Tuning the sugar-response of boronic acid block copolymers

The Rise of Boron-Containing Compounds: Advancements in Synthesis, Medicinal Chemistry, and Emerging Pharmacology

Boron-containing compounds (BCC) have emerged as important pharmacophores. To date, five BCC drugs (including boronic acids and boroles) have been approved by the FDA for the treatment of cancer, infections, and atopic dermatitis, while some natural BCC are included in dietary supplements. Boron's Lewis acidity facilitates a mechanism of action via formation of reversible covalent bonds within the active site of target proteins. Boron has also been employed in the development of fluorophores, such as BODIPY for imaging, and in carboranes that are potential neutron capture therapy agents as well as novel agents in diagnostics and therapy. The utility of natural and synthetic BCC has become multifaceted, and the breadth of their applications continues to expand. This review covers the many uses and targets of boron in medicinal chemistry.

Advances in the Design of Phenylboronic Acid-Based Glucose-Sensitive Hydrogels

Diabetes, characterized by an uncontrolled blood glucose level, is the main cause of blindness, heart attack, stroke, and lower limb amputation. Glucose-sensitive hydrogels able to release hypoglycemic drugs (such as insulin) as a response to the increase of the glucose level are of interest for researchers, considering the large number of diabetes patients in the world (537 million in 2021, reported by the International Diabetes Federation). Considering the current growth, it is estimated that, up to 2045, the number of people with diabetes will increase to 783 million. The present work reviews the recent developments on the hydrogels based on phenylboronic acid and its derivatives, with sensitivity to glucose, which can be suitable candidates for the design of insulin delivery systems. After a brief presentation of the dynamic covalent bonds, the design of glucose-responsive hydrogels, the mechanism by which the hypoglycemic drug release is achieved, and their self-healing capacity are presented and discussed. Finally, the conclusions and the main aspects that should be addressed in future research are shown.

RAFT dispersion polymerization induced self-assembly (PISA) of boronic acid-substituted acrylamides

For the unprotected monomer, the boroxine core of nanoparticles allows transitions to higher order morphologies, while worms and vesicles are yielded directly from PISA of the pinacol ester-protected monomer.

Glucose-Sensitive Core-Cross-Linked Nanoparticles Constructed with Polyphosphoester Diblock Copolymer for Controlling Insulin Delivery

This work aims to construct biocompatible, biodegradable core-cross-linked and insulin-loaded nanoparticles which are sensitive to glucose and release insulin via cleavage of the nanoparticles in a high-concentration blood glucose environment. First, a polyphosphoester-based diblock copolymer (PBYP-g-Gluc)-b-PEEP was prepared via ring-opening copolymerization (ROP) and the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) in which PBYP and PEEP represent the polymer segments from 2-(but-3-yn-1-yloxy)-2-oxo-1,3,2-dioxaphospholane and 2-ethoxy-2-oxo-1,3,2-dioxaphospholane, respectively, and Gluc comes from 2-azidoethyl-β-d-glucopyranoside (Gluc-N3) that grafted with PBYP. The structure and molecular weight of the copolymer were characterized by 1H NMR, 31P NMR, GPC, FT-IR, and UV-vis measurements. The amphiphilic copolymer could self-assemble into core-shell uncore-cross-linked nanoparticles (UCCL NPs) in aqueous solutions and form core-cross-linked nanoparticles (CCL NPs) after adding cross-linking agent adipoylamidophenylboronic acid (AAPBA). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to study the self-assembly behavior of the two kinds of NPs and the effect of different Gluc group contents on the size of NPs further to verify the stability and glucose sensitivity of CCL NPs. The ability of NPs to load fluorescein isothiocyanate-labeled insulin (FITC-insulin) and their glucose-triggered release behavior were detected by a fluorescence spectrophotometer. The results of methyl thiazolyl tetrazolium (MTT) assay and hemolysis activity experiments showed that the CCL NPs had good biocompatibility. An in vivo hypoglycemic study has shown that FITC-insulin-loaded CCL NPs could reduce blood glucose and have a protective effect on hypoglycemia. This research provides a new method for constructing biodegradable and glucose-sensitive core-cross-linked nanomedicine carriers for controlled insulin release.

