Comparison of human and canine external femoral morphologies in the context of total hip replacement

Measurement of the Femoral Anteversion Angle in Medium and Large Dog Breeds Using Computed Tomography

To promote the development of an optimally functional total hip prosthesis for medium and large dog breeds, accurate measurements of the normal anatomy of the proximal femur and acetabular retroversion are essential. The aim of the current study was to obtain precise normal values of the femoral anteversion angle using computed tomography on cadavers of mature dogs with normal hip joints of both medium and large breeds. Based on the length of their femora 58 dogs were allocated either to group I: ≤195 mm or group II: >195 mm. In the study the femoral anteversion angle (FAA) was measured on each femur using multi-slice spiral computed tomography (CT). The data were processed as multi-planar and three-dimensional reconstructions using Advantage Workstation software. The CT measurements showed that the mean ± standard deviation (SD) FAA of group I was 31.34 ± 5.47° and in group II it was 31.02 ± 4.95°. There were no significant mean difference associations between the length of the femur and the femoral neck angle in either group (P > 0.05). The data suggest that a prosthesis FAA of 31 degrees would be suitable for a wide range of dog sizes.

An overview of de novo bone generation in animal models

Some of the earliest success in de novo tissue generation was in bone tissue, and advances, facilitated by the use of endogenous and exogenous progenitor cells, continue unabated. The concept of one health promotes shared discoveries among medical disciplines to overcome health challenges that afflict numerous species. Carefully selected animal models are vital to development and translation of targeted therapies that improve the health and well-being of humans and animals alike. While inherent differences among species limit direct translation of scientific knowledge between them, rapid progress in ex vivo and in vivo de novo tissue generation is propelling revolutionary innovation to reality among all musculoskeletal specialties. This review contains a comparison of bone deposition among species and descriptions of animal models of bone restoration designed to replicate a multitude of bone injuries and pathology, including impaired osteogenic capacity.

Measurement of the femoral neck angle in medium and large dog breeds using computed tomography

The aim of this study was to get precise normal values of the femoral neck angle (FNA) in support of developing an optimally functioning total hip prosthesis for medium and large dog breeds. Accordingly, two- and three-dimensional computed tomographic images of the anatomical structures of the proximal femora of 58, hip-dysplasia-free, mature dogs of medium and large breeds were studied. Based on the length of their femora the dogs were allocated to Group I (from 145 to 195 mm) and Group II (from 196 to 240 mm). The FNA was measured on each femur using multi-slice spiral computed tomography (CT). The two- and three-dimensional image data were processed as multi-planar and threedimensional reconstructions using Advantage Workstation software. The CT measurements revealed that Group I had an average femoral neck angle of 147.59° (min. 144.05°, max. 153.35°), while in Group II the average FNA was 147.46° (min. 141°, max. 154.35°). There was no significant correlation between the length of the femur and the FNA in either group. The optimal FNA for a total hip prosthesis is 147.5° for medium and large dog breeds.

Surface characterization and in vivo evaluation of laser sintered and machined implants followed by resorbable-blasting media process: A study in sheep

Background

This study aimed to compare the histomorphometric and histological bone response to laser-sintered implants followed by resorbable-blasting media (RBM) process relative to standard machined/RBM surface treated implants.

Material and Methods

Six male sheep (n=6) received 2 Ti-6Al-4V implants (1 per surface) in each side of the mandible for 6 weeks in vivo. The histomorphometric parameters bone-implant contact (BIC) and bone area fraction occupancy (BAFO) were evaluated.

Results

Optical interferometry revealed higher Sa and Sq values for the laser-sintered/RBM surface in relation to standard/RBM implants. No significant differences in BIC were observed between the two groups (p>0.2), but significantly higher BAFO was observed for standard/RBM implants (p<0.01).

Conclusions

The present study demonstrated that both surfaces were biocompatible and osseoconductive, and the combination of laser sintering and RBM has no advantage over the standard machined implants with subsequent RBM.

Key words:Dental implants, osseointegration, resorbable- blasting media, sheep, in vivo.

