Porous graphene materials for water remediation

Facile fabrication and application of highly efficient reduced graphene oxide (rGO)-wrapped 3D foam for the removal of organic and inorganic water pollutants

The pace of water contamination is increasing daily due to expanding industrialisation. Finding a feasible solution for effectively remediating various organic and inorganic pollutants from large water bodies remains challenging. However, a nano-engineered advanced hybrid material could provide a practical solution for the efficient removal of such pollutants. This work has reported the development of a highly efficient and reusable absorbent comprising a porous polyurethane (PU) and reduced graphene oxide (rGO) nanosheets (rGOPU) for the removal of different organic oils (industrial oil, engine oil and mustard oil), dyes (MB, MO, RB, EY and MV) and heavy metals (Pb(II), Cr(VI), Cd(II), Co(II) and As(V)). The structure, morphology and properties of the rGOPU hybrid absorbents were analysed by using Raman spectroscopy, field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Brunner-Emitte-Teller (BET) analysis. The rGOPU possessed both superhydrophobicity and superoleophilicity with water and oil contact angles of about 164° and 0°, respectively. The prepared rGOPU has demonstrated an excellent oil-water separation ability (up to 99%), heavy metals removal efficiency (more than 75%), toxic dye adsorption (more than 55%), excellent recyclability (> 500 times for oils), extraordinary mechanical stability (90% compressible for > 1000 cycles) and high recoverability. This work presents the first demonstration of rGOPU's multifunctional absorbent capacity in large-scale wastewater treatment for effectively removing a wide variety of organic and inorganic contaminants.

Functional Nanohybrids and Nanocomposites Development for the Removal of Environmental Pollutants and Bioremediation

World population growth, with the consequent consumption of primary resources and production of waste, is progressively and seriously increasing the impact of anthropic activities on the environment and ecosystems. Environmental pollution deriving from anthropogenic activities is nowadays a serious problem that afflicts our planet and that cannot be neglected. In this regard, one of the most challenging tasks of the 21st century is to develop new eco-friendly, sustainable and economically-sound technologies to remediate the environment from pollutants. Nanotechnologies and new performing nanomaterials, thanks to their unique features, such as high surface area (surface/volume ratio), catalytic capacity, reactivity and easy functionalization to chemically modulate their properties, represent potential for the development of sustainable, advanced and innovative products/techniques for environmental (bio)remediation. This review discusses the most recent innovations of environmental recovery strategies of polluted areas based on different nanocomposites and nanohybrids with some examples of their use in combination with bioremediation techniques. In particular, attention is focused on eco-friendly and regenerable nano-solutions and their safe-by-design properties to support the latest research and innovation on sustainable strategies in the field of environmental (bio)remediation.

Graphene-derived antibacterial nanocomposites for water disinfection: Current and future perspectives

Antimicrobial nanomaterials provide numerous opportunities for the synthesis of next-generation sustainable water disinfectants. Using the keywords graphene and water disinfection and graphene antibacterial activity, a detailed search of the Scopus database yielded 198 and 1433 studies on using graphene for water disinfection applications and graphene antibacterial activity in the last ten years, respectively. Graphene family nanomaterials (GFNs) have emerged as effective antibacterial agents. The current innovations in graphene-, graphene oxide (GO)-, reduced graphene oxide (rGO)-, and graphene quantum dot (GQD)-based nanocomposites for water disinfection, including their functionalization with semiconductor photocatalysts and metal and metal oxide nanoparticles, have been thoroughly discussed in this review. Furthermore, their novel application in the fabrication of 3D porous hydrogels, thin films, and membranes has been emphasized. The physicochemical and structural properties affecting their antibacterial efficiency, such as sheet size, layer number, shape, edges, smoothness/roughness, arrangement mode, aggregation, dispersibility, and surface functionalization have been highlighted. The various mechanisms involved in GFN antibacterial action have been reviewed, including the mechanisms of membrane stress, ROS-dependent and -independent oxidative stress, cell wrapping/trapping, charge transfer, and interaction with cellular components. For safe applications, the potential biosafety and biocompatibility of GFNs in aquatic environments are emphasized. Finally, the current limitations and future perspectives are discussed. This review may provide ideas for developing efficient and practical solutions using graphene-, GO-, rGO-, and GQD-based nanocomposites in water disinfection by rationally employing their unique properties.

Zein adsorbents with micro/nanofibrous membrane structure for removal of oils, organic dyes, and heavy metal ions in aqueous solution

Developing multi-functional media for effectively removing different contaminants coexisted in wastewater system is highly desired. Herein, zein, a natural protein possessing abundant functional groups in molecule, is chosen to be fabricated into micro/nanofibrous membranes as adsorbents and separation media. Zein fibers with novel groove ribbon structures, which possess better structural characteristics, are designed for obtaining good adsorption performance. The adsorption performances of zein fiber membranes are evaluated. The results show that zein fiber membranes have the adsorption capacities up to 94 g/g for motor oil, 168 mg/g for Congo red, and 189 mg/g for Pb²⁺ ion for 1000 mg/L initial solution concentration, showing considerable competitiveness as compared with the reported adsorbents. The zein membrane with groove ribbon fiber morphology exhibits optimal adsorption capability and can be attractive multi-functional separation media.

