that the BES have great potential in reducing environmental pollution, purifying saltwater, and producing energy and fuel. At a larger scale, it aspires to facilitate the path of achieving sustainable development and practical application of BES in real-world scenarios.

The material-microorganism interface in microbial hybrid electrocatalysis systems

This review presents a comprehensive summary of the material-microorganism interface in microbial hybrid electrocatalysis systems. Microbial hybrid electrocatalysis has been developed to combine the advantages of inorganic electrocatalysis and microbial catalysis. However, electron transfer at the interfaces between microorganisms and materials is a very critical issue that affects the efficiency of the system. Therefore, this review focuses on the electron transfer at the material-microorganism interface and the strategies for building efficient microorganism and material interfaces. We begin with a brief introduction of the electron transfer mechanism in both the bioanode and biocathode of bioelectrochemical systems to understand the material-microorganism interface. Next, we summarise the strategies for constructing efficient material-microorganism interfaces including material design and modification and bacterial engineering. We also discuss emerging studies on the bio-inorganic hybrid electrocatalysis system. Understanding the interface between electrode/active materials and the microorganisms, especially the electron transfer processes, could help to drive the evolution of material-microorganism hybrid electrocatalysis systems towards maturity.

Direct microbial electron uptake as a mechanism for stainless steel corrosion in aerobic environments

Shewanella oneidensis MR-1 is an attractive model microbe for elucidating the biofilm-metal interactions that contribute to the billions of dollars in corrosion damage to industrial applications each year. Multiple mechanisms for S. oneidensis-enhanced corrosion have been proposed, but none of these mechanisms have previously been rigorously investigated with methods that rule out alternative routes for electron transfer. We found that S. oneidensis grown under aerobic conditions formed thick biofilms (∼50 µm) on stainless steel coupons, accelerating corrosion over sterile controls. H₂ and flavins were ruled out as intermediary electron carriers because stainless steel did not reduce riboflavin and previous studies have demonstrated stainless does not generate H₂. Strain ∆mtrCBA, in which the genes for the most abundant porin-cytochrome conduit in S. oneidensis were deleted, corroded stainless steel substantially less than wild-type in aerobic cultures. Wild-type biofilms readily reduced nitrate with stainless steel as the sole electron donor under anaerobic conditions, but strain ∆mtrCBA did not. These results demonstrate that S. oneidensis can directly consume electrons from iron-containing metals and illustrate how direct metal-to-microbe electron transfer can be an important route for corrosion, even in aerobic environments.

Long-term operation of bio-catalyzed cathodes within continuous flow membrane-less microbial fuel cells

Microorganisms were observed to facilitate cathodic oxygen reduction and enhance cathode performance of microbial fuel cells (MFCs). However, the long-term activity and stability of bio-catalyzed cathode needs to be explored. This study evaluated the long-term performance of bio-catalyzed cathode and iron(II) phthalocyanine (FePc)-catalyzed cathode MFCs through effluent water quality, electricity production and electrochemical impedance spectroscopy (EIS) analysis under different scenarios, including conventional wastewater treatment and energy harvesting using a power management system (PMS). During the continuous operation, both systems demonstrated high chemical oxygen demand and ammonium removal, but bio-catalyzed cathode MFCs could achieve significantly better total nitrogen removal than FePc-catalyzed cathode MFCs. The FePc-coated cathode showed constant cathode potential during the entire operation period, but the biocathode showed varied but step-wise increased cathode potential to achieve more than 500 mV versus the standard hydrogen electrode, likely due to the gradual enrichment of biocathode biofilm. EIS analysis revealed that biocathode had higher ohmic resistance than bare carbon felt cathode but the microbial biofilm could largely decrease polarization resistance of cathode material. Microbial community analysis has shown the presence of nitrifying and denitrifying bacteria in the bio-catalyzed cathode biofilm. When connecting PMS, both bio-catalyzed cathode and FePc-catalyzed cathode MFCs successfully charged a capacitor, but the bio-catalyzed cathode MFC voltage significantly dropped to less than 100 mV after charging for 91 h, and gradually recovered when disconnecting PMS. This study has demonstrated the potential application of oxygen reduction bio-catalyzed cathode MFCs for continuous wastewater treatment and energy harvesting for long period of time.