The Odocoileus virginianus Femur: Mechanical Behavior and Morphology

Biomechanical research relies heavily on laboratory evaluation and testing with osseous animal structures. While many femora models are currently in use, including those of the European red deer (Cervus elaphus), the Odocoileus virginianus femur remains undocumented, despite its regional abundance in North America. The objective of this study was to compare biomechanical and morphological properties of the Odocoileus virginianus femur with those of the human and commonly used animal models. Sixteen pairs of fresh-frozen cervine femora (10 male, 6 female, aged 2.1 ± 0.9 years) were used for this study. Axial and torsional stiffnesses (whole bone) were calculated following compression and torsion to failure tests (at rates of 0.1 mm/sec and 0.2°/sec). Lengths, angles, femoral head diameter and position, periosteal and endosteal diaphyseal dimensions, and condylar dimensions were measured. The results show that the cervine femur is closer in length, axial and torsional stiffness, torsional strength, and overall morphology to the human femur than many other commonly used animal femora models; additional morphological measurements are comparable to many other species’ femora. The distal bicondylar width of 59.3mm suggests that cervine femora may be excellent models for use in total knee replacement simulations. Furthermore, the cervine femoral head is more ovoid than other commonly-used models for hip research, making it a more suitable model for studies of hip implants. Thus, with further, more application-specific investigations, the cervine femur could be a suitable model for biomechanical research, including the study of ballistic injuries and orthopaedic device development.

Regeneration of the periodontium using enamel matrix derivative in combination with an injectable bone cement

OBJECTIVES

Enamel matrix derivative (EMD) has proven to enhance periodontal regeneration; however, its effect is mainly restricted to the soft periodontal tissues. Therefore, to stimulate not only the soft tissues, but also the hard tissues, in this study EMD is combined with an injectable calcium phosphate cement (CaP; bone graft material). The aim was to evaluate histologically the healing of a macroporous CaP in combination with EMD.

MATERIALS AND METHODS

Intrabony, three-wall periodontal defects (2 × 2 × 1.7 mm) were created mesial of the first upper molar in 15 rats (30 defects). Defects were randomly treated according to one of the three following strategies: EMD, calcium phosphate cement and EMD, or left empty. The animals were killed after 12 weeks, and retrieved samples were processed for histology and histomorphometry.

RESULTS

Empty defects showed a reparative type of healing without periodontal ligament or bone regeneration. As measured with on a histological grading scale for periodontal regeneration, the experimental groups (EMD and CaP/EMD) scored equally, both threefold higher compared with empty defects. However, most bone formation was measured in the CaP/EMD group; addition of CAP to EMD significantly enhanced bone formation with 50 % compared with EMD alone.

CONCLUSIONS

Within the limits of this animal study, the adjunctive use of EMD in combination with an injectable cement, although it did not affect epithelial downgrowth, appeared to be a promising treatment modality for regeneration of bone and ligament tissues in the periodontium.

CLINICAL RELEVANCE

The adjunctive use of EMD in combination with an injectable cement appears to be a promising treatment modality for regeneration of the bone and ligament tissues in the periodontium.

Rabbit as an animal model for experimental research

Animal experimentation is carried out in consultation with the veterinary wing but it is essential that be familiar with experimental protocols of animal model to be able to design an approriate study. This is more so in place where the veterinary facilities are not easily available.Span Rabbits are commonly used as subjects for screening implant material. They have gained favour for their numerous advantages even though they should be ideally used prior to testing in a larger animal model. Though experimentation on rabbits seems to be easy there are many pitfalls. Our endeavor in this article is to integrate all the data about maintaining rabbits as a model and to critically analyze it on the basis of our experimentation.

