Melamine-Based Metal-Chelating Porous Organic Polymers for Efficient CO2 Capture and Conversion

Pyrolysis Free Out-of-Plane Co-Single Atomic Sites in Porous Organic Photopolymer Stimulates Solar-Powered CO2 Fixation

Herein, a facile strategy is illustrated to develop pyrolysis-free out-of-plane coordinated single atomic sites-based M-POP via a one-pot Friedel Craft acylation route followed by a post-synthetic metalation. The optimized geometry of the Co@BiPy-POP clearly reveals the presence of out-of-plane Co-single atomic sites in the porous backbone. This novel photopolymer Co@BiPy-POP shows extensive π-conjugations followed by impressive light harvesting ability and is utilized for photochemical CO2 fixation to value-added chemicals. A remarkable conversion of styrene epoxide (STE) to styrene carbonate (STC) (≈98%) is obtained under optimized photocatalytic conditions in the existence of promoter tert-butyl ammonium bromide (TBAB). Synchrotron-based X-ray adsorption spectroscopy (XAS) analysis reveals the single atom coordination sites along with the metal (Co) oxidation number of +2.16 in the porous network. Moreover, in situ diffuse reflectance spectroscopy (DRIFTS) and electron paramagnetic resonance (EPR) investigations provide valuable information on the evolution of key reaction intermediates. Comprehensivecomputational analysis also helps to understand the overall mechanistic pathway along with the interaction between the photocatalyst and reactants. Overall, this study presents a new concept of fabricating porous photopolymers based on a pyrolysis-free out-of-plane-coordination strategy and further explores the role of single atomic sites in carrying out feasible CO2 fixation reactions.

Capture of CO2 by Melamine Derivatives: A DFT Study Combining the Relative Energy Gradient Method with an Interaction Energy Partitioning Scheme

A theoretical study of the interaction between melamine and CO2 was carried out using density functional theory (DFT) with the B3LYP-D3(BJ)/aug-cc-pVTZ level of theory. The presence of anions interacting with melamine transforms the weakly bonded tetrel complexes into adducts. Thus, melamine acts as an FLP (frustrated Lewis pair) with acid groups (NHs as hydrogen bond donors) and a base group (N of the triazine ring). The application of the relative energy gradient formalism (REG) along the reaction coordinate has demonstrated that the ability of the melamine-anion systems to capture CO2 is linked to its capacity to polarize the CO2 molecule. These results have been confirmed by placing the melamine:CO2 complex in a uniform electric field with different strengths.

Synthesis and Characterization of Bipyridine-Based Polyaminal Network for CO2 Capture

The response to the high demand for decreasing the amount of CO₂ in the atmosphere, a new polyaminal-based polymer network was designed and successfully prepared through one-pot polycondensation reaction of melamine and [2,2′-Bipyridine]-5,5′-dicarbaldehyde. The formation of the polymer structure was confirmed by FT-IR, solid-state ¹³C NMR, and powder-X-ray diffraction. The porous properties of the polymeric structure were confirmed by field-emission scanning electron microscope and N₂ adsorption–desorption methods at 77 K. The prepared polymer can take up 1.02 mmol/g and 0.71 mmol/g CO₂ at 273 K and 298 K, respectively, despite its relatively modest Brunauer–Emmett–Teller (BET) surface area (160.7 m²/g), due to the existence of superabundant polar groups on the pore surfaces.