Construction of an Electron Transfer Mediator Pathway for Bioelectrosynthesis by Escherichia coli

Microbial electrosynthesis (MES) or electro-fermentation (EF) is a promising microbial electrochemical technology for the synthesis of valuable chemicals or high-value fuels with aid of microbial cells as catalysts. By introducing electrical energy (current), fermentation environments can be altered or controlled in which the microbial cells are affected. The key role for electrical energy is to supply electrons to microbial metabolism. To realize electricity utility, a process termed inward extracellular electron transfer (EET) is necessary, and its efficiency is crucial to bioelectrochemical systems. The use of electron mediators was one of the main ways to realize electron transfer and improve EET efficiency. To break through some limitation of exogenous electron mediators, we introduced the phenazine-1-carboxylic acid (PCA) pathway from Pseudomonas aeruginosa PAO1 into Escherichia coli. The engineered E. coli facilitated reduction of fumarate by using PCA as endogenous electron mediator driven by electricity. Furthermore, the heterologously expressed PCA pathway in E. coli led to better EET efficiency and a strong metabolic shift to greater production of reduced metabolites, but lower biomass in the system. Then, we found that synthesis of adenosine triphosphate (ATP), as the "energy currency" in metabolism, was also affected. The reduction of menaquinon was demonstrated as one of the key reactions in self-excreted PCA-mediated succinate electrosynthesis. This study demonstrates the feasibility of electron transfer between the electrode and E. coli cells using heterologous self-excreted PCA as an electron transfer mediator in a bioelectrochemical system and lays a foundation for subsequent optimization.

Performance of different methanogenic species for the microbial electrosynthesis of methane from carbon dioxide

Microbial electrosynthesis (MES) is a promising technology to convert CO₂ and electricity into the biofuel methane using methanogens. Until now, most investigations on electro-methanogenesis are "proof-of-principle" studies. In this paper, different strains were quantitatively compared in regard to final methane concentration, yields based on CO₂-conversion, productivities as well as Coulombic efficiencies in order to identify suitable organisms for MES. Methanococcus vannielii, Methanococcus maripaludis, Methanolacinia petrolearia, Methanobacterium congolense, and Methanoculleus submarinus were able to produce methane via MES at -700 mV vs. standard hydrogen electrode (SHE). Beside methane also biological H₂ production was detected during MES, which might be due to the involvement of hydrogenases. A direct electron transfer pathway is most likely. Obviously, M. maripaludis is the most resource efficient methane producer in microbial electrosynthesis regarding the methane productivity (8.81 ± 0.51 mmol m^-2 d^-1) and the Coulombic efficiency (58.9 ± 0.8%).

A Novel Shewanella Isolate Enhances Corrosion by Using Metallic Iron as the Electron Donor with Fumarate as the Electron Acceptor

The involvement of Shewanella spp. in biocorrosion is often attributed to their Fe(III)-reducing properties, but they could also affect corrosion by using metallic iron as an electron donor. Previously, we isolated Shewanella strain 4t3-1-2LB from an acetogenic community enriched with Fe(0) as the sole electron donor. Here, we investigated its use of Fe(0) as an electron donor with fumarate as an electron acceptor and explored its corrosion-enhancing mechanism. Without Fe(0), strain 4t3-1-2LB fermented fumarate to succinate and CO₂, as was shown by the reaction stoichiometry and pH. With Fe(0), strain 4t3-1-2LB completely reduced fumarate to succinate and increased the Fe(0) corrosion rate (7.0 ± 0.6)-fold in comparison to that of abiotic controls (based on the succinate-versus-abiotic hydrogen formation rate). Fumarate reduction by strain 4t3-1-2LB was, at least in part, supported by chemical hydrogen formation on Fe(0). Filter-sterilized spent medium increased the hydrogen generation rate only 1.5-fold, and thus extracellular hydrogenase enzymes appear to be insufficient to explain the enhanced corrosion rate. Electrochemical measurements suggested that strain 4t3-1-2LB did not excrete dissolved redox mediators. Exchanging the medium and scanning electron microscopy (SEM) imaging indicated that cells were attached to Fe(0). It is possible that strain 4t3-1-2LB used a direct mechanism to withdraw electrons from Fe(0) or favored chemical hydrogen formation on Fe(0) through maintaining low hydrogen concentrations. In coculture with an Acetobacterium strain, strain 4t3-1-2LB did not enhance acetogenesis from Fe(0). This work describes a strong corrosion enhancement by a Shewanella strain through its use of Fe(0) as an electron donor and provides insights into its corrosion-enhancing mechanism.IMPORTANCE Shewanella spp. are frequently found on corroded metal structures. Their role in microbial influenced corrosion has been attributed mainly to their Fe(III)-reducing properties and, therefore, has been studied with the addition of an electron donor (lactate). Shewanella spp., however, can also use solid electron donors, such as cathodes and potentially Fe(0). In this work, we show that the electron acceptor fumarate supported the use of Fe(0) as the electron donor by Shewanella strain 4t3-1-2LB, which caused a (7.0 ± 0.6)-fold increase of the corrosion rate. The corrosion-enhancing mechanism likely involved cell surface-associated components in direct contact with the Fe(0) surface or maintenance of low hydrogen levels by attached cells, thereby favoring chemical hydrogen formation by Fe(0). This work sheds new light on the role of Shewanella spp. in biocorrosion, while the insights into the corrosion-enhancing mechanism contribute to the understanding of extracellular electron uptake processes.

