Composition and oxidative stability of oil from Salvia hispanica L. seeds in relation to extraction method

Extraction of mucilage polysaccharides from chia seed by hydrophobic deep eutectic solvents-based three-phase partitioning system: A phase behavior-driven approach

By incorporating the hydrophobic deep eutectic solvents (DESs) into the three-phase partitioning (TPP) technique, a TPP-based method was developed to extract the chia seed polysaccharide (CSP) from chia seed. Through a single-factor experiment and response-surface model, the optimal condition for the TPP extraction was determined as DES composed of dodecanoic acid and octanoic acid in a 1:1 M ratio, (NH4)2SO4 concentration of 32.86 %, crude extract-DES ratio of 0.93 (v/v), aqueous phase pH of 4.38, extraction temperature of 35 °C, and extraction time of 10 min. The polysaccharide yield of the constructed TPP method is 8.65 %, which is higher than the conventional water extraction method (yield is 6.96 %). Molecular dynamics simulations reveal the phase behavior of proteins and polysaccharides in the TPP system, showing that noncovalent interactions play a crucial role in the TPP system. The CSP obtained by the TPP method exhibits distinctive composition, structural, physicochemical, and functional properties, leading to improved thermal stability, rheological behavior, and antioxidant performance. Compared with the traditional extraction method, efficient extraction of CSP can be achieved flexibly using the proposed TPP approach, resulting in high yield and quality of CSP, which provides a new path for the large-scale utilization of chia seed.

Repurposing chia seed oil: A versatile novel functional food

Chia seed oil (CSO) has been recently gaining tremendous interest as a functional food. The oil is rich in with polyunsaturated fatty acids (PUFAs), especially, alpha linolenic acid (ALA), linoleic acid (LA), tocopherols, phenolic acids, vitamins, and antioxidants. Extracting CSO through green technologies has been highly efficient, cost-effective, and sustainable, which has also shown to improve its nutritional potential and proved to be eco-friendly than any other traditional or conventional processes. Due to the presence of valuable bioactive metabolites, CSO is proving to be a revolutionary source for food, baking, dairy, pharmaceutical, livestock feed, and cosmetic industries. CSO has been reported to possess antidiabetic, anticancer, anti-inflammatory, antiobesity, antioxidant, antihyperlipidemic, insect-repellent, and skin-healing properties. However, studies on toxicological safety and commercial potency of CSO are limited and therefore the need of the hour is to focus on large-scale molecular mechanistic and clinical studies, which may throw light on the possible translational opportunities of CSO to be utilized to its complete potential. In this review, we have deliberated on the untapped therapeutical possibilities and novel findings about this functional food, its biochemical composition, extraction methods, nutritional profiling, oil stability, and nutraceutical and pharmaceutical applications for its health benefits and ability to counter various diseases.

Quantifying Cardinal Temperatures of Chia (Salvia hispanica L.) Using Non-Linear Regression Models

Temperature is the main factor that impacts germination and therefore the success of annual crops, such as chia (Salvia hispanica L.), whose seeds are known for their high nutritional value related to its oil. The effect of temperature on germination is related to cardinal-temperature concepts that describe the range of temperature over which seeds of a particular species can germinate. Therefore, in this study, in addition to calculated germinative parameters such as total germination and germination rate of S. hispanica seeds, the effectiveness of non-linear models for estimating the cardinal temperatures of chia seeds was also determined. We observed that germination of S. hispanica occurred in cold to moderate-high temperatures (10-35 °C), having an optimal range between 25 and 35 °C, with the highest GR and t₅₀ at 30 °C. Temperatures higher than 35 °C significantly reduced germination. Output parameters of the different non-linear models showed that the response of chia germination to temperature was best explained by beta models (B). Cardinal temperatures calculated by the B1 model for chia germination were: 2.52 ± 6.82 °C for the base, 30.45 ± 0.32 °C for the optimum, and 48.58 ± 2.93 °C for the ceiling temperature.

