Development of a New Voltammetric Methodology for the Determination of Ciprofloxacin in Beef Samples Using a Carbon Paste Electrode Modified with Nafion and Fullerenes

Rapid UV-Vis spectrophotometric method aided by firefly-PLS models for the simultaneous quantification of ciprofloxacin, lomefloxacin, and enrofloxacin in their laboratory mixture, dosage forms and water samples: greenness and blueness assessment

Herein, a novel UV spectrophotometric method coupled with chemometric tools was developed for the simultaneous determination of three fluoroquinolone antibiotics: ciprofloxacin, lomefloxacin, and enrofloxacin. Such integration of UV spectroscopy and chemometric analysis proved to be a simple, rapid, and cost-effective approach for the quantification of these clinically important pharmaceutical compounds and aid in their quality control analysis. The method employed firefly algorithm for variable selection and partial least squares (PLS) regression for model calibration. The developed method was validated by independent test set in addition the accuracy, intra and inter-day precision as per ICH guidelines which showed a satisfactory performance with mean recovery ranged between 98.18 and 101.83 with %RSD < 2. Besides, the developed method displayed ultrasensitive levels with LODs (0.0803, 0.1125, 0.1309 µg/mL) and LOQs (0.2434, 0.3409, 0.3968 µg/mL) for ciprofloxacin, lomefloxacin, and enrofloxacin, respectively. The greenness and blueness of the developed method were also evaluated using the recently proposed Analytical GREEnness metric approach (AGREE) and Blue applicability grade index (BAGI) tools, which showed a high AGREE score of 0.79 and a BAGI score of 77.5. These results indicate that the developed method provides an environmentally friendly alternative to the traditionally used chromatographic techniques, while maintaining high analytical practicability. Finally, the application of the developed methodology was demonstrated on real pharmaceutical and tap water samples, and the results were in good agreement with those obtained by the reference HPLC method indicating the reliability and suitability of the proposed spectrophotometric method for routine analysis of fluoroquinolone antibiotics.

Electrochemical Sensor Based on the Hierarchical Carbon Nanocomposite for Highly Sensitive Ciprofloxacin Determination

A new voltammetry method for the highly sensitive antibacterial drug ciprofloxacin (CIP) is presented using glassy carbon electrodes modified with hierarchical electrospun carbon nanofibers with NiCo nanoparticles (eCNF/CNT/NiCo-GCE). The use of a modified glassy carbon electrode in the form of hierarchical electrospun carbon nanofibers with NiCo nanoparticles (eCNF/CNT/NiCo) led to an LOD value as low as 6.0 µmol L-1 with a measurement sensitivity of 3.33 µA µmol L-1. The described procedure was successfully applied for CIP determination in samples with complex matrices, such as urine or plasma, and also in pharmaceutical products and antibiotic discs with satisfactory recovery values ranging between 94-104%. The proposed electrode was characterised by great stability, with the possibility of use for about 4 weeks without any significant change in the CIP peak current. The repeatability of the CIP response on the eCNF/CNT/NiCo/GC is also very good; its value measured and expressed as RSD is equal to 2.4% for a CIP concentration of 0.025 µmol L-1 (for 7 consecutive CIP voltammogram registrations). The procedure for electrode preparation is quick and simple and does not involve the use of expensive apparatus.

Cost-effective protocol to produce 3D-printed electrochemical devices using a 3D pen and lab-made filaments to ciprofloxacin sensing

A novel conductive filament based on graphite (Gr) dispersed in polylactic acid polymer matrix (PLA) is described to produce 3D-electrochemical devices (Gr/PLA). This conductive filament was used to additively manufacture electrochemical sensors using the 3D pen. Thermogravimetric analysis confirmed that Gr was successfully incorporated into PLA, achieving a composite material (40:60% w/w, Gr and PLA, respectively), while Raman and scanning electron microscopy revealed the presence of defects and a high porosity on the electrode surface, which contributes to improved electrochemical performance. The 3D-printed Gr/PLA electrode provided a more favorable charge transfer (335 Ω) than the conventional glassy carbon (1277 Ω) and 3D-printed Proto-pasta® (3750 Ω) electrodes. As a proof of concept, the ciprofloxacin antibiotic, a species of multiple interest, was selected as a model molecule. Thus, a square wave voltammetry (SWV) method was proposed in the potential range + 0.9 to + 1.3 V (vs Ag|AgCl|KCl_(sat)), which provided a wide linear working range (2 to 32 µmol L^-1), 1.79 µmol L^-1 limit of detection (LOD), suitable precision (RSD < 7.9%), and recovery values from 94 to 109% when applied to pharmaceutical and milk samples. Additionally, the sensor is free from the interference of other antibiotics routinely employed in veterinary practices. This device is disposable, cost-effective, feasibly produced in financially limited laboratories, and consequently promising for evaluation of other antibiotic species in routine applications.

Innovative electrochemical electrode modified with Al2O3 nanoparticle decorated MWCNTs for ultra-trace determination of tamsulosin and solifenacin in human plasma and urine samples and their pharmaceutical dosage form

A simple, cheap, sensitive, and time-saving square wave voltammetric (SWV) procedure using a carbon paste electrode modified with aluminum oxide nanoparticle decorated multi-walled carbon nanoparticles (Al2O3-NPs/MWCNTs/CPE) is presented for the ultra-sensitive determination of tamsulosin (TAM) and solifenacin (SOL), one of the most prescribed pharmaceutical combinations in urology. Characterization of the developed electrode was performed using scanning electron microscopy (SEM), X-ray diffraction (XRD) patterns, energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM) and FT-IR spectrophotometry. The voltammetric behavior of TAM/SOL was evaluated using Al2O3-NPs in different content and electrode compositions. The use of Al2O3 functionalized MWCNTs as a CPE modifier increased the process of electron transfer as well as improved the electrode active surface area therefore, ultra-sensitive results were acquired with a linear range of 10-100 and 12-125 ng ml-1 for TAM and SOL respectively, and a limit of the detection value of 2.69 and 3.25 ng ml-1 for TAM and SOL, respectively. Interestingly, the proposed method succeeded in quantifying TAM and SOL with acceptable percentage recoveries in dosage forms having diverged concentration ranges and in the biological fluids with very low peak plasma concentration (C max). Furthermore, the proposed method was validated, according to the ICH criteria, and shown to be accurate and reproducible.