On-line preconcentration for the determination of aflatoxins in rice samples by micellar electrokinetic capillary chromatography with laser-induced fluorescence detection

Non-aqueous capillary electrophoresis-time of flight mass spectrometry method to determine emerging mycotoxins

Enniatins (ENN) and beauvericin (BEA) are emerging mycotoxins that have been traditionally determined by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). However, to the best of our knowledge, no analytical methods based on capillary electrophoresis (CE)-MS/MS have been reported so far. Due to their non-polar nature, in this work, a non-aqueous CE (NACE) method coupled to quadrupole time-of-flight-MS is proposed for the first time to identify and quantify these mycotoxins. Determination was achieved in 4 min under optimum conditions: 40 mM ammonium acetate in 80:20 (v/v) acetonitrile-methanol (buffer), 30 kV (voltage), 80 cm (capillary length), 20 °C (capillary temperature) and 50 mbar × 30 s (injection). Higher selectivity can be achieved when compared with LC due to the formation of exclusive CE adducts such as [M + CH₃CH₂NH₃]⁺. "All Ions" acquisition mode was selected as it allows the quantification of the usual ENNs, as well as the identity confirmation of less common ENNs. The method was validated for wheat samples, obtaining limits of quantification from 4.0 to 8.3 μg/kg depending on the emerging mycotoxin, recovery values higher than 87.4%, and intra- and inter-day precision values (RSDs) lower than 15.1% in all cases. Finally, 29 wheat samples were analyzed, finding 26 samples with concentrations of enniatin B higher than the limit of quantification (7.5-1480 μg/kg), 20 for enniatin B1 (5.2-550 μg/kg), 7 for enniatin A (10-55 μg/kg), 4 for enniatin A1 (12.6-77 μg/kg) and 5 for BEA (9.2-16.4 μg/kg). Moreover, two other ENNs were tentatively identified.

Pre-Concentration and Analysis of Mycotoxins in Food Samples by Capillary Electrophoresis

Mycotoxins are considered one of the most dangerous agricultural and food contaminants. They are toxic and the development of rapid and sensitive analytical methods to detect and quantify them is a very important issue in the context of food safety and animal/human health. The need to detect mycotoxins at trace levels and to simultaneously analyze many different mycotoxin types became mandatory to protect public health. In fact, European Commission regulations specified both their limits in foodstuffs and official sample preparation protocols in addition to analytical methods to verify their presence. Capillary Electrophoresis (CE) includes different separation modes, allowing many versatile applications in food analysis and safety. In the context of mycotoxins, recent advances to improve CE sensitivity, particularly pre-concentration techniques or miniaturized systems, deserve remarkable attention, as they provide an interesting approach in the analysis of such contaminants in complex food matrices. This review summarizes the applications of CE combined with different pre-concentration approaches, which have been proposed in the literature (mainly) in the last ten years. A section is also dedicated to recent microchip–CE devices since they represent the most promising CE mode for this application.

Adverse Effects, Transformation and Channeling of Aflatoxins Into Food Raw Materials in Livestock

Aflatoxins are wide-spread harmful carcinogenic secondary metabolites produced by Aspergillus species, which cause serious feed and food contaminations and affect farm animals deleteriously with acute or chronic manifestations of mycotoxicoses. On farm, both pre-harvest and post-harvest strategies are applied to minimize the risk of aflatoxin contaminations in feeds. The great economic losses attributable to mycotoxin contaminations have initiated a plethora of research projects to develop new, effective technologies to prevent the highly toxic effects of these secondary metabolites on domestic animals and also to block the carry-over of these mycotoxins to humans through the food chain. Among other areas, this review summarizes the latest findings on the effects of silage production technologies and silage microbiota on aflatoxins, and it also discusses the current applications of probiotic organisms and microbial products in feeding technologies. After ingesting contaminated foodstuffs, aflatoxins are metabolized and biotransformed differently in various animals depending on their inherent and acquired physiological properties. These mycotoxins may cause primary aflatoxicoses with versatile, species-specific adverse effects, which are also dependent on the susceptibility of individual animals within a species, and will be a function of the dose and duration of aflatoxin exposures. The transfer of these undesired compounds from contaminated feed into food of animal origin and the aflatoxin residues present in foods become an additional risk to human health, leading to secondary aflatoxicoses. Considering the biological transformation of aflatoxins in livestock, this review summarizes (i) the metabolism of aflatoxins in different animal species, (ii) the deleterious effects of the mycotoxins and their derivatives on the animals, and (iii) the major risks to animal health in terms of the symptoms and consequences of acute or chronic aflatoxicoses, animal welfare and productivity. Furthermore, we traced the transformation and channeling of Aspergillus-derived mycotoxins into food raw materials, particularly in the case of aflatoxin contaminated milk, which represents the major route of human exposure among animal-derived foods. The early and reliable detection of aflatoxins in feed, forage and primary commodities is an increasingly important issue and, therefore, the newly developed, easy-to-use qualitative and quantitative aflatoxin analytical methods are also summarized in the review.

