Force spectroscopy as a tool to investigate the properties of supported lipid membranes

Expanding the Potential of the Solvent-Assisted Method to Create Bio-Interfaces from Amphiphilic Block Copolymers

Artificial membranes, as materials with biomimetic properties, can be applied in various fields, such as drug screening or bio-sensing. The solvent-assisted method (SA) represents a straightforward method to prepare lipid solid-supported membranes. It overcomes the main limitations of established membrane preparation methods, such as Langmuir-Blodgett (LB) or vesicle fusion. However, it has not yet been applied to create artificial membranes based on amphiphilic block copolymers, despite their enhanced mechanical stability compared to lipid-based membranes and bio-compatible properties. Here, we applied the SA method on different amphiphilic di- and triblock poly(dimethylsiloxane)-block-poly(2-methyl-2-oxazoline) (PDMS-b-PMOXA) copolymers and optimized the conditions to prepare artificial membranes on a solid support. The real-time membrane formation, the morphology, and the mechanical properties have been evaluated by a combination of atomic force microscopy and quartz crystal microbalance. Then, selected biomolecules including complementary DNA strands and an artificial deallylase metalloenzyme (ADAse) were incorporated into these membranes relying on the biotin-streptavidin technology. DNA strands served to establish the capability of these synthetic membranes to interact with biomolecules by preserving their correct conformation. The catalytic activity of the ADAse following its membrane anchoring induced the functionality of the biomimetic platform. Polymer membranes on solid support as prepared by the SA method open new opportunities for the creation of artificial membranes with tailored biomimetic properties and functionality.

Mechanical properties of the high cholesterol-containing membrane: An AFM study

Cholesterol (Chol) content in most cellular membranes does not exceed 50 mol%, only in the eye lens's fiber cell plasma membrane, its content surpasses 50 mol%. At this high concentration, Chol induces the formation of pure cholesterol bilayer domains (CBDs), which coexist with the surrounding phospholipid-cholesterol domain (PCD). Here, we applied atomic force microscopy to study the mechanical properties of Chol/phosphatidylcholine membranes where the Chol content was increased from 0 to 75 mol%, relevant to eye lens membranes. The surface roughness of the membrane decreases with an increase of Chol content until it reaches 60 mol%, and roughness increases with a further increment in Chol content. We propose that the increased roughness at higher Chol content results from the formation of CBDs. Force spectroscopy on the membrane with Chol content of 50 mol% or lesser exhibited single breakthrough events, whereas two distinct puncture events were observed for membranes with the Chol content greater than 50 mol%. We propose that the first puncture force corresponds to the membranes containing coexisting PCD and CBDs. In contrast, the second puncture force corresponds to the "CBD water pocket" formed due to coexisting CBDs and PCD. Membrane area compressibility modulus (K_A) increases with an increase in Chol content until it reaches 60 mol%, and with further increment in Chol content, CBDs are formed, and K_A starts to decrease. Our results report the increase in membrane roughness and decrease K_A at very high Chol content (>60 mol%) relevant to the eye lens membrane.

AFM to Study Pore-Forming Proteins

Atomic force microscopy (AFM) is a form of contact microscopy that uses a very sharp tip to scan the surface of a sample. It provides a 3D image of the surface structure and in the force mode it can also be used to test the mechanical properties of the sample. AFM has been successfully applied to study the molecular mechanism of pore-forming proteins on model membranes. It gives information about both the structural reorganization of the membrane surface and the changes in the force required for membrane piercing upon incubation with this special type of proteins. Here we describe robust protocols to investigate the effect of pore-forming proteins in supported lipid bilayers .

Pulling lipid tubes from supported bilayers unveils the underlying substrate contribution to the membrane mechanics

Cell processes like endocytosis, membrane resealing, signaling and transcription involve conformational changes which depend on the chemical composition and the physicochemical properties of the lipid membrane. The better understanding of the mechanical role of lipids in cell membrane force-triggered and sensing mechanisms has recently become the focus of attention. Different membrane models and experimental methodologies are commonly explored. While general approaches involve controlled vesicle deformation using micropipettes or optical tweezers, due to the local and dynamic nature of the membrane, high spatial resolution atomic force microscopy (AFM) has been widely used to study the mechanical compression and indentation of supported lipid bilayers (SLBs). However, the substrate contribution remains unkown. Here, we demonstrate how pulling lipid tubes with an AFM out of model SLBs can be used to assess the nanomechanics of SLBs through the evaluation of the tube growing force (Ftube), allowing for very local evaluation with high spatial and force resolution of the lipid membrane tension. We first validate this approach to determine the contribution of different phospholipids, by varying the membrane composition, in both one-component and phase-segregated membranes. Finally, we successfully assess the contribution of the underlying substrate to the membrane mechanics, demonstrating that SLB models may represent an intermediate scenario between a free membrane (blebs) and a cytoskeleton supported membrane.

