Osteoclasts degrade fibrinogen scaffolds and induce mesenchymal stem/stromal osteogenic differentiation

The Notch1 signaling pathway directly modulates the human RANKL-induced osteoclastogenesis

Notch signaling is an evolutionary conserved pathway with a key role in tissue homeostasis, differentiation and proliferation. It was reported that Notch1 receptor negatively regulates mouse osteoclast development and formation by inhibiting the expression of macrophage colony-stimulating factor in mesenchymal cells. Nonetheless, the involvement of Notch1 pathway in the generation of human osteoclasts is still controversial. Here, we report that the constitutive activation of Notch1 signaling induced a differentiation block in human mononuclear CD14+ cells directly isolated from peripheral blood mononuclear cells (PBMCs) upon in vitro stimulation to osteoclasts. Additionally, using a combined approach of single-cell RNA sequencing (scRNA-Seq) simultaneously with a panel of 31 oligo-conjugated antibodies against cell surface markers (AbSeq assay) as well as unsupervised learning methods, we detected four different cell stages of human RANKL-induced osteoclastogenesis after 5 days in which Notch1 signaling enforces the cell expansion of specific subsets. These cell populations were characterized by distinct gene expression and immunophenotypic profiles and active Notch1, JAK/STAT and WNT signaling pathways. Furthermore, cell-cell communication analyses revealed extrinsic modulators of osteoclast progenitors including the IL7/IL7R and WNT5a/RYK axes. Interestingly, we also report that Interleukin-7 receptor (IL7R) was a downstream effector of Notch1 pathway and that Notch1 and IL7R interplay promoted cell expansion of human RANKL-induced osteoclast progenitors. Taken together, these findings underline a novel cell pattern of human osteoclastogenesis, outlining the key role of Notch1 and IL-7R signaling pathways.

Assembling the Puzzle Pieces. Insights for in Vitro Bone Remodeling

As a highly dynamic organ, bone changes during throughout a person's life. This process is referred to as 'bone remodeling' and it involves two stages - a well-balanced osteoclastic bone resorption and an osteoblastic bone formation. Under normal physiological conditions bone remodeling is highly regulated that ensures tight coupling between bone formation and resorption, and its disruption results in a bone metabolic disorder, most commonly osteoporosis. Though osteoporosis is one of the most prevalent skeletal ailments that affect women and men aged over 40 of all races and ethnicities, currently there are few, if any safe and effective therapeutic interventions available. Developing state-of-the-art cellular systems for bone remodeling and osteoporosis can provide important insights into the cellular and molecular mechanisms involved in skeletal homeostasis and advise better therapies for patients. This review describes osteoblastogenesis and osteoclastogenesis as two vital processes for producing mature, active bone cells in the context of interactions between cells and the bone matrix. In addition, it considers current approaches in bone tissue engineering, pointing out cell sources, core factors and matrices used in scientific practice for modeling bone diseases and testing drugs. Finally, it focuses on the challenges that bone regenerative medicine is currently facing.

Compromised osteogenic effect of exosomes internalized by senescent bone marrow stem cells via endocytoses involving clathrin, macropinocytosis and caveolae

Stem cell senescence leads to progressive functional declines and disrupts the physiological homeostasis of bone environment. Stem cell-derived exosomes are emerging as promising therapeutical approaches to treat diverse aging-related osseous diseases. Herein, a previously reported osteoinductive exosome (OI-exo) was applied as a therapeutic agent for bone repair in aging individuals and its internalization mechanisms in senescent bone marrow stem cells (BMSCs) were explored. The results demonstrated that OI-exos derived from young BMSCs could partially rescue the proliferation, osteogenic differentiation and alleviate aging phenotypes in vitro. OI-exo-delivered hierarchical mesoporous bioactive glass (MBG) scaffold effectively promote in vivo bone formation in aging rat cranial defect model. However, the osteogenic effects of OI-exo both in vitro and in vivo were compromised in senescent individuals and for aging BMSCs compared to younger ones. This study revealed that non-senescent BMSCs internalized exosomes exclusively via clathrin-mediated endocytosis, while senescent BMSCs additionally evoked macropinocytosis and caveolae-mediated endocytosis to mediate the internalization of exosomes. The alteration of endocytic manner of senescent BMSCs and the involvement of macropinocytosis might be responsible for the compromised effects of therapeutical exosomes. The phenomena discovered in this study could also be extended to other scenarios where drugs or treatments exerted compromised effects in aging individuals. The influence of endocytic manner, avoidance of macropinocytosis-related negative effects should be taken into considerations in future therapeutic design for aging populations.