Bisphosphonate related osteonecrosis of the jaw: A minipig large animal model

Bisphosphonate related osteonecrosis of the jaw (BRONJ) is rare but potentially severe, and the etiopathology and risk factors are poorly defined. To date, it has not been possible to induce BRONJ in a large animal model, a shortfall this study aims to redress. Ten two-year-old adult Göttingen minipigs were split into two groups. Five pigs (group 1) were administered intravenously a weekly dose of a bisphosphonate (zoledonate 0.05mg/kg body weight, approximating the oncologic dose in humans) and five pigs (group 2) served as controls. After 6 weeks, tooth extractions were performed in the upper and lower jaw (both groups) and the bisphosphonate administration continued for a further 10 weeks (group 1 only). Clinical and blood parameters were monitored throughout the entire experiment; thereafter, the jaw-bones were subjected to macroscopic, radiological (CT) and histological investigations. Whilst the extraction sites in the control group healed within two weeks, all animals in the bisphosphonate group exhibited exposed bone and impaired wound healing, indicators that are synonymous of macroscopically advanced osteonecrosis. Radiological and in particular histological investigations confirmed the presence of BRONJ in the animals from group 1. This paper demonstrates that the administration of bisphosphonates, in combination with tooth extractions, induces BRONJ in a minipig model. The ability to study BRONJ in miniature pigs, animals with a bone structure not dissimilar to humans, may improve our knowledgebase regarding the etiopathology, the prophylaxis and potentially uncover new therapies of BRONJ.

Characterization and in vivo evaluation of laser sintered dental endosseous implants in dogs

Laser metal sintering has shown promising results, but no comparison with other commercially available surface has been performed. This study sought to evaluate the biomechanical and histological early bone response to laser sintered implants relative to alumina-blasted/acid-etched (AB/AE). Surface topography was characterized by scanning electron microscopy and optical interferometry. Surface chemistry was assessed by x-ray photoelectron spectroscopy. Beagle dogs (n = 18) received 4 Ti-6Al-4V implants (one per surface) in each radius, remaining for 1, 3, and 6 weeks (n = 6 dogs per evaluation time) in vivo. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were evaluated. Biomechanical evaluation comprised torque-to-interface failure. The laser sintered surface presented higher S(a) and S(q) than AB/AE. Chemistry assessment showed the alloy metallic components along with adsorbed carbon species. Significantly higher torque was observed at 1 (p < 0.02) and 6 week (p < 0.02) for the laser sintered, whereas at 3 week no significant differences were observed. Significantly higher BIC and BAFO was observed for the Laser Sintered (p < 0.04, and p < 0.03, respectively) only at 1 week, whereas no significant differences were observed at 3 and 6 weeks. The laser sintered implants presented biocompatible and osseoconductive properties and improved biomechanical response compared with the AB/AE surface only at 1 and 6 weeks in vivo.

Effect of triple pelvic osteotomy on the proximal femoral geometry in dysplastic dogs

Triple pelvic osteotomy (TPO) is one of the surgical procedures for use to try to reduce subsequent degenerative joint disease or modify the progress of hip dysplasia in young dogs. Joint force and pressure distribution were changed by this procedure. Therefore, the aim of this study was to find out whether the remodeling of proximal femur exists or not after TPO in dysplastic dogs. Ten femora from five young dysplastic mongrel dogs, treated unilaterally with TPO using 20° canine pelvic osteotomy plates, were used. One year after TPO, neck-proximal shaft angle, femoral head, neck, diaphyseal and mid-shaft diameters, total femoral, femoral neck axis, and intertrochanteric, femoral head offset lengths as well as the lengths from head center to lateral margin of greater trochanter and to proximal femoral axis were measured from the bone. The significant differences between treatment and control side were determined in Norberg angle, neck-proximal shaft angle, neck diameter, diaphyseal diameter, mid-shaft diameter, length from head center to proximal femoral axis and femoral head offset length. In conclusion, although small number of cases was used, it was determined that the aforementioned variables are affected by TPO. So, these variables may be supply additional information about the changes to the joint following TPO in dysplastic dogs.