Uptake and effects of graphene oxide nanomaterials alone and in combination with polycyclic aromatic hydrocarbons in zebrafish

Because of its surface characteristics, once in the aquatic environment, graphene could act as a carrier of pollutants, such as polycyclic aromatic hydrocarbons (PAHs), to aquatic organisms. In this study we aimed to (1) assess the capacity of graphene oxide (GO) to sorb PAHs and (2) to evaluate the toxicity of GO alone and in combination with PAHs on zebrafish embryos and adults. GO showed a high sorption capacity for benzo(a)pyrene (B(a)P) (98% of B(a)P sorbed from a nominal concentration of 100 μg/L) and for other PAHs of the water accommodated fraction (WAF) of a naphthenic North Sea crude oil, depending on their log K_ow (95.7% of phenanthrene, 84.4% of fluorene and 51.5% of acenaphthene). In embryos exposed to different GO nanomaterials alone and with PAHs, no significant mortality was recorded for any treatment. Nevertheless, malformation rate increased significantly in embryos exposed to the highest concentrations (5 or 10 mg/L) of GO and reduced GO (rGO) alone and with sorbed B(a)P (GO-B(a)P). On the other hand, adults were exposed for 21 days to 2 mg/L of GO, GO-B(a)P and GO co-exposed with WAF (GO + WAF) and to 100 μg/L B(a)P. Fish exposed to GO presented GO in the intestine lumen and liver vacuolisation. Transcription level of genes related to cell cycle regulation and oxidative stress was not altered, but the slight up-regulation of cyp1a measured in fish exposed to B(a)P for 3 days resulted in a significantly increased EROD activity. Fish exposed to GO-B(a)P and to B(a)P for 3 days and to GO + WAF for 21 days showed significantly higher catalase activity in the gills than control fish. Significantly lower acetylcholinesterase activity, indicating neurotoxic effects, was also observed in all fish treated for 21 days. Results demonstrated the capacity of GO to carry PAHs and to exert sublethal effects in zebrafish.

Carboxylated Graphene for Radical-Assisted Ultra-Trace-Level Water Treatment and Noble Metal Recovery

Sorption technologies, enabling removal of heavy metals, play a pivotal role in meeting the global demands for unrestricted access to drinking water. Standard sorption technologies suffer from limited efficiency related to the weak sorbent-metal interaction. Further challenges include the development of technologies enabling smart metal recovery and sorbent regeneration. To this end, a densely functionalized graphene, with 33% by mass content of carboxyl groups, linked through direct C-C bonds (graphene acid, GA) represents a previously unexplored solution to this challenge. GA revealed excellent efficiency for removal of highly toxic metals, such as Cd²⁺ and Pb²⁺. Due to its selective chemistry, GA can bind heavy metals with high affinity, even at concentrations of 1 mg L^-1 and in the presence of competing ions of natural drinking water, and reduce them down to drinking water allowance levels of a few μg L^-1. This is not only due to carboxyl groups but also due to the stable radical centers of the GA structure, enabling metal ion-radical interactions, as proved by EPR, XPS, and density functional theory calculations. GA offers full structural integrity during the highly acidic and basic treatment, which is exploited for noble metal recovery (Ga³⁺, In³⁺, Pd²⁺) and sorbent regeneration. Owing to these attributes, GA represents a fully reusable metal sorbent, applicable also in electrochemical energy technologies, as illustrated with a GA/Pt catalyst derived from Pt⁴⁺-contaminated water.

Graphene nanocomposites for transdermal biosensing

Transdermal biosensors for the real-time and continuous detection and monitoring of target molecules represent an intriguing pathway for enhancing health outcomes in a cost-effective and non-invasive fashion. Many transdermal biosensor devices contain microneedles and other miniaturized components. There remains an unmet clinical need for microneedle transdermal biosensors to obtain a more accurate, rapid, and reliable insight into the real-time monitoring of disease. The ability to monitor biomarkers at an intradermal molecular level in a non-invasive manner remains the next technological gap to solve real-world clinical problems. The emergence of the two-dimensional material graphene with unique material properties and the ability to quantify analytes and physiological status can enable the detection of critical biomarkers indicative of human disease. The development of a user-friendly, affordable, and non-invasive transdermal biosensing device for continuous and personalized monitoring of target molecules could be beneficial for many patients. This focus article considers the use of graphene-based transdermal biosensors for health monitoring, evaluation of these sensors for glucose and hydrogen peroxide detection via in vitro, in vivo, and ex vivo studies, recent technological innovations, and potential challenges. This article is categorized under: Diagnostic Tools > Biosensing.

