Stepped association of comb‐like and stimuli‐responsive graft chitosan copolymer synthesized using ATRP and active ester conjugation methods

Targeted delivery of Nitric Oxide triggered by α-Glucosidase to Ameliorate NSAIDs-induced Enteropathy

Nonsteroidal anti-inflammatory drugs (NSAIDs) increase risks of severe small intestinal injuries. Development of effective therapeutic strategies to overcome this issue remains challenging. Nitric oxide (NO) as a gaseous mediator plays a protective role in small intestinal injuries. However, small intestine-specific delivery systems for NO have not been reported yet. In this study, we reported a small intestine-targeted polymeric NO donor (CS-NO) which was synthesized by covalent grafting of α-glucosidase-activated NO donor onto chitosan. In vitro and in vivo experiments demonstrated that CS-NO could be activated by intestinal α-glucosidase to release NO in the small intestine. Pre-treatment of mice with CS-NO significantly alleviated small intestinal damage induced by indomethacin, as demonstrated by down-regulation of the levels of pro-inflammatory cytokines and chemokines CXCL1/KC. Moreover, CS-NO also attenuated indomethacin-induced gut barrier dysfunction as evidenced by up-regulation of the levels of tight junction proteins and restoration of the levels of goblet cells and MUC2 production. Meanwhile, CS-NO effectively restored the defense function of Paneth cells against pathogens in small intestine. Our present study paves the way to develop NO-based therapeutic strategy for NSAIDs-induced small intestinal injuries.

Determination of ofloxacin in the presence of dopamine, paracetamol, and caffeine using a glassy carbon electrode based on carbon nanomaterials and gold nanoparticles

A new electrode was prepared based on functionalized graphene and gold nanoparticles dispersed in a chitosan film. Such an electrochemical sensor determines ofloxacin in the presence of dopamine, paracetamol, and caffeine. Characterization (morphological and electrochemical) was done using scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. The sensor design improved the analytical signal, the electrochemical activity, and the electron transfer rate. Ofloxacin was determined by square-wave voltammetry, with a linear concentration range of 0.10-4.9 μmol L^-1 (r = 0.999, LOD = 12 nmol L^-1). The proposed sensor showed good repeatability and selectivity and was applied successfully to the determination of ofloxacin in pharmaceutical formulations, synthetic urine, and water river samples. The proposed method proved to be excellent; therefore, it is an alternative method for the determination of ofloxacin.

Porous BMTTPA-CS-GO nanocomposite for the efficient removal of heavy metal ions from aqueous solutions

In this study, a stable, cost-effective and environmentally friendly porous 2,5-bis(methylthio)terephthalaldehyde-chitosan-grafted graphene oxide (BMTTPA-CS-GO) nanocomposite was synthesized by covalently grafting BMTTPA-CS onto the surfaces of graphene oxide and used for removing heavy metal ions from polluted water. According to well-established Hg2+-thioether coordination chemistry, the newly designed covalently linked stable porous BMTTPA-CS-GO nanocomposite with thioether units on the pore walls greatly increases the adsorption capacity of Hg2+ and does not cause secondary pollution to the environment. The results of sorption experiments and inductively coupled plasma mass spectrometry measurements demonstrate that the maximum adsorption capacity of Hg2+ on BMTTPA-CS-GO at pH 7 is 306.8 mg g-1, indicating that BMTTPA-CS-GO has excellent adsorption performance for Hg2+. The experimental results show that this stable, environmentally friendly, cost-effective and excellent adsorption performance of BMTTPA-CS-GO makes it a potential nanocomposite for removing Hg2+ and other heavy metal ions from polluted water, and even drinking water. This study suggests that covalently linked crucial groups on the surface of carbon-based materials are essential for improving the adsorption capacity of adsorbents for heavy metal ions.

