Determination of chloramphenicol in aquatic products by graphene-based SPE coupled with HPLC-MS/MS

Biological toxicity effects of florfenicol on antioxidant, immunity and intestinal flora of zebrafish (Danio rerio)

The accumulation of antibiotics in the aquatic environment is increasingly becoming a risk to the health of aquatic animal. The purpose of this study was to investigate the acute and chronic toxicity of florfenicol (FF) to zebrafish. A 56-day chronic toxicity test followed a 96-h acute toxicity test. The chronic toxicity test was divided into five FF concentration groups: 0 mg/L (C), 5 mg/L (T5), 10 mg/L (T10), 20 mg/L (T20) and 40 mg/L (T40). Each group had five replicates, with 20 Zebrafish per replicate. The acute toxicity test results showed that the 96 h-LC50 of FF was greater than 2000 mg/L, indicating low toxicity. The exposure concentrations of FF exceeding 20 mg/L can cause oxidative damage to the liver and gill tissues of fish, leading to the accumulation of oxidative products in the tissues and severe damage to antioxidant capacity. The reactive oxygen species (ROS) generated by severe oxidative stress activates the toll like receptors (TLR) pathway, inducing inflammation in the liver and gill tissues, stimulating the upregulation of inflammatory factor expression levels, and leading to immune system disorders. FF exposure at a concentration of 5 mg/L can lead to a significant decrease in the diversity and evenness of gut microbiota. The concentration of FF in water bodies above 37.52 mg/L poses a potential risk to aquatic products.

An entropy driven catalytic reaction powered DNA motor for simultaneous detection of ochratoxin A and chloramphenicol in food

An entropy driven catalytic reaction powered DNA motor was proposed for simultaneous detection of ochratoxin A (OTA) and chloramphenicol (CAP) in food. The dumbbell hairpin structure was formed by the two aptamers of OTA and CAP. The dumbbell hairpin can be opened by the interaction of OTA and CAP with their aptamers. The tails of the end of dumbbell hairpin sequence can induce the entropy driven catalytic reactions on the AuNPs, causing the sustained releasing of the fluorophore labeled DNA sequences. The recovery of fluorescent intensities can be used for quantitative detection of OTA and CAP. The limit of detection reached 2 pM for OTA and 6 pM for CAP respectively, which was great improved by entropy driven amplification of the self-powdered DNA motor. This strategy is simple and sensitive and only needs one-step operation. It exhibits promising potentiality in food quality control and food security supervision.

A simple and sensitive flow injection chemiluminescence immunoassay for chloramphenicol based on gold nanoparticle-loaded enzyme

A simple and ultrasensitive flow injection chemiluminescence competitive immunoassay based on gold nanoparticle-loaded enzyme for the detection of chloramphenicol (CAP) residues in shrimp and honey has been developed. Due to their good biocompatibility and large specific surface area, carboxylic resin beads can be used as solid phase carriers to immobilize more coating antigens (Ag). In addition, gold nanoparticles could provide an effective matrix for loading more CAP antibody and horseradish peroxidase, which would effectively catalyze the system of luminol-p-iodophenol (PIP)-H₂ O₂ . A competitive immunoassay strategy was used for detection of CAP, in which CAP in the sample would compete with the coating Ag for the limited antibodies, leading to a chemiluminescence (CL) signal decrease with increase in CAP concentration. A wide linear range 0.001-10 ng ml^-1 (R² = 0.9961) was obtained under optimized conditions, and the detection limit (3σ) was calculated to be 0.33 pg ml^-1 . This method was also been successfully applied to determine CAP in shrimp and honey samples. The immunosensor proposed in this study not only has the advantages of high sensitivity, wider linear range, and satisfactory stability, but also expands the application of flow injection CL immunoassay in antibiotic detection.