Alkyl Chain Grafted-Reduced Graphene Oxide Membrane for Effective Separation of Water/Alcohol Miscible Mixtures

Separation of water/alcohol miscible mixtures via direct filtration only under gravity is a great challenge. Here, different alkyl chain grafted-reduced graphene oxide (alkyl-RGO) is synthesized and characterized. The hydrophobic alkyl chains can considerably modify the oil-wettability of the membranes and avoid water permeation. The alkyl-RGO membrane obtained by vacuum filtration can separate water/oil immiscible mixtures. Importantly, water/alcohol miscible mixtures could also be separated solely under gravity, where alcohols efficiently permeate the alkyl-RGO membrane while water is prevented through the membrane. The separation efficiency of C₁₂H-RGO membrane reaches up to about 0.04 vol% of water content for the case of separating an n-propanol/water (90:10 v/v) mixture with high n-propanol permeability of approx. 685 mL m⁻² h⁻¹. Molecular simulations indicate that the selective absorption ability and diffusion rate also affect water/alcohol separation. The alkyl-RGO membranes via gravity driven filtration can extend the applications of separation of water/alcohol miscible mixtures.

Metal-organic frameworks based adsorbents: A review from removal perspective of various environmental contaminants from wastewater

Rapidly increasing water contamination has turned into a major threat globally. The pollutants such as organic and inorganic compounds, heavy metals, and biological organisms are among the major contributor to water pollution. Therefore, the removal of these contaminants has attracted the researchers a lot. Various methodologies are being carried out for the purpose. Among them, the metal-organic frameworks (MOFs) with several active sites and tailorable porous architectures as adsorbents or photocatalytic removal agents is a fast-growing class of coordination chemistry to remove these agents from water. To date, numerous approaches dealing with water treatment including conservative and advanced technologies have been presented. This article thoroughly reviews the application of MOFs toward how to remove the toxic agents from water. The leading objective is to present up-to-date information and references regarding MOFs based materials toward wastewater treatment applications.

Green Graphene-Chitosan Sorbent Materials for Mercury Water Remediation

The development of new graphene-based nanocomposites able to provide synergistic effects for the adsorption of toxic heavy metals in realistic conditions (environment) is of higher demand for future applications. This work explores the preparation of a green nanocomposite based on the self-assembly of graphene oxide (GO) with chitosan (CH) for the remediation of Hg(II) in different water matrices, including ultrapure and natural waters (tap water, river water, and seawater). Starting at a concentration of 50 μg L^-1, the results showed that GO-CH nanocomposite has an excellent adsorption capacity of Hg (II) using very small doses (10 mg L^-1) in ultrapure water with a removal percentage (% R) of 97 % R after only two hours of contact time. In the case of tap water, the % R was 81.4% after four hours of contact time. In the case of river and seawater, the GO-CH nanocomposite showed a limited performance due the high complexity of the water matrices, leading to a residual removal of Hg(II). The obtained removal of Hg(II) at equilibrium in river and seawater for GO-CH was 13% R and 7% R, respectively. Our studies conducted with different mimicked sea waters revealed that the removal of mercury is not affected by the presence of NO₃^- and Na⁺ (>90% R of Hg(II)); however, in the presence of Cl^-, the mercury removal was virtually nonexistent (1% R of Hg(II)), most likely because of the formation of very stable chloro-complexes of Hg(II) with less affinity towards GO-CH.

Graphene oxide/polydimethylsiloxane composite sponge for removing Pb(ii) from water

An efficient adsorbent to remove Pb(ii) from water was prepared by treating polydimethylsiloxane (PDMS) sponge with polyvinyl alcohol and then coating the sponge with graphene oxide (GO). The GO-PDMS sponge was highly hydrophilic, easily handled during and after use, and easily recycled. The kinetics and isotherms of Pb(ii) sorption onto the GO-PDMS sponge were investigated by performing batch sorption tests. The kinetics of Pb(ii) sorption onto the GO-PDMS sponge indicated that sorption equilibrium occurred rapidly (within 60 min) and that the sorption data could be described using a pseudo-second-order model. Maximum Pb(ii) sorption onto the GO-PDMS sponge occurred at pH > 5. Increasing GO loading on the PDMS sponge increased the amount of Pb(ii) that could be sorbed. The isotherm for Pb(ii) sorption onto the GO-PDMS sponge was non-linear and was well described by the Langmuir isotherm model, indicating that Pb(ii) sorption onto the GO-PDMS sponge was homogeneous and occurred through sorption of a monolayer of Pb(ii). The GO-PDMS sponge, used as a filter, removed Pb(ii) efficiently from water. The Pb(ii) removal efficiencies were more than 50% and the maximum was 85%.

A first-principles study of nitrogene with monovacancy and light-atom substituted doping

Recent studies have shown that group V monolayer, called nitrogene, remain stable in a free-standing buckled honeycomb structure with a two-dimensional hexagonal lattice. It is predicted to be a nonmagnetic, wide band gap semiconductor. In this paper, three allotropes of nitrogen single layers are firstly investigated and it is determined that the buckled honeycomb structure of nitrogene (denoted as b-N) is the lowest energetically. Then taking b-N as an example, the geometrical structures and the electronic properties of it with monovacancy and substituted doping with heterogeneous atoms, such as B, C, O, Al, Si, and P, are studied. It is found that the single vacancy in b-N is in P_3m symmetry and it is polarized stable with a local magnetic moment of 3.0 μ _B for each monovacancy. The substituted heterogeneous atom has little impact on the geometrical structures, while for Al, Si, and P, they move upward of the nitrogene plane due to the larger atomic radius compared to N. It is also found that C-, Si-, and O-doped nitrogene are spin-polarized stable, bringing a magnetic moment of about 1.0 μ _B for each doped atom. Doping of multiple carbon atoms in one hexagonal ring of nitrogene, which prefers forming the polymer and the nitrogene with the doping of an odd number of carbon atoms, is magnetic stable, arising about 1.0 μ _B magnetic moment in each supercell.