The challenge of establishing preclinical models for segmental bone defect research

A considerable number of international research groups as well as commercial entities work on the development of new bone grafting materials, carriers, growth factors and specifically tissue-engineered constructs for bone regeneration. They are strongly interested in evaluating their concepts in highly reproducible large segmental defects in preclinical and large animal models. To allow comparison between different studies and their outcomes, it is essential that animal models, fixation devices, surgical procedures and methods of taking measurements are well standardized to produce reliable data pools and act as a base for further directions to orthopaedic and tissue engineering developments, specifically translation into the clinic. In this leading opinion paper, we aim to review and critically discuss the different large animal bone defect models reported in the literature. We conclude that most publications provide only rudimentary information on how to establish relevant preclinical segmental bone defects in large animals. Hence, we express our opinion on methodologies to establish preclinical critically sized, segmental bone defect models used in past research with reference to surgical techniques, fixation methods and postoperative management focusing on tibial fracture and segmental defect models.

Segmentation of the canine population in different femoral morphological groups

OBJECTIVE

The incidence of femoral traumatology and hip dysplasia shows the need to design canine specific femoral implants in veterinary surgery. A good knowledge of femoral morphology, and particularly of intra-species variability, is required to develop a well-adapted canine femoral intramedullary implant. The aim of this study is to evaluate the morphological variability of the canine femur and to propose a segmentation of this population.

PROCEDURE

This study proposes different possibilities for the segmentation of a canine population of 103 dogs of various common breeds in relation to their femoral morphology. These segmentations were obtained with a statistical methodology, which takes into account 24 measured and calculated morphological parameters of 206 canine femurs.

RESULTS

The segmentation of this canine population into four or six homogeneous groups related to the femoral morphology were the two most relevant solutions. The total length of the femur and the femoral head diameter were the best discriminant parameters for this segmentation.

CONCLUSION

Knowledge of the variability of the femoral morphology in the canine species and the possibility of splitting the canine population into homogeneous morphological groups are useful for the design of specific canine femoral implants. The femoral morphological profiles of each group constitute an essential database for fitting the best orthopedic implant to the bone.

Ex vivo comparison of one versus two distal screws in 8 mm model 11 interlocking nails used to stabilize canine distal femoral fractures

OBJECTIVE

To compare the structural properties of an 8 mm model 11 interlocking nail (IN) with 2 proximal and 2 distal screws (2/2) to 2 proximal and 1 distal screws (2/1) in an unstable canine fracture model.

STUDY DESIGN

Ex vivo biomechanical investigation.

SAMPLE POPULATION

Eight pairs of adult canine femurs.

METHODS

A simple transverse distal metaphyseal femoral fracture with a 1 cm gap was created. The unstable fracture in 1 femur was repaired with a nail with 2 distal and 2 proximal screws and the paired femur with a nail with 1 distal and 2 proximal screws. Cyclic mechanical testing in torsion was performed to assess fatigue life, peak torque, stiffness, and mode of failure.

RESULTS

All 2/1 IN-femoral constructs, but only 2 of eight 2/2 constructs, failed before completion of 50,000 loading cycles. The 2/2 constructs had significantly greater peak torque to failure (P = .002) and longer fatigue life (P = .00003) compared with 2/1 constructs. There were no significant differences in stiffness between 2/2 and 2/1 constructs when the non-failed constructs were compared (P > .5). All constructs failed by screw deformation.

CONCLUSIONS

An 8 mm model 11 IN used for fixation of unstable canine distal femoral fractures has a longer fatigue life and is stronger under torsional loads when 2 rather than 1 distal screws are placed.

CLINICAL RELEVANCE

When repairing unstable canine distal femoral fractures with an IN system, 2 distal screws should be inserted to avoid catastrophic implant failure before bone healing is achieved.

Assessing the dog as a model for human total hip replacement: analysis of 38 postmortem-retrieved canine cemented acetabular components

Thirty-eight cemented acetabular components that had been clinically implanted in client-owned dogs were retrieved postmortem and analyzed for mechanical stability, volumetric wear, and articular surface damage. Comparison of the results from this study with similar studies on autopsy-retrieved human components will provide insight into the adequacy of the dog as a model for human total hip replacement (THR). The canine average volumetric wear rate (6.7 +/- 4.2 mm(3) per year) was an order of magnitude lower than similar studies of human components; however, articular surface damage was considerably different from, and more severe than, that reported in the literature for human acetabular components. The incidence of mechanical loosening of the canine acetabular component was high, with 20 of 38 (52.6%) testing as loose. There was a positive correlation between articular surface damage and mechanical loosening of the acetabular component, but there was no significant correlation between volumetric wear and mechanical loosening, as seen in human retrieval studies. Initial failure events for the canine acetabular component appear to be mechanical in nature. Differences between human and canine acetabular components with regard to wear volume, articular surface damage, and mechanical loosening need to be taken into account when one is designing studies using dogs as the animal model for human THR.

