Silver-modified nanosized ferroelectrics as a novel photocatalyst

Piezo-Flexocatalysis of Single-Atom Pt-Loaded Graphitic Carbon Nitride

This study develops a single-atom Pt-loaded graphitic carbon nitride (SA-Pt/CN) and evaluates its piezo-flexocatalytic properties by conducting a hydrogen evolution reaction (HER) and Rhodamine B (RB) dye degradation test under ultrasonic vibration in the dark. SA-Pt/CN has a hydrogen gas yield of 1283.8 µmol g-1 h-1, which is 23.3 times higher than that of pristine g-C3N4. Moreover, SA-Pt/CN enhances the dye degradation reaction rate by ≈2.3 times compared with the pristine sample. SA-Pt/CN exhibits lattice distortion and strain gradient enlargement caused by the single atom Pt at the N sites of g-C3N4, which disrupts the symmetric structure and contributes to the enhancement of piezoelectric and flexoelectric polarization. As far as it is known, this is the first study to investigate the piezo-flexocatalytic reaction of SA-Pt/CN without light irradiation and provides new insights into single-atom piezocatalysts.

Imogolite Nanotubes and Their Permanently Polarized Bifunctional Surfaces for Photocatalytic Hydrogen Production

To date, imogolite nanotubes (INTs) have been primarily used for environmental applications such as dye and pollutant degradation. However, imogolite's well-defined porous structure and distinctive electro-optical properties have prompted interest in the system's potential for energy-relevant chemical reactions. The imogolite structure leads to a permanent intrawall polarization arising from the presence of bifunctional surfaces at the inner and outer tube walls. Density functional theory simulations suggest such bifunctionality to encompass also spatially separated band edges. Altogether, these elements make INTs appealing candidates for facilitating chemical conversion reactions. Despite their potential, the exploitation of imogolite's features for photocatalysis is at its infancy, thence relatively unexplored. This perspective overviews the basic physical-chemical and optoelectronical properties of imogolite nanotubes, emphasizing their role as wide bandgap insulator. Imogolite nanotubes have multifaceted properties that could lead to beneficial outcomes in energy-related applications. This work illustrates two case studies demonstrating a step-forward on photocatalytic hydrogen production achieved through atomic doping or metal co-catalyst. INTs exhibit potential in energy conversion and storage, due to their ability to accommodate functions such as enhancing charge separation and influencing the chemical potentials of interacting species. Yet, tapping into potential for energy-relevant application needs further experimental research, computational, and theoretical analysis.

Metformin-Mediated Fast Charge-Reversal Nanohybrid for Deep Penetration Piezocatalysis-Augmented Chemodynamic Immunotherapy of Cancer

Immune checkpoint blockade (ICB) therapy still suffers from insufficient immune response and adverse effect of ICB antibodies. Chemodynamic therapy (CDT) has been demonstrated to be an effective way to synergize with ICB therapy. However, a low generation rate of reactive oxygen species and poor tumor penetration of CDT platforms still decline the immune effects. Herein, a charge-reversal nanohybrid Met@BF containing both Fe3O4 and BaTiO3 nanoparticles in the core and Metformin (Met) on the surface was fabricated for tumor microenvironment (TME)- and ultrasound (US)-activated piezocatalysis-chemodynamic immunotherapy of cancer. Interestingly, Met@BF had a negative charge in blood circulation, which was rapidly changed into positive when exposed to acidic TME attributed to quaternization of tertiary amine in Met, facilitating deep tumor penetration. Subsequently, with US irradiation, Met@BF produced H2O2 based on piezocatalysis of BaTiO3, which greatly enhanced the Fenton reaction of Fe3O4, thus boosting robust antitumor immune response. Furthermore, PD-L1 expression was inhibited by the local released Met to further augment the antitumor immune effect, achieving effective inhibitions for both primary and metastatic tumors. Such a combination of piezocatalysis-enhanced chemodynamic therapy and Met-mediated deep tumor penetration and downregulation of PD-L1 provides a promising strategy to augment cancer immunotherapy.

