Separation and quantification of double- and triple-layered rotavirus-like particles by CZE

Self-assembling Rotavirus VP6 Nanoparticle Vaccines Expressed in Escherichia coli Elicit Systemic and Mucosal Responses in Mice

Background:

Rotavirus is the most common cause of infectious diarrhea in infants and young children around the world. The inner capsid protein VP6 has been discussed as alternative vaccine as it can induce cross-protective immune responses against different RV strai. The use of ferritin nanoparticle may enhance the immunogenicity of the subunit vaccine.

Objective:

In this article, our motivation is to design and obtain a self-assemble rotavirus nanoparticle vaccine which can induce efficiency immune response.

Methods:

The VP6 protein was fused with ferritin and expressed in the Escherichia coli expression system. The recombinant VP6-ferritin (rVP6-ferritin) protein was purified by His-tag affinity chromatography and fast protein liquid chromatography. Transmission electron micrographic analysis was used to detect the nanostructure of the self-assembled protein. Mice were gavage with the protein and ELISA was used to detect the titer of the VP6 specific antibody.

Results:

The recombined VP6-ferritin was expressed in the Escherichia coli as an inclusion body form and the purified protein has similar antigenicity to rotavirus VP6. Transmission electron micrographic analysis of rVP6-ferritin exhibited spherical architecture with a uniform size distribution, which is similar to the ferritin nanocage. Immune response analysis showed that mice immunized by rVP6-ferritin protein induced 8000 (8000±1093) anti-VP6 IgG titers or 1152 (1152±248.8) anti-VP6 IgA titers.

Conclusion:

According to the above research, the rotavirus VP6-ferritin protein can be easily express and self-assemble to the nano-vaccine and induce efficiency humoral and mucosal immunity. Our research makes a foundation for the development of oral rotavirus vaccine.

Incorporation of ORF2 from Porcine Circovirus Type 2(PCV2) into genetically encoded nanoparticles as a novel vaccine using a self-aggregating peptide

Porcine Circovirus Type 2 (PCV2) is one of the most important pathogens in pigs around the world. PCV2 is a non-enveloped virus and its capsid is formed by a single protein known as open reading frame 2 (ORF2). The aim of this study was to evaluate the antigenicity and immunogenicity of genetically-encoded protein nanoparticles (NPs) containing ORF2 from PCV2 fused to the first 110 amino acids of the N-terminus of polyhedrin from the insect virus Autographa californica nucleopolyhedrovirus (PH(1 -1 1 0)). Our group has previously described that some polyhedrin fragments self-aggregate forming polyhedra-like particles. We identified a self-aggregating signal within the first 110 amino acids from polyhedrin (PH(1 -1 1 0)). Fusing the ORF2 from PCV2 to the carboxyl terminus from PH(1 -1 1 0) results in the formation of NPs which incorporate the antigen of interest. Using this system we synthesized NPs containing PH(1 -1 1 0) fused to ORF2 (PH(1 -1 1 0)PCV2) and purify them to immunize pigs and evaluate the humoral immune response generated by these NPs comparing them to a commercially available vaccine. Pigs immunized with PH(1 -1 1 0)PCV2 NPs produced antibodies against ORF2 from PCV2 as indicated by western blot and ELISA analysis. Antibodies obtained with PH(1 -1 1 0)PCV2 NPs were comparable to those obtained using a commercial PCV2 vaccine. These antibodies neutralized the infection of a recombinant PCV2 expressing the green fluorescent protein (GFP). These results together suggest that the self-aggregating peptide PH(1 -1 1 0) can be used for the synthesis of subunit vaccines against PCV2.

Quantitation and biospecific identification of virus-like particles of human papillomavirus by capillary electrophoresis

Capillary electrophoresis (CE) for HPV-VLP quantitation is a very interesting alternative technique compared to those currently used in viral analysis, such as SDS-PAGE, Western blot or protein assay that are destructive and semi-quantitative or non specific. In this study, the quantitative performance of the CE method was evaluated. A main issue in virus quantitation is the absence of reference material. Therefore, the concentration of a HPV16-VLP sample produced in the laboratory was determined using ELISA with Gardasil^®, after adjuvant dissolution, as reference material and conformational H16.V5 antibody. HPV16-VLP concentration was found to influence particles electrophoretic mobility until a plateau was reached for concentrations ≤ 50µgml^-1. As zeta potential is directly proportional to the electrophoretic mobility, it was measured at different HPV-VLP concentrations and the results were in complete accordance with the measured electrophoretic mobilities. The concentration dependence of the electrophoretic mobility could be explained by an overlap of the electrical double layers of adjacent particles. The HPV16-VLP peak identity was demonstrated unequivocally by the study of HPV16-VLP/H16.V5 antibody complex formation using affinity CE. Finally, the CE method was successfully validated following the ICH Q2R1 guidelines. To overcome the sample heterogeneity issue, a well-designed sample preparation was used. Considering sample complexity, validation results were satisfactory with maximum repeatability and intermediate precision RSD of 12.2% and a maximum relative bias of 1.4%.