Galactose-based polymer-containing phenylboronic acid as carriers for insulin delivery

The galactose-based polymer is a promising drug delivery material. Herein, a new galactose-based block copolymer, termed as 6-O-vinyl sebacic acid-D-galactopyranosyl ester block 3-acrylamide phenylboric acid p(OVNG-b-AAPBA) was successfully synthesized by 'block copolymer' method. The structure of p(OVNG-b-AAPBA) was proved by nuclear magnetic hydrogen spectrum (1 HNMR) and infrared (IR), the thermal stability was observed by thermogravimetric analyzer, and the molecular weights (Mw and Mn) were demonstrated by Gel permeation chromatography (GPC). The above test results suggested that the polymer of p(OVNG-b-AAPBA) was successfully synthesized, and it had optimal molecular weight and thermal stability, which could be used for investigating the drug delivery system. Then, this block copolymer was prepared to the nanoparticle (NP), these NPs had a satisfactory morphology, and their safety was verified by MTT and chronic animal toxicology test. In addition, insulin was encapsulated by the p(OVNG-b-AAPBA) NPs, the drug loading rate and encapsulation efficiency increased with that of AAPBA in the polymer. Finally, this study confirmed that these NPs can effectively maintain the blood sugar of diabetic mice at 96 h. In conclusion, the current study suggested that the insulin-loaded galactose-based polymer-block-3-acrylamide phenylboric acid NPs had slow-release/glucose-responsive drug release performance, which might play an active role in the diabetes therapy.

Tailoring Azlactone-Based Block Copolymers for Stimuli-Responsive Disassembly of Nanocarriers

Stimuli-responsive nanoparticles based on a reactive block copolymers (BCPs) of poly(ethylene glycol)-b-poly(2-vinyl-4,4-dimethylazlactone) (PEG-b-PVDMA) have been fabricated for loading and controlled release of molecular cargoes. Microphase segregation of PEG-b-PVDMA BCPs enables the construction of well-defined nanoparticles in aqueous solutions. The azlactone groups in VDMA repeat units offer active sites for hydrophilization of the BCPs and functionalization by primary amines. The hydrophilization of PEG-b-PVDMA BCPs induces gradual reconstruction and dissociation of the BCP nanoparticles. Functional primary amines can be conjugated to PEG-b-PVDMA BCPs, yielding azobenzene- and pyridine-containing BCPs. The self-assembled nanoparticles made from the functionalized BCPs can disassemble in response to different external stimuli (e.g., addition of β-cyclodextrin and pH changes). The gradual reconstruction of functionalized PEG-b-PVDMA BCP nanoparticles caused by hydrolysis of residual azlactone groups provides a novel method to engineer sub-50 nm, well-dispersed, stimuli-responsive nanoparticles. These nanoparticles can incorporate molecular cargoes and release them upon external stimuli, making the azlactone-containing BCPs attractive platforms for the development of controlled delivery vehicles.

Curcumin–polymer conjugates with dynamic boronic acid ester linkages for selective killing of cancer cells

A phenylboronic acid (PBA)-containing copolymer was synthesized via the Hantzsch reaction and radical polymerization. Curcumin was dynamically included in this PBA-containing polymer to selectively kill cancer cells.

Sphere-to-worm morphological transitions and size changes through thiol–para-fluoro core modification of PISA-made nano-objects

Spherical diblock copolymer nanoparticles became larger spheres, unimers, or worm-shaped particles when functionalised via thiol–para-fluoro substitution in the core.

Structure-Reactivity Relationships in Boronic Acid-Diol Complexation

Boronic acids have found widespread use in the field of biomaterials, primarily through their ability to bind with biologically relevant 1,2- and 1,3-diols, including saccharides and peptidoglycans, or with polyols to prepare hydrogels with dynamic covalent or responsive behavior. Despite a wide range of boronic acid architectures that have been previously considered, there is a need for greater understanding of the structure-reactivity relationships that govern binding affinity to diols. In this study, various boronic acids and other organoboron compounds were investigated to determine their pK a and their binding constants with the biologically relevant diols including sorbitol, fructose, and glucose. Boronic acid pK a values were determined through spectroscopic titration, whereas binding constants were determined by fluorescence spectroscopy during competitive binding studies. Key structure-reactivity relationships clearly indicated that both boronic acid structure and solution pH must be carefully considered. By considering a variety of boronic acids with systematically varied electronics and sterics, these results provide guidance during selection of organoboron compounds in sensing, delivery, and materials chemistry.