Covalently bonded aptamer-functionalised magnetic mesoporous carbon for high-efficiency chloramphenicol detection

A novel aptamer-modified magnetic mesoporous carbon was prepared to develop a specific and sensitive magnetic solid-phase extraction method through combination with ultra-high performance liquid chromatography-tandem mass spectrometry for the analysis chloramphenicol in complex samples. More specifically, the chloramphenicol aptamer-modified Mg/Al layered double hydroxide magnetic mesoporous carbon was employed as a novel magnetic solid-phase extraction sorbent for analyte enrichment and sample clean-up. The extraction solvent, extraction time, desorption solvent, and desorption time were investigated. It was found that the mesoporous structure and aptamer-based affinity interactions resulted in acceptable selective recognition and a good chemical stability toward trace amounts of chloramphenicol. Upon combination with the ultra-high performance liquid chromatography-tandem mass spectrometry technique, a specific and sensitive recognition method was developed with a low limit of detection (0.94 pmol/L, S/N = 3) for chloramphenicol analysis. The developed method was successfully employed for the determination of chloramphenicol in complex serum, milk powders, fish and chicken samples, giving recoveries of 87.0-107% with relative standard deviations of 3.1-9.7%.

Quantification and Analysis of Trace Levels of Phenicols in Feed by Liquid Chromatography–Mass Spectrometry

A sensitive and reliable method using liquid chromatography–negative electrospray ionization mass spectrometry was developed for the simultaneous determination of chloramphenicol, florfenicol, and thiamphenicol at trace levels in animal feed. The analytes were extracted from grinded feed with ethyl acetate. Further the ethyl acetate was evaporated, residue resuspended in Milli-Q water, defatted with n-hexane, and solid phase extracted using BondELUT C18 cartridges. Separation was carried out on a C6 phenyl column with a mobile phase consisting of 0.1% formic acid in Milli-Q water and acetonitrile. The detector response was linear over the tested concentration range from 100 to 1000 µg kg−1. The recovery values for all analytes in feed were higher than 79% with RSD for repeatability and reproducibility in the ranges of 4.5–10.9% and 8.4–13.5%, respectively. CCα and CCβ varied between 76.8 and 86.1 µg kg−1, and between 111.3 and 159.9 µg kg−1, respectively. The results showed that this method is effective for the quantification of phenicols in non-target feed.

Multiple signal amplification chemiluminescence immunoassay for chloramphenicol using functionalized SiO2 nanoparticles as probes and resin beads as carriers

A novel, rapid and convenient competitive immunoassay for ultrasensitive detection of chloramphenicol residues in shrimp and honey was established combined with flow injection chemiluminescence. The carboxylic resin beads were used as solid phase carriers to load with more coating antigen due to their larger specific surface area and good biocompatibility. The surface of the silica dioxide nanoparticles was modified with aldehyde group to combine with more horseradish peroxidase and the chloramphenicol antibody. There was a competitive process between the chloramphenicol in solution and the immobilized coating antigen to combine with the limited binding site of antibody to form the immunocomplex. Silica dioxide nanoparticles played an important role in enhancing chemiluminescence signal, because the horseradish peroxidase on SiO₂ effectively catalyzed the system of luminol-PIP-H₂O₂. Under optimal conditions, the chemiluminescence intensity decreased linearly with the logarithm of the chloramphenicol concentration in the range of 0.0001 to 100 ng mL^-1 and the detection limit (3σ) was 0.033 pg mL^-1. This immunosensor demonstrated acceptable stability, high specificity and reproducibility. The horseradish peroxidase-silica dioxide nanoparticle-chloramphenicol antibody complex successfully prepared in this article was firstly applied to the detection of chloramphenicol, and had extremely important meanings for the application of nanoparticles and enzymatic catalysis in the field of chemiluminescence.

Tungsten disulfide (WS2) nanosheet-based photoelectrochemical aptasensing of chloramphenicol

A method is described for photoelectrochemical determination of chloramphenicol (CLOA). It is based on the use of (a) aptamers protected with photoactive WS₂ nanosheets, and (b) DNase I-assisted target recycling. The DNA aptamer without label was employed for recognition of CLOA. In the absence of CLOA, the aptamer is adsorbed on the surface of WS₂. This leads to a decrease of photocurrent due to the steric-hindrance effect of aptamer DNA. The adsorption of WS₂ also protects the aptamer from digestion by DNase. In the presence of CLOA, the aptamer will be desorbed from the WS₂ surface due to formation of an aptamer/CLOA conjugate. This results in an increased photocurrent due to a decreased amount of aptamer DNA on the electrode surface. The increase of photocurrent can be further improved by applying DNase triggered catalytic recycling of CLOA. Under optimal experimental conditions, the response is linear 10 pM - 10 nM CLOA concentration range, with a 3.6 pM lower detection limit (at 3σ). This method is acceptably selective, accurate and stable. It was applied to the determination of CLOA in spiked milk samples and gave satisfactory results. Graphical abstract A simple and sensitive photoelectrochemical apta-biosensor was fabricated for chloramphenicol detection. In this work, WS₂ nanosheets were employed as photoactive material, and DNase I catalytic chloramphenicol recycling strategy was adopted to amplify the detection signal.