Fast screening of aflatoxins in dairy cattle feeds with CE-LIF method combined with preconcentration technique of vortex assisted low density solvent-microextraction

Aflatoxin contamination in agricultural products poses a great threat to humans and livestock. The aim of this study was to establish a simple, rapid, highly sensitive, and inexpensive method for the simultaneous detection of aflatoxin B₁ , B₂ , G₁ , and G₂ in agricultural products. We used a vortex assisted low density solvent-microextraction (VALDS-ME) technique for sample preconcentration and sample detection was achieved with a CE-LIF method. Aflatoxins were separated in an uncoated fused-silica capillary with the MEKC mode and were excited by a 355 nm UV laser to produce native fluorescence for detection. The obtained LOD and LOQ for the four aflatoxins were in the range of 0.002-0.075 and 0.007-0.300 μg/L, respectively, and the analysis time was within 6.5 min. Using the established method, aflatoxins were screened in naturally contaminated dairy cattle feed samples including alfalfa, bran, and corn kernel. The result shows that the alfalfa and bran samples were contaminated with aflatoxins to varying degrees. Compared with other analytical techniques for aflatoxin screening in agricultural products, this CE-LIF method combined with VALDS-ME preconcentration technique is simple, rapid, highly efficient, and inexpensive.

Determination of Aflatoxin B1 in Feedstuffs without Clean-Up Step by High-Performance Liquid Chromatography

A reliable and rapid method has been developed for the determination of aflatoxin B1 (AFB1) in four kinds of feedstuffs comprising broken rice, peanuts, corn, and fishmeal. A sample preparation was carried out based on the QuEChERS method with the exclusion of the clean-up step. In this study, AFB1 was extracted using acetonitrile/methanol (40/60 v/v), followed by partitioning with sodium chloride and magnesium sulfate. High-performance liquid chromatography with precolumn derivatization and fluorescence detection was performed. The coefficients of determination were greater than 0.9800. Throughout the developed method, the recovery of all feedstuffs achieved a range of 82.50-109.85% with relative standard deviation lower than 11% for all analytes at a concentration of 20-100 ng/g. The limit of detection (LOD) ranged from 0.2 to 1.2 ng/g and limit of quantitation (LOQ) ranged from 0.3 to 1.5 ng/g. The validated method was successfully applied to a total of 120 samples. The occurrence of AFB1 contamination was found at the following concentrations: in broken rice (0.44-2.33ng/g), peanut (3.97-106.26ng/g), corn (0.88-50.29 ng/g), and fishmeal (1.06-10.35 ng/g). These results indicate that the proposed method may be useful for regularly monitoring AFB1 contamination in feedstuffs.

Rapid analysis and identification of multi-class mycotoxins in Morinda officinalis by UFLC-ESI-MS/MS

Simultaneous quantification and identification of multi-class mycotoxins in Morinda officinalis by DAS-UFLC-MS/MS.

Mycotoxin Analysis: New Proposals for Sample Treatment

Mycotoxins are toxic secondary metabolites produced by different fungi, with different chemical structures. Mycotoxins contaminate food, feed, or raw materials used in their production and cause diseases and disorders in humans and livestock. Because of their great variety of toxic effects and their extreme heat resistance, the presence of mycotoxins in food and feed is considered a high risk to human and animal health. In order to ensure food quality and health consumers, European legislation has set maximum contents of some mycotoxins in different matrices. However, there are still some food commodities susceptible to fungal contamination, which were not contemplated in this legislation. In this context, we have developed new analytical techniques for the multiclass determination of mycotoxins in a great variety of food commodities (some of them scarcely studied), such as cereals, pseudocereals, cereal syrups, nuts, edible seeds, and botanicals. Considering the latest technical developments, ultrahigh performance liquid chromatography coupled to tandem mass spectrometry has been chosen as an efficient, fast, and selective powerful analytical technique. In addition, alternative sample treatments based on emerging methodologies, such as dispersive liquid-liquid microextraction and QuEChERS, have been developed, which allow an increased efficiency and sample throughput, as well as reducing contaminant waste.

Determination of phthalic acid esters in Chinese white spirit using dispersive liquid-liquid microextraction coupled with sweeping β-cyclodextrin-modified micellar electrokinetic chromatography

A simple method that consumes low organic solvent is proposed for the analysis of phthalic acid esters in Chinese white spirit using dispersive liquid-liquid microextraction coupled with sweeping-micellar electrokinetic chromatography. Tetrachloromethane and white-spirit-containing ethanol were used as the extraction and dispersing solvents, respectively. The electrophoresis separation buffer was composed of 5 mM β-cyclodextrin, 50 mM sodium dodecyl sulfate and 25 mM borate buffer (pH 9.2) with 9% acetonitrile, enabling the baseline resolution of the analytes within 13 min. Under the optimum conditions, satisfactory linearities (5-1000 ng/mL, r ≥ 0.9909), good reproducibility (RSD ≤ 6.7% for peak area, and RSD ≤ 2.8% for migration time), low detection limits (0.4-0.8 ng/mL) and acceptable recovery rates (89.6-105.7%) were obtained. The proposed method was successfully applied to 22 Chinese white spirits, and the content of dibutyl phthalate in 55% of the samples exceeded the Specific Migration Limit of 0.3 mg/kg established by the domestic and international regulations.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2010-2012)

