One-Pot Anchoring of Pd Nanoparticles on Nitrogen-Doped Carbon through Dopamine Self-Polymerization and Activity in the Electrocatalytic Methanol Oxidation Reaction

Photocatalytic Hydrogen Production from Pure Water Using a IEF-11/g-C3N4 S-Scheme Heterojunction

Construction of S-scheme heterojunction offers a promising way to enhance the photocatalytic performance of photocatalysts for converting solar energy into chemical energy. However, the photocatalytic H2 production in pure water without sacrificial agents is still a challenge. Herein, the IEF-11 with the best photocatalytic H2 production performance in MOFs and suitable band structure was selected and firstly constructed with g-C3N4 to obtain a S-scheme heterojunction for photocatalytic H2 production from pure water. As a result, the novel IEF-11/g-C3N4 heterojunction photocatalysts exhibited significantly improved photocatalytic H2 production performance in pure water without any sacrificial agent, with a rate of 576 μmol/g/h, which is about 8 times than that of g-C3N4 and 23 times of IEF-11. The novel IEF-11/g-C3N4 photocatalysts also had a photocatalytic H2 production rate of up to 92 μmol/g/h under visible light and a good photocatalytic stability. The improved performance can be attributed to the efficient separation of photogenerated charge carriers, faster charge transfer efficiency and longer photogenerated carrier lifetimes, which comes from the forming of S-scheme heterojunction in the IEF-11/g-C3N4 photocatalyst. This work is a promising guideline for obtaining MOF-based or g-C3N4-based photocatalysts with great photocatalytic water splitting performance.

Establishment of Polydopamine-Modified HK-2 Cell Membrane Chromatography and Screening of Active Components from Plantago asiatica L

Cell membrane chromatography (CMC) has been widely recognized as a highly efficient technique for in vitro screening of active compounds. Nevertheless, conventional CMC approaches suffer from a restricted repertoire of cell membrane proteins, making them susceptible to oversaturation. Moreover, the binding mechanism between silica gel and proteins primarily relies on intermolecular hydrogen bonding, which is inherently unstable and somewhat hampers the advancement of CMC. Consequently, this investigation aimed to establish a novel CMC column that could augment protein loading, enhance detection throughput, and bolster binding affinity through the introduction of covalent bonding with proteins. This study utilizes polydopamine (PDA)-coated silica gel, which is formed through the self-polymerization of dopamine (DA), as the carrier for the CMC column filler. The objective is to construct the HK-2/SiO2-PDA/CMC model to screen potential therapeutic drugs for gout. To compare the quantity and characteristics of Human Kidney-2 (HK-2) cell membrane proteins immobilized on SiO2-PDA and silica gel, the proteins were immobilized on both surfaces. The results indicate that SiO2-PDA has a notably greater affinity for membrane proteins compared to silica gel, resulting in a significant improvement in detection efficiency. Furthermore, a screening method utilizing HK-2/SiO2-PDA/CMC was utilized to identify seven potential anti-gout compounds derived from Plantago asiatica L. (PAL). The effectiveness of these compounds was further validated using an in vitro cell model of uric acid (UA) reabsorption. In conclusion, this study successfully developed and implemented a novel CMC filler, which has practical implications in the field.

Recent advances in dopamine-based materials constructed via one-pot co-assembly strategy

Dopamine-based materials have attracted widespread interest due to the outstanding physicochemical and biological properties. Since the first report on polydopamine (PDA) films, great efforts have been devoted to develop new fabrication strategies for obtaining novel nanostructures and desirable properties. Among them, one-pot co-assembly strategy offers a unique pathway for integrating multiple properties and functions into dopamine-based platform in a single simultaneous co-deposition step. This review focuses on the state of the art development of one-pot multicomponent self-assembly of dopamine-based materials and summarizes various single-step co-deposition approaches, including PDA-assisted adaptive encapsulation, co-assembly of dopamine with other molecules through non-covalent interactions or covalent interactions. Moreover, emerging applications of dopamine-based materials in the fields ranging from sensing, cancer therapy, catalysis, oil/water separation to antifouling are outlined. In addition, some critical remaining challenges and opportunities are discussed to pave the way towards the rational design and applications of dopamine-based materials.