Graphene oxide-polysulfone filters for tap water purification, obtained by fast microwave oven treatment

The availability of clean, pure water is a major challenge for the future of our society. 2-Dimensional nanosheets of GO seem promising as nanoporous adsorbent or filters for water purification; however, their processing in macroscopic filters is challenging, and their cost vs. standard polymer filters is too high. Here, we describe a novel approach to combine graphene oxide (GO) sheets with commercial polysulfone (PSU) membranes for improved removal of organic contaminants from water. The adsorption physics of contaminants on the PSU-GO composite follows Langmuir and Brunauer-Emmett-Teller (BET) models, with partial swelling and intercalation of molecules in between the GO layers. Such a mechanism, well-known in layered clays, has not been reported previously for graphene or GO. Our approach requires minimal amounts of GO, deposited directly on the surface of the polymer, followed by stabilization using microwaves or heat. The purification efficiency of the PSU-GO composites is significantly improved vs. benchmark commercial PSU, as demonstrated by the removal of two model contaminants, rhodamine B and ofloxacin. The excellent stability of the composite is confirmed by extensive (100 hours) filtration tests in commercial water cartridges.

A three-dimensional porous Co@C/carbon foam hybrid monolith for exceptional oil-water separation

Frequent oil spill accidents and ever-increasing oily wastewater have become serious global environmental problems. To enhance the oil-sorption capacity and simplify the oil-recovery process, the construction of various advanced oil sorbents and oil-collecting devices is of great technological importance. Herein, a three-dimensional (3D) porous carbon-based hybrid monolith has been successfully fabricated, in which cobalt based metal-organic framework (Co-MOF) nanosheets are firstly immobilized on a carbon foam (CF) skeleton (denoted as Co-MOFs/CF) via a facile vapor-phase hydrothermal (VPH) technique followed by carbonation treatment under a N₂ atmosphere into Co@C/CF. The resulting Co@C/CF hybrid monolith exhibits an exceptional oil/water separation ability, including high sorption capacity (from 85 to 200 times its own weight toward various solvents and oils), easy collection and remarkable recyclability, as reflected by no obvious reduction in uptake capacity even after 20 cycles of repeated operation. More significantly, the oil-collecting device based on the proposed carbon-based hybrid monolith can rapidly, efficiently, and continuously collect oil from water surfaces, making it a promising candidate for oil-spill remediation.

Environmental application of three-dimensional graphene materials as adsorbents for dyes and heavy metals: Review on ice-templating method and adsorption mechanisms

The remediation of wastewater requires treatment technologies which are robust, efficient, simple to operate and affordable such as adsorption. Lately, three-dimensional (3D) graphene based materials have attracted significant attention as effective adsorbents for wastewater treatment. The intrinsic properties of 3D graphene structure such as large surface area and interconnected porous structure can facilitate the transport of pollutants into the 3D network and provide abundant active sites for trapping the pollutants. For the synthesis of 3D graphene structure, ice-templating is commonly practiced due to its facile steps, cost effectiveness and high scalability potential. This review covers the ice-templating fabrication technique for 3D graphene based materials and their application as adsorbents in eliminating dyes and heavy metals from aqueous media. The assembly mechanisms of the ice-templating fsynthesis are comprehensively discussed. Further discussion on the fundamental principles, critical process parameters and characteristics of ice-templated 3D graphene structures is also included. A thorough review on the mechanisms for batch adsorption of dyes and heavy metals is presented based on the structures and properties of the 3D graphene materials. The review further evaluates the dynamic adsorption in packed columns and the regeneration of 3D graphene based materials.

Rapid synthesis of three-dimensional sulfur-doped porous graphene via solid-state microwave irradiation for protein removal in plasma sample pretreatment

In this work, we prepared three-dimensional sulfur-doped porous graphene (3D-SPG) via solid-state microwave method and first introduced it to plasma sample pretreatment as adsorbent for the removal of proteins. The efficient heating effect of solid-state microwave irradiation endowed the as-prepared 3D-SPG with large specific surface area, porous structures and sulfur-doped conjugated π electron surface, thus producing an outstanding adsorbent for proteins adsorption. The adsorption behavior of 3D-SPG towards proteins was explored using bovine serum albumin (BSA) as the model protein and several kinetic models and isotherm models were employed to describe the adsorption process. The results indicated that BSA was adsorbed onto 3D-SPG in a monolayer manner with high adsorption capacity, and chemisorption and intraparticle diffusion was the rate-controlling step in proteins adsorption process. By applying 3D-SPG as adsorbent to remove proteins in real rat plasma, we found that 3D-SPG solid phase extraction (SPE) gained exceedingly high protein removal efficiency compared with other plasma pretreatment methods, suggesting that 3D-SPG SPE could effectively prevent the deterioration of column performance and decrease the interference caused by matrix effect in the follow-up analysis. Furthermore, in comparison with the tandem mass spectra results between 3D-SPG SPE and methanol precipitation, 3D-SPG SPE demonstrated the ability to extract the protein-binding metabolites which usually could not be extracted by methanol precipitation. This ability made 3D-SPG SPE of great value in untargeted metabolomics profiling, because 3D-SPG SPE could be a complementary method to methanol precipitation to improve the coverage of metabolites.

