Layer-by-Layer (LbL) Surface Augmented Modification of Poly(Styrene/Divinylbenzene)High Internal Phase Emulsion for Carbon Dioxide Capture

In this study, we used amines electrolyte solution with layer-by-layer (LbL) technique to modify and increase the CO₂ adsorption capacity of highly porous polymer from high internal phase emulsion template polymer. This perspective presents the extraordinary versatility of emulsion templating polymerization, which has emerged with the growing numbers of HIPE systems and modification. In this study, we used polyHIPE prepared from styrene (S) and divinylbenzene (DVB) with varying ratios; 80:20, 20:80, and 0:100 to improve the surface area, thermal properties, and mechanical properties of the materials. Furthermore, the surface of the polyHIPE was modified by LbL technique to increase the adsorption efficiency. This technique consisted of two main layers, the primary layer of poly(diallyldimethylammonium chloride) (PDADMAC) and polystyrene sulfonate (PSS) and the secondary layer, which was the CO₂ adsorbing layer, of polyethylene imine (PEI) or tetraethylene pentamine (TEPA). Poly(S/DVB)HIPE modified by PEI terminated as the secondary coating showed the highest CO₂ adsorption capacity, with up to 42% (from 0.71 to 1.01 mmol/g). The amine-multilayered modified material still possessed an open cell structure, since the solution did not block the pore structure of the poly(S/DVB)HIPE and was suitable for being used as an adsorbent in adsorption technology.

Effect of Cosurfactant on Structure and Properties of Polymerized High Internal Phase Emulsions (PolyHIPEs)

Porous polymerized high internal phase emulsion (polyHIPE) monoliths are synthesized by using Span 80 with different cosurfactants. The results reveal that the void size can be reduced by employing cosurfactants, except for Tween 20. Furthermore, the openness of polyHIPEs changes by using different cosurfactants or by varying their concentration. To further investigate the effect of cosurfactants, we perform rheology measurements on the interface of the aqueous and oil phase. This study demonstrates the important role of interfacial elasticity in the successful preparation of polyHIPEs with different morphologies. Additionally, this study suggests that the increase in interfacial elasticity hinders the formation of interconnections between pores, known as windows. Finally, the compression test is performed to investigate the effect of the pore structure on the mechanical properties.

Basic Principles of Emulsion Templating and Its Use as an Emerging Manufacturing Method of Tissue Engineering Scaffolds

Tissue engineering (TE) aims to regenerate critical size defects, which cannot heal naturally, by using highly porous matrices called TE scaffolds made of biocompatible and biodegradable materials. There are various manufacturing techniques commonly used to fabricate TE scaffolds. However, in most cases, they do not provide materials with a highly interconnected pore design. Thus, emulsion templating is a promising and convenient route for the fabrication of matrices with up to 99% porosity and high interconnectivity. These matrices have been used for various application areas for decades. Although this polymer structuring technique is older than TE itself, the use of polymerised internal phase emulsions (PolyHIPEs) in TE is relatively new compared to other scaffold manufacturing techniques. It is likely because it requires a multidisciplinary background including materials science, chemistry and TE although producing emulsion templated scaffolds is practically simple. To date, a number of excellent reviews on emulsion templating have been published by the pioneers in this field in order to explain the chemistry behind this technique and potential areas of use of the emulsion templated structures. This particular review focusses on the key points of how emulsion templated scaffolds can be fabricated for different TE applications. Accordingly, we first explain the basics of emulsion templating and characteristics of PolyHIPE scaffolds. Then, we discuss the role of each ingredient in the emulsion and the impact of the compositional changes and process conditions on the characteristics of PolyHIPEs. Afterward, current fabrication methods of biocompatible PolyHIPE scaffolds and polymerisation routes are detailed, and the functionalisation strategies that can be used to improve the biological activity of PolyHIPE scaffolds are discussed. Finally, the applications of PolyHIPEs on soft and hard TE as well as in vitro models and drug delivery in the literature are summarised.

Emulsion-derived hierarchically porous polystyrene solid foam for oil removal from aqueous environment

A novel co-stabilizer consisting of Span 20 and Fe₃O₄ particles stabilized the emulsions well and generated the hierarchically porous Fe₃O₄/polystyrene foams.