Studies on non-gelatinous & thermo-responsive chitosan with the N-isopropylacrylamide by RAFT methodology for control release of levofloxacin

The non-gelatinous and thermo-responsive properties were introduced in chitosan by incorporating the chain of poly(N-isopropylacrylamide) via reversible addition-fragmentation chain transfer (RAFT) polymerization. To achieve this, the reaction was carried out at 80 °C by modifying the chitosan(CS) with RAFT agent as a macroinitiator (CS-RAFT), where the amine group of CS was protected with phthalic anhydride and then reacted with 4-cyano-4-[(dodecyl sulfanyl thiocarbonyl)sulfanyl]-pentanoic acid (CDSTSP) to form CS-RAFT agent. Further, the addition of NIPAAm chains onto CS-RAFT was carried out in N,N'-dimethylformamide (DMF) solvent by using 2,2'-azobisisobutyronitrile (AIBN) as an initiator in N₂ atmosphere. The controlled addition of NIPAAm chains on to CS was confirmed by ¹H NMR spectroscopy, further, a kinetic study was performed to get the characteristic features of the RAFT reaction. The product was characterized by ¹H NMR, FT-IR, UV-Visible spectroscopy, XRD, SEM, and TGA analyses. The product in aqueous solution showed LCST at 2.0 mg/mL on 33 ± 0.1 °C. Further, beads were prepared with the sodium alginate and loaded the water-soluble levofloxacin drug (60% w/w loading was achieved). The drug delivery process was studied in-vitro at 37 ± 0.1 °C & pH 7.4, which shown controlled release of drug up to 32 h and it was 71% of the loaded levofloxacin.

Recent advances in RDRP-modified chitosan: a review of its synthesis, properties and applications

RDRP modified Chitosan exhibits improved hydrophobic, cationic and anionic properties, which make them more useful in diversified applications. This review delineates the recent advancement in RDRP-modified chitosan and their properties.

Synthesis and Characterization of Stimuli-Responsive Poly(2-dimethylamino-ethylmethacrylate)-Grafted Chitosan Microcapsule for Controlled Pyraclostrobin Release

Controllable pesticide release in response to environmental stimuli is highly desirable for better efficacy and fewer adverse effects. Combining the merits of natural and synthetic polymers, pH and temperature dual-responsive chitosan copolymer (CS-g-PDMAEMA) was facilely prepared through free radical graft copolymerization with 2-(dimethylamino) ethyl 2-methacrylate (DMAEMA) as the vinyl monomer. An emulsion chemical cross-linking method was used to expediently fabricate pyraclostrobin microcapsules in situ entrapping the pesticide. The loading content and encapsulation efficiency were 18.79% and 64.51%, respectively. The pyraclostrobin-loaded microcapsules showed pH-and thermo responsive release. Microcapsulation can address the inherent limitation of pyraclostrobin that is photo unstable and highly toxic on aquatic organisms. Compared to free pyraclostrobin, microcapsulation could dramatically improve its photostability under ultraviolet light irradiation. Lower acute toxicity against zebra fish on the first day and gradually similar toxicity over time with that of pyraclostrobin technical concentrate were in accordance with the release profiles of pyraclostrobin microcapsules. This stimuli-responsive pesticide delivery system may find promising application potential in sustainable plant protection.

pH-Responsive polymers

This review summarizes pH-responsive monomers, polymers and their derivative nano- and micro-structures including micelles, cross-linked micelles, microgels and hydrogels.

An efficient route to synthesize thermoresponsive molecular bottlebrushes of poly[o-aminobenzyl alcohol-graft-poly(N-isopropylacrylamide)]

The thermoresponsive molecular bottlebrushes of poly[o-aminobenzyl alcohol-graft-poly(N-isopropylacrylamide)] [P(oABA-g-PNIPAM)] were synthesized and their characteristic thermoresponse was demonstrated.

Modification of chitosan with polystyrene and poly(n-butyl acrylate) via nitroxide-mediated polymerization and grafting from approach in homogeneous media

Nitroxide-mediated polymerization was used to graft modify solubilized chitosan, allowing the reaction to be performed homogeneously.

Modification of polysaccharides through controlled/living radical polymerization grafting-towards the generation of high performance hybrids

This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well-defined polysaccharide-based macromolecules (block and graft copolymers) and graft-functionalized polysaccharide surfaces as well as the applications of these polysaccharide-based hybrids are extensively discussed.

