Treatment of hydrogen bonding in SINDO1

A specific MNDO parameterization for water

A modified neglect of differential overlap has been parameterized specifically for water and its oligomers with the addition of polarization functions on both hydrogen and oxygen, Feynman dispersion, and a slight modification of the treatment of the hydrogen nucleus. The results show that it is possible to easily obtain good geometries and energies for hydrogen-bonded water aggregates. Data from the Benchmark Energy and Geometry Database water-cluster database were used to parameterize the new Hamiltonian for water clusters from the dimer to the decamer using MP2/aug-cc-pVDZ optimized geometries and CCSD(T)/CBS oligomerization energies. Seventy five oligomerization and rearrangement energies derived from the parameterization data are reproduced with a root mean-square error (RMSE) of 0.79 kcal mol^-1 and the geometries of 38 oligomers with an RMSE of 0.17 Å. Interestingly, the Feynman dispersion term adopts a role different from that intended and tunes the atomic polarizability. The implications of these results in terms of future dedicated neglect of diatomic differential overlap Hamiltonians and those that use force-field-like atom types are discussed.

Description of halogen bonding in semiempirical quantum-mechanical and self-consistent charge density-functional tight-binding methods

This article analyzes the ability of semiempirical quantum-mechanical methods (PM6 and PM7) and self-consistent charge density-functional tight-binding (SCC-DFTB) method DFTB3 to describe halogen bonds. Calculations of the electrostatic potential on the surface of molecules containing halogens show that the σ-hole could be described well in modified neglect of diatomic overlap-based methods. The situation is more complex in the case of DFTB3 where a simpler model is used for the electrostatics, but short-ranged effects are covered in the Hamiltonian. All these methods can thus capture the effects that, for example, define the geometry of halogen bonds. The interaction energies are, however, affected by generally underestimated repulsion, which has been addressed earlier by standalone empirical corrections. Another approach to correcting this issue in DFTB3 is presented here-a modification of the energies of d-orbitals on halogens yields better results than the empirical correction in DFTB3-D3X, although it remains difficult to describe halogen and hydrogen bonds simultaneously. © 2019 Wiley Periodicals, Inc.

Semiempirical Quantum Mechanical Methods for Noncovalent Interactions for Chemical and Biochemical Applications

Semiempirical (SE) methods can be derived from either Hartree-Fock or density functional theory by applying systematic approximations, leading to efficient computational schemes that are several orders of magnitude faster than ab initio calculations. Such numerical efficiency, in combination with modern computational facilities and linear scaling algorithms, allows application of SE methods to very large molecular systems with extensive conformational sampling. To reliably model the structure, dynamics, and reactivity of biological and other soft matter systems, however, good accuracy for the description of noncovalent interactions is required. In this review, we analyze popular SE approaches in terms of their ability to model noncovalent interactions, especially in the context of describing biomolecules, water solution, and organic materials. We discuss the most significant errors and proposed correction schemes, and we review their performance using standard test sets of molecular systems for quantum chemical methods and several recent applications. The general goal is to highlight both the value and limitations of SE methods and stimulate further developments that allow them to effectively complement ab initio methods in the analysis of complex molecular systems.

Improving intermolecular interactions in DFTB3 using extended polarization from chemical-potential equalization