Geometric analysis of the proximal femur in a diverse sample of dogs

Dogs are often used as experimental models for studies of human hip replacement. A precise knowledge of femoral morphology is required to improve osteointegration of cementless prostheses by bone ingrowth or determination of the best design for total hip prostheses. To better understand the differences between breeds, we measured or calculated 24 external and internal features of the femur on standard radiographs of dogs that differed greatly in size and body type. We considered the appropriateness of the canine model for human total hip replacement studies and show that human and canine femurs differ in characteristics like anteversion, cortico-medullary index or endosteal shape. Knowledge of these differences and similarities makes it possible to design well-adapted stems for dogs.

Assessing the dog as a model for human total hip replacement

Post-mortem retrieval of canine, cemented femoral components was analysed to assess the performance of these implants in the dog as a model for human total hip replacement (THR). Mechanical testing and radiological analysis were performed to determine the stability of the implant and the quality of the cement. Thirty-eight implants from 29 dogs were retrieved after time intervals ranging from 0.67 to 11.67 years. The incidence of aseptic loosening was 63.2%, much higher than in human patients (6% in post-mortem studies). Failure of the femoral implants began with debonding at the cement-metal interface, similar to that in implants in man. The incidence of aseptic loosening was much lower in bilateral than in unilateral implants. Significant differences were observed for three different designs of implant. While the dog remains the animal model of choice for THR, results from this study provide insight into interspecies differences in the performance of implants. For example, the performance of THR in dogs should be compared with that in young rather than in elderly human patients.

Automatic generation of accurate subject-specific bone finite element models to be used in clinical studies

Most of the finite element models of bones used in orthopaedic biomechanics research are based on generic anatomies. However, in many cases it would be useful to generate from CT data a separate finite element model for each subject of a study group. In a recent study a hexahedral mesh generator based on a grid projection algorithm was found very effective in terms of accuracy and automation. However, so far the use of this method has been documented only on data collected in vitro and only for long bones. The present study was aimed at verifying if this method represents a procedure for the generation of finite element models of human bones from data collected in vivo, robust, accurate, automatic and general enough to be used in clinical studies. Robustness, automation and numerical accuracy of the proposed method were assessed on five femoral CT data sets of patients affected by various pathologies. The generality of the method was verified by processing a femur, an ileum, a phalanx, a proximal femur reconstruction, and the micro-CT of a small sample of spongy bone. The method was found robust enough to cope with the variability of the five femurs, producing meshes with a numerical accuracy and a computational weight comparable to those found in vitro. Even when the method was used to process the other bones the levels of mesh conditioning remained within acceptable limits. Thus, it may be concluded that the method presents a generality sufficient to cope with almost any orthopaedic application.

Age-Related mineralization heterogeneity changes in trabecular bone of the proximal femur

Although there is extensive documentation in the literature regarding the importance of trabecular bone for proximal femoral integrity and fracture resistance, there remain gaps in our understanding of the basic mineral changes that may occur in trabecular bone attributable to aging. It is unclear what age-related changes take place in the trabecular bone of the proximal femur, a common fracture site in the elderly. It has been suggested that some explanation for conflicting reports on cancellous bone may be found at a microscopic level. The goal of this study was to document age-related changes in micromineralization in the proximal femur of Caucasian females using backscattered electron imaging technology. Proximal femurs were obtained from 11 young and 11 elderly females. Sections of bone from the superior and inferior neck and superior and inferior trochanter were analyzed in a scanning electron microscope using the backscatter technique to determine ash percent. Mean ash percent did not change with age in any of the four regions (P > 0.05). However, while the mean ash percent did not change, there was a dramatic increase in variability elderly age group and loss of mineral heterogeneity. This indicates that there are subpopulations with higher or lower ash percents than the mean in the elderly study group in this investigation. While variance changed dramatically, variance within individuals did not change significantly with age (P > 0.05). The results of this study suggest that changes in micromineralization may occur within an individual, adding a possible new dimension to our understanding of fracture risk in the elderly. Future studies should examine a longer population base to confirm this observation.