Research progress on photocatalytic reduction of CO2 based on ferroelectric materials

Transforming CO2 into renewable fuels or valuable carbon compounds could be a practical means to tackle the issues of global warming and energy crisis. Photocatalytic CO2 reduction is more energy-efficient and environmentally friendly, and offers a broader range of potential applications than other CO2 conversion techniques. Ferroelectric materials, which belong to a class of materials with switchable polarization, are attractive candidates as catalysts due to their distinctive and substantial impact on surface physical and chemical characteristics. This review provides a concise overview of the fundamental principles underlying photocatalysis and the mechanism involved in CO2 reduction. Additionally, the composition and properties of ferroelectric materials are introduced. This review expands on the research progress in using ferroelectric materials for photocatalytic reduction of CO2 from three perspectives: directly as a catalyst, by modification, and construction of heterojunctions. Finally, the future potential of ferroelectric materials for photocatalytic CO2 reduction is presented. This review may be a valuable guide for creating reasonable and more effective photocatalysts based on ferroelectric materials.

A dielectric electrolyte composite with high lithium-ion conductivity for high-voltage solid-state lithium metal batteries

The ionic conductivity of composite solid-state electrolytes does not meet the application requirements of solid-state lithium (Li) metal batteries owing to the harsh space charge layer of different phases and low concentration of movable Li⁺. Herein, we propose a robust strategy for creating high-throughput Li⁺ transport pathways by coupling the ceramic dielectric and electrolyte to overcome the low ionic conductivity challenge of composite solid-state electrolytes. A highly conductive and dielectric composite solid-state electrolyte is constructed by compositing the poly(vinylidene difluoride) matrix and the BaTiO₃-Li_0.33La_0.56TiO_3-x nanowires with a side-by-side heterojunction structure (PVBL). The polarized dielectric BaTiO₃ greatly promotes the dissociation of Li salt to produce more movable Li⁺, which locally and spontaneously transfers across the interface to coupled Li_0.33La_0.56TiO_3-x for highly efficient transport. The BaTiO₃-Li_0.33La_0.56TiO_3-x effectively restrains the formation of the space charge layer with poly(vinylidene difluoride). These coupling effects contribute to a quite high ionic conductivity (8.2 × 10^-4 S cm^-1) and lithium transference number (0.57) of the PVBL at 25 °C. The PVBL also homogenizes the interfacial electric field with electrodes. The LiNi_0.8Co_0.1Mn_0.1O₂/PVBL/Li solid-state batteries stably cycle 1,500 times at a current density of 180 mA g^-1, and pouch batteries also exhibit an excellent electrochemical and safety performance.

Ultrasound-Triggered Piezocatalysis for Selectively Controlled NO Gas and Chemodrug Release to Enhance Drug Penetration in Pancreatic Cancer

Nitric oxide (NO) is drawing widespread attention in treating pancreatic ductal adenocarcinoma (PDAC) as a safe and therapeutically efficient technique through modulating the dense fibrotic stroma in the tumor microenvironment to enhance drug penetration. Considerable NO nanogenerators and NO releasing molecules have been developed to shield the systemic toxicity caused by free diffusion of NO gas. However, on-demand controlled release of NO and chemotherapy drugs at tumor sites remains a problem limited by the complex and dynamic tumor microenvironment. Herein, we present an ultrasound-responsive nanoprodrug of CPT-t-R-PEG₂₀₀₀@BaTiO₃ (CRB) which encapsulates piezoelectric nanomaterials barium titanate nanoparticle (BaTiO₃) with amphiphilic prodrug molecules that consisted of thioketal bond (t) linked chemotherapy drug camptothecin (CPT) and NO-donor l-arginine (R). Based on ultrasound-triggered piezocatalysis, BaTiO₃ can continuously generate ROS in the hypoxic tumor environment, which induces a cascade of reaction processes to break the thioketal bond to release CPT and oxidize R to release NO, simultaneously delivering CPT and NO to the tumor site. It is revealed that CRB shows a uniform size distribution, prolonged blood circulation time, and excellent tumor targeting ability. Moreover, controlled release of CPT and NO were observed both in vitro and in vivo under the stimulation of ultrasound, which is beneficial to the depletion of dense stroma and subsequently enhanced delivery and efficacy of CPT. Taken together, CRB significantly increased the antitumor efficacy against highly malignant Panc02 tumors in mice through inhibiting chemoresistance, representing a feasible approach for targeted therapies against Panc02 and other PDAC.