Graphene-Derivatized Silica Composite as Solid-Phase Extraction Sorbent Combined with GC-MS/MS for the Determination of Polycyclic Musks in Aqueous Samples

Polycyclic musks (PCMs) have recently received growing attention as emerging contaminants because of their bioaccumulation and potential ecotoxicological effects. Herein, an effective method for the determination of five PCMs in aqueous samples is presented. Reduced graphene oxide-derivatized silica (rGO@silica) particles were prepared from graphene oxide and aminosilica microparticles and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. PCMs were preconcentrated using rGO@silica as the solid-phase extraction sorbent and quantified by gas chromatography–tandem mass spectrometry. Several experimental parameters, such as eluent, elution volume, sorbent amount, pH, and sample volume were optimized. The correlation coefficient (R) ranged from 0.9958 to 0.9992, while the limits of detection and quantitation for the five PCMs were 0.3–0.8 ng/L and 1.1–2.1 ng/L, respectively. Satisfactory recoveries were obtained for tap water (86.6–105.9%) and river water samples (82.9–107.1%), with relative standard deviations <10% under optimal conditions. The developed method was applied to analyze PCMs in tap and river water samples from Beijing, China. Galaxolide (HHCB) and tonalide (AHTN) were the main PCM components detected in one river water sample at concentrations of 18.7 for HHCB, and 11.7 ng/L for AHTN.

Synthesis and absorption performance of core–shell magnetic polymers for solid phase extraction and detection of glibenclamide in hypoglycemic health products

Synthesis of GO-modified magnetic polymers for fast separation and effective enrichment of trace glibenclamide in hypoglycemic health products.

A simple, fast and sensitive screening LC-ESI-MS/MS method for antibiotics in fish

The objective of this study was to develop and validate a fast, sensitive and simple liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) method for the screening of six classes of antibiotics (aminoglycosides, beta-lactams, macrolides, quinolones, sulfonamides and tetracyclines) in fish. Samples were extracted with trichloroacetic acid. LC separation was achieved on a Zorbax Eclipse XDB C18 column and gradient elution using 0.1% heptafluorobutyric acid in water and acetonitrile as mobile phase. Analysis was carried out in multiple reaction monitoring mode via electrospray interface operated in the positive ionization mode, with sulfaphenazole as internal standard. The method was suitable for routine screening purposes of 40 antibiotics, according to EC Guidelines for the Validation of Screening Methods for Residues of Veterinary Medicines, taking into consideration threshold value, cut-off factor, detection capability, limit of detection, sensitivity and specificity. Real fish samples (n=193) from aquaculture were analyzed and 15% were positive for enrofloxacin (quinolone), one of them at a higher concentration than the level of interest (50µgkg^-1), suggesting possible contamination or illegal use of that antibiotic.

A triple-amplification SPR electrochemiluminescence assay for chloramphenicol based on polymer enzyme-linked nanotracers and exonuclease-assisted target recycling

The present study aimed to explore a novel triple-amplification electrochemiluminescence (ECL) assay for detecting of chloramphenicol (CAP). This strategy was based on single-stranded DNA-binding protein (SSB) and horseradish peroxidase (HRP) enzyme-linked polymer (EnVision reagent, EV) labeled on Au nanoparticles (EV-Au-SSB) as nanotracer and exonuclease-assisted target recycling. The composite probes were prepared via immunoreactions between the CdS nanocrystal (CdS NC)-functionalized partial complementary DNA and aptamer (CdSNCs/Apt-ssDNA1) as capture probes, and EV-Au-SSB as nanotracer. When the composite probe solution co-existed with CAP and Exo I, the aptamer on the capture probes preferentially combined with CAP, and then CAP-Apt and nanotracer complex were released into the solution. Subsequently, Exo I in the solution could further digest the CAP-Apt from the 3'-end of the aptamer and release CAP, which could participate in further reaction with the probes. It was worth mentioning that EV contained a large number of HRPs on its dendritic chain. In the EV-Au-SSB, Au could enhance ECL intensity of CdS NCs by surface plasmon resonance. What's more, HRPs on EV could catalyze the reaction of H2O2, which could obviously enhance ECL intensity of CdS NCs. This study demonstrated excellent performance of the triple-amplification ECL assay, which makes this aptasensor system suitable and promising for the practical application of CAP residues in fish samples. Moreover, the assay might provide a promising avenue to develop efficient aptasensors to determine small-molecule harmful substances in environmental monitoring and food safety.