Nanoliposomes and Nanoemulsions Based on Chia Seed Lipids: Preparation and Characterization

Polyunsaturated fatty acids (PUFA) are important in reducing the risk for cardiovascular, metabolic and neurodegenerative diseases. Chia (Salvia hispanica L.) seeds contain high levels of omega-3 PUFA, α-linolenic acid (ALA) in particular, and are a potential source for development of omega-3 PUFA-based products. Our objective was to obtain and characterize chia seed lipids, focusing on phospholipid fraction, and to investigate their use in the formulation of nanoemulsions (NE) and nanoliposomes (NL). Solvent-based lipid extraction was performed on the ORURO variety of chia seeds, followed by lipid composition analysis using GC and LC-MS and physico-chemical characterization of chia NL and NE. Folch extraction led to a slightly higher yield of ALA as compared to Soxhlet extraction. Lipid, phospholipid, and fatty acid composition analysis of the oil and residue revealed that the residue was rich in phospholipids; these were used to prepare NE and NL. Physico-chemical characterization showed that NE and NL were generally spherical (transmission electron microscopy), with a size of <120 nm under hydrated conditions that remained stable over 5 days. In conclusion, chia oil and phospholipid-rich residue can be used to obtain stable NL or NE using a simple method that involves spontaneous emulsification during lipid hydration, which potentially may be useful in cosmetics, pharmaceutical, and other health applications.

Nutritional quality and phytochemical contents of cold pressed oil obtained from chia, milk thistle, nigella, and white and black poppy seeds

Cold pressed oils obtained from chia (Salvia hispanica L.), milk thistle (Silybum marianum L.), nigella (Nigella sativa L.), and white and black varieties of poppy (Papaver somniferum L.) seeds were character­ized. The nutritional quality was determined based on the analysis of fatty acids, tocochromanol and phytos­terol contents, as well as antioxidant activity and general physico-chemical properties. Among the oils analyzed the fatty acid composition most beneficial for health was found in chia seed oil, with 65.62% of α-linolenic acid and the n-6:n-3 fatty acid ratio of 1:3.5. Other oils studied were rich sources of linoleic acid (18.35-74.70%). Chia seed oil was also distinguished by high contents of phytosterols, mainly β-sitosterol (2160.17 mg/kg oil). The highest content of tocochromanols was found in milk thistle oil with dominant α-tocopherol (530.2 mg/kg oil). In contrast, the highest antioxidant activity was recorded for nigella oil (10.23 μM Trolox/g), which indi­cated that, in addition to tocopherols, other antioxidants influenced its antioxidant potential.

Appraisal of the suitability of two-stage extraction process by combining compressed fluid technologies of polar lipid fractions from chia seed

Although triacylglycerols (TAG) are the major constituents of chia oil, it also contains minor lipid fractions that include phospholipids (PL) among other desirable components. Its amphiphilic character and excellent biocompatibility make PL appropriate for numerous applications with technological and nutritional significanceand potential health benefits. Given the difficulties entailed by the PL isolation, the efficiency for extracting such compounds using two environmental friendly techniques, pressurized liquid extraction (PLE) and supercritical fluid extraction (SFE) was evaluated. By using PLE with food-grade ethanol (EtOH), an oil recovery close to 100% was achieved in just 10 min. This oil extract was particularly rich in α-linolenic acid (ALA; 70%) as compared to the oil extracted by SFE (56%). In the case of SFE, the oil recovery was only 87% but increased to 99% when ethanol was added to CO₂. However the use of co-solvent did not affect the fatty acid profile of the supercritical extracts or their TAG composition, where the high molecular weight TAG species were the predominant in all cases. With the exception of SFE without co-solvent, all methods applied were capable of extracting the PL fraction, although the content and distribution of the individual components present in this fraction differed markedly depending on the extraction conditions used. In this context, the use of a sequential extraction process, combining SFE and PLE was particularly interesting. The re-extraction by PLE of the chia cake, previously defatted by SFE, allowed to obtain an oil extract highly enriched in PLs, whose content exceeded 16% and with a higher PL species than the rest of the oil extracts.