Bipolar charge collecting structure enables overall water splitting on ferroelectric photocatalysts

Ferroelectrics are considered excellent photocatalytic candidates for solar fuel production because of the unidirectional charge separation and above-gap photovoltage. Nevertheless, the performance of ferroelectric photocatalysts is often moderate. A few studies showed that these types of photocatalysts could achieve overall water splitting. This paper proposes an approach to fabricating interfacial charge-collecting nanostructures on positive and negative domains of ferroelectric, enabling water splitting in ferroelectric photocatalysts. The present study observes efficient accumulations of photogenerated electrons and holes within their thermalization length (~50 nm) around Au nanoparticles located in the positive and negative domains of a BaTiO3 single crystal. Photocatalytic overall water splitting is observed on a ferroelectric BaTiO3 single crystal after assembling oxidation and reduction cocatalysts on the positively and negatively charged Au nanoparticles, respectively. The fabrication of bipolar charge-collecting structures on ferroelectrics to achieve overall water splitting offers a way to utilize the energetic photogenerated charges in solar energy conversion.

Enhanced piezotronics by single-crystalline ferroelectrics for uniformly strengthening the piezo-photocatalysis of electrospun BaTiO3@TiO2 nanofibers

Turning the built-in electric field by modulating the morphology and microstructure of ferroelectric materials is considered a viable approach to enhancing the piezo-photocatalytic activity of the ferroelectric/oxide semiconductor heterojunctions. Here, hydrothermally synthesized single-crystalline BaTiO₃ nanoparticles are employed to construct BaTiO₃@TiO₂ hybrid nanofibers by sol-gel assisted electrospinning of TiO₂ nanofibers and annealing. Because of the obvious enhancement of the synergetic piezo-photocatalytic effect under both ultrasonic and ultraviolet (UV) light irradiation, the piezo-photocatalytic degradation rate constant (k) of BaTiO₃@TiO₂ hybrid nanofibers on methyl orange (MO) reaches 14.84 × 10^-2 min^-1, which is approximately seven fold that for piezocatalysis and six fold that for photocatalysis. Moreover, BaTiO₃@TiO₂ core-shell nanoparticles are also synthesized for comparison purposes to assess the influence of microstructure on the piezo-photocatalysis by a wet-chemical coating of TiO₂ on BaTiO₃ nanoparticles. Such a high piezo-photocatalytic activity is attributed to the enhancement of the piezotronic effect by the single-crystalline ferroelectric nanoparticles and the nanoconfinement effect caused by the one-dimensional boundary of nanofibers with high specific surface areas. The mechanically induced uniform local built-in electric fields originated from the single-crystalline ferroelectric nanoparticles can enhance the separation of photogenerated electron and hole pairs and promote the formation of free hydroxyl radicals, resulting in a strong piezotronic effect boosted photochemical degradation of organic dye. This work introduces the single-crystalline ferroelectrics to construct ferroelectric/oxide semiconductor heterojunctions, and the enhanced local piezotronic effect uniformly strengthens the photochemical reactivity, which offers a new option to design high-efficiency piezo-photocatalysts for pollutant treatment.

Enhanced charge separation in La2NiO4 nanoplates by coupled piezocatalysis and photocatalysis for efficient H2 evolution

Photocatalytic hydrogen evolution is one promising method for solar energy conversion, but the rapid charge recombination limits its efficiency. To this end, in this work, grain size, and hence the charge carrier migration path, is reduced by lowering the synthesis temperature of two-dimensional visible light-responsive La₂NiO₄ perovskite. Interestingly, the hydrogen yield for the piezoelectric response of La₂NiO₄ under only 40 kHz ultrasonic vibration is as high as 680 μmol h^-1 g^-1, which is 80 times that under only 600 mW cm^-2 visible light irradiation. More surprisingly, the hydrogen production rate under both light illumination and ultrasonic vibration is 129 times higher than under visible light irradiation alone. Clearly, a synergistic effect exists between piezocatalysis and photocatalysis. The hydrogen production activity of the samples with water splitting can reach 1097 μmol h^-1 g^-1 without any sacrificial reagent or co-catalyst, when the light intensity reaches about 1000 mW cm^-2, which is a much higher hydrogen evolution rate by piezo-photocatalysis than is achieved by either piezocatalysis or photocatalysis individually. Further analysis indicates that the internal electric field generated by deformation of the La₂NiO₄ edge under piezoelectric action facilitates the directional separation and migration of photogenerated charges, which in turn significantly enhances the efficiency of use of photogenerated charges for hydrogen production. The investigation here provides a novel approach to design a new reaction system for hydrogen production by coupling multiple external physical fields.