CE has been alive for over two decades now, yet its sensitivity is still regarded as being inferior to that of more traditional methods of separation such as HPLC. As such, it is unsurprising that overcoming this issue still generates much scientific interest. This review continues to update this series of reviews, first published in Electrophoresis in 2007, with updates published in 2009 and 2011 and covers material published through to June 2012. It includes developments in the field of stacking, covering all methods from field amplified sample stacking and large volume sample stacking, through to isotachophoresis, dynamic pH junction and sweeping. Attention is also given to online or inline extraction methods that have been used for electrophoresis.

Multiclass mycotoxin analysis in Silybum marianum by ultra high performance liquid chromatography-tandem mass spectrometry using a procedure based on QuEChERS and dispersive liquid-liquid microextraction

Ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) has been proposed for the determination of 15 mycotoxins in milk thistle (Silybum marianum), including aflatoxins, fumonisins, trichothecenes, ochratoxin A, citrinin, sterigmatocystin and zearalenone. The mycotoxins were detected by electrospray ionization in positive ion mode and multiple reaction monitoring (MRM), achieving the separation in about 4min. Sample treatment consisted of a modified method based on a first step using a QuEChERS-based procedure which allowed the determination of fumonisin B1, fumonisin B2, nivalenol, deoxynivalenol and fusarenon-X, and a subsequent clean-up based on dispersive liquid-liquid microextraction (DLLME) for the determination of the rest of mycotoxins. The method has been validated in extract and seeds of milk thistle, obtaining limits of quantification lower than those usually permitted by legislation in food matrices, with precisions lower than 10%. Recoveries were between 62.3% and 98.9%, except for zearalenone in seeds samples and citrinin in extract. The method was also applied for studying the occurrence of these mycotoxins in market samples (six samples of seeds, three of them purchased in bulk in a street vendor, and one natural extract of milk thistle), and HT-2, T-2 and zearalenone have been found in some of the samples. To the best of our knowledge, this is the first time that this type of treatment has been used for these complex food matrices, allowing the analyses of the most important mycotoxins.

Technical improvement of the TBP (tubulin-based polymorphism) method for plant species detection, based on capillary electrophoresis

Nowadays, feed and food safety and traceability are of primary importance. Hence, a correct labeling of the different products is highly desirable in general, but mandatory for those people who are suffering from eating disorders and food allergies. Among the technologies that have been developed for feed and food analysis, the patented tubulin-based polymorphism (TBP) method emerges as an easy, versatile, and inexpensive diagnostic tool. Initially used to fingerprint different plant species and varieties, TBP was then successfully applied to trace species in mixtures of plant origin such as commercial feeds. TBP is a DNA-based molecular marker, that makes use of PCR for the selective amplification of plant β-tubulin introns. Amplified fragments are then separated by PAGE and visualized by silver staining. We have now developed an improved version of TBP. Based on capillary electrophoresis and fluorescence detection, it makes the method automatic, more sensible, reproducible, and faster. Compared to the classic TBP, this new version allows to obtain a better data resolution and an easier interpretation of the results, clearing the way to large-scale feed/food diagnostics.

Contemporary sample stacking in analytical electrophoresis

Sample stacking is a term denoting a multifarious class of methods and their names that are used daily in CE for online concentration of diluted samples to enhance separation efficiency and sensitivity of analyses. The essence of these methods is that analytes present at low concentrations in a large injected sample zone are concentrated into a short and sharp zone (stack) in the separation capillary. Then the stacked analytes are separated and detected. Regardless of the diversity of the stacking electromigration methods, one can distinguish four main principles that form the bases of nearly all of them: (i) Kohlrausch adjustment of concentrations, (ii) pH step, (iii) micellar methods, and (iv) transient ITP. This contribution is a continuation of our previous reviews on the topic and brings an overview of papers published during 2010-2012 and relevant to the mentioned principles (except the last one which is covered by another review in this issue).

Developments in mycotoxin analysis: an update for 2010-2011

This review highlights developments in mycotoxin analysis and sampling over a period between mid-2010 and mid-2011. It covers the major mycotoxins: aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxin, patulin, trichothecenes, and zearalenone. Analytical methods for mycotoxins continue to be developed and published. Despite much interest in immunochemical methods and in the rapid development of LC-MS methodology, more conventional methods, sometimes linked to novel clean-up protocols, have also been the subject of research publications over the above period. Occurrence of mycotoxins falls outside the main focus of this review; however, where relevant to analytical method development, this has been mentioned.