Toward More Free-Floating Model Cell Membranes: Method Development and Application to Their Interaction with Nanoparticles

Identifying the mechanisms of nanoparticle (NP) interactions with cell membranes is key to understanding potential NP cytotoxicity and applications as nanocarriers for targeted drug delivery. To elucidate these mechanisms of interaction, supported phospholipid bilayers (SPBs) are commonly used as models of cell membranes. However, SPBs are soft thin films, and, as such, their properties can be significantly affected by the underlying substrate. Free-floating cell membranes would be best modeled by weakly adhered SPBs; thus, we propose a method for tailoring the interfacial interaction of an electrically charged SPB-substrate system based on modulations in the solution chemistry. Using the dissipation signal of the quartz crystal microbalance with dissipation monitoring (QCM-D), we show that the method can be used to tailor SPB-substrate interactions without the loss of its structural integrity. To demonstrate the application of the method, SPBs are exposed to cationic and anionic polystyrene latex NPs. These studies reveal that the bilayer response to the modulations in the interfacial interaction with its underlying substrate can be used as a sensitive tool to probe the integrity of SPBs upon exposure to NPs. As expected, anionic NPs tend to impart no significant damage to the anionic bilayers, whereas cationic NPs can be detrimental to bilayer integrity. This is the first report of a QCM-D based method to probe bilayer integrity following exposure to NPs. Importantly, the degree of SPB interaction with its underlying substrate is shown to be a critical factor in the kinetics of bilayer disruption by cationic NPs, whereby weakly adhered bilayers are prone to significantly faster breakup. Since free-floating cell membranes are better represented by a weakly adhered SPB, the results of this work critically influence paradigms in experimental studies involving SPBs as models for cell membranes.

Strong hydrophobic interaction between graphene oxide and supported lipid bilayers revealed by AFM

Understanding the interaction between graphene oxide (GO) and lipid membranes is of great importance for its various applications in biotechnology. Here, we investigated the interaction between GO and charged supported lipid bilayers (SLBs) by in situ atomic force microscope (AFM) imaging. It was found that GO could peel off a single layer of positively charged SLBs and deposited on the hydrophobic part of the remaining sublayer. Then free lipid molecules would assemble on GO surface and formed 1.5 bilayers in a lipid-GO-lipid manner. For negatively charged lipid bilayers, however, GO deposited to the SLBs only when its concentration was very high. These results indicate that, in addition to electrostatic interaction, the hydrophobic interaction plays an important role when GO sheets deposit onto the charged lipid bilayers, and should be helpful to understand possible cytotoxicity and antibiosis of graphene-related nanomaterials. Microsc. Res. Tech. 79:721-726, 2016. © 2016 Wiley Periodicals, Inc.

Supported Lipid Bilayers for the Generation of Dynamic Cell-Material Interfaces

Supported lipid bilayers (SLB) offer unique possibilities for studying cellular membranes and have been used as a synthetic architecture to interact with cells. Here, the state-of-the-art in SLB-based technology is presented. The fabrication, analysis, characteristics and modification of SLBs are described in great detail. Numerous strategies to form SLBs on different substrates, and the means to patteren them, are described. The use of SLBs as model membranes for the study of membrane organization and membrane processes in vitro is highlighted. In addition, the use of SLBs as a substratum for cell analysis is presented, with discrimination between cell-cell and cell-extracellular matrix (ECM) mimicry. The study is concluded with a discussion of the potential for in vivo applications of SLBs.

Atomic Force Microscopy Imaging and Force Spectroscopy of Supported Lipid Bilayers

Atomic force microscopy (AFM) is a versatile, high-resolution imaging technique that allows visualization of biological membranes. It has sufficient magnification to examine membrane substructures and even individual molecules. AFM can act as a force probe to measure interactions and mechanical properties of membranes. Supported lipid bilayers are conventionally used as membrane models in AFM studies. In this protocol, we demonstrate how to prepare supported bilayers and characterize their structure and mechanical properties using AFM. These include bilayer thickness and breakthrough force. The information provided by AFM imaging and force spectroscopy help define mechanical and chemical properties of membranes. These properties play an important role in cellular processes such as maintaining cell hemostasis from environmental stress, bringing membrane proteins together, and stabilizing protein complexes.