Semi-empirical quantum mechanical methods traditionally expand the electron density in a minimal, valence-only electron basis set. The minimal-basis approximation causes molecular polarization to be underestimated, and hence intermolecular interaction energies are also underestimated, especially for intermolecular interactions involving charged species. In this work, the third-order self-consistent charge density functional tight-binding method (DFTB3) is augmented with an auxiliary response density using the chemical-potential equalization (CPE) method and an empirical dispersion correction (D3). The parameters in the CPE and D3 models are fitted to high-level CCSD(T) reference interaction energies for a broad range of chemical species, as well as dipole moments calculated at the DFT level; the impact of including polarizabilities of molecules in the parameterization is also considered. Parameters for the elements H, C, N, O, and S are presented. The Root Mean Square Deviation (RMSD) interaction energy is improved from 6.07 kcal/mol to 1.49 kcal/mol for interactions with one charged species, whereas the RMSD is improved from 5.60 kcal/mol to 1.73 for a set of 9 salt bridges, compared to uncorrected DFTB3. For large water clusters and complexes that are dominated by dispersion interactions, the already satisfactory performance of the DFTB3-D3 model is retained; polarizabilities of neutral molecules are also notably improved. Overall, the CPE extension of DFTB3-D3 provides a more balanced description of different types of non-covalent interactions than Neglect of Diatomic Differential Overlap type of semi-empirical methods (e.g., PM6-D3H4) and PBE-D3 with modest basis sets.

Quantum mechanical force field for water with explicit electronic polarization

A quantum mechanical force field (QMFF) for water is described. Unlike traditional approaches that use quantum mechanical results and experimental data to parameterize empirical potential energy functions, the present QMFF uses a quantum mechanical framework to represent intramolecular and intermolecular interactions in an entire condensed-phase system. In particular, the internal energy terms used in molecular mechanics are replaced by a quantum mechanical formalism that naturally includes electronic polarization due to intermolecular interactions and its effects on the force constants of the intramolecular force field. As a quantum mechanical force field, both intermolecular interactions and the Hamiltonian describing the individual molecular fragments can be parameterized to strive for accuracy and computational efficiency. In this work, we introduce a polarizable molecular orbital model Hamiltonian for water and for oxygen- and hydrogen-containing compounds, whereas the electrostatic potential responsible for intermolecular interactions in the liquid and in solution is modeled by a three-point charge representation that realistically reproduces the total molecular dipole moment and the local hybridization contributions. The present QMFF for water, which is called the XP3P (explicit polarization with three-point-charge potential) model, is suitable for modeling both gas-phase clusters and liquid water. The paper demonstrates the performance of the XP3P model for water and proton clusters and the properties of the pure liquid from about 900 × 10(6) self-consistent-field calculations on a periodic system consisting of 267 water molecules. The unusual dipole derivative behavior of water, which is incorrectly modeled in molecular mechanics, is naturally reproduced as a result of an electronic structural treatment of chemical bonding by XP3P. We anticipate that the XP3P model will be useful for studying proton transport in solution and solid phases as well as across biological ion channels through membranes.

Polarization-induced σ-holes and hydrogen bonding

The strong collinear polarizability of the A-H bond in A-H···B hydrogen bonds is shown to lead to an enhanced σ-hole on the donor hydrogen atom and hence to stronger hydrogen bonding. This effect helps to explain the directionality of hydrogen bonds, the well known cooperative effect in hydrogen bonding, and the occurrence of blue-shifting. The latter results when significant additional electron density is shifted into the A-H bonding region by the polarization effect. The shift in the A-H stretching frequency is shown to depend essentially linearly on the calculated atomic charge on the donor hydrogen for all donors in which A belongs to the same row of the periodic table. A further result of the polarization effect, which is also expected for other σ-hole bonds, is that the strength of the non-covalent interaction depends strongly on external electric fields.

Polarized Molecular Orbital Model Chemistry. I. Ab Initio Foundations

The objective of this paper is to examine the minimal requirements for obtaining semiquantitative polarizabilities of molecules, in order to provide a well-founded starting point for a new semiempirical molecular orbital formulation that is more suitable than presently available methods for simulating electronic polarization effects. For this purpose, we present polarizability calculations for 38 molecules with 36 basis sets, including many unconventional ones, and five semiempirical molecular orbital theories based on neglect of diatomic differential overlap. We conclude that two basis sets are particularly promising to serve as bases for semiempirical improvement, namely STO-3G(,P), in which diffuse p functions are added to all hydrogens, and 3-(21,3,21)G in which a minimal basis set is augmented with one extra s function on every atom. We especially recommend the former because all intra-atomic overlap integrals are zero by symmetry, which makes it a better candidate for neglect-of-differential-overlap treatments.