Magnesium incorporation in fibrinogen scaffolds promotes macrophage polarization towards M2 phenotype

The host inflammatory response to biomaterials conditions their capacity to promote tissue repair, and macrophage polarization shift from M1 to M2 is determinant in this process. Previous work showed that extracts of a combination between fibrinogen and metallic magnesium materials acted synergistically to reduce macrophage inflammatory phenotype. The hypothesis underlying the current work was that the ability of magnesium-modified fibrinogen scaffolds to modulate macrophage phenotype depends on the concentration of magnesium. Thus, Fibrinogen (Fg) scaffolds incorporating precise concentrations of magnesium sulfate (Mg: 0, 10, 25, 50 mM) were developed and characterized. Mg incorporation in Fg scaffolds increased surface charge, while porosity decreased with increasing Mg concentrations, but only Fg scaffolds with 10 mM of Mg (FgMg10) had significantly improved mechanical properties. Human macrophages cultured on FgMg10 scaffolds, showed increased M2 and decreased M1 polarization, when compared to those cultured on scaffolds with 0, 25 and 50 mM of Mg. Macrophage polarization results were independent of the anion used (chloride or sulfate). Macrophage modulation by FgMg10 scaffolds involved reduced NF-κB p65 nuclear translocation, and impacted production of pro-inflammatory mediators (e.g. IFNγ, IL-12, TNF-⍺, IP-10). Importantly, FgMg10 scaffolds implanted in vivo increased the expression of M2 marker CD163, in macrophages from inflammatory exudates, compared to Sham and Fg-implanted animals, increasing the M2:M1 ratio. A cytokine/chemokine array showed that, while both Fg and FgMg10 scaffolds decreased inflammatory mediators, only FgMg10 decreased IL-1β, IP-10, MIP-2, MDC and MIP-3⍺, compared to Sham-operated animals. This study demonstrated that incorporation of 10mM of Mg modulated inflammation, promoting M2 macrophage polarization in vitro and in vivo. STATEMENT OF SIGNIFICANCE: Developing biomaterials that can modulate inflammation and promote macrophage phenotype switch from M1 to M2 is crucial to promote a regenerative microenvironment. Our previous work showed that extracts of a combination between fibrinogen (Fg) and metallic magnesium (Mg) materials synergistically reduced macrophage pro-inflammatory phenotype. Herein, we tested the hypothesis that macrophage modulation was dependent on Mg concentration. A new family of Fg porous scaffolds incorporating different amounts of Mg (0, 10, 25 and 50 mM) was produced and characterized. We observed that only the combination of Fg scaffolds with 10 mM of Mg (FgMg10) significantly changed the scaffolds mechanical properties and directed macrophages towards a M2 phenotype, reducing the production of inflammatory mediators, both in vitro and in vivo.

