Fiber-based anterior cruciate ligament model for biomechanical simulations

Biomechanical modeling of spinal ligaments: finite element analysis of L4-L5 spinal segment

The complex mechanical structure of spine is usually simplified in finite element (FE) modes. In this study, different 3D models of L4-L5 spinal segment distinguished by their ligament modelling were developed (1D truss, 2D shell and 3D space truss elements). All models could be considered validated with respect to range of motion and intradiscal pressure, although their ligament stresses/forces were substantially different. The models with 2D shell and 3D space truss ligaments showed the stress distribution and identified the potential failure/injury locations in ligaments. The model with 3D space truss ligaments showed the stress/force direction (representing collagen fiber directions).

Deconstructing the Anterior Cruciate Ligament: What We Know and Do Not Know About Function, Material Properties, and Injury Mechanics

Anterior cruciate ligament (ACL) injury is a common and potentially catastrophic knee joint injury, afflicting a large number of males and particularly females annually. Apart from the obvious acute injury events, it also presents with significant long-term morbidities, in which osteoarthritis (OA) is a frequent and debilitative outcome. With these facts in mind, a vast amount of research has been undertaken over the past five decades geared toward characterizing the structural and mechanical behaviors of the native ACL tissue under various external load applications. While these efforts have afforded important insights, both in terms of understanding treating and rehabilitating ACL injuries; injury rates, their well-established sex-based disparity, and long-term sequelae have endured. In reviewing the expanse of literature conducted to date in this area, this paper identifies important knowledge gaps that contribute directly to this long-standing clinical dilemma. In particular, the following limitations remain. First, minimal data exist that accurately describe native ACL mechanics under the extreme loading rates synonymous with actual injury. Second, current ACL mechanical data are typically derived from isolated and oversimplified strain estimates that fail to adequately capture the true 3D mechanical response of this anatomically complex structure. Third, graft tissues commonly chosen to reconstruct the ruptured ACL are mechanically suboptimal, being overdesigned for stiffness compared to the native tissue. The net result is an increased risk of rerupture and a modified and potentially hazardous habitual joint contact profile. These major limitations appear to warrant explicit research attention moving forward in order to successfully maintain/restore optimal knee joint function and long-term life quality in a large number of otherwise healthy individuals.

Can a tibial tunnel in ACL surgery be placed anatomically without impinging on the femoral notch? A risk factor analysis

PURPOSE

To analyze anatomical risk factors and surgical technique dependent variables, which determine the risk for femoral notch impingement in anatomically correct placed tibial tunnels for anterior cruciate ligament (ACL) surgery.

METHODS

Twenty fresh frozen adult human knee specimens under the age of 65 years were used. Digital templates mimicking a tibial tunnel aperture at the tibia plateau were designed for different tibial tunnel diameters and different drill-guide angles. The centres of these templates were placed over the geometric centre of the native tibial ACL footprint. The distances between the anterior borders of the templates and the anterior borders of the footprints (graft free zone) were measured and compared. Furthermore, anatomic risk factors for femoral notch impingement were determined.

RESULTS

The graft free zone was statistically significantly longer for larger drill-guide angles compared to smaller drill-guide angles (p < 0.00001). Furthermore, 8 mm diameter tibial tunnels had a statistically significant larger graft free zone compared to 10-mm-diameter tibial tunnels (p < 0.00001). For the 10 mm diameter tibial tunnels with drill-guide angle of 45°, 9 out of 20 knees (45 %) were "at risk" for notching and 4 out of 20 knees (20 %) had "definite" notching. For 10-mm tunnels with drill-guide angle of 45°, a risk for notching was associated with smaller tibial ACL footprint (p < 0.05).

CONCLUSION

If a perfect centrally positioned tibial tunnel is drilled, a real risk for femoral notch impingement exists depending on the size of the tibial ACL footprint and surgery-related factors. Therefore, in anatomical tibial tunnel placement in single bundle ACL reconstruction surgery, particular attention should be paid to size of the tunnel and drill-guide angle to minimize the risk of femoral notch impingement.

A Model of Stress and Strain in the Interosseous Ligament of the Forearm Based on Fiber Network Theory

Fiber network theory was developed to describe cloth, a thin material with strength in the fiber directions. The interosseous ligament (IOL) of the forearm is a broad, thin ligament with highly aligned fibers. The objectives of this study were to develop a model of the stress and strain distributions in the IOL, based on fiber network theory, to compare the strains from the model with the experimentally measured strains, and to evaluate the force distribution across the ligament fibers from the model. The geometries of the radius, ulna, and IOL were reconstructed from CT scans. Position and orientation of IOL insertion sites and force in the IOL were measured during a forearm compression experiment in pronation, neutral rotation, and supination. An optical image-based technique was used to directly measure strain in two regions of the IOL in neutral rotation. For the network model, the IOL was represented as a parametric ruled three-dimensional surface, with rulings along local fiber directions. Fiber strains were calculated from the deformation field, and fiber stresses were calculated from the strains using average IOL tensile properties from a previous study. The in situ strain in the IOL was assumed uniform and was calculated so that the net force predicted by the network model in neutral rotation matched the experimental result. The net force in the IOL was comparable to experimental results in supination and pronation. The model predicted higher stress and strain in fibers near the elbow in neutral rotation, and higher stresses in fibers near the wrist in supination. Strains in neutral forearm rotation followed the same trends as those measured experimentally. In this study, a model of stress and strain in the IOL utilizing fiber network theory was successfully implemented. The model illustrates variations in the stress and strain distribution in the IOL. This model can be used to show surgeons how different fibers are taut in different forearm rotation positions—this information is important for understanding the biomechanical role of the IOL and for planning an IOL reconstruction.

Thermal effects after anterior cruciate ligament shrinkage using radiofrequency technology: a porcine cadaver study

The effects of thermal energy on an anterior cruciate ligament (ACL) are unknown. This study was undertaken to know the immediate and direct effects of thermocoagulation on normal ACL. Thermocoagulation was generated by monopolar radiofrequency (RF) at 67 degrees C and 40 W of energy and applied with use of a commercial jig in a porcine cadaveric model, and biomechanical and histological changes were evaluated immediately. Thermocoagulation caused significant shrinkage of ACL without immediate effects on ligament biomechanical properties, including stiffness and maximal failure force. However, histological analysis demonstrated a decrease in number of dense elongated cells and blood vessels within the epiligamentous tissue, loss of areolar spaces, decrement in the periodicity of collagen waveform, and shortening and pyknotic nuclear changes of cells within the fascicular region. RF-generated thermocoagulation resulted in ACL shortening with significant changes on histological findings but not on initial biomechanical properties.

Anatomy and biomechanics of the anterior cruciate ligament

This article reviews the literature on embryology, anatomy, function, and biomechanics to define the properties of the native ACL. The discussion focuses on the ligamentous architecture and gross anatomy of the ACL including its femoral and tibial insertions as well as its midsubstance passing through the intercondylar fossa. Biomechanical modeling, mechanical and structural properties, and function of the ACL as a primary and secondary stabilizer under non-weightbearing and weightbearing conditions are described.