Chimaeric virus-like particles derived from consensus genome sequences of human rotavirus strains co-circulating in Africa

Rotavirus virus-like particles (RV-VLPs) are potential alternative non-live vaccine candidates due to their high immunogenicity. They mimic the natural conformation of native viral proteins but cannot replicate because they do not contain genomic material which makes them safe. To date, most RV-VLPs have been derived from cell culture adapted strains or common G1 and G3 rotaviruses that have been circulating in communities for some time. In this study, chimaeric RV-VLPs were generated from the consensus sequences of African rotaviruses (G2, G8, G9 or G12 strains associated with either P[4], P[6] or P[8] genotypes) characterised directly from human stool samples without prior adaptation of the wild type strains to cell culture. Codon-optimised sequences for insect cell expression of genome segments 2 (VP2), 4 (VP4), 6 (VP6) and 9 (VP7) were cloned into a modified pFASTBAC vector, which allowed simultaneous expression of up to four genes using the Bac-to-Bac Baculovirus Expression System (BEVS; Invitrogen). Several combinations of the genome segments originating from different field strains were cloned to produce double-layered RV-VLPs (dRV-VLP; VP2/6), triple-layered RV-VLPs (tRV-VLP; VP2/6/7 or VP2/6/7/4) and chimaeric tRV-VLPs. The RV-VLPs were produced by infecting Spodoptera frugiperda 9 and Trichoplusia ni cells with recombinant baculoviruses using multi-cistronic, dual co-infection and stepwise-infection expression strategies. The size and morphology of the RV-VLPs, as determined by transmission electron microscopy, revealed successful production of RV-VLPs. The novel approach of producing tRV-VLPs, by using the consensus insect cell codon-optimised nucleotide sequence derived from dsRNA extracted directly from clinical specimens, should speed-up vaccine research and development by by-passing the need to adapt rotaviruses to cell culture. Other problems associated with cell culture adaptation, such as possible changes in epitopes, can also be circumvented. Thus, it is now possible to generate tRV-VLPs for evaluation as non-live vaccine candidates for any human or animal field rotavirus strain.

Understanding internalization of rotavirus VP6 nanotubes by cells: towards a recombinant vaccine

Rotavirus VP6 nanotubes are an attractive option for a recombinant vaccine against rotavirus disease. Protection against rotavirus infection and an adjuvant effect have been observed upon immunization with VP6 nanotubes. However, little information exists on how VP6 nanotubes interact with cells and trigger an immune response. In this work, the interaction between VP6 nanotubes and different cell lines was characterized. VP6 nanotubes were not cytotoxic to any of the animal or human cell lines tested. Uptake of nanotubes into cells was cell-line-dependent, as only THP1 and J774 macrophage cells internalized them. Moreover, the size and spatial arrangement of VP6 assembled into nanotubes allowed their uptake by macrophages, as double-layered rotavirus-like particles also displaying VP6 in their surface were not taken up. The internalization of VP6 nanotubes was inhibited by methyl-β-cyclodextrin, but not by genistein, indicating that nanotube entry is specific, depends on the presence of cholesterol in the plasma membrane, and does not require the activity of tyrosine kinases. The information generated here expands our understanding of the interaction of protein nanotubes with cells, which is useful for the application of VP6 nanotubes as a vaccine.

Bioengineering virus-like particles as vaccines

Virus-like particle (VLP) technology seeks to harness the optimally tuned immunostimulatory properties of natural viruses while omitting the infectious trait. VLPs that assemble from a single protein have been shown to be safe and highly efficacious in humans, and highly profitable. VLPs emerging from basic research possess varying levels of complexity and comprise single or multiple proteins, with or without a lipid membrane. Complex VLP assembly is traditionally orchestrated within cells using black-box approaches, which are appropriate when knowledge and control over assembly are limited. Recovery challenges including those of adherent and intracellular contaminants must then be addressed. Recent commercial VLPs variously incorporate steps that include VLP in vitro assembly to address these problems robustly, but at the expense of process complexity. Increasing research activity and translation opportunity necessitate bioengineering advances and new bioprocessing modalities for efficient and cost-effective production of VLPs. Emerging approaches are necessarily multi-scale and multi-disciplinary, encompassing diverse fields from computational design of molecules to new macro-scale purification materials. In this review, we highlight historical and emerging VLP vaccine approaches. We overview approaches that seek to specifically engineer a desirable immune response through modular VLP design, and those that seek to improve bioprocess efficiency through inhibition of intracellular assembly to allow optimal use of existing purification technologies prior to cell-free VLP assembly. Greater understanding of VLP assembly and increased interdisciplinary activity will see enormous progress in VLP technology over the coming decade, driven by clear translational opportunity.