Simple fabrication of Chitosan/Graphene nanoplates composite spheres for efficient adsorption of acid dyes from aqueous solution

A facile method for the fabrication of crosslinked chitosan/graphene nanoplates composite sphere (CS/GNPs) was presented. The obtained samples were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopic (XPS) and thermogravimetric analysis (TGA). The adsorption activities of CS/GNPs for methyl orange (MO) and acid red 1 (AR1) were evaluated such as the effect of pH and GNPs content, as well as adsorption kinetics and isotherms. In view of practical, the reusability of CS/GNPs was also tested. The resulting adsorption capacity for MO is 230.91mgg^-1 and 132.94mgg^-1 for AR1, respectively. After saturated adsorption, CS/GNPs can be efficiently regenerated and reused with little uptake loss. Therefore, CS/GNPs is the apromising adsorbent with non-toxic, efficient, low-cost and easy to prepare for the dye removal.

Removal of cationic and anionic heavy metals from water by 1D and 2D-carbon structures decorated with magnetic nanoparticles

In this study, cobalt ferrites (C) decorated onto 2D material (porous graphene (PG)) and 1D material (carbon nanofibers (CNF)), denoted as PG-C and CNF-C nanocomposites, respectively, were synthesized using solvothermal process. The prepared nanocomposites were studied as magnetic adsorbents for the removal of lead (cationic) and chromium(VI) (anionic) metal ions. The structural and chemical analysis of synthesized nanocomposites was conducted using different characterization techniques including Brunauer–Emmett–Teller (BET) analysis, field emission-scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), high resolution-transmission electron microscopy (HR-TEM), vibrating sample magnetometer (VSM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Batch mode adsorption studies were conducted with the prepared nanocomposites to examine their maximum adsorption potential for lead and chromate ions. Performance parameters (time, pH, adsorbent dosage and initial ion concentrations) effecting the adsorption capacity of the nanocomposites were optimized. Different kinetic and isotherm models were examined to elucidate the adsorption process. Synthesized nanocomposites exhibited significant potential for the studied metal ions that can be further examined at pilot scale for the removal of metal ions from contaminated water.

Programmable assembly of pressure sensors using pattern-forming bacteria

Biological systems can generate microstructured materials that combine organic and inorganic components and possess diverse physical and chemical properties. However, these natural processes in materials fabrication are not readily programmable. Here, we use a synthetic-biology approach to mimic such natural processes to assemble patterned materials.. We demonstrate programmable fabrication of three-dimensional (3D) materials by printing engineered self-patterning bacteria on permeable membranes that serve as a structural scaffold. Application of gold nanoparticles to the colonies creates hybrid organic-inorganic dome structures. The dynamics of the dome structures' response to pressure is determined by their geometry (colony size, dome height and pattern), which is easily modified by varying the properties of the membrane (e.g., pore size and hydrophobicity). We generate resettable pressure sensors that process signals in response to varying pressure intensity and duration.

Highly Sensitive MoS2 Humidity Sensors Array for Noncontact Sensation

Recently, 2D materials exhibit great potential for humidity sensing applications due to the fact that almost all atoms are at the surface. Therefore, the quality of the material surface becomes the key point for sensitive perception. This study reports an integrated, highly sensitive humidity sensors array based on large-area, uniform single-layer molybdenum disulfide with an ultraclean surface. Device mobilities and on/off ratios decrease linearly with the relative humidity varying from 0% to 35%, leading to a high sensitivity of more than 10⁴ . The reversible water physisorption process leads to short response and decay times. In addition, the device array on a flexible substrate shows stable performance, suggesting great potential in future noncontact interface localization applications.

Ultrathin Bi Nanosheets with Superior Photoluminescence

Despite substantial progress in the science and technology of 2D nanomaterials, facile fabrication of ultrathin 2D metals remains challenging. Herein, an efficient hot-pressing method is developed to fabricate free-standing ultrathin Bi nanosheets from Bi nanoparticles. Highly crystalline Bi nanosheets with thickness as low as ≈2 nm and area of more than several micrometers are successfully fabricated on silicon substrates. The ultrathin Bi nanosheets exhibit morphology and structural dependent enhanced broad range photoemission in visible region of spectrum. Our cost-effective hot-pressing strategy may open an insight for production, application, and deficient fundamental understanding of other 2D semimetals/metalloids and noble metals.