Synthesis of Naphthalene-Based Polyaminal-Linked Porous Polymers for Highly Effective Uptake of CO2 and Heavy Metals

Studying the effect of functional groups on the porosity structure and adsorption efficiency of polymer materials is becoming increasingly interesting. In this work, a novel porous polyaminal-linked polymer, based on naphthalene and melamine (PAN-NA) building blocks, was successfully synthesized by a one-pot polycondensation method, and used as an adsorbent for both CO2 and heavy metals. Fourier transform infrared spectroscopy, solid-state 13 C NMR, powder X-ray diffraction, and thermogravimetry were used to characterize the prepared polymer. The porous material structure was established by field-emission scanning electron microscope and N2 adsorption-desorption methods at 77 K. The polymer exhibited excellent uptake of CO2, 133 mg/g at 273 K and 1 bar. In addition, the adsorption behavior of PAN-NA for different metal cations, including Pb(II), Cr(III), Cu(II), Cd(II), Ni(II), and Ba(II), was investigated; a significant adsorption selectivity toward the Pb(II) cation was detected. The influence of pH, adsorbent dose, initial concentrations, and contact time was also assessed. Our results prove that the introduction of naphthalene in the polymer network improves the porosity and, thus, CO2 adsorption, as well as the adsorption of heavy metals.

Enhancement in the active site exposure in a porphyrin-based PIL/graphene composite catalyst for the highly efficient conversion of CO2

Poly(ionic liquid)s (PILs) have gained widespread attention in recent years due to their excellent properties similar to both ionic liquids and polymers. However, their further applications are limited because abundant and flexible ions easily block nanopores in the PIL catalysts, thus blocking the active sites and ultimately leading to decreased catalytic activity. This work reports the synthesis of a PIL/graphene composite catalyst (iPOP-ZnTPy@GNFs) based on an in situ surface preparation strategy, which effectively controlled the particle size and dispersion state of ionic liquids. The iPOP-ZnTPy@GNFs exhibited a larger surface area and more exposed active sites, which intensified the catalytic activity in the CO₂ cycloaddition reaction with propylene oxide with almost double the reaction rate as compared to that of iPOP-ZnTPy-2 at 100 °C and S/C = 1000. As expected, the iPOP-ZnTPy@GNF catalyst efficiently converted epoxides to cyclic carbonates at room temperature or atmospheric pressure, which can significantly reduce the process cost. In addition, iPOP-ZnTPy@GNFs exhibited excellent broad substrate scope, catalytic diversity, and remarkable reusability. The reaction mechanism of CO₂ cycloaddition was studied via density functional theory calculations and was validated by experimental findings. This work provides a feasible method for improving the utilization of active sites in PILs as a highly robust catalyst for CO₂ cycloaddition and can be further extended to other types of catalytic reactions in practical applications.

Metal-assisted synthesis of salen-based porous organic polymer for highly efficient fixation of CO2 into cyclic carbonates

A series of metal–salen-based porous organic polymers was synthesized using a simple metal-assisted synthetic method, among which Co-salen-POP exhibited highly efficient performance in the fixation of CO2 into cyclic carbonates.

Conversion of CO2 into Chloropropene Carbonate Catalyzed by Iron (II) Phthalocyanine Hypercrosslinked Porous Organic Polymer

Commercial iron (II) phthalocyanine (FePc) was knitted with biphenyl using a Friedel-Crafts reaction to yield a micro-meso porous organic polymer (FePc-POP) with a specific surface area of 427 m²/g and 5.42% of iron loading. This strategy allowed for the direct synthesis of a heterogeneous catalyst from an iron containing monomer. The catalytic system, formed by the knitted polymer containing FePc and DMAP (4-dimethylamino pyridine) as base, results in an efficient heterogeneous catalyst in the cycloaddition of CO₂ to epichlorohydrin to selectively obtain the corresponding cyclic carbonate. Thus, a TON (mmol substrate converted/mmol catalysts used) value of 2700 was reached in 3 h under mild reaction conditions (solvent free, 90 °C, 3 bar of CO₂). The catalyst does not exhibit leaching during the reactions, which was attributed to the excellent stability of the metal in the macrocycle.

Emerging trends in porous materials for CO2 capture and conversion

This review highlights the recent progress in porous materials (MOFs, zeolites, POPs, nanoporous carbons, and mesoporous materials) for CO₂ capture and conversion.