Influence of polar and nonpolar carotenoids on structural and adhesive properties of model membranes

Carotenoids, which are known primarily for their photoprotective and antioxidant properties, may also strongly influence the physical properties of membranes. The localization and orientation of these pigments in the lipid bilayer depends on their structure and is determined by their interactions with lipid molecules. This affects both phase behavior and the mechanical properties of membranes. Differential scanning calorimetry (DSC) and atomic force microscopy (AFM) allowed us to gain a direct insight into the differences between the interaction of the non-polar β-carotene and polar zeaxanthin embedded into DPPC liposomes. DSC results showed that zeaxanthin, having polar ionone rings, interacts more strongly with the membrane lipids than β-carotene. The decrease in molar heat capacity by a factor of 2 with a simultaneous broadening of the main phase transition (gel-to-liquid crystalline phase transition) as compared to the two other systems studied suggests some increased length of the coupled interactions between the polar xanthophyll and lipids. Long-distance interactions lead to the formation of larger clusters which may exhibit higher flexibility than small clusters when only short-distance interactions occur. AFM experiments show that adhesive forces are 2 and 10 times higher for DPPC membranes enriched in β-carotene and zeaxanthin, respectively, than those observed for an untreated system. Temperature dependent measurements of adhesion revealed that subphases can be formed in the gel lamellar state of DPPC bilayers. The presence of the non-polar carotenoid enhanced the effect and even a bifurcation of the substates was detected within a temperature range of 30.0-32.5°C prior to pretransition. It is the first time when the presence of subphases has been demonstrated. This knowledge can be helpful in better understanding the functioning of carotenoids in biological membranes. AFM seem to be a very unique and sensitive method for detecting such fine changes in the lipid bilayers.

Formation and characterization of supported lipid bilayers containing phosphatidylinositol-4,5-bisphosphate and cholesterol as functional surfaces

Solid-supported lipid bilayers (SLBs) mimicking a biological membrane are commonly used to investigate lipid-lipid or lipid-protein interactions. Simple binary or ternary lipid systems are well established, whereas more complex model membranes containing biologically important signaling lipids such as phosphatidylinositol-4,5-bisphosphate (PI(4,5)P2) and cholesterol have not been extensively described yet. Here we report the generation of such bilayers and their relevant biophysical properties and in particular the accessibility of PI(4,5)P2 for protein binding. Ternary mixtures of POPC with 20% cholesterol and either 3 or 5 mol % dioleoyl-phosphatidylinositol-4,5-bisphosphate were probed by employing the quartz crystal microbalance and atomic force microscopy. We show that these mixtures form homogeneous solid-supported bilayers that exhibit no intrinsic phase separation and are characterized by long-term stability (>8 h). Bilayers were formed in a pH-dependent manner and were characterized by the accessibility of PI(4,5)P2 on the SLB surface as shown by the interaction with the PI(4,5)P2 binding domain of the cortical membrane-cytoskeleton linker protein ezrin. A time-dependent reduction of PI(4,5)P2 levels in the upper leaflet of SLBs was observed, which could be effectively inhibited by the incorporation of a negatively charged lipid such as phosphatidylserine. Furthermore, quartz crystal microbalance measurements revealed that cholesterol affects bilayer adsorption to the solid support.

Cholesterol drives aβ(1-42) interaction with lipid rafts in model membranes

The molecular mechanism at the basis of the neurodegenerative process related to Alzheimer's disease (AD) is triggered by the local composition of the neural plasma membrane. The role of cholesterol is controversial. In this investigation the interaction of the AD peptide amyloid-beta (1-42) with model membranes containing lipid rafts has been investigated by atomic force microscopy techniques. Supported lipid membranes made of phospholipids/sphingomyelin/cholesterol have been investigated as a function of the molar content of cholesterol, in a range spanning the phase diagram of the lipid system. The administration of amyloid-beta induced a phase reorganization of the lipid domains, when the cholesterol molar fraction was below 5%. At the same time, a mechanical destabilization and an appreciable thinning of the membrane induced by the peptide were detected. The major interaction was observed in the presence of the gel phase Lβ, and was enhanced by a low cholesterol amount. With the appearance of the liquid ordered phase Lo, the effect was hindered. At high cholesterol content (20% mol), no detectable effects in the bilayer morphology or in its mechanical stability were recorded. These findings give new insights on the molecular mechanism of the amyloid/membrane interaction, highlighting the peculiar role of cholesterol.