Ferroelectrics in photocatalysis

The rapid development of industrialization and population brings water and air pollution and energy crisis. Solar driven catalysis is expected to relieve above issues. However, low efficiency of solar conversion limited by poor light harvesting and serious charge recombination of semiconductors and high surface reaction barriers is far from the satisfactory of industrial request. Ferroelectrics have been considered as promising photocatalysts to overcome these shortcomings. Herein, perovskite ferroelectrics such as BaTiO 3 , PbTiO 3 and LiNbO 3 , layered bismuth-based ferroelectrics like BiFeO 3 , Bi 2 WO 6 , Bi 2 MoO 6 , etc. and other ferroelectrics have been introduced, and their crystal structure, polarity source and synthetic method have been highlighted. Then, the research progress of ferroelectrics for photocatalysis has been summarized, including pollution degradation, water splitting and CO 2 reduction. Finally, the current challenges and future prospects of ferroelectric photocatalysts have been provided. The purpose of this review is not only to provide a timely summary for the application of ferroelectrics in photocatalysis, but also to present a deep insight and guideline for the future research works of ferroelectrics .

Atomic-Level Charge Separation Strategies in Semiconductor-Based Photocatalysts

Semiconductor-based photocatalysis as a productive technology furnishes a prospective solution to environmental and renewable energy issues, but its efficiency greatly relies on the effective bulk and surface separation of photoexcited charge carriers. Exploitation of atomic-level strategies allows in-depth understanding on the related mechanisms and enables bottom-up precise design of photocatalysts, significantly enhancing photocatalytic activity. Herein, the advances on atomic-level charge separation strategies toward developing robust photocatalysts are highlighted, elucidating the fundamentals of charge separation and transfer processes and advanced probing techniques. The atomic-level bulk charge separation strategies, embodied by regulation of charge movement pathway and migration dynamic, boil down to shortening the charge diffusion distance to the atomic-scale, establishing atomic-level charge transfer channels, and enhancing the charge separation driving force. Meanwhile, regulating the in-plane surface structure and spatial surface structure are summarized as atomic-level surface charge separation strategies. Moreover, collaborative strategies for simultaneous manipulation of bulk and surface photocharges are also introduced. Finally, the existing challenges and future prospects for fabrication of state-of-the-art photocatalysts are discussed on the basis of a thorough comprehension of atomic-level charge separation strategies.

Ag-nanoparticles-loaded Ba0.85Ca0.15Ti0.9Zr0.1O3 for multicatalytic dye degradation

Ba0.85Ca0.15Ti0.9Zr0.1O3 (BCZTO) ferroelectric ceramic loaded with Ag nanoparticles (NPs) was explored for its photo/piezocatalytic performance. The presence of Ag loading on BCZTO ceramic was confirmed using electron microscopes. X-ray photoelectron spectroscopy revealed the metallic chemical state of Ag NPs loaded on the surface of BCZTO ceramic. The absorbance spectrum of the Ag-loaded BCZTO sample showed a visible light absorption hump due to the phenomenon of surface plasmonic resonance. During the photocatalysis process, the [Formula: see text]99% of rhodamine B (RB) dye was degraded in aqueous solution using the Ag-loaded BCZTO sample, showing its promising photocatalysis activity. During the piezocatalysis process, the [Formula: see text]95% of RB dye was degraded using the Ag-loaded BCZTO sample, showing its promising piezocatalytic activity. The ·OH radical species were found responsible for the photocatalytic and piezocatalytic performance. The photo/piezocatalytic performance was found to be consistent over five cycles, indicating promising reusability of the Ag-loaded BCZTO sample.