Responsive Emulsions Stabilized by Amphiphilic Supramolecular Graft Copolymers Formed in Situ at the Oil-Water Interface

Amphiphilic supramolecular graft copolymers which can stabilize oil-in-water (o/w) emulsions and enable responsive demulsification were demonstrated in this study. Linear poly[( N, N-dimethylacrylmide)- stat-(3-acrylamidophenylboronic acid)] (PDMA- stat-PAPBA) copolymers with phenylboronic acid (PBA) groups and linear polystyrene homopolymers with cis-diol terminals (PS(OH)₂) were synthesized by reversible addition-fragmentation chain transfer polymerization. By the homogenization of the biphasic mixtures of an alkaline water solution of PDMA- stat-PAPBA copolymer and a toluene solution of PS(OH)₂ homopolymer, stable o/w emulsions could be generated, although neither PDMA- stat-PAPBA nor PS(OH)₂ alone was able to stabilize the emulsion. It was verified that the dispersed oil droplets in the emulsions were stabilized by the amphiphilic PDMA- stat-PAPBA- g-PS supramolecular graft copolymers, which were formed in situ at the oil-water interface by the complexation between the lateral PBA groups of PDMA- stat-PAPBA and the diol terminals of PS(OH)₂ during homogenization. These emulsions showed pH- and glucose-responsive demulsification because of the reversible B-O bonds between the PDMA- stat-PAPBA backbones and the PS side chains. The effects of polymer concentrations on emulsion formation were also investigated. The current study provides an alternative method for the facile preparation of responsive polymeric emulsifiers, which potentially may be extended to other polymer pairs containing PBA and cis-diol groups.

Glucose-sensitive polymer nanoparticles for self-regulated drug delivery

Glucose-sensitive drug delivery systems, which can continuously and automatically regulate drug release based on the concentration of glucose, have attracted much interest in recent years. Self-regulated drug delivery platforms have potential application in diabetes treatment to reduce the intervention and improve the quality of life for patients. At present, there are three types of glucose-sensitive drug delivery systems based on glucose oxidase (GOD), concanavalin A (Con A), and phenylboronic acid (PBA) respectively. This review covers the recent advances in GOD-, Con A-, or PBA-mediated glucose-sensitive nanoscale drug delivery systems, and provides their major challenges and opportunities.

Maximizing the symbiosis of static and dynamic bonds in self-healing boronic ester networks

Networks that contain boronic ester crosslinks undergo dynamic bond exchange that enables self-healing behavior and reprocessing.

A synthetic approach toward a pH and sugar-responsive diblock copolymer via post-polymerization modification

A novel pH- and sugar-responsive diblock copolymer containing phenylboronic acid was synthesized by RAFT and a post-polymerization modification strategy.

Fluorescent Cell-Conjugation by a Multifunctional Polymer: A New Application of the Hantzsch Reaction

Multicomponent reactions (MCRs) can form unique structures with interesting functions, therefore, multifunctional polymers might be simply prepared using MCRs as coupling tools to simultaneously link and generate different functional groups. To verify this concept, a new fluorescent polymer containing phenylboronic acid has been facilely prepared via a one pot method by combining the Hantzsch reaction with reversible addition-fragmentation chain transfer (RAFT) polymerization. The Hantzsch-RAFT system has been found robust to smoothly achieve predesigned multifunctional polymer, which can be used for cell conjugation through the interaction between phenylboronic acid and glycoprotein on cell membrane. The conjugated cells could be directly observed due to the fluorescent Hantzsch moiety in the polymer chain, demonstrating a new application of the old Hantzsch reaction (>130 years) outside organic chemistry. Meanwhile, the conjugated cells remained excellent dispersity in the presence of coagulation protein (lectin), implying that multifunctional polymer a possible anticoagulant for cell separation. We believe that the current research paves a new way to exploit new applications of MCRs in interdisciplinary fields and might prompt the development of other multifunctional polymers based on different MCRs.

Phenylboronic acid-functionalized core–shell magnetic composite nanoparticles as a novel protocol for selective enrichment of fructose from a fructose–glucose aqueous solution

We developed an efficient and mild method for the preparation of boronic acid-functionalized magnetic nanoparticles (MNPs), and the selective separation of fructose from a sample solution was demonstrated for the first time.