Importance of phospholipid bilayer integrity in the analysis of protein-lipid interactions

The integrity of supported phospholipid bilayer membranes is of crucial importance for the investigation of lipid-protein interactions. Therefore we recorded the formation of supported membranes on SiO2 and mica by quartz crystal microbalance and controlled the integrity by atomic force microscopy. This study aims to analyze how membrane defects affect protein-lipid interactions. The experiments focused on a lipid mixture of POPC/DOPC/Chol/POPS/PI(4,5)P2 (37:20:20:20:3) and the binding of the peripheral membrane associated protein annexin A2. We found that formation of a continuous undisturbed bilayer is an indispensable precondition for a reliable determination and quantification of lipid-protein-interactions. If membrane defects were present, protein adsorption causes membrane disruption and lipid detachment on a support thus leading to false determination of binding constants. Our results obtained for PI(4,5)P2 and cholesterol containing supported membranes yield new knowledge to construct functional surfaces that may cover nanoporous substrates, form free standing membranes or may be used for lab-on-a-chip applications.

Cardiolipin effects on membrane structure and dynamics

Cardiolipin (CL) is a lipid with unique properties solely found in membranes generating electrochemical potential. It contains four acyl chains and tends to form nonlamellar structures, which are believed to play a key role in membrane structure and function. Indeed, CL alterations have been linked to disorders such as Barth syndrome and Parkinson's disease. However, the molecular effects of CL on membrane organization remain poorly understood. Here, we investigated the structure and physical properties of CL-containing membranes using confocal microscopy, fluorescence correlation spectroscopy, and atomic force microscopy. We found that the fluidity of the lipid bilayer increased and its mechanical stability decreased with CL concentration, indicating that CL decreases the packing of the membrane. Although the presence of up to 20% CL gave rise to flat, stable bilayers, the inclusion of 5% CL promoted the formation of flowerlike domains that grew with time. Surprisingly, we often observed two membrane-piercing events in atomic force spectroscopy experiments with CL-containing membranes. Similar behavior was observed with a lipid mixture mimicking the mitochondrial outer membrane composition. This suggests that CL promotes the formation of membrane areas with apposed double bilayers or nonlamellar structures, similar to those proposed for mitochondrial contact sites. All together, we show that CL induces membrane alterations that support the role of CL in facilitating bilayer structure remodeling, deformation, and permeabilization.

Different effects of Alzheimer's peptide Aβ(1-40) oligomers and fibrils on supported lipid membranes

Beta-amyloid (1-40) is one of the two most abundant species of amyloid-beta peptides present as fibrils in the extracellular senile plaques in the brain of Alzheimer's patients. Recently, the molecular aggregates constituting the early stage of fibril formation, i.e., oligomers and protofibrils, have been investigated as the main responsible for amyloid-beta cytotoxic effect. The molecular mechanism leading to neurodegeneration is still under debate, and it is common opinion that it may reside in the interaction between amyloid species and the neural membrane. In this investigation Atomic Force Microscopy and spectroscopy have been used to understand how structural (and mechanical) properties of POPC/POPS lipid bilayers, simulating the phospholipid composition and negative net charge of neuritic cell membranes, are influenced by the interaction with Aβ(1-40), in different stages of the peptide aggregation. Substantial differences in the damage caused to the lipid bilayers have been observed, confirming the toxic effect exerted especially by Aβ(1-40) prefibrillar oligomers.

Morphological and nanomechanical behavior of supported lipid bilayers on addition of cationic surfactants

The addition of surfactants to lipid bilayers is important for the modulation of lipid bilayer properties (e.g., in protein reconstitution and development of nonviral gene delivery vehicles) and to provide insight on the properties of natural biomembranes. In this work, the thermal behavior, organization, and nanomechanical stability of model cationic lipid-surfactant bilayers have been investigated. Two different cationic surfactants, hexadecyltrimethylammonium bromide (CTAB) and a novel derivative of the amino acid serine (Ser16TFAc), have been added (up to 50 mol %) to both liposomes and supported lipid bilayers (SLBs) composed by the zwitterionic phospholipid DPPC. The thermal phase behavior of mixed liposomes has been probed by differential scanning calorimetry (DSC), and the morphology and nanomechanical properties of mixed SLBs by atomic force microscopy-based force spectroscopy (AFM-FS). Although DSC thermograms show different results for the two mixed liposomes, when both are deposited on mica substrates similar trends on the morphology and the mechanical response of the lipid-surfactant bilayers are observed. DSC thermograms indicate microdomain formation in both systems, but while CTAB decreases the degree of organization on the liposome bilayer, Ser16TFAc ultimately induces the opposite effect. Regarding the AFM-FS studies, they show that microphase segregation occurs for these systems and that the effect is dependent on the surfactant content. In both SLB systems, different microdomains characterized by their height and breakthrough force Fb are formed. The molecular organization and composition is critically discussed in the light of our experimental results and literature data on similar lipid-surfactant systems.