Semiempirical self-consistent polarization description of bulk water, the liquid-vapor interface, and cubic ice

We have applied an efficient electronic structure approach, the semiempirical self-consistent polarization neglect of diatomic differential overlap (SCP-NDDO) method, previously parametrized to reproduce properties of water clusters by Chang, Schenter, and Garrett [ J. Chem. Phys. 2008 , 128 , 164111 ] and now implemented in the CP2K package, to model ambient liquid water at 300 K (both the bulk and the liquid-vapor interface) and cubic ice at 15 and 250 K. The SCP-NDDO potential retains its transferability and good performance across the full range of conditions encountered in the clusters and the bulk phases of water. In particular, we obtain good results for the density, radial distribution functions, enthalpy of vaporization, self-diffusion coefficient, molecular dipole moment distribution, and hydrogen bond populations, in comparison to experimental measurements.

Self-consistent polarization neglect of diatomic differential overlap: application to water clusters

Semiempirical self-consistent field (SCF) methods based on the neglect of diatomic differential overlap (NDDO) formalism have the ability to treat the formation and breaking of chemical bonds but have been found to poorly describe hydrogen bonding and weak electrostatic complexes. In contrast, most empirical potentials are not able to describe bond breaking and formation but have the ability to add missing elements of hydrogen bonding by using classical electrostatic interactions. We present a new method which combines aspects of both NDDO-based SCF techniques and classical descriptions of polarization to describe the diffuse nature of the electronic wavefunction in a self-consistent manner. We develop the "self-consistent polarization neglect of diatomic differential overlap" (SCP-NDDO) theory with the additional description of molecular dispersion developed as a second-order perturbation theory expression. The current study seeks to model water-water interactions as a test case. To this end, we have parametrized the method to accurate ab initio complete basis set limit estimates of small water cluster binding energies of Xantheas and co-workers [J. Chem. Phys. 116, 1493 (2002); 120, 823 (2004)]. Overall agreement with the ab initio binding energies (n=2-6, and 8) is achieved with a rms error of 0.19 kcal/mol. We achieve noticeable improvements in the structure, vibrational frequencies, and energetic predictions of water clusters (n< or =21) relative to standard NDDO-based methods.

Extension of the Self-Consistent-Charge Density-Functional Tight-Binding Method: Third-Order Expansion of the Density Functional Theory Total Energy and Introduction of a Modified Effective Coulomb Interaction

The standard self-consistent-charge density-functional-tight-binding (SCC-DFTB) method (Phys. Rev. B 1998, 58, 7260) is derived by a second-order expansion of the density functional theory total energy expression, followed by an approximation of the charge density fluctuations by charge monopoles and an effective damped Coulomb interaction between the atomic net charges. The central assumptions behind this effective charge-charge interaction are the inverse relation of atomic size and chemical hardness and the use of a fixed chemical hardness parameter independent of the atomic charge state. While these approximations seem to be unproblematic for many covalently bound systems, they are quantitatively insufficient for hydrogen-bonding interactions and (anionic) molecules with localized net charges. Here, we present an extension of the SCC-DFTB method to incorporate third-order terms in the charge density fluctuations, leading to chemical hardness parameters that are dependent on the atomic charge state and a modification of the Coulomb scaling to improve the electrostatic treatment within the second-order terms. These modifications lead to a significant improvement in the description of hydrogen-bonding interactions and proton affinities of biologically relevant molecules.

Density Functional calculations for some hydrogen-bonded systems. Influence of a dielectric surrounding

We present Density Functional calculations for hydrogen-bonded systems with small, medium, and large association energies, in a vacuum and in a dielectric environment. The results are in reasonably good agreement with accurate ab initio results and available experimental data. They confirm that DFT is very promising for modeling liquid state properties. Keywords: hydrogen bond, Density Functional, cooperative effect, liquid state.