One-Pot Preparation of Hydrophilic Polylactide Porous Scaffolds by Using Safe Solvent and Choline Taurinate Ionic Liquid

Polylactides (PLAs) are a class of polymers that are very appealing in biomedical applications due to their degradability in nontoxic products, tunable structural, and mechanical properties. However, they have some drawbacks related to their high hydrophobicity, lack of functional groups able to graft bioactive molecules, and solubility in unsafe solvents. To circumvent these shortcomings, porous scaffolds for tissue engineering were prepared by vigorously mixing a solution of isotactic and atactic PLA in nontoxic ethyl acetate at 70 °C with a water solution of choline taurinate. The partial aminolysis of the polymer ester bonds by taurine -NH2 brought about the formation of PLA oligomers with surfactant activity that stabilized the water-in-oil emulsion. Upon drying, a negligible shrinking occurred, and mechanically stable porous scaffolds were obtained. By varying the polymer composition and choline taurinate concentration, it was possible to modulate the pore dimensions (30-50 µm) and mechanical properties (Young's moduli: 1-6 MPa) of the samples. Furthermore, the grafted choline taurinate made the surface of the PLA films hydrophilic, as observed by contact angle measurements (advancing contact angle: 76°; receding contact angle: 40°-13°). The preparation method was very simple because it was based on a one-pot mild reaction that did not require an additional purification step, as all the employed chemicals were nontoxic.

Sustainable production and biomedical application of polymalic acid from renewable biomass and food processing wastes

Polymalic acid (PMA), a homopolymer of L-malic acid (MA) generated from a yeast-like fungus Aureobasidium pullulans, has unique properties and many applications in food, biomedical, and environmental fields. Acid hydrolysis of PMA, releasing the monomer MA, has become a novel process for the production of bio-based MA, which currently is produced by chemical synthesis using petroleum-derived feedstocks. Recently, current researches attempted to develop economically competitive process for PMA and MA production from renewable biomass feedstocks. Compared to lignocellulosic biomass, PMA and MA production from low-value food processing wastes or by-products, generated from corn, sugarcane, or soybean refinery industries, showed more economical and sustainable for developing a MA derivatives platform from biomass biorefinery to chemical conversion. In the review, we compared the process feasibility for PMA fermentation with lignocellulosic biomass and food process wastes. Some useful strategies for metabolic engineering are summarized. Its changeable applicability and future prospects in food and biomedical fields are also discussed.

Symmetrical substituted glycolides: methodology and polymerization

Poly(substituted glycolide)s have emerged during the past decades to create extraordinary breakthroughs in a wide range of therapeutic applications due to superior properties as an alternative to PLA and PLGA systems.

Environment-stimulated nanocarriers enabling multi-active sites for high drug encapsulation as an “on demand” drug release system

Limited active sites in polyesters hinder fabrication of multifunctional biodegradable nanocarriers for successful clinical applications.

Thiol-substituted copolylactide: synthesis, characterization and post-polymerization modification using thiol–ene chemistry

A copolylactide that is substituted with pendent thiol groups (thiol-PL) undergoes coupling with a variety of electrophiles under mild conditions via thiol–ene addition.

Natural and synthetic poly(malic acid)-based derivates: a family of versatile biopolymers for the design of drug nanocarriers

The field of specific drug delivery is an expanding research domain. Besides the use of liposomes formed from various lipids, natural and synthetic polymers have been developed to prepare more efficient drug delivery systems either under macromolecular prodrugs or under particulate nanovectors. To ameliorate the biocompatibility of such nanocarriers, degradable natural or synthetic polymers have attracted the interest of many researchers. In this context, poly(malic acid) (PMLA) extracted from microorganisms or synthesized from malic or aspartic acid was used to prepare water-soluble drug carriers or nanoparticles. Within this review, both the preparation and the applications of PMLA derivatives are described emphasizing the in vitro and in vivo assays. The results obtained by several groups highlight the interest of such polyesters in the field of drug delivery.

Radiopaque poly(ε-caprolactone) as additive for X-ray imaging of temporary implantable medical devices

A family of radiopaque PCL, poly(ε-caprolactone-co-α-triiodobenzoate-ε-caprolactone), has been designed, used and evaluated as macromolecular contrast agent for X-ray imaging of implantable polymeric biomaterials.

A facile and versatile strategy to efficiently synthesize sulfonated poly(butylene succinate), self-assembly behavior and biocompatibility

The negatively charged micelles self-assembled from sulfonated poly(butylene succinate) have good stability and excellent biocompatibility.

From nanospheres to micelles: simple control of PCL-g-PEG copolymers’ amphiphilicity through thiol–yne photografting

A unique combination of polyester post-polymerization modification and photoradical thiol–yne addition is reported for the synthesis of amphiphilic degradable graft copolymers with controlled compositions, used to prepare micelles or nanospheres.