In situ integration of graphene foam-titanium nitride based bio-scaffolds and microfluidic structures for soil nutrient sensors

It is challenging to integrate porous graphene foam (GF) and GF-based nanocomposites into microfluidic channels and even create microfluidic structures within these materials. This is because their irregular interior pore shape and geometry, rough exterior surface, and relatively large material thickness make it difficult to perform conventional photolithography and etching. This challenge has largely hindered the potential of using GF-based materials in microfluidics-based sensors. Here we present a simple approach to create well-defined flow-through channels within or across the GF-based materials, using a liquid-phase photopolymerization method. This method allows embedding of a nanocomposite-based scaffold of GF and titanium nitride nanofibers (GF-TiN NFs) into a channel structure, to realize flow-through microfluidic electrochemical sensors for detecting nitrate ions in agricultural soils. The unique GF-TiN nanocomposite provides high electrochemical reactivity, high electron transfer rate, improved loading capacity of receptor biomolecules, and large surface area, serving as an efficient electrochemical sensing interface with the help of immobilized specific enzyme molecules. The microfluidic sensor provides an ultralow limit of detection of 0.01 mg L^-1, a wide dynamic range from 0.01 to 442 mg L^-1, and a high sensitivity of 683.3 μA mg^-1 L cm^-2 for nitrate ions in real soil solution samples. The advantageous features of the GF-TiN nanocomposite, in conjunction with the in situ integration approach, will enable a promising microfluidic sensor platform to monitor soil ions for nutrient management towards sustainable agriculture.

Gram-scale synthesis of monodisperse sulfonated polystyrene nanospheres for rapid and efficient sequestration of heavy metal ions

Large-scale monodisperse sulfonated polystyrene nanospheres are synthesized for the removal of lead, copper and zinc ions from aqueous solutions.

Advanced Sorbents for Oil-Spill Cleanup: Recent Advances and Future Perspectives

Oil sorbents play a very important part in the remediation processes of oil spills. To enhance the oil-sorption properties and simplify the oil-recovery process, various advanced oil sorbents and oil-collecting devices based on them have been proposed recently. Here, we firstly discuss the design considerations for the fabrication of oil sorbents and describe recently developed oil sorbents based on modification strategy. Then, recent advances regarding oil sorbents mainly based on carbon materials and swellable oleophilic polymers are also presented. Subsequently, some additional properties are emphasized, which are required by oil sorbents to cope with oil spills under extreme conditions or to facilitate the oil-collection processes. Furthermore, some oil-collection devices based on oil sorbents that have been developed recently are shown. Finally, an outlook and challenges for the next generation of oil-spill-remediation technology based on oil-sorbents materials are given.

Micro-Nanocomposites in Environmental Management

Water pollution, a worldwide issue for the human society, has raised global concerns on environmental sustainability, calling for high-performance materials for effective treatments. Since the traditional techniques have inherent limitations in treatment speed and efficiency, nanotechnology is subsequently used as an environmental technology to remove pollutants through a rapid adsorption and degradation process. Therefore, here, various adsorbent and photodegradation composite materials leading to effective water remediation are summarized and predicted. Notably, recent advances in simultaneous adsorption and photodegradation micro-nanocomposites are outlined. Such materials can not only completely adsorb and remove contaminants, but the micro-nanocomposites can also be directly reused without further treatment. Finally, the future development of this unique system is discussed.

Highly Stretchable and Sensitive Strain Sensor Based on Facilely Prepared Three-Dimensional Graphene Foam Composite

Wearable strain sensors with excellent stretchability and sensitivity have emerged as a very promising field which could be used for human motion detection and biomechanical systems, etc. Three-dimensional (3D) graphene foam (GF) has been reported before for high-performance strain sensors, however, some problems such as high cost preparation, low sensitivity, and stretchability still remain. In this paper, we report a highly stretchable and sensitive strain sensor based on 3D GF and polydimethylsiloxane (PDMS) composite. The GF is prepared by assembly process from graphene oxide via a facile and scalable method and possesses excellent mechanical property which facilitates the infiltration of PDMS prepolymer into the graphene framework. The as-prepared strain sensor can be stretched as high as 30% of its original length and the gauge factor of this sensor is as high as 98.66 under 5% of applied strain. Moreover, the strain sensor shows long-term stability in 200 cycles of stretching-relaxing. Implementation of the device for monitoring the bending of elbow and finger results in reproducibility and various responses in the form of resistance change. Thus, the developed strain sensors exhibit great application potential in fields of biomechanical systems and human-interactive applications.

A Targeted "Capture" and "Removal" Scavenger toward Multiple Pollutants for Water Remediation based on Molecular Recognition

For the water remediation techniques based on adsorption, the long-standing contradictories between selectivity and multiple adsorbability, as well as between affinity and recyclability, have put it on weak defense amid more and more severe environment crisis. Here, a pollutant-targeting hydrogel scavenger is reported for water remediation with both high selectivity and multiple adsorbability for several pollutants, and with strong affinity and good recyclability through rationally integrating the advantages of multiple functional materials. In the scavenger, aptamers fold into binding pockets to accommodate the molecular structure of pollutants to afford perfect selectivity, and Janus nanoparticles with antibacterial function as well as anisotropic surfaces to immobilize multiple aptamers allow for simultaneously handling different kinds of pollutants. The scavenger exhibits high efficiencies in removing pollutants from water and it can be easily recycled for many times without significant loss of loading capacities. Moreover, the residual concentrations of each contaminant are well below the drinking water standards. Thermodynamic behavior of the adsorption process is investigated and the rate-controlling process is determined. Furthermore, a point of use device is constructed and it displays high efficiency in removing pollutants from environmental water. The scavenger exhibits great promise to be applied in the next generation of water purification systems.