Morphology-Governed Performance of Plasmonic Photocatalysts

Plasmonic photocatalysts have been extensively studied for the past decade as a possible solution to energy crisis and environmental problems. Although various reports on plasmonic photocatalysts have been published, including synthesis methods, applications, and mechanism clarifications, the quantum yields of photochemical reactions are usually too low for commercialization. Accordingly, it has been proposed that preparation of plasmonic photocatalysts with efficient light harvesting and inhibition of charge carriers’ recombination might result in improvement of photocatalytic activity. Among various strategies, nano-architecture of plasmonic photocatalysts seems to be one of the best strategies, including the design of properties for both semiconductor and noble-metal-deposits, as well as the interactions between them. For example, faceted nanoparticles, nanotubes, aerogels, and super-nano structures of semiconductors have shown the improvement of photocatalytic activity and stability. Moreover, the selective deposition of noble metals on some parts of semiconductor nanostructures (e.g., specific facets, basal or lateral surfaces) results in an activity increase. Additionally, mono-, bi-, and ternary-metal-modifications have been proposed as the other ways of performance improvement. However, in some cases, the interactions between different noble metals might cause unwanted charge carriers’ recombination. Accordingly, this review discusses the recent strategies on the improvements of the photocatalytic performance of plasmonic photocatalysts.

Piezocatalytic Tumor Therapy by Ultrasound-Triggered and BaTiO3 -Mediated Piezoelectricity

Ultrasound theranostics features non-invasiveness, minor energy attenuation, and high tissue-penetrating capability, and is playing ever-important roles in the diagnosis and therapy of diseases in clinics. Herein, ultrasound is employed as a microscopic pressure resource to generate reactive oxygen species (ROS) for piezocatalytic tumor therapy under catalytic mediation by piezoelectric tetragonal BaTiO₃ (T-BTO). Under the ultrasonic vibration, the electrons and holes are unpaired and they are separated by the piezoelectricity, resulting in the establishment of a strong built-in electric field, which subsequently catalyzes the generation of ROS such as toxic hydroxyl (^• OH) and superoxide radicals (^• O₂ ^- ) in situ for tumor eradication. This modality shows intriguing advantages over typical sonoluminescence-activated sonodynamic therapy, such as more stable sensitizers and dynamical control of redox reaction outcomes. Furthermore, according to the finite element modeling simulation, the built-in electric field is capable of modulating the band alignment to make the toxic ROS generation energetically favorable. Both detailed in vitro cellular level evaluation and in vivo tumor xenograft assessment have demonstrated that an injectable T-BTO-nanoparticles-embedded thermosensitive hydrogel will substantially induce ultrasound irradiation-triggered cytotoxicity and piezocatalytic tumor eradication, accompanied by high therapeutic biosafety in vivo.

Effect of Dual-Cocatalyst Surface Modification on Photodegradation Activity, Pathway, and Mechanisms with Highly Efficient Ag/BaTiO3/MnOx

Cocatalyst surface-loading has been regarded as an effective strategy to promote solar-energy-conversion efficiency. However, the potential influence of surface modification with cocatalysts on the photodegradation pathway and the underlying mechanisms is still unclear. Herein, we have used ferroelectric BaTiO₃ as the substrate, and both the reduction cocatalyst Ag and the oxidation cocatalyst MnO_x have been successfully loaded onto BaTiO₃ simultaneously by a one-step photodeposition method as evidenced by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM). The influence of dual-cocatalyst surface-loading on photodegradation of rhodamine B has been systematically investigated for the first time. First, the dual-cocatalyst-modified BaTiO₃ outperformed over the single-cocatalyst-loaded BaTiO₃, and the photodegradation rate of Ag/BaTiO₃/MnO_x is about 3 times and 12 times as high as that of Ag/BaTiO₃ and BaTiO₃/MnO_x, respectively. The credit is given to the synergistic effect between the reduction and oxidation cocatalysts, prompting charge carrier separation and migration as verified by the transient photocurrent, electrochemical impedance, and photoluminescence (PL) spectrum investigation. Second, in addition to the boosted photodegradation activity, the photodegradation pathway is found to be altered as well when using Ag/BaTiO₃/MnO_x. High-performance liquid chromatography (HPLC) analysis indicated that a highly selective stepwise deethylation process predominates over chromophore cleavage in the Ag/BaTiO₃/MnO_x system, while it is reverse for the Ag/BaTiO₃ system. This phenomenon is attributed to the different dye molecule adsorption modes. Furthermore, the radical trapping experiment shows that holes play a major role in the degradation process, and the recycle test proves the excellent stability of Ag/BaTiO₃/MnO_x. Our findings may add another layer of understanding depth to cocatalyst surface modification in photodegradation applications.

