Surface-confined photopolymerization of single- and mixed-monomer systems to tailor the wettability of poly(L-lactide) film

Strategies for directing cells into building functional hearts and parts

This review presents the current state-of-the-art, emerging directions and future trends to direct cells for building functional heart parts.

Hydrogel Layers on the Surface of Polyester-Based Materials for Improvement of Their Biointeractions and Controlled Release of Proteins

The modification of bioresorbable polyester surfaces in order to alter their biointeractions presents an important problem in biomedical polymer science. In this study, the covalent modification of the surface of poly(lactic acid)-based (PLA-based) films with poly(acryl amide) and sodium alginate hydrogels was performed to change the non-specific polyester interaction with proteins and cells, as well as to make possible the covalent attachment of low-molecular weight ligands and to control protein release. The effect of such modification on the film surface properties was studied. Parameters such as swelling, water contact angle, surface area, and binding capacity of low-molecular weight substances were evaluated and compared. The comparative study of adsorption of model protein (BSA) on the surface of non-modified and modified films was investigated and the protein release was evaluated. Cell viability on the surface of hydrogel-coated films was also tested. The developed approach could be applied for the modification of PLA-based scaffolds for tissue engineering and will be further studied for molecular-imprinting of biomolecules on the surface of polyester-based materials for control of biointeractions.

Strategies for the chemical and biological functionalization of scaffolds for cardiac tissue engineering: a review

The development of biomaterials for cardiac tissue engineering (CTE) is challenging, primarily owing to the requirement of achieving a surface with favourable characteristics that enhances cell attachment and maturation. The biomaterial surface plays a crucial role as it forms the interface between the scaffold (or cardiac patch) and the cells. In the field of CTE, synthetic polymers (polyglycerol sebacate, polyethylene glycol, polyglycolic acid, poly-l-lactide, polyvinyl alcohol, polycaprolactone, polyurethanes and poly(N-isopropylacrylamide)) have been proven to exhibit suitable biodegradable and mechanical properties. Despite the fact that they show the required biocompatible behaviour, most synthetic polymers exhibit poor cell attachment capability. These synthetic polymers are mostly hydrophobic and lack cell recognition sites, limiting their application. Therefore, biofunctionalization of these biomaterials to enhance cell attachment and cell material interaction is being widely investigated. There are numerous approaches for functionalizing a material, which can be classified as mechanical, physical, chemical and biological. In this review, recent studies reported in the literature to functionalize scaffolds in the context of CTE, are discussed. Surface, morphological, chemical and biological modifications are introduced and the results of novel promising strategies and techniques are discussed.

Nondestructive covalent "grafting-from" of poly(lactide) particles of different geometries

A nondestructive "grafting-from" method has been developed using poly(lactide) (PLA) particles of different shapes as substrates and three hydrophilic monomers as grafts. Irregularly shaped particles and spheres of PLA were covalently surface functionalized using a versatile method of photoinduced free radical polymerization. The preservation of the molecular weight of the PLA particle bulk and the retention of the original particle shape confirmed the negligible effect of the grafting method. The changes in surface composition were determined by FTIR for both spherical and irregular particles and by XPS for the irregular particles showing the versatility of the method. Changes in the surface morphology of the PLA spherical particles were observed using microscopy techniques showing a full surface coverage of one of the grafted monomers. The method is applicable to a wide set of grafting monomers and provides a permanent alteration of the surface chemistry of the PLA particles creating hydrophilic PLA surfaces in addition to creating sites for further modification and drug delivery in the biomedical fields.

Cellular responses to electrospun membranes made from blends of PLLGA with PEG and PLLGA-b-PEG

Control of cellular responses is crucial for the use of electrospun membranes in biomedical applications, including tissue engineering or biomedical devices. However, it is still unclear whether adhesion and proliferation of fibroblasts is stimulated or inhibited on polyethylene glycol (PEG)-modified electrospun membranes. In this study, poly(L-lactide-co-glycolide) (PLLGA)-PEG copolymer and pure PEG were blended with PLLGA, and then electrospun onto nonwoven membranes. The effects of blending of PLLGA-PEG or pure PEG on the adsorption of proteins, and further on the adhesion and proliferation of L929 fibroblasts on the electrospun membranes were investigated. Addition of PLLGA-PEG or PEG significantly improved the hydrophilicity of the electrospun membranes. Pure PEG had no obvious effects on the growth of L929 fibroblasts; in contrast, PLLGA-PEG significantly inhibited the adsorption of proteins and the proliferations of the cells on the electrospun membranes. In response to diminished protein adsorption, mRNA expression of genes related to cell adhesion and migration was up-regulated. The limited effects of pure PEG were probably caused by its preferential dissolution, whereas membrane-confined PLLGA-PEG displayed excellent performance on the inhibition of protein adsorption and cell proliferation.

Electrografted aryl diazonium initiators for surface-confined photopolymerization: a new approach to designing functional polymer coatings

This article reports on the preparation of polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(2-hydroxyethyl methacrylate) (PHEMA) ultrathin grafts on gold substrates modified by 4-benzoylphenyl (BP) moieties derived from the electroreduction of the parent diazonium salt BF(4)(-), (+)N(2)-C(6)H(4)-CO-C(6)H(5) (DS). The grafted organic species -C(6)H(4)-CO-C(6)H(5) was found to be very effective in the surface-initiating photopolymerization (SIPP) of vinylic monomers in the presence of an aromatic tertiary amine co-initiator acting as a hydrogen donor. This novel tandem diazonium salt electroreduction/SIPP was found to be effective in grafting PS, PMMA, and PHEMA from the surface of gold-coated silicon wafers. The polymer films were characterized in terms of chemical structure and wettability by infrared reflection absorption spectroscopy and X-ray photoelectron spectroscopy, and contact angle measurements, respectively. The polymer grafts were further evaluated as adsorbents for bovine serum albumin (BSA) used as a model protein. It was found gold/PHEMA resisted BSA adsorption because of its hydrophilic character, whereas PS and PMMA grafts adsorbed BSA via interfacial hydrophobic interaction. The XPS-determined extent of adsorbed BSA was found to increase linearly with the hydrophobic character of the polymer grafts as measured by water contact angles. This work shows that this novel tandem diazonium salt electroreduction/SIPP is a facile, ultrafast, efficient protocol for grafting polymer chains to surfaces. It broadens the enormous possibilities offered by aryl diazonium salts to generate functional organic coatings.