Responsive Boronic Acid-Decorated (Co)polymers: From Glucose Sensors to Autonomous Drug Delivery

Boronic acid-containing (co)polymers have fascinated researchers for decades, garnering attention for their unique responsiveness toward 1,2- and 1,3-diols, including saccharides and nucleotides. The applications of materials that exert this property are manifold including sensing, but also self-regulated drug delivery systems through responsive membranes or micelles. In this review, some of the main applications of boronic acid containing (co)polymers are discussed focusing on the role of the boronic acid group in the response mechanism. We hope that this summary, which highlights the importance and potential of boronic acid-decorated polymeric materials, will inspire further research within this interesting field of responsive polymers and polymeric materials.

Synthesis of a phenylboronic acid-functionalized thermosensitive block copolymer and its application in separation and purification of vicinal-diol-containing compounds

Phenylboronic acid-functionalized PEO₂₀PPO₆₀PEO₂₀ was synthesized and used to separate ortho-hydroxyl compounds as the collector in an aqueous two-phase flotation system.

Synthesis of novel boronic acid-decorated poly(2-oxazoline)s showing triple-stimuli responsive behavior

The synthesis of novel boronic-acid decorated poly(2-oxazoline)s showing a glucose- and pH dependent thermal transition is reported.

Synthesis and polymerization of boronic acid containing monomers

This mini-review summarizes the most commonly used methods for the synthesis of phenylboronic acid-(co)polymers ranging from simple straightforward polymerization to complex post-polymerization modification.

Block versus Random Amphiphilic Glycopolymer Nanopaticles as Glucose-Responsive Vehicles

To explore the effect of polymer structure on their self-assembled aggregates and their unique characteristics, this study was devoted to developing a series of amphiphilic block and random phenylboronic acid-based glycopolymers by RAFT polymerization. The amphiphilic glycopolymers were successfully self-assembled into spherically shaped nanoparticles with narrow size distribution in aqueous solution. For block and random copolymers with similar monomer compositions, block copolymer nanoparticles exhibited a more regular transmittance change with the increasing glucose level, while a more evident variation of size and quicker decreasing tendency in I/I0 behavior in different glucose media were observed for random copolymer nanoparticles. Cell viability of all the polymer nanoparticles investigated by MTT assay was higher than 80%, indicating that both block and random copolymers had good cytocompatibility. Insulin could be encapsulated into both nanoparticles, and insulin release rate for random glycopolymer was slightly quicker than that for the block ones. We speculate that different chain conformations between block and random glycopolymers play an important role in self-assembled nanoaggregates and underlying glucose-sensitive behavior.

Multilayered Thin Films from Boronic Acid-Functional Poly(amido amine)s

PURPOSE

To investigate the properties of phenylboronic acid-functional poly(amido amine) polymers (BA-PAA) in forming multilayered thin films with poly(vinyl alcohol) (PVA) and chondroitin sulfate (ChS), and to evaluate their compatibility with COS-7 cells.

METHODS

Copolymers of phenylboronic acid-functional poly(amido amine)s, differing in the content of primary amine (DAB-BA-PAA) or alcohol (ABOL-BA-PAA) side groups, were synthesized and applied in the formation of multilayers with PVA and ChS. Biocompatibility of the resulting films was evaluated through cell culture experiments with COS-7 cells grown on the films.

RESULTS

PVA-based multilayers were thin, reaching ~100 nm at 10 bilayers, whereas ChS-based multilayers were thick, reaching ~600 nm at the same number of bilayers. All of the multilayers are stable under physiological conditions in vitro and are responsive to reducing agents, owing to the presence of disulfide bonds in the polymers. PVA-based films were demonstrated to be responsive to glucose at physiological pH at the investigated glucose concentrations (10-100 mM). The multilayered films displayed biocompatibility in cell culture experiments, promoting attachment and proliferation of COS-7 cells.

CONCLUSIONS

Responsive thin films based on boronic acid functional poly(amido amine)s are promising biocompatible materials for biomedical applications, such as drug releasing surfaces on stents or implants. Graphical Abstract Layer-by-Layer Assembly.