Particle size effect on the photocatalytic kinetics of barium titanate powders

Particle size plays both a chemical and physical role in fields such as catalysis where a substantial surface-to-volume ratio is required in addition to photon utilization efficiency.

Superior adsorption capability and excellent photocatalytic activity derived from the ferroelectric external screening effect in Bi3TiNbO9 single-crystal nanosheets

A new strategy based on the ferroelectric external screening effect was used to enhance dye adsorption and degradation activity.

B-site modified photoferroic Cr3+-doped barium titanate nanoparticles: microwave-assisted hydrothermal synthesis, photocatalytic and electrochemical properties

We report on the synthesis of photoferroic Cr3+-doped BaTiO3 nanoparticles with nominal Cr content ranging from 2-8 mol% by a microwave-assisted hydrothermal method. The absorption properties of the doped systems are significantly enhanced due to the d-d band transition of Cr3+/4+. The structural properties of the materials are examined on the basis of lattice distortions given by the tolerance factor and microstrain. Raman scattering provides complementary information on the lattice vibrations indicating a softening of the longitudinal optic (LO) phonon mode located at 716 cm-1 with increasing Cr concentration. The charge transport properties investigated through electrochemical impedance spectroscopy (EIS) demonstrate that there is a reduction in the charge transfer resistance from 5.2 Ω to 4.3 Ω for the undoped and 4 mol% Cr3+-doped respectively, which favors the degradation kinetics. The photo-oxidation ability of the systems is evaluated by time evolution of photodegradation of methyl orange under standardized solar irradiation. The experimental results confirm that the best photocatalytic performance is achieved with the 4 mol% Cr3+-doped BaTiO3 nanoparticles, which is ∼2.7 times higher than for the undoped sample. Evidence of superoxide radical being the dominant active species is provided by in situ reactive oxide species (ROS) capture experiments.

A surface plasmon resonance enhanced photoelectrochemical immunoassay based on perovskite metal oxide@gold nanoparticle heterostructures

A visible light-driven photoelectrochemical immunoassay was designed for PSA detection by using perovskite metal oxide@gold nanoparticle heterostructures.

Ferroelectric enhanced Z-scheme P-doped g-C3N4/PANI/BaTiO3 ternary heterojunction with boosted visible-light photocatalytic water splitting

Surface polarization promotes the charge separation efficiency of PCN/PANI/BTO ternary heterojunction, resulting in an enhanced visible-light photocatalytic hydrogen production activity.

Imogolite Nanotubes: A Flexible Nanoplatform with Multipurpose Applications

Among a wide variety of inorganic nanotubes, imogolite nanotubes (INTs) represent a model of nanoplatforms with an untapped potential for advanced technological applications. Easily synthesized by sol-gel methods, these nanotubes are directly obtained with a monodisperse pore size. Coupled with the possibility to adjust their surface properties by using straightforward functionalization processes, INTs form a unique class of diameter-controlled nanotubes with functional interfaces. The purpose of this review is to provide the reader with an overview of the synthesis and functionalization of INTs. The properties of INTs will be stated afterwards into perspective with the recent development on their applications, in particular for polymer/INTs nanocomposites, molecular confinement or catalysis.

Internal Polarization Modulation in Bi2 MoO6 for Photocatalytic Performance Enhancement under Visible-Light Illumination

A built-in electric field from polarization inside polar photocatalysts could provide the driving force for photogenerated electrons and holes to move in opposite directions for better separation to improve their photocatalytic performance. The photocatalytic performance of a polar photocatalyst of Bi₂ MoO₆ has been enhanced through the precise control of its structure to increase internal polarization. DFT calculations predicted that a shortened crystal lattice parameter b in Bi₂ MoO₆ could induce larger internal polarization, which was achieved by the modulation of the pH of the reaction solution during a solvothermal synthetic process. A series of Bi₂ MoO₆ samples were created with reaction solutions of pH≈1, 4, and 8; the crystal lattice parameter b was found to decrease gradually with increasing solution pH. Accordingly, these Bi₂ MoO₆ samples demonstrated a gradually enhanced photocatalytic performance with decreasing crystal lattice parameter b, as demonstrated by the photocatalytic degradation of sulfamethoxazole/phenol and disinfection of Staphylococcus aureus bacteria under visible-light illumination due to improved photogenerated charge-carrier separation. This study demonstrates an innovative design strategy for materials to further enhance the photocatalytic performance of polar photocatalysts for a broad range of technical applications.