Stabilizing Hard Magnetic SmCo5 Nanoparticles by N-Doped Graphitic Carbon Layer

We report a chemical method to synthesize size-controllable SmCo₅ nanoparticles (NPs) and to stabilize the NPs against air oxidation by coating a layer of N-doped graphitic carbon (NGC). First 10 nm CoO and 5 nm Sm₂O₃ NPs were synthesized and aggregated in reverse micelles of oleylamine to form SmCo-oxide NPs with a controlled size (110, 150, or 200 nm). The SmCo-O NPs were then coated with polydopamine and thermally annealed to form SmCo-O/NGC NPs, which were further embedded in CaO matrix and reduced with Ca at 850 °C to give SmCo₅/NGC NPs of 80, 120, or 180 nm, respectively. The 10 nm NGC coating efficiently stabilized the SmCo₅ NPs against air oxidation at room temperature or at 100 °C. The magnetization value of the 180 nm SmCo₅/NGC NPs was stabilized at 86.1 emu/g 5 days after air exposure at room temperature and dropped only 1.7% 48 h after air exposure at 100 °C. The stable SmCo₅/NGC NPs were aligned magnetically in an epoxy resin, showing a square-like hysteresis behavior with their H_c reaching 51.1 kOe at 150 K and 21.9 kOe at 330 K and their M_r stabilized at around 84.8 emu/g. Our study demonstrates a new strategy for synthesizing and stabilizing SmCo₅ NPs for high-performance nanomagnet applications in a broad temperature range.

Strong pyrrolic-N-Pd interactions boost the electrocatalytic hydrodechlorination reaction on palladium nanoparticles

We demonstrated that heteroatomic nitrogen (N) doping of graphene can significantly enhance the performance of the graphene-palladium nanoparticle composite catalyst (N/G-Pd) in the electrocatalytic hydrodechlorination (EHDC) reaction. Specifically at -0.80 V (vs. Ag/AgCl), the N/G-430-Pd (prepared at 430 °C, pyridinic/pyrrolic-N-rich) and N/G-900-Pd (prepared at 900 °C, pyridinic/graphitic-N-rich) with equivalent total N content delivered the apparent rate constants (kobs) of 0.28 and 0.20 min-1 molPd-1 in removing 2,4-dichlorophenol, much higher than the 0.13 min-1 molPd-1 of the C-Pd. Additionally, we identified the determinant role of pyrrolic-N in boosting EHDC from the linear relationship between kobs-N and the pyrrolic-N content in the catalyst. Combined experimental and DFT analyses revealed that the positive effect of N doping originated from the strong N-Pd interactions, which modulated the Pd electronic structure and its interactions with the reactant and EHDC products (phenol and Cl-). The pyrrolic N-Pd bond was favorable as it could balance the reactant adsorption and the product desorption.

Trace determination and characterization of ginsenosides in rat plasma through magnetic dispersive solid-phase extraction based on core-shell polydopamine-coated magnetic nanoparticles

Enrichment of trace bioactive constituents and metabolites from complex biological samples is challenging. This study presented a one-pot synthesis of magnetic polydopamine nanoparticles (Fe₃O₄@SiO₂@PDA NPs) with multiple recognition sites for the magnetic dispersive solid-phase extraction (MDSPE) of ginsenosides from rat plasma treated with white ginseng. The extracted ginsenosides were characterized by combining an ultra-high-performance liquid chromatography coupled to a high-resolution mass spectrometry with supplemental UNIFI libraries. Response surface methodology was statistically used to optimize the extraction procedure of the ginsenosides. The reusability of Fe₃O₄@SiO₂@PDA NPs was also examined and the results showed that the recovery rate exceeded 80% after recycling 6 times. Furthermore, the proposed method showed greater enrichment efficiency and could rapidly determine and characterize 23 ginsenoside prototypes and metabolites from plasma. In comparison, conventional methanol method can only detect 8 ginsenosides from the same plasma samples. The proposed approach can provide methodological reference for the trace determination and characterization of different bioactive ingredients and metabolites of traditional Chinese medicines and food.

•

The Fe₃O₄@SiO₂@PDA NPs were synthesized through one-pot method.

•

The RSM was designed to promote the extraction of trace active ingredients.

•

The MDSPE, UPLC-MS and UNIFI software were integrated into an analytical platform.

•

The synergetic strategy was applied to enrich ginsenosides from rat plasma.

•

The synergetic strategy provided an easy, rapid and sensitive method for analytes.