Toxic effects of expanded ataxin-1 involve mechanical instability of the nuclear membrane

Ataxin 1 (ATXN1) is the protein involved in spinocerebellar ataxia type 1, one of nine dominantly inherited neurodegenerative diseases triggered by polyglutamine expansion. One of the isolated polyglutamine tracts properties is to interact with lipid bilayers. Here we used a multidisciplinary approach to test whether one of the mechanisms responsible for neuronal degeneration involves the destabilization of the nuclear membrane. We thus analyzed the interaction between ATXN1 and lipid membranes, both on cellular models and on artificial lipid bilayers, comparing pathological expanded polyglutamine and histidine interrupted non-harmful polyglutamine tracts of the same length. The toxicity of the different constructs was tested in transiently transfected COS1 cells. Cells expressing pathological ATXN1 presented a significantly higher frequency of anomalous nuclei with respect to those expressing non-harmful ATXN1. Immunofluorescence and electron microscopy showed severe damage in the nuclear membrane of cells expressing the pathological protein. Atomic force microscopy on artificial membranes containing interrupted and non-interrupted partial ATXN1 peptides revealed a different arrangement of the peptides within the lipid bilayer. Force-distance measurements indicated that membrane fragility increases with the lengthening of the uninterrupted glutamine. Transmembrane electrical measurements were performed on artificial bilayers and on the inner nuclear membrane of ATXN1 full length transfected cells. Both artificial lipid bilayers and cellular models demonstrated the dynamic appearance of ionic pathways. Uninterrupted polyglutamines showed not only a larger ionic flow, but also an increase in the single event conductance. Collectively, our results suggest that expanded ATXN1 may induce unregulated ionic pathways in the nuclear membrane, causing severe damage to the cell.

Atomic force microscopy force mapping in the study of supported lipid bilayers

Investigating the structural and mechanical properties of lipid bilayer membrane systems is vital in elucidating their biological function. One route to directly correlate the morphology of phase-segregated membranes with their indentation and rupture mechanics is the collection of atomic force microscopy (AFM) force maps. These force maps, while containing rich mechanical information, require lengthy processing time due to the large number of force curves needed to attain a high spatial resolution. A force curve analysis toolset was created to perform data extraction, calculation and reporting specifically in studying lipid membrane morphology and mechanical stability. The procedure was automated to allow for high-throughput processing of force maps with greatly reduced processing time. The resulting program was successfully used in systematically analyzing a number of supported lipid membrane systems in the investigation of their structure and nanomechanics.

A facile approach for assembling lipid bilayer membranes on template-stripped gold

Lipid vesicles are designed with functional chemical groups to promote vesicle fusion on template-stripped gold (TS Au) surfaces that does not spontaneously occur on unfunctionalized Au surfaces. Three types of vesicles were exposed to TS Au surfaces: (1) vesicles composed of only 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipids; (2) vesicles composed of lipid mixtures of 2.5 mol % of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-poly(ethylene glycol)-2000-N-[3-(2-pyridyldithio)propionate] (DSPE-PEG-PDP) and 97.5 mol % of POPC; and (3) vesicles composed of 2.5 mol % of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(poly(ethylene glycol))-2000] (DSPE-PEG) and 97.5 mol % POPC. Atomic force microscopy (AFM) topography and force spectroscopy measurements acquired in a fluid environment confirmed tethered lipid bilayer membrane (tLBM) formation only for vesicles composed of 2.5 mol % DSPE-PEG-PDP/97.5 mol % POPC, thus indicating that the sulfur-containing PDP group is necessary to achieve tLBM formation on TS Au via Au-thiolate bonds. Analysis of force-distance curves for 2.5 mol % DSPE-PEG-PDP/97.5 mol % POPC tLBMs on TS Au yielded a breakthrough distance of 4.8 ± 0.4 nm, which is about 1.7 nm thicker than that of POPC lipid bilayer membrane formed on mica. Thus, the PEG group serves as a spacer layer between the tLBM and the TS Au surface. Fluorescence microscopy results indicate that these tLBMs also have greater mechanical stability than solid-supported lipid bilayer membranes made from the same vesicles on mica. The described process for assembling stable tLBMs on Au surfaces is compatible with microdispensing used in array fabrication.