Crystalline Structure, Defect Chemistry and Room Temperature Colossal Permittivity of Nd-doped Barium Titanate

Dielectric materials with high permittivity are strongly demanded for various technological applications. While polarization inherently exists in ferroelectric barium titanate (BaTiO3), its high permittivity can only be achieved by chemical and/or structural modification. Here, we report the room-temperature colossal permittivity (~760,000) obtained in xNd: BaTiO3 (x = 0.5 mol%) ceramics derived from the counterpart nanoparticles followed by conventional pressureless sintering process. Through the systematic analysis of chemical composition, crystalline structure and defect chemistry, the substitution mechanism involving the occupation of Nd3+ in Ba2+ -site associated with the generation of Ba vacancies and oxygen vacancies for charge compensation has been firstly demonstrated. The present study serves as a precedent and fundamental step toward further improvement of the permittivity of BaTiO3-based ceramics.

Ferroelectric-Enhanced Polysulfide Trapping for Lithium-Sulfur Battery Improvement

A brand new polysulfide entrapping strategy based on the ferroelectric effect has been demonstrated for the first time. By simply adding the nano-ferroelectrics (BaTiO₃ nanoparticles) into the cathode, the heteropolar polysulfides can be anchored within the cathode due to the internal electric field originated from the spontaneous polarization BaTiO₃ nanoparticles, and thus significantly improving the cycle stability of Li-S batteries.

Chemically Selective Alternatives to Photoferroelectrics for Polarization-Enhanced Photocatalysis: The Untapped Potential of Hybrid Inorganic Nanotubes

Linear-scaling density functional theory simulation of methylated imogolite nanotubes (NTs) elucidates the interplay between wall-polarization, bands separation, charge-transfer excitation, and tunable electrostatics inside and outside the NT-cavity. The results suggest that integration of polarization-enhanced selective photocatalysis and chemical separation into one overall dipole-free material should be possible. Strategies are proposed to increase the NT polarization for maximally enhanced electron-hole separation.

Developing a ferroelectric nanohybrid for enhanced photocatalysis

We develop a ferroelectric nanohybrid that improves photocatalytic efficiency by reducing the recombination of holes and electron charge carriers.

The potential of imogolite nanotubes as (co-)photocatalysts: a linear-scaling density functional theory study

We report a linear-scaling density functional theory (DFT) study of the structure, wall-polarization absolute band-alignment and optical absorption of several, recently synthesized, open-ended imogolite (Imo) nanotubes (NTs), namely single-walled (SW) aluminosilicate (AlSi), SW aluminogermanate (AlGe), SW methylated aluminosilicate (AlSi-Me), and double-walled (DW) AlGe NTs. Simulations with three different semi-local and dispersion-corrected DFT-functionals reveal that the NT wall-polarization can be increased by nearly a factor of four going from SW-AlSi-Me to DW-AlGe. Absolute vacuum alignment of the NT electronic bands and comparison with those of rutile and anatase TiO2 suggest that the NTs may exhibit marked propensity to both photo-reduction and hole-scavenging. Characterization of the NTs' band-separation and optical properties reveal the occurrence of (near-)UV inside-outside charge-transfer excitations, which may be effective for electron-hole separation and enhanced photocatalytic activity. Finally, the effects of the NTs' wall-polarization on the absolute alignment of electron and hole acceptor states of interacting water (H2O) molecules are quantified and discussed.

Novel lead-free ferroelectric film by ultra-small Ba0.8Sr0.2TiO3nanocubes assembled for a large electrocaloric effect

The assembled Ba_0.8Sr_0.2TiO₃thin films formed by precisely designed building blocks of ferroelectric nanocubes have a large electrocaloric effect (9.1 K).

Enhanced photocatalytic activity on polarized ferroelectric KNbO3

In this paper, we demonstrate the enhanced photodegradation of rhodamine B on polarized ferroelectric KNbO₃ (KNO) particles.

Polarization-driven catalysis via ferroelectric oxide surfaces

Ferroelectric polarization can tune the surface chemistry: enhancing technologically important catalytic reactions such as NO_x direct decomposition and SO₂ oxidation.