1
|
Beek L, Skirde JE, Akdere M, Gries T. Bio-Inspired Textiles for Self-Driven Oil-Water Separation-A Simulative Analysis of Fluid Transport. Biomimetics (Basel) 2024; 9:261. [PMID: 38786471 PMCID: PMC11118946 DOI: 10.3390/biomimetics9050261] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2024] [Revised: 04/18/2024] [Accepted: 04/24/2024] [Indexed: 05/25/2024] Open
Abstract
In addition to water repellency, superhydrophobic leaves of plants such as Salvinia molesta adsorb oil and separate it from water surfaces. This phenomenon has been the inspiration for a new method of oil-water separation, the bionic oil adsorber (BOA). In this paper, we show how the biological effect can be abstracted and transferred to technical textiles, in this case knitted spacer textiles hydrophobized with a layered silicate, oriented at the biology push approach. Subsequently, the transport of the oil within the bio-inspired textile is analyzed by a three-dimensional fluid simulation. This fluid simulation shows that the textile can be optimized by reducing the pile yarn length, increasing the pile yarn spacing, and increasing the pile yarn diameter. For the first time, it has been possible with this simulation to optimize the bio-inspired textile with regard to oil transport with little effort and thus enable the successful implementation of a self-driven and sustainable oil removal method.
Collapse
Affiliation(s)
- Leonie Beek
- Institut für Textiltechnik of RWTH Aachen University, Otto-Blumenthal-Straße 1, 52074 Aachen, Germany; (J.-E.S.); (M.A.); (T.G.)
| | | | | | | |
Collapse
|
2
|
Long F, Zhang X, Li X, Sun F, Zhou T, Liu L. Ultrathin Water-Responsive Zwitterionic Hydrogel Brush Coatings for Long-Term Corrosion Protection. ACS APPLIED MATERIALS & INTERFACES 2024; 16:1416-1427. [PMID: 38149814 DOI: 10.1021/acsami.3c13841] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/28/2023]
Abstract
Preventing metal corrosion has usually been associated with water-repellent coatings that inhibit the penetration of aggressive chloride ions. Contrary to this conventional wisdom, we engineered ultrathin superhydrophilic zwitterionic hydrogel brushes rooted in a nanoporous anodic aluminum oxide (AAO) substrate that effectively hampered the adsorption of hydrated chloride ions (Cl-·H2O) on the Al alloy surface. The hydrogel brush coating enhanced corrosion resistance by 3 orders of magnitude, with corrosion current density declining from 1.518 to 1.567 × 10-3 μA cm-2. Despite suffering from long-term salt-spaying tests, zwitterionic hydrogel brush coating retained 2 orders of magnitude of corrosion resistance. Direct Raman spectroscopic evidence manifested that interfacial water comprised both highly ordered hydrogen-bonded water and disordered water containing hydrated Cl- ions. Under the hydration effect of zwitterionic hydrogel brushes, an interfacial disordered water structure dynamically transformed into a hydrogen-bonded water film. We correlated the structure and quantities of interfacial water with the corrosion current density and chloride adsorption. Hydrogen-bonded water improved by zwitterionic hydrogel brushes weakened the affinity and adsorption of hydrated Cl- ion water on the oxide film, resulting in excellent corrosion protection. Therefore, employing localized hydration tuning strategies, these findings are anticipated to generally empower ordered interfacial water to enhance metal corrosion resistance through precise interfacial engineering.
Collapse
Affiliation(s)
- Fei Long
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
| | - Xinwen Zhang
- Institute of Materials, Henan Academy of Sciences, Zhengzhou, Henan 450046, People's Republic of China
| | - Xuan Li
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
| | - Fei Sun
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
| | - Tong Zhou
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
- School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
| | - Lei Liu
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
| |
Collapse
|
3
|
Gomes AR, Freitas ÍN, Luz TMD, Guimarães ATB, Araújo APDC, Kamaraj C, Rahman MM, Islam ARMT, Arias AH, Silva FBD, Karthi S, Cruz-Santiago O, Silva FG, Malafaia G. Multiple endpoints of polyethylene microplastics toxicity in vascular plants of freshwater ecosystems: A study involving Salvinia auriculata (Salviniaceae). JOURNAL OF HAZARDOUS MATERIALS 2023; 450:131069. [PMID: 36857830 DOI: 10.1016/j.jhazmat.2023.131069] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/30/2022] [Revised: 01/21/2023] [Accepted: 02/21/2023] [Indexed: 06/18/2023]
Abstract
More recently, the number of studies on the impacts of microplastics (MPs) on plants has drawn attention considerably. However, many of these studies focused on terrestrial plants, with vascular plants from freshwater ecosystems being little studied. Thus, we aimed to evaluate the possible effects of exposure of Salvinia auriculata, for 28 days, to different concentrations of polyethylene MPs (PE MPs - diameter: 35.46 ± 18.17 µm) (2.7 ×108 and 8.1 ×108 particles/m3), using different biomarkers. Our data indicated that exposure to PE MPs caused alterations in plant growth/development (inferred by the lower floating frond number, "root" length, and the number of "roots"), as well as lower dispersion of individuals in the experimental units. Plants exposed to PE MPs also showed lower epidermal thickness (abaxial leaf face) and a longer length of the central leaf vein and vascular bundle area. Ultrastructural analyses of S. auriculata exposed to MPs revealed rupture of some epidermal cells and trichomes on the adaxial and abaxial, leaf necrosis, and chlorosis. In the "roots", we observed dehydrated filamentous structures with evident deformations in plants exposed to the pollutants. Both on the abaxial leaf face and on the "roots", the adherence of PE MPs was observed. Furthermore, exposure to PE MPs induced lower chlorophyll content, cell membrane damage, and redox imbalance, marked by reduced catalase and superoxide dismutase activity and increased production of reactive oxygen and nitrogen species as well as malondialdehyde. However, in general, we did not observe the dose-response effect for the evaluated biomarkers. The values of the integrated biomarker response index, the principal component analysis (PCA) results and the hierarchical clustering analysis confirmed the similarity between the responses of plants exposed to different PE MPs concentrations. Therefore, our study sheds light on how PE MPs can affect S. auriculata and reinforces that putting these pollutants in freshwater environments might be hazardous from an ecotoxicological point of view.
Collapse
Affiliation(s)
- Alex Rodrigues Gomes
- Laboratory of Toxicology Applied to the Environment, Goiano Federal Institute, Urutaí, GO, Brazil; Post-Graduation Program in Agronomy, Goiano Federal Institute, Rio Verde, GO, Brazil
| | - Ítalo Nascimento Freitas
- Laboratory of Toxicology Applied to the Environment, Goiano Federal