Unconventional supercapacitors from nanocarbon-based electrode materials to device configurations

We review here recent developments in unconventional supercapacitors from nanocarbon-based electrode materials to device configurations.

Graphene foam with hierarchical structures for the removal of organic pollutants from water

Graphene foam with hierarchical structure was prepared. The developed material exhibited high porosity, hydrophobicity, excellent thermal stability, and can be for oil–water separation.

Layered mesoporous Mg(OH)2/GO nanosheet composite for efficient removal of water contaminants

Mg(OH)₂ flakes composited on GO nanosheets as triggered by the colloidal electrostatic self-assembly in an liquid laser ablation process. The as-synthesized composite presented excellent adsorption performance for MB and heavy metal ions.

Iron nanoparticles decoration onto three-dimensional graphene for rapid and efficient degradation of azo dye

Porous three-dimensional graphene (3DG) prepared by chemical vapor deposition, was utilized as a matrix to support nanoscale zero-valent iron (nZVI) particles. The strategies to manipulate the morphology, distribution and size of nZVI particles on the 3DG support were demonstrated. The immobilized nZVI particles with a size of 100 nm and dense deposition were achieved. A 94.5% of orange IV azo dye was removed in 60 min using nZVI particles immobilized 3DG (3DG-Fe), whereas only 70.9% was removed by free Fe nanoparticles in aqueous solution. Meanwhile, a reaction rate with orange IV of 3DG-Fe was approximately 5-fold faster than that of free Fe nanoparticles. The effects of 3DG-Fe dosage, dye concentration, reaction pH and temperature on dye degradation were also addressed. Those results imply that both lowering pH and increasing temperature led to higher reaction efficiency and rate. The kinetic data reveal that the degradation process of orange IV dye, modeled by the pseudo-first-order kinetics, might involve adsorption and redox reaction with an activation energy of 39.2 kJ/mol.

Ultrathin Two-Dimensional Nanomaterials

The past decade has witnessed an extraordinary increase in research progress on ultrathin two-dimensional (2D) nanomaterials in the fields of condensed matter physics, materials science, and chemistry after the exfoliation of graphene from graphite in 2004. This unique class of nanomaterials has shown many unprecedented properties and thus is being explored for numerous promising applications. In this Perspective, I briefly review the state of the art in the development of ultrathin 2D nanomaterials and highlight their unique advantages. Then, I discuss the typical synthetic methods and some promising applications of ultrathin 2D nanomaterials together with some personal insights on the challenges in this research area. Finally, on the basis of the current achievement on ultrathin 2D nanomaterials, I give some personal perspectives on potential future research directions.

High-Internal-Phase Emulsion Tailoring Polymer Amphiphilicity towards an Efficient NIR-Sensitive Bacteria Filter

Emulsions having a high internal-phase volume fraction—termed as HIPEs for high internal phase emulsions—are in high demand as templates for functional macroporous materials. Designing molecular surfactants with appropriate amphiphilicity plays a critical role in the HIPE preparation. In this study, successful tailoring of the amphiphilicity of the originally hydrophobic block co-polymer of polystyrene-b-polyvinylpyridine (PS-b-P4VP) is reported. In combination with trifluoroacetic acid, less than 5 wt% of the polymer-CF3COOH system is feasible as a surfactant for HIPE preparation; this is lower than the amounts typically needed for commonly used commercial surfactants. Using the HIPEs as templates, well-defined closed- and open-cell macroporous triacrylate-based monoliths are fabricated simply through the adjustment of the ratio of the water phase to oil phase. After coating the resulting macroporous material with polypyrrole nanoparticles, the system can be exploited as an NIR-sensitive filter for bacteria; it not only excludes oversized bacteria, but it also kills the bacteria with the help of NIR-induced heat.

Macroscopic Carbon Nanotube-based 3D Monoliths

Carbon nanotubes (CNTs) are one of the most promising carbon allotropes with incredible diverse physicochemical properties, thereby enjoying continuous worldwide attention since their discovery about two decades ago. From the point of view of practical applications, assembling individual CNTs into macroscopic functional and high-performance materials is of paramount importance. For example, multiscaled CNT-based assemblies including 1D fibers, 2D films, and 3D monoliths have been developed. Among all of these, monolithic 3D CNT architectures with porous structures have attracted increasing interest in the last few years. In this form, theoretically all individual CNTs are well connected and fully expose their surfaces. These 3D architectures have huge specific surface areas, hierarchical pores, and interconnected conductive networks, resulting in enhanced mass/electron transport and countless accessible active sites for diverse applications (e.g. catalysis, capacitors, and sorption). More importantly, the monolithic form of 3D CNT assemblies can impart additional application potentials to materials, such as free-standing electrodes, sensors, and recyclable sorbents. However, scaling the properties of individual CNTs to 3D assemblies, improving use of the diverse, structure-dependent properties of CNTs, and increasing the performance-to-cost ratio are great unsolved challenges for their real commercialization. This review aims to provide a comprehensive introduction of this young and energetic field, i.e., CNT-based 3D monoliths, with a focus on the preparation principles, current synthetic methods, and typical applications. Opportunities and challenges in this field are also presented.