RECENT ADVANCES IN GRAPHENE-BASED NANOMATERIALS FOR BIOMEDICAL APPLICATIONS

Graphene, a two-dimensional nanomaterial reported for the first time in 2004, has been widely investigated for its novel physicochemical properties and potential applications. This review selectively summarizes the recent progress in using graphene-based nanomaterials for various biomedical applications. In particular, graphene-based sensors and biosensors, which are classified according to different sensing mechanisms and targets, are thoroughly discussed. Next, the utilization of graphene as nanocarriers for drug delivery, gene delivery and nanomedicine are demonstrated for potential cancer therapies. Finally, other graphene-based matrices, nanoscaffolds, and composites, which are used in bioapplications, are presented, followed by conclusions and perspective.

Hierarchical self-assembly of polyhedral oligomeric silsesquioxane end-capped stimuli-responsive polymer: from single micelle to complex micelle

Responsive polymeric micelles have been widely studied because of their potential use in nanocontainers and nanocarriers. In this study, polyhedral oligomeric silsesquioxane (POSS) end-capped poly[2-(dimethylamino)ethyl methacrylate] (POSS-PDMAEMA), a stimuli-responsive organic-inorganic hybrid polymer, was synthesized via atom transfer radical polymerization (ATRP) using POSS-Br as a macroinitiator. The self-assembly behaviors of POSS-PDMAEMA in aqueous solution were studied by fluorescence probe, transmission electron microscopy (TEM), dynamic light scattering (DLS), high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD). The results revealed two self-assembly processes of POSS-PDMAEMA. First they self-assembled into a single micelle with the POSS molecules forming a crystal core and the PDMAEMA chains stretching as a corona. Then the single micelles, as building blocks, were able to reversibly form a hierarchical micelle-on-micelle structure (complex micelle) under external stimuli.

Chitosan-functionalized graphene oxide as a nanocarrier for drug and gene delivery

The covalent functionalization of graphene oxide (GO) with chitosan (CS) is successfully accomplished via a facile amidation process. The CS-grafted GO (GO-CS) sheets consist of about 64 wt.% CS, which imparts them with a good aqueous solubility and biocompatibility. Additionally, the physicochemical properties of GO-CS are studied. As a novel nanocarrier, GO-CS is applied to load a water-insoluble anticancer drug, camptothecin (CPT), via π-π stacking and hydrophobic interactions. It is demonstrated that GO-CS possesses a superior loading capacity for CPT, and the GO-CS-CPT complexes show remarkably high cytotoxicity in HepG2 and HeLa cell lines compared to the pure drug. At the same time, GO-CS is also able to condense plasmid DNA into stable, nanosized complexes, and the resulting GO-CS/pDNA nanoparticles exhibit reasonable transfection efficiency in HeLa cells at certain nitrogen/phosphate ratios. Therefore, the GO-CS nanocarrier is able to load and deliver both anticancer drugs and genes.

Photoinduced morphology switching of polymer nanoaggregates in aqueous solution

A novel photosensitive C-PNIPAAm comprising hydrophilic PNIPAAm conjugated with a relatively short but very hydrophobic coumarin part was designed and prepared using a coumarin-containing disulfide derivative (C-S-S-C) as transfer agent in the presence of Bu(3)P and water. It was found that C-PNIPAAm can form polymer micelles in aqueous solution. And the micellar morphology in aqueous solution can be photoswitched into hollow spheres according to the photodimerization of coumarin end groups upon 365 nm irradiation and reform the micellar morphology after the subsequent photoscission of dimers upon 254 nm. This instant morphology changing phenomenon was successfully monitored by dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. TEM observations showed the small spherical shape of micelles with diameter at 30-50 nm before photo-cross-linking, the big vesicles with diameter at 200-350 nm after photo-cross-linking, and the small micelles with diameter at 30-50 nm after the subsequent photo-de-cross-linking in the first irradiation cycle. The reason for this significant morphology switching can be attributed to the reversible photoinduced amphiphilic structure transformation between the telechelic "hydrophobic end-hydrophilic chain" structure and the ABA type of "hydrophilic chain-hydrophobic center-hydrophilic chain" one upon alternating irradiation.