Simultaneous expression of recombinant proteins in the insect cell-baculovirus system: production of virus-like particles

The insect cell-baculovirus system (IC-BEVS) is widely used for the production of recombinant viral proteins for vaccine applications. It is especially suitable for the production of virus-like particles, which often require the simultaneous production of several recombinant proteins. Here, the available tools and process requirements for the simultaneous production of several recombinant proteins using the IC-BEVS are discussed. The production of double-layered rotavirus like particles is used as a specific example for the simultaneous production of two recombinant proteins. Methods to quantify VLP in small samples are described. The multiplicity and time of infection are presented as tools to manipulate protein concentration, and the effect on protein concentration ratios on the assembly efficiency of double-layered rotavirus like particles is discussed. It was found that not only the ratio between the recombinant proteins is determinant of VLP assembly efficiency, but also that assembly efficiency is related to the characteristics of the assembled proteins. This is the first time that kinetics of VLP production are followed during cultures, and that the assembly efficiency is quantitatively determined.

Recent developments in capillary and chip electrophoresis of bioparticles: Viruses, organelles, and cells

In appropriate aqueous buffer solutions, biological particles usually exhibit a particular electric surface charge due to exposed charged or chargeable functional groups (amino acid residues, acidic carbohydrate moieties, etc.). Consequently, these bioparticles can migrate in solution under the influence of an electric field allowing separation according to their electrophoretic mobilities or their pI values. Based on these properties, electromigration methods are of eminent interest for the characterization, separation, and detection of such particles. The present review discusses the research papers published between 2008 and 2010 dealing with isoelectric focusing and zone electrophoresis of viruses, organelles and microorganisms (bacteria and yeast cells) in the capillary and the chip format.

Molecular and process design for rotavirus-like particle production in Saccharomyces cerevisiae

Background

Virus-like particles (VLP) have an increasing range of applications including vaccination, drug delivery, diagnostics, gene therapy and nanotechnology. These developments require large quantities of particles that need to be obtained in efficient and economic processes. Production of VLP in yeast is attractive, as it is a low-cost protein producer able to assemble viral structural proteins into VLP. However, to date only single-layered VLP with simple architecture have been produced in this system. In this work, the first steps required for the production of rotavirus-like particles (RLP) in S. cerevisiae were implemented and improved, in order to obtain the recombinant protein concentrations required for VLP assembly.

Results

The genes of the rotavirus structural proteins VP2, VP6 and VP7 were cloned in four Saccharomyces cerevisiae strains using different plasmid and promoter combinations to express one or three proteins in the same cell. Performance of the best constructs was evaluated in batch and fed-batch cultures using a complete synthetic media supplemented with leucine, glutamate and succinate. The strain used had an important effect on recombinant protein concentration, while the type of plasmid, centromeric (YCp) or episomal (YEp), did not affect protein yields. Fed-batch culture of the PD.U-267 strain resulted in the highest concentration of rotavirus proteins. Volumetric and specific productivities increased 28.5- and 11-fold, respectively, in comparison with batch cultures. Expression of the three rotavirus proteins was confirmed by immunoblotting and RLP were detected using transmission electron microscopy.

Conclusions

We present for the first time the use of yeast as a platform to express multilayered rotavirus-like particles. The present study shows that the combined use of molecular and bioprocess tools allowed the production of triple-layered rotavirus RLP. Production of VLP with complex architecture in yeasts could lead to the development of new vaccine candidates with reduced restrictions by regulatory agencies, using the successful experience with other yeast-based VLP vaccines commercialized worldwide.

Separation of rotavirus double-layered particles and triple-layered particles by capillary zone electrophoresis

Cell culture derived rotavirus preparations contain a mixture of double-layered particles (DLPs) and triple-layered particles (TLPs). Characterization of rotavirus vaccine products is important to demonstrate a consistent manufacturing process. A capillary zone electrophoresis (CZE) method was developed to separate and quantitate rotavirus DLPs and TLPs in cell lysate samples and CsCl-purified vaccine preparations of each of the five reassortant rotavirus vaccine strains (G1, G2, G3, G4 and P1) contained in the pentavalent rotavirus vaccine, RotaTeq. The CZE electropherograms showed that migration of DLPs and TLPs from both CsCl-purified and cell lysates resulted in a separation distance of approximately 3 min between the two rotavirus particle types. The identification of the peak(s) containing TLPs was confirmed for both CsCl-purified and cell lysate samples by treatment of the samples with 50mM EDTA, which converted TLPs to DLPs. The migration pattern of the DLPs was consistent (23-24 min) among all reassortant strains tested, whether the DLPs were CsCl-purified or from cell lysates. However, the migration pattern of the TLP electropherograms of the reassortant rotavirus strains in cell lysates differed from those of the CsCl-purified reassortant rotavirus strains. In the cell lysate samples, the TLPs of the G1 and G2 reassortant rotavirus strains migrated slower that the corresponding TLPs from the CsCl-purified samples, while the migration time of the TLPs of the G3, G4 and P1 reassortants strains from the cell lysate and CsCl-purified samples appeared similar. Also, the TLPs from the CsCl-purified samples appeared as a defined single peak, while most of the TLPs from the cell lysate samples appeared as a broad peak or as multiple peaks. All the migration patterns were reproducible and consistent. Taking into account reproducibility, objective quantitation, and minimal sample manipulation as well as volume, CZE allowed consistent and quantitative characterization of rotavirus vaccine preparations, which is required for evaluation of vaccine products, including process validation.