Extraction Technology Can Impose Influences on Peanut Oil Functional Quality: A Study to Investigate the Lipid Metabolism by Sprague-Dawley Rat Model

In this study, peanut oil was prepared by cold pressing (temperature under 60 °C), hot pressing (temperature above 105 °C), and enzyme-assisted aqueous extraction technology. Influences of an extraction technology on the oil fatty acid composition and the content of minor bioactive compounds, including tocopherols, polyphenols, and squalene, were investigated in detail. High-fat-diet Sprague-Dawley (SD) rat model was then established to probe the impact of cold-pressed peanut oil (CPO), hot-pressed peanut oil (HPO), and enzyme-assisted aqueous-extracted peanut oil (EAO) on lipid metabolism outcomes, to explore influences of different extraction technologies on lipid functional quality. Results showed that oleic acid was the predominate fatty acid in the EAO (52.57 ± 0.11%), which was also significantly higher (P < 0.05) than CPO and HPO. The HPO showed higher total tocopherol and polyphenol contents (206.84 ± 6.93 mg/kg and 47.87 ± 6.50 mg GA/kg, respectively) than CPO and EAO (P < 0.05). However, the squalene content in CPO was 475.47 ± 12.75 mg/kg, which was the highest among the three oils (P < 0.05). The animal experiment results revealed that EAO could be more prone to induce lipid accumulation in the liver, which may likely to cause nonalcoholic fatty liver disease. However, the serum lipid profiles indicated that the CPO was more beneficial than the EAO and HPO in lowering the serum low-density lipoprotein cholesterol, alanine aminotransferase, and aspartate aminotransferase contents, and increasing the high-density lipoprotein cholesterol content. All of our efforts indicated that an extraction technology can affect the peanut oil lipid fatty acid composition, the bioactive compounds content, and, correspondingly, the lipid metabolism in SD rats.

Production of omega 3-rich oils from underutilized chia seeds. Comparison between supercritical fluid and pressurized liquid extraction methods

Chia seeds constitute a promising source of α-linolenic acid (ALA). In the present work, an underutilized and cheaper set of chia seeds, which were discarded after the harvest according to quality criteria - named in this work as low oil content seeds (LOCS) - have been evaluated as a potential source for obtaining PUFA-enriched oils against the commonly studied high-quality chia seeds denoted as high oil content seeds (HOCS) in this study. Two efficient and environmental friendly techniques, supercritical fluid extraction (SFE) and pressurized liquid extraction (PLE), were evaluated to optimize the extraction process of chia oil. At 60 °C, by using pressurized food-grade ethanol, recoveries close to 100% were achieved from both sets of seeds in a short extraction time (10 min). By using SFE, the greatest oil extraction yield (>95%) was attained at the highest pressure and temperature conditions (45 MPa and 60 °C) after 240 min. At the early stage of SFE extraction, both LOCS and HOCS exhibited a similar kinetic behavior, reaching oil extraction rates of 0.59 g oil/min and 0.64 g oil/min, respectively. No differences were found between the fatty acid profile of the oils extracted from LOCS and HOCS both by PLE and SFE. ALA and linoleic acid (LA) concentrations ranged between 65-68% and 17-23% respectively, and a predominance of high molecular weight triglycerides (≥ CN50), was found in all extracted oils. In conclusion, LOCS might constitute a new suitable raw material for the production of ALA-enriched oils. Concerning the extraction methods assayed, the oil was almost entirely recovered by both PLE and SFE at the used conditions.

Supercritical CO2 extraction in chia oils production: impact of process duration and co-solvent addition

This study was conducted to show impact of supercritical fluid extraction using pure SC-CO₂ or SC-CO₂ enriched by 2, 6, and 10% of acetone, simultaneously varied by the extraction time (1 vs. 5 h), on the quality of chia seed oils. Obtained oils were relatively similar in the fatty acid composition, but they differed in total content of phytochemicals (from 4956 to 6391 mg/kg of oil). Among them, three oils were the most different: oil extracted 1 h with pure SC-CO₂ (the most abundant in squalene, sterols, and tocopherols), oil extracted 5 h with pure SC-CO₂ (the poorest in squalene, polyphenols, and carotenoids, with medium level of sterols and tocopherols) and oil extracted 1 h with SC-CO₂ enriched by 10% acetone (the most abundant in polyphenols and carotenoids). Such unique chia oils can be valuable for special market needs, such as cosmetics, pharmaceuticals, functional food or diet supplement production.