Gossypol-cross-linked boronic acid-modified hydrogels: a functional matrix for the controlled release of an anticancer drug

Anticancer drug gossypol cross-links phenylboronic acid-modified acrylamide copolymer chains to form a hydrogel matrix. The hydrogel is dissociated in an acidic environment (pH 4.5), and its dissociation is enhanced in the presence of lactic acid (an α-hydroxy carboxylic acid) as compared to formic acid. The enhanced dissociation of the hydrogel by lactic acid is attributed to the effective separation of the boronate ester bridging groups through the formation of a stabilized complex between the boronic acid substituent and the lactic acid. Because lactic acid exists in cancer cells in elevated amounts and the cancer cells' environment is acidic, the cross-linked hydrogel represents a stimuli-responsive matrix for the controlled release of gossypol. The functionality is demonstrated and characterized by rheology and other spectroscopic means.

Boronic Acid-Based Hydrogels Undergo Self-Healing at Neutral and Acidic pH

This report describes the synthesis and characterization of boronate ester-cross-linked hydrogels capable of self-healing behavior at neutral and acidic pH. This atypically wide pH range over which healing behavior is observed was achieved through the use of an intramolecular coordinating boronic acid monomer, 2-acrylamidophenylboronic acid (2APBA), where the internal coordination helped to stabilize cross-links formed at acidic and neutral pH. Two different hydrogels were formed from a 2APBA copolymer cross-linked with either poly(vinyl alcohol) or a catechol-functionalized copolymer. The self-healing ability of these hydrogels was characterized through physical testing and rheological studies. Furthermore, the catechol cross-linked hydrogel was shown to be oxygen sensitive, demonstrating reduced self-healing and stress relaxation after partial oxidation. The synthesis of these hydrogels demonstrates a new strategy to produce boronic acid materials capable of self-healing at physiological pH.

Self-powered glucose-responsive micropumps

A self-powered polymeric micropump based on boronate chemistry is described. The pump is triggered by the presence of glucose in ambient conditions and induces convective fluid flows, with pumping velocity proportional to the glucose concentration. The pumping is due to buoyancy convection that originates from reaction-associated heat flux, as verified from experiments and finite difference modeling. As predicted, the fluid flow increases with increasing height of the chamber. In addition, pumping velocity is enhanced on replacing glucose with mannitol because of the enhanced exothermicity associated with the reaction of the latter.

Phenylboronate-diol crosslinked glycopolymeric nanocarriers for insulin delivery at physiological pH

Research into polymers with glucose-sensitivity in physiological conditions has expanded recently due to their therapeutic potential in diabetes. Herein, to explore the glucose-responsive properties of a new polymer under physiological conditions, we synthesized an amphiphilic block glycopolymer based on phenylboronic acid and a carbohydrate, which was named poly(d-gluconamidoethyl methacrylate-block-3-acrylamidophenylboronic acid) (p(AAPBA-b-GAMA)). Based on the cross-linking between the diol groups of the carbohydrates and phenylboronic acid, the glycopolymers self-assembled to form nanoparticles (NPs). The glucose-sensitivity was revealed by the swelling behavior of the NPs at different glucose concentrations and was found to be dependent on the glucose level. The morphology of the NPs revealed by transmission electron microscopy showed that the NPs were spherical in shape with good dispersity. The cell viability of the NPs investigated by MTT assay was more than 90%, indicating that the glycopolymers had good cytocompatibility. Insulin could be loaded onto the glycopolymer NPs with high efficiency (up to 10%), and insulin release increased with enhancement of the glucose level in the medium. Such a glucose-responsive glycopolymer is an excellent candidate that holds great potential in the treatment of diabetes.

A photonic glucose biosensor for chronic wound prognostics

An optical biosensor based on the switching of poly(4-vinylphenylboronic acid) (PVPBA) grafted to the pores of porous silicon (pSi) films in response to pH and glucose.

Carbon nanotubes as optical biomedical sensors

Biosensors are important tools in biomedical research. Moreover, they are becoming an essential part of modern healthcare. In the future, biosensor development will become even more crucial due to the demand for personalized-medicine, point-of care devices and cheaper diagnostic tools. Substantial advances in sensor technology are often fueled by the advent of new materials. Therefore, nanomaterials have motivated a large body of research and such materials have been implemented into biosensor devices. Among these new materials carbon nanotubes (CNTs) are especially promising building blocks for biosensors due to their unique electronic and optical properties. Carbon nanotubes are rolled-up cylinders of carbon monolayers (graphene). They can be chemically modified in such a way that biologically relevant molecules can be detected with high sensitivity and selectivity. In this review article we will discuss how carbon nanotubes can be used to create biosensors. We review the latest advancements of optical carbon nanotube based biosensors with a special focus on near-infrared (NIR)-fluorescence, Raman-scattering and fluorescence quenching.