Measurement of femoral anteversion by biplane radiography and computed tomography imaging: comparison with an anatomic reference

RATIONALE AND OBJECTIVES

The ability of biplane radiography and standard computed tomography (CT) imaging techniques to measure accurately the human femoral anteversion was evaluated and compared with an anatomic reference: the osteometric method.

METHODS

Femoral anteversion of 10 normal adult cadaveric human femora were determined using a standardized anatomic measurement method (the anatomic reference) and the 2 selected common imaging techniques (biplane radiography and CT).

RESULTS

On average, anteversion measurements using biplane radiography were 21/2 times greater in magnitude than measurements using the anatomic reference (absolute mean difference, 13.5 degrees; P = 0.004). In contrast, the discrepancy between CT and anatomic reference measurements was notably less and not statistically significant (absolute mean difference, 2.8 degrees; P = 0.351). In addition, biplane radiography demonstrated greater inter- and intrarater variability than CT imaging for repeated measurements of the same bone specimens.

CONCLUSIONS

Compared with the anatomic reference, CT imaging was an accurate and valid technique for measuring the femoral anteversion. In contrast, biplane radiography demonstrated significant inconsistencies in the measurement of this anatomic parameter.

The effect of femoral prosthesis design on cement strain in cemented total hip arthroplasty

Finite element studies show that the highest cement stresses are located at the most proximal and distal ends of the prosthesis. In vitro biomechanical and histologic analyses of autopsy-retrieved cemented femoral components show these areas to be associated with cement-prosthesis debonding. In this study, cement strains were measured in 2 geometrically different femoral stems in paired cadaver femora: A straight, collared, moderately tapered stem (Centralign) was compared with an anatomically curved, collarless, dramatically tapered stem (Scientific Hip Prosthesis [SHP]). Results showed that the maximum strain and the overall strain profile differed between the 2 stems. The Centralign had peak strains located at the most proximal gauge positions, whereas the peak strains of the SHP were located around the middle of the femoral stem. Minimization of cement strain, especially at the crucial proximal and distal areas of the stem, by altering component design may be able to reduce cement-prosthesis debonding and improve clinical results.

Comparison of three methods of gluteal muscle attachment to an allograft/endoprosthetic composite in a canine model

This study used radiography, gait analysis, gluteal muscle mass, mechanical testing, and qualitative histology to compare three methods of gluteal muscle attachment to an allograft/endoprosthetic composite of the proximal 25% of the femur in an in vivo canine model. The three methods of gluteal muscle attachment were identical to those used clinically in human patients for hip revision and proximal femoral limb salvage: the host gluteal tendon sutured to the allograft tendon (tendon group), the host greater trochanter with intact gluteal tendons secured to the allograft with a cable-grip system (grip group), and periosteally vascularized proximal femoral bone onlay with intact tendons wrapped around the allograft (wrap group). On the basis of radiographs taken every 2 months, the tendon group had more graft fractures than did the grip or wrap group. Radiographic union of the graft-host bone junction occurred more rapidly and there was less graft resorption in the wrap group than in the other two groups. In all dogs, peak vertical ground-reaction forces in the treated limb decreased immediately after surgery and then slowly increased over the length of the study. The dogs in the wrap group regained normal weight-bearing on the treated limb more quickly than did those in the other groups. The constructs in the tendon group were weaker and less stiff immediately after surgery than were those in the other groups or in intact controls. Histologic analysis confirmed that the wrap technique resulted in complete union of the host bone-allograft junction more often than did the other techniques. The wrap method had the best functional outcome after 9 months when an allograft/endoprosthetic composite was used during total hip arthroplasty in this canine model.