Carbon-Based Sorbents with Three-Dimensional Architectures for Water Remediation

Over the past decade, carbon-based 3D architectures have received increasing attention in science and technology due to their fascinating properties, such as a large surface area, macroscopic bulky shape, and interconnected porous structures, enabling them to be one of the most promising materials for water remediation. This review summarizes the recent development in design, preparation, and applications of carbon-based 3D architectures derived from carbon nanotubes, graphene, biomass, or synthetic polymers for water treatment. After a brief introduction of these materials and their synthetic strategies, their applications in water treatment, such as the removal of oils/organics, ions, and dyes, are summarized. Finally, future perspective directions for this promising field are also discussed.

Three-dimensional graphene-based composites for energy applications

Three-dimensional (3D) graphene-based composites have drawn increasing attention for energy applications due to their unique structures and properties. By combining the merits of 3D graphene (3DG), e.g., a porous and interconnected network, a high electrical conductivity, a large accessible surface area, and excellent mechanical strength and thermal stability, with the high chemical/electrochemical activities of active materials, 3DG-based composites show great promise as high-performance electrode materials in various energy devices. This article reviews recent progress in 3DG-based composites and their applications in energy storage/conversion devices, i.e., supercapacitors, lithium-ion batteries, dye-sensitized solar cells, and fuel cells.

A facile method to fabricate functionally integrated devices for oil/water separation

In this paper, we present a facile method for the fabrication of a functionally integrated device, which has the multi-functions of the oil-containment boom, oil-sorption material, and water/oil-separating film, through a single immersion step in an ethanol solution of stearic acid. During the simple immersion process, the two dominant factors of superhydrophobicity, surface roughness and low-surface-energy coatings, could be accomplished simultaneously. The as-prepared functionally integrated device with superhydrophobicity/superoleophilicity displayed a lower density than that of water, such that it could float on water and act as an oil-containment boom; an efficient oil-absorbing property, which was attributed to the capillary effect caused by micrometer-sized pore structures and could be used as oil-sorption materials; a high oil/water separating efficiency which was suitable for water/oil-separating film. In this way, the functions of oil collection, absorption, and water/oil separation are integrated into a single device, and these functions could work independently, reducing the cost in terms of energy consumption and being versatile for a wide range of applications.

Superhydrophobic cuprous oxide nanostructures on phosphor-copper meshes and their oil-water separation and oil spill cleanup

A simple aqueous solution-immersion process was established to fabricate highly dense ordered Cu2O nanorods on commercial phosphor-copper mesh, with which the preparation was accomplished in distilled water. The present method, with the advantages of simple operation, low cost, short reaction time, and environmental friendliness, can be well adopted to fabricate desired Cu2O nanostructures on the phosphor-copper mesh under mild conditions. After surface modification with 1-dodecanethiol, the Cu2O nanostructure obtained on the phosphor-copper mesh exhibits excellent superhydrophobicity and superoleophilicity. Besides, a "mini boat" made from the as-prepared superhydrophobic phosphor-copper mesh can float freely on water surface and in situ collect oil from water surface. This demonstrates that the present approach, being facile, inexpensive, and environmentally friendly, could find promising application in oil-water separation and off shore oil spill cleanup.

Tailoring the water structure and transport in nanotubes with tunable interiors

Self-assembly of cyclic peptide nanotubes (CPNs) in polymer thin films has opened up the possibility of creating separation membranes with tunable nanopores that can differentiate molecules at the sub-nanometer level. While it has been demonstrated that the interior chemistry of the CPNs can be tailored by inserting functional groups in the nanopore lumen (mCPNs), a design strategy for picking the chemical modifications that lead to particular transport properties has not been established. Drawing from the knowledgebase of functional groups in natural amino acids, here we use molecular dynamics simulations to elucidate how bioinspired mutations influence the transport of water through mCPNs. We show that, at the nanoscale, factors besides the pore size, such as electrostatic interactions and steric effects, can dramatically change the transport properties. We recognize a novel asymmetric structure of water under nanoconfinement inside the chemically functionalized nanotubes and identify that the small non-polar glycine-mimic groups that minimize the steric constraints and confer a hydrophobic character to the nanotube interior are the fastest transporters of water. Our computationally developed experiments on a realistic material system circumvent synthetic challenges, and lay the foundation for bioinspired principles to tailor artificial nanochannels for separation applications such as desalination, ion-exchange and carbon capture.

Nitrogen doped graphene paper as a highly conductive, and light-weight substrate for flexible supercapacitors

In this work, we fabricated a lightweight (1.25 g cm⁻³) N doped reduced graphene (N-RGO) paper through a combined method of vacuum filtration and thermal treatment under an ammonia atmosphere.