Reaction-based and single fluorescent emitter decorated ratiometric nanoprobe to detect hydrogen peroxide

A novel reaction-based cross-linked polymeric nanoprobe with a self-calibrating ratiometric fluorescence readout to selectively detect H2O2 is reported. The polymeric nanoprobe is fabricated by using hydrophobic H2O2-reactive boronic ester groups, crosslinker units, and environmentally sensitive 3-hydroxyflavone fluorophores through a miniemulsion polymerization. On treatment with H2O2, the boronic esters in the polymer are cleaved to form hydrophilic alcohols and subsequently lead to a hydrophobic-hydrophilic transition. Covalently linked 3-hydroxyflavones manifest the change in polarity as a ratiometric transition from green to blue, accompanied by a 500-fold increase in volume. Furthermore, this nanoprobe has been used for ratiometric sensing of glucose by monitoring the H2O2 generated during the oxidation of glucose by glucose oxidase, and thus successfully distinguished between normal and pathological levels of glucose.

Folate conjugation to polymeric micelles via boronic acid ester to deliver platinum drugs to ovarian cancer cell lines

In this study, a novel technique was used for the reversible attachment of folic acid on the surface of polymeric micelles for a tumor-specific drug delivery system. The reversible conjugation is based on the interaction between phenylboronic acid (PBA) and dopamine to form a borate ester. The conjugation is fast and efficient and in vitro experiments via confocal fluorescent microscopy show that the linker is stable in for several hours. Reversible addition-fragmentation chain transfer (RAFT) polymerization was used to synthesize two various sized water-soluble block copolymer of oligoethylene glycol methylether methacylate and methyl acrylic acid (POEGMEMA(35)-b-PMAA(200) and POEGMEMA(26)-b-PMAA(90)). The platinum drug, oxoplatin, was then subsequently attached to the polymer via ester formation leading to platinum loading of 12 wt % as determined by TGA. The platinum-induced amphiphilic block copolymers that consequently led to the formation of micelles of sizes 150 and 20 nm in an aqueous environment with the longer PMAA block forming larger micelles. The small micelles were in addition cross-linked using 1,8-diaminooctane to further stabilize their structure. The targeting ability of folate conjugated polymeric micelles was investigated against two types of tumor cell lines: A549 (-FR) and OVCAR-3 (+FR). The cell line growth inhibitory efficacy of material synthesized was evaluated by using SRB method. The results revealed that folate conjugated micelles showed higher activity in FR + OVCAR-3 cells but not in FR - A549 cells. Similar results were obtained for both small and large micelles without the conjugation of folate. Comparing large and small micelles it can be observed that larger micelles are more efficient, which has been attributed to the lower stability of the smaller micelles. Micelle stabilization via cross-linking could indeed increase the toxicity of the drug carrier.

Glucose-Responsive Disassembly of Polymersomes of Sequence-Specific Boroxole-Containing Block Copolymers under Physiologically Relevant Conditions

Polymers containing organoboronic acids have recently gained interest as sugar-responsive materials owing to the reversible binding of saccharides to boronic acids, which triggers a change in the physical and chemical properties of these polymers, such as their water solubility. In particular, the ability of these polymers to bind glucose has attracted considerable attention because of the promise of these materials for the development of sensors and drug delivery systems for glucose-related human diseases, such as diabetes. We report here a new class of sugar-responsive polymers that are based on a sequence-specific copolymer of styreneboroxole and N-functionalized maleimide. The reversible addition-fragmentation and chain transfer (RAFT) polymerization of this pair of monomers ensured that a glucose receptor alternates with a nonresponsive solubilizing group throughout the sugar-responsive polymer chain. Due to the presence of hydrophilic solubilizing groups beween the solubility-switching boroxole moieties in the membrane-forming block, the polymersomes of the block copolymers responded to a lower level of glucose in the medium, resulting in diassembly of the bilayer membrane under a physiologically relevant pH and glucose level.