Topographic Orientation of Scaffolds for Tissue Regeneration: Recent Advances in Biomaterial Design and Applications

Tissue engineering to develop alternatives for the maintenance, restoration, or enhancement of injured tissues and organs is gaining more and more attention. In tissue engineering, the scaffold used is one of the most critical elements. Its characteristics are expected to mimic the native extracellular matrix and its unique topographical structures. Recently, the topographies of scaffolds have received increasing attention, not least because different topographies, such as aligned and random, have different repair effects on various tissues. In this review, we have focused on various technologies (electrospinning, directional freeze-drying, magnetic freeze-casting, etching, and 3-D printing) to fabricate scaffolds with different topographic orientations, as well as discussed the physicochemical (mechanical properties, porosity, hydrophilicity, and degradation) and biological properties (morphology, distribution, adhesion, proliferation, and migration) of different topographies. Subsequently, we have compiled the effect of scaffold orientation on the regeneration of vessels, skin, neural tissue, bone, articular cartilage, ligaments, tendons, cardiac tissue, corneas, skeletal muscle, and smooth muscle. The compiled information in this review will facilitate the future development of optimal topographical scaffolds for the regeneration of certain tissues. In the majority of tissues, aligned scaffolds are more suitable than random scaffolds for tissue repair and regeneration. The underlying mechanism explaining the various effects of aligned and random orientation might be the differences in “contact guidance”, which stimulate certain biological responses in cells.

A standardized g-force allows the preparation of similar PRF qualities regardless of rotor angle

Platelet rich fibrin (PRF) is an autologous blood concentrate, that supports tissue regeneration. The effect of the centrifuge rotor angle in the fabrication of PRF is still not fully elucidated. The hypothesis of this study is: When applying the same g-force {relative centrifugal force (RCF)} and centrifugation time, PRF components and bioactivity are not modified using either a swing-out or fixed angle rotor. For this purpose, peripheral blood samples (five donors )were used to gain solid matrices (710 xg, 8 minutes) and liquid (44 xg, 8 minutes) PRF matrices using three different centrifuges (one fixed angle as a control; and two different swingout rotor centrifuges). The physical characteristics of the solid PRF were measured to evaluate the clot formation and cellular distribution. Liquid PRF was used to evaluate the cell number, bioactivity and influence on primary human osteoblasts and fibroblasts in vitro. Solid PRF clots were significantly larger in the group of fixed rotor centrifuges compared to either of the two evaluated swing-out rotor centrifuges. No differences were observed when evaluating the cellular distribution within the solid No statistically significant differences were documented in the cell's density in liquid PRF samples (platelets, lymphocytes, neutrophils, eosinophils, and basophils) among the differently gained PRF samples. No statistically significant differences were documented for the released growth factors (VEGF, EGF, TGF-β1) over 7 days. Primary human osteoblasts (pOBs) and primary human fibroblasts (pHFs) viability after treatment with PRF conditioned media showed no statistically significant differences between the evaluated groups. However, the number of adherent cells treated with PRF obtained with the use of the fixed angle rotor was significantly higher when compared to those treated with PRF obtained by using the swing-out rotors. The presented results confirmed that regardless of the centrifuge rotor used, the components and bioactivity of solid and liquid PRF matrices are modified by the applied RCF and centrifugation time. These findings are of great importance for highlighting the essential role of adapting the centrifugation protocols when using different centrifuges and to correctly report the used centrifugation protocols in scientific research to allow for reproducible results.

Recent Advances in Biopolymeric Composite Materials for Tissue Engineering and Regenerative Medicines: A Review

The polymeric composite material with desirable features can be gained by selecting suitable biopolymers with selected additives to get polymer-filler interaction. Several parameters can be modified according to the design requirements, such as chemical structure, degradation kinetics, and biopolymer composites' mechanical properties. The interfacial interactions between the biopolymer and the nanofiller have substantial control over biopolymer composites' mechanical characteristics. This review focuses on different applications of biopolymeric composites in controlled drug release, tissue engineering, and wound healing with considerable properties. The biopolymeric composite materials are required with advanced and multifunctional properties in the biomedical field and regenerative medicines with a complete analysis of routine biomaterials with enhanced biomedical engineering characteristics. Several studies in the literature on tissue engineering, drug delivery, and wound dressing have been mentioned. These results need to be reviewed for possible development and analysis, which makes an essential study.