A homogeneous and "off-on" fluorescence aptamer-based assay for chloramphenicol using vesicle quantum dot-gold colloid composite probes

In this work, a novel homogeneous and signal "off-on" aptamer based fluorescence assay was successfully developed to detect chloramphenicol (CAP) residues in food based on the fluorescence resonance energy transfer (FRET). The vesicle nanotracer was prepared through labeling single stranded DNA binding protein (SSB) on limposome-CdSe/ZnS quantum dot (SSB/L-QD) complexes. It was worth mentioning that the signal tracer (SSB/L-QD) with vesicle shape, which was fabricated being encapsulated with a number of quantum dots and SSB. The nanotracer has excellent signal amplification effects. The vesicle composite probe was formed by combining aptamer labeled nano-gold (Au-Apt) and SSB/L-QD. Which based on SSB's specific affinity towards aptamer. This probe can't emit fluoresce which is in "off" state because the signal from SSB/L-QD as donor can be quenched by the Au-aptas acceptor. When CAP was added in the composite probe solution, the aptamer on the Au-Apt can be preferentially bounded with CAP then release from the composite probe, which can turn the "off" signal of SSB/L-QD tracer into "on" state. The assay indicates excellent linear response to CAP from 0.001 nM to 10 nM and detection limit down to 0.3 pM. The vesicle probes with size of 88 nm have strong signal amplification. Because a larger number of QDs can be labeled inside the double phosphorus lipid membrane. Besides, it was employed to detect CAP residues in the milk samples with results being agreed well with those from ELISA, verifying its accuracy and reliability.

Fluorescent aptasensor for chloramphenicol detection using DIL-encapsulated liposome as nanotracer

A novel fluorescence aptasensor was successfully developed to respond to chloramphenicol (CAP) in food based on magnetic aptamer-liposome vesicle probe. In order to fabricate it, aptamer labeled on functionalized magnetic beads (MB) was firstly employed as capture adsorbent (MB-Apt), then SSB (single-stranded DNA binding protein) and DIL (1,1'-dioctadecyl-3,3,3',3'-tetramethyl-indocarbocyanineperchlorate) coimmobilized liposomes (SSB/DIL-Lip) was employed as vesicle signal tracer. The composite vesicle probe is formed between SSB/DIL-Lip and MB-Apt based on SSB's specific recognition towards aptamer on vesicle signal tracer. Upon the vesicle probe solution reacted with CAP, the aptamer on the magnetic beads preferentially bounded with CAP, and then released SSB/DIL-Lip vesicle signal tracer in the supernatant after magnetic separation. The released tracer can emit fluorescence which was correspondence with the concentration of the analyte. At the optimum conditions, the aptasensor exhibited a good linear response for CAP detection in the range of 0.003-10nM with a detection limit of 1pM. Importantly, the methodology was further validated for analyzing CAP in fish samples with consistent results obtained by ELISA kit, thus providing a promising approach for quantitative monitoring of CAP and significant anti-interference ability in food safety.

Graphene-Based Materials as Solid Phase Extraction Sorbent for Trace Metal Ions, Organic Compounds, and Biological Sample Preparation

Graphene is a new carbon-based material that is of interest in separation science. Graphene has extraordinary properties including nano size, high surface area, thermal and chemical stability, and excellent adsorption affinity to pollutants. Its adsorption mechanisms are through non-covalent interactions (π-π stacking, electrostatic interactions, and H-bonding) for organic compounds and covalent interactions for metal ions. These properties have led to graphene-based material becoming a desirable adsorbent in a popular sample preparation technique known as solid phase extraction (SPE). Numerous studies have been published on graphene applications in recent years, but few review papers have focused on its applications in analytical chemistry. This article focuses on recent preconcentration of trace elements, organic compounds, and biological species using SPE-based graphene, graphene oxide, and their modified forms. Solid phase microextraction and micro SPE (µSPE) methods based on graphene are discussed.