Comparative micromotion of fully and proximally cemented femoral stems

This investigation studied the differences of in vitro micromotion between two stem designs. The two stem types investigated were a proximally cemented stem with distal press fit and a fully cemented stem. After initial micromotion testing to 2250 N in simulated single leg stance and stair climb, six of each stem type were loaded dynamically for 1 million cycles at 950 N at 1 Hz. Micromotion studies were repeated. The two stem types had similar micromotion. For the single leg stance, fully cemented implant motion averaged (+/- 95% confidence) 18 +/- 8 microns toggle, 41 +/- 5 microns axial, and 59 +/- 22 microns rotation. Proximally cemented implant motion averaged 20 +/- 6 microns toggle, 42 +/- 6 microns axial, and 31 +/- 15 microns rotation. For the simulated stair climb, fully cemented implant motion averaged 24 +/- 10 microns toggle, 45 +/- 8 microns axial, and 92 +/- 32 microns rotation. Proximally cemented implant motion averaged 19 +/- 10 microns toggle, 42 +/- 9 microns axial, and 87 +/- 53 microns rotation. For both loading conditions, there were no significant differences measurable between the two systems. After dynamic testing of the fully cemented implants, there were no significant changes in the micromotion of either the toggle or the rotation, but an average of 18 microns increase of axial motion was measured in the fully cemented stem. For the proximally cemented implants, there were no significant changes after dynamic testing. This differences was not considered clinically significant because roentgen stereophotogrammetric analysis studies have shown that more than 4 mm of migration is required before clinical symptoms manifest. The protocol developed in this study may help provide a screening process to determine the stability of femoral stem designs before these devices are used clinically.

Radiographic and histologic analysis of cemented double tapered femoral stems

The macroscopic, radiographic, and histologic features of the prosthesis-cement and cementbone interfaces and adjacent bone were studied in 21 cemented hemiarthroplasties in sheep that had lived until sacrifice at 9 months. The features were compared with those immediately after implantation of the stem in the contralateral femur. The femoral stem was a double taper that was either polished collarless, matte collarless, or matte collared. There was no prosthesis to cement debonding or cement to bone radiolucent line immediately after implantation, and there was excellent interdigitation at the cement-bone interface. After 9 months there was no evidence of prosthesis to cement debonding and no stem with definite loosening. At 9 months after implantation there was evidence of bone remodeling with new bone filling what were presumed to be gaps at the cement-bone interface from immediately after implantation. Radiolucent lines at the cement-bone interface were found to represent trabeculation of the cortical bone rather than the presence of a complete fibrous interface, which was not seen. There was no difference between stem types. Sheep have been shown to be useful in a model of cemented hip arthroplasty and, although no differences were seen between stem types at 9 months after implantation, long term differences cannot be excluded.

Comparison of human, primate, and canine femora: implications for biomaterials testing in total hip replacement

The canine model remains an animal of choice for determining the efficacy and safety of various materials and designs used in human total hip replacement (THR). The primate also is used in orthopedic-related research for studying limb anatomy, gait, and age-related bone loss. In order to better understand the appropriateness of these animal models for human THR, external morphologies of thirty-three adult Caucasian human, sixteen adult chimpanzee, and forty-two adult greyhound femora were compared using osteometric methods. Measured parameters included anteversion angle, cervico-diaphyseal angle, femoral head offset in the frontal plane, and anterior bow profiles along the femoral diaphysis. Although some of the measured parameters were approximately similar between species (e.g., mean cervico-diaphyseal angle of humans and chimpanzees), the majority demonstrated morphologic differences that may be biomechanically significant for interpreting stress transfer across the hip (e.g., mean anteversion angle and mean normalized femoral head offset between species). Additionally, age-related changes in proximal femoral morphology and gait pattern, as well as species-related differences in local muscle and inertial forces, may result in notably different loading conditions across the hip joint of each species. Therefore, discretion must be exercised when evaluating canine or primate THR materials and designs for potential use in the human hip.