Carboxyethyltin and transition metal co-functionalized tungstoantimonates composited with polypyrrole for enhanced electrocatalytic methanol oxidation

Carboxyethyltin and first-row transition metals (TMs) were firstly introduced into trivacant Keggin-type tungstoantimonate in an aqueous solution, leading to the formation of four crystalline organic-inorganic hybrid sandwich-type polyoxometalates (POMs), formulated as Na10-x-yKyHx[((TM)(H2O)3)2(Sn(CH2)2COO)2(SbW9O33)2]·nH2O (SbW9-TM-SnR, TM = Mn, Co, Ni, Zn; x = 1, 1, 0, 0; y = 0, 5, 5, 2; n = 18, 24, 24, 22, respectively). SbW9-TM-SnR exhibit high catalytic ability for the oxidation of cyclohexanol. Meanwhile, SbW9-TM-SnR were composited with polypyrrole (PPy) through an electropolymerization process, forming PPy-SbW9-TM-SnR, on which platinum (Pt) was further electro-deposited to prepare PPy-SbW9-TM-SnR/Pt for electrocatalytic methanol (CH3OH) oxidation in acid solution. The composition and morphology of PPy-SbW9-TM-SnR/Pt were determined by IR, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The electrochemical experimental results show that SbW9-TM-SnR and PPy obviously enhance the electrocatalytic and anti-intoxication abilities of Pt, and the highest peak current density of 0.87 mA cm-2, corresponding to 1.85 and 1.43 times higher than those of pure Pt and PPy/Pt electrodes respectively, is acquired for the PPy-SbW9-Ni-SnR/Pt composite electrode. These findings may enlarge the application of PPy and POMs in the electrocatalytic field.

Recent progress in Pt and Pd-based hybrid nanocatalysts for methanol electrooxidation

Hybrid nanomaterials can combine merits of different components and modulate electronic states of Pt and Pd based nanocrystals simultaneously.

Selective Etching Induced Synthesis of Hollow Rh Nanospheres Electrocatalyst for Alcohol Oxidation Reactions

The hollow noble metal nanostructures have attracted wide attention in catalysis/electrocatalysis. Here a two-step procedure for constructing hollow Rh nanospheres (Rh H-NSs) with clean surface is described. By selectively removing the surfactant and Au core of Au-core@Rh-shell nanostructures (Au@Rh NSs), the surface-cleaned Rh H-NSs are obtained, which contain abundant porous channels and large specific surface area. The as-prepared Rh H-NSs exhibit enhanced inherent activity for the methanol oxidation reaction (MOR) compared to state-of-the-art Pt nanoparticles in alkaline media. Further electrochemical experiments show that Rh H-NSs also have high activity for the electrooxidation of formaldehyde and formate (intermediate species in the course of the MOR) in alkaline media. Unfortunately, Rh H-NSs have low electrocatalytic activity for the ethanol and 1-propanol oxidation reactions in alkaline media. All electrochemical results indicate that the order of electrocatalytic activity of Rh H-NSs for alcohol oxidation reaction is methanol (C1 ) > ethanol (C2 ) > 1-propanol (C3 ). This work highlights the synthesis route of Rh hollow nanostructures, and indicates the promising application of Rh nanostructures in alkaline direct methanol fuel cells.

3D self-assembly of ultrafine molybdenum carbide confined in N-doped carbon nanosheets for efficient hydrogen production

Electrochemical water splitting has been intensively pursued as a promising approach to produce clean and sustainable hydrogen fuel. However, the lack of low-cost and high-performance electrocatalysts for the hydrogen evolution reaction (HER) hinders the large-scale application. Herein, we have rationally designed and synthesized 3D self-assembly architectures assembled from ultrafine MoC nanoparticles (0D) uniformly embedded within N-doped carbon nanosheets (2D) for the HER via a simple protocol. The well-organized 3D nanostructures are composed of very small MoC nanocrystallites (<2 nm) and free-stretching conductive carbon nanosheets with high specific surface areas and abundant mesopores, which can expose more active sites and facilitate electron/ion transport pathways. Based on the merits of the composition and configuration, the resultant hierarchical 3D self-assembly architectures exhibit remarkable electrocatalytic performance and stability for the HER.

Facile preparation of fluffy N-doped carbon modified with Ag nanoparticles as a highly active and reusable catalyst for catalytic reduction of nitroarenes

Novel fluffy smoke like mesoporous N-doped carbon (mNC) was prepared through a facile one-pot carbonization method using the low-cost melamine and polyacrylonitrile as the precursor materials. The obtained mNC material exhibits a high surface area, rich nitrogen content and can be used as an ideal catalyst support to fabricate noble metal modified nanocatalysts. Here, small Ag nanoparticles were supported on the mNC material with high dispersion to give the Ag/mNC nanocatalyst. The obtained Ag/mNC nanocatalyst was used in the catalytic reduction of nitroarenes and showed excellent catalytic activity, probably due to the small Ag NPs which highly dispersed on the fluffy mNC material that can enhance the accessibility and mass transfer, and subsequently enhance the catalytic activity. It is worth mentioning that, in the catalytic reduction of nitroarenes with halogenated groups, almost no dehalogenation phenomenon can be observed, which implies the superior catalytic chemoselectivity of the Ag/mNC nanocatalyst.