Ferrous ion regulated extracellular electron transfer: towards self-suppressed microbial iron(iii) oxide reduction

Here, by using an electrochemical strategy, we demonstrated that ferrous ions are capable of regulating the bacterial EET process in a certain potential range where the conduction-band edge of natural abundant iron(iii) oxides is located.

Theoretical exploration of optimal metabolic flux distributions for extracellular electron transfer by Shewanella oneidensis MR-1

BACKGROUND

Shewanella oneidensis MR-1 is one of the model microorganisms used for extracellular electron transfer. In this study, to elucidate the capability and the relevant metabolic processes of S. oneidensis MR-1 involved in an electron transferring environment, we employed genome-scale modelling to model the necessary metabolic states and flux adjustments for electricity generation in the cytochrome c-based direct electron transfer (DET) mode, the NADH-linked mediated electron transfer (MET) mode and a presumable mixed mode comprising DET and flavin secretion. These are difficult to develop experimentally.

RESULTS

The results showed that the microbe had the potential to achieve current outputs of up to 2.610 A/gDW in the DET mode, 2.189 A/gDW in the MET mode and 2.197 A/gDW in the mixed mode. Compared with the DET mode, which relied on cytochrome c oxidase (EC: 1.1.1.2) to mediate the electron transfer, the MET mode was mainly dependent on two routes, catalysed by isocitrate dehydrogenase (NAD) (EC: 1.1.1.4) and NAD transhydrogenase, for the computed high current density value. In the mixed mode, whereas the cytochrome c-based DET accounted for most of the computed maximum current output value, the two flavins combined, riboflavin and FMN, played a much less important role in the probed current value.

CONCLUSIONS

Shewanella oneidensis MR-1 has the potential to sustain a high extracellular electron transfer rate similarly to Geobacter sulfurreducens, but relies on different intracellular mechanisms. Various levels of electron transfer rates are achieved by different combinations of metabolic pathways. Flavins can significantly degenerate the maximum electricity generation capability of the cell and the biomass formation, and thus should be avoided in order to achieve a high coulombic efficiency.

Hybrid bio-organic interfaces with matchable nanoscale topography for durable high extracellular electron transfer activity

Here, we developed a novel hybrid bio-organic interface with matchable nano-scale topography between a polypyrrole nanowire array (PPy-NA) and the bacterium Shewanella, which enabled a remarkably increased extracellular electron transfer (EET) current from genus Shewanella over a rather long period. PPy-NA thus exhibited outstanding performance in mediating bacterial EET, which was superior to normal electrodes such as carbon plates, Au and tin-doped In₂O₃. It was proposed that the combined effect of the inherent electrochemical nature of PPy and the porous structured bacterial network that was generated on the PPy-NA enabled long-term stability, while the high efficiency was attributed to the enhanced electron transfer rate between PPy-NA and microbes caused by the enhanced local topological interactions.

Enhanced performance of hexavalent chromium reducing cathodes in the presence of Shewanella oneidensis MR-1 and lactate

Biocathodes for the reduction of the highly toxic hexavalent chromium (Cr(VI)) were investigated using Shewanella oneidensis MR-1 (MR-1) as a biocatalyst and performance was assessed in terms of current production and Cr(VI) reduction. Potentiostatically controlled experiments (-500 mV vs Ag/AgCl) showed that a mediatorless MR-1 biocathode started up under aerated conditions in the presence of lactate, received 5.5 and 1.7 times more electrons for Cr(VI) reduction over a 4 h operating period than controls without lactate and with lactate but without MR-1, respectively. Cr(VI) reduction was also enhanced, with a decrease in concentration over the 4 h operating period of 9 mg/L Cr(VI), compared to only 1 and 3 mg/L, respectively, in the controls. Riboflavin, an electron shuttle mediator naturally produced by MR-1, was also found to have a positive impact in potentiostatically controlled cathodes. Additionally, a microbial fuel cell (MFC) with MR-1 and lactate present in both anode and cathode produced a maximum current density of 32.5 mA/m(2) (1000 Ω external load) after receiving a 10 mg/L Cr(VI) addition in the cathode, and cathodic efficiency increased steadily over an 8 day operation period with successive Cr(VI) additions. In conclusion, effective and continuous Cr(VI) reduction with associated current production were achieved when MR-1 and lactate were both present in the biocathodes.