Biocompatible, biodegradable and porous liquid crystal elastomer scaffolds for spatial cell cultures

Here we report on the modular synthesis and characterization of biodegradable, controlled porous, liquid crystal elastomers (LCE) and their use as three-dimensional cell culture scaffolds. The elastomers were prepared by cross-linking of star block-co-polymers with pendant cholesterol units resulting in the formation of smectic-A LCEs as determined by polarized optical microscopy, DSC, and X-ray diffraction. Scanning electron microscopy revealed the porosity of the as-prepared biocompatible LCEs, making them suitable as 3D cell culture scaffolds. Biodegradability studies in physiological buffers at varying pH show that these scaffolds are intact for about 11 weeks after which degradation sets in at an exponential rate. Initial results from cell culture studies indicate that these smectic LCEs are compatible with growth, survival, and expansion of cultured neuroblastomas and myoblasts when grown on the LCEs for extended time periods (about a month). These preliminary cell studies focused on characterizing the elastomer-based scaffolds' biocompatibility and the successful 3D incorporation as well as growth of cells in 60 to 150-μm thick elastomer sheets.

Benzyl β-malolactonate polymers: a long story with recent advances

Benzyl β-malolactonate (MLABe) and its corresponding poly(benzyl β-malolactonate) (PMLABe) homopolymers and copolymers of the poly(hydroxyalkanoate) (PHA) family.

Strategies Toward Well-Defined Polymer Nanoparticles Inspired by Nature: Chemistry versus Versatility

Polymeric nanoparticles are promising delivery platforms for various biomedical applications. One of the main challenges toward the development of therapeutic nanoparticles is the premature disassembly and release of the encapsulated drug. Among the different strategies to enhance the kinetic stability of polymeric nanoparticles, shell- and core-crosslinking have been shown to provide robust character, while creating a suitable environment for encapsulation of a wide range of therapeutics, including hydrophilic, hydrophobic, metallic, and small and large biomolecules, with gating of their release as well. The versatility of shell- and core-crosslinked nanoparticles is driven from the ease by which the structures of the shell- and core-forming polymers and crosslinkers can be modified. In addition, postmodification with cell-recognition moieties, grafting of antibiofouling polymers, or chemical degradation of the core to yield nanocages allow the use of these robust nanostructures as "smart" nanocarriers. The building principles of these multifunctional nanoparticles borrow analogy from the synthesis, supramolecular assembly, stabilization, and dynamic activity of the naturally driven biological nanoparticles such as proteins, lipoproteins, and viruses. In this review, the chemistry involved during the buildup from small molecules to polymers to covalently stabilized nanoscopic objects is detailed, with contrast of the strategies of the supramolecular assembly of polymer building blocks followed by intramicellar stabilization into shell-, core-, or core-shell-crosslinked knedel-like nanoparticles versus polymerization of polymers into nanoscopic molecular brushes followed by further intramolecular covalent stabilization events. The rational design of shell-crosslinked knedel-like nanoparticles is then elaborated for therapeutic packaging and delivery, with emphasis on the polymer chemistry aspects to accomplish the synthesis of such nanoparticulate systems.

Nanoaggregates of biodegradable amphiphilic random polycations for delivering water-insoluble drugs

Cationic amphiphilic random copolyesters were obtained by copolymerization of 5-Z-amino-δ-valerolactone and ε-caprolactone. The amino content of the final copolymers was controlled by the polymerization feed ratio and was in the range 10 to 100%. Copolymers solubility and aggregation behavior was assessed by conductometric and zeta potential analyses. A critical aggregation concentration of ca. 0.05% (w/v) was found for all water-soluble copolymers that formed nanoaggregates. Two populations were found to be present in equilibrium with hydrodynamic diameters in the range of 30-50 and 100-250 nm. The capacity to use the amphiphilic and cationic character of the nanoaggregates to encapsulate highly hydrophobic compounds was further investigated. Finally, copolymers hemo- and cytocompatibility were evaluated by hemagglutination, hemolysis, and cells proliferation tests. The results showed that the proposed cationic amphiphilic random copolyesters are biocompatible.

Novel cyclosporin A formulations using MPEG-hexyl-substituted polylactide micelles: a suitability study

The immunosuppressive agent Cyclosporin A (CsA) has very poor solubility in water and, in consequence, non-aqueous formulations have been developed for its intravenous administration to treat patients with transplant rejection. In this article, aqueous micelle solutions of novel amphiphilic copolymers based on methoxy-poly(ethylene glycol) (MPEG) and hexyl-substituted poly(lactides) (hexPLA) were studied for possible incorporation and formulation of CsA, and for their biocompatibility towards novel pharmaceutical applications. Above the critical micellar concentration (CMC), MPEG-hexPLA block-copolymers self-assemble into unimodal micelles with diameters of around 30 nm, either unloaded or drug-loaded. The best shelf-life stability of these formulations was observed when stored at 4°C with a drug loss inferior to 7% after 1 year. The polymer and micelle toxicities were evaluated in vitro for three different cell lines and in vivo using the chick embryo chorioallantoic membrane (CAM) model. The hemolytic property was assessed using human blood samples. As the studies revealed, MPEG-hexPLAs are non-toxic and do not show hemolysis; the same was found for the comparable MPEG-PLAs, both as unimers below their CMC and as polymeric micelles up to copolymer concentrations of 20 mg/mL. At this concentration, CsA was efficiently incorporated into MPEG-hexPLA micelles up to 6 mg/mL, which corresponds to a 500-fold increase of its water solubility. The current recommended clinical concentration administered per infusion (0.5-2.5 mg/mL) can be easily achieved and requires four times less copolymer than with the often-used Cremophor®EL surfactant. In this regard, MPEG-hexPLA micelle formulations can be an applicable formulation in transplant rejection treatments as an injectable CsA carrier system.