Applications of graphene and related nanomaterials in analytical chemistry

Graphene and its related materials remain a very bright and exciting prospect in analytical chemistry.

Fabrication of graphene/Fe3O4@polythiophene nanocomposite and its application in the magnetic solid-phase extraction of polycyclic aromatic hydrocarbons from environmental water samples

Polythiophene (PT) was used as a surface modifier of graphene/Fe3O4 (G/Fe3O4) composite to increase merit of it, and also overcome some limitations and disadvantages of using G/Fe3O4 alone as solid phase extraction (SPE) sorbent. An in-situ chemical polymerization method was employed to prepare G/Fe3O4@PT nanocomposites. Application of this newly designed material in the magnetic SPE (MSPE) of polycyclic aromatic hydrocarbons (PAHs), as model analytes, in the environmental water samples was investigated. The characterization of the hybrid material was performed using transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray analysis, Fourier transform-infrared (FT-IR) spectroscopy and vibrating sample magnetometry. Seven important parameters, affecting the extraction efficiency of PAHs, including: amount of adsorbent, adsorption and desorption times, type and volume of the eluent solvent, initial sample volume and salt content of the sample were evaluated. The optimum extraction conditions were obtained as: 4 min for extraction time, 20 mg for sorbent amount, 100mL for initial sample volume, toluene as desorption solvent, 0.6 mL for desorption solvent volume, 6 min for desorption time and 30% (w/v) for NaCl concentration. Good performance data were obtained at the optimized conditions. Detection limits were in the range of 0.009-0.020 μg L(-1) in the real matrix. The calibration curves were linear over the concentration ranges from 0.03 to 80 μg L(-1) with correlation coefficients (R(2)) between 0.995 and 0.998 for all the analytes. Relative standard deviations were ranged from 4.3 to 6.3%. Appropriate recovery values, in the range of 83-107%, were also obtained for the real sample analysis.

Graphene-based materials: fabrication and application for adsorption in analytical chemistry

Graphene, a single layer of carbon atoms densely packed into a honeycomb crystal lattice with unique electronic, chemical, and mechanical properties, is the 2D allotrope of carbon. Owing to the remarkable properties, graphene and graphene-based materials are likely to find potential applications as a sorbent in analytical chemistry. The current review focuses predominantly on the recent development of graphene-based materials and demonstrates their enhanced performance in adsorption of organic compounds, metal ions, and solid phase extraction as well as in separation science since mostly 2012.

Atmospheric pressure ionization-tandem mass spectrometry of the phenicol drug family

In this work, the mass spectrometry behaviour of the veterinary drug family of phenicols, including chloramphenicol (CAP) and its related compounds thiamphenicol (TAP), florfenicol (FF) and FF amine (FFA), was studied. Several atmospheric pressure ionization sources, electrospray (ESI), atmospheric pressure chemical ionization and atmospheric pressure photoionization were compared. In all atmospheric pressure ionization sources, CAP, TAP and FF were ionized in both positive and negative modes; while for the metabolite FFA, only positive ionization was possible. In general, in positive mode, [M + H](+) dominated the mass spectrum for FFA, while the other compounds, CAP, TAP and FF, with lower proton affinity showed intense adducts with species present in the mobile phase. In negative mode, ESI and atmospheric pressure photoionization showed the deprotonated molecule [M-H](-), while atmospheric pressure chemical ionization provided the radical molecular ion by electron capture. All these ions were characterized by tandem mass spectrometry using the combined information obtained by multistage mass spectrometry and high-resolution mass spectrometry in a quadrupole-Orbitrap instrument. In general, the fragmentation occurred via cyclization and losses or fragmentation of the N-(alkyl)acetamide group, and common fragmentation pathways were established for this family of compounds. A new chemical structure for the product ion at m/z 257 for CAP, on the basis of the MS(3) and MS(4) spectra is proposed. Thermally assisted ESI and selected reaction monitoring are proposed for the determination of these compounds by ultra high-performance liquid chromatography coupled to tandem mass spectrometry, achieving instrumental detection limits down to 0.1 pg.