Intramedullary implant of plasma-sprayed hydroxyapatite coating: an interface study

An intramedullary implant model in the canine femora was developed to evaluate the mechanical and histological responses between cancellous bone and plasma-sprayed hydroxyapatite coatings (HACs) on ti-6A1-4V implants, with 12- and 24-week follow-ups. HACs of different thicknesses were investigated. Results of the mechanical testings revealed that after 24 weeks of implantation, the mean shear strength (2.49 +/- 0.12 MPa) of the 50 microns HACs was significantly higher (p < 0.05) than that of the 200 microns HACs (1.44 +/- 0.19 MPa). However, using backscattered electron images (BEIs) throughout all the implant periods, no substantial histological variations in the extent of new bone apposition between the two HACs were observed. Occasionally, solution-mediated disintegration of the 50 microns HAC was found 24 weeks postimplantation. Histomorphometric studies from the BEIs demonstrated that for both HACs the percentage of the direct HAC-cancellous bone contact was approximately 50% at 12 weeks and 75% at 24 weeks. After the mechanical tests, the 200 microns HACs had fracture sites either inside the coating layers or at the HAC-titanium interfaces, which might explain why the mechanical performance of the 200 microns HACs was inferior to that of the 50 microns HACs even though both HACs had the same histological behaviors.

Progression of human bone ingrowth into porous-coated implants. Rate of bone ingrowth in humans

We report the measured progression of human cancellous bone ingrowth into load-bearing porous-coated titanium implants over 5 time periods (0, 3, 6, 9, and 12 months). There was a statistically significant progression of bone ingrowth into the implants over a 9-month period, but the 9- and 12-month data were not different. Investigators are advised to analyze time "0" implants in order to distinguish mechanical impaction of bone from the biological process of bone ingrowth.

The rat as an animal model for total hip replacement arthroplasty

Dogs, goats, and sheep are the most commonly used animals in studies of total hip replacement (THR) arthroplasty. However, the development of a small, laboratory animal model could have significant economic and housing advantages over these models when studying the long-term systemic effects of chronic mechanically functional implants. A THR was designed and fabricated with a cobalt-alloy (F-75) femoral and UHMWPE acetabular component for PMMA-cemented implantation in the rat. Mature Sprague-Dawley rats (n = 18) were maintained at a constant weight (450 g) and were trained to walk on a low-speed (6 m/min), horizontal treadmill, 15 min/day, 5 days/week. Each animal was randomly assigned to one of three surgical groups: functional, nonfunctional, and sham. The functional and nonfunctional groups underwent identical procedures, except that in the nonfunctional group the femoral head was placed so as to prevent articulation with the socket in the acetabular component. The sham procedure consisted of exposing and opening the joint capsule and the iliac wing without luxating the femoral head or severing the ligamentum teres. In addition, half of the animals in each group resumed exercising on the treadmill at 1 week after surgery. The implants were recovered at 2 months after surgery. The results show that the surgical procedure is feasible in the rat, the postoperative recovery was typical of that for THR, and the rats were able to resume their exercising regimens. Radiographic evaluation revealed that the majority of the sham and the nonfunctional animals had luxated hips, while the majority of the functional animals had reduced hips. Histological results were typical of THR in other species. The success of the surgical model suggests that the rat may be a feasible, reduced-cost alternative to other lab species in systemic, long-term THR studies.

Mineral apposition rates of human cancellous bone at the interface of porous coated implants

Human cancellous bone ingrowth studies were conducted on 19 consenting bilateral total knee arthroplasty (TKA) patients. Titanium porous coated cylinders were implanted into the medial femoral condyle of the contralateral knee during the first of two TKAs. Retrieval was performed at the time of the second TKA (6-131 weeks later), and fluorochrome analysis was conducted. Mean mineral apposition rates (MAR) at the interface measured 1.0 micron/day, whereas 4 mm away, the peripheral bone had a mean MAR of 0.8 micron/day. This represented a 25% acceleration in the interface bone remodeling rate when compared with the periphery (P < .05). This study showed the bone advanced appositionally at the interface at a rate of approximately 1 micron/day. Analysis showed that when bone was over 50 microns from the porous coating, bone ingrowth did not occur. These results emphasize the need for surgical precision and careful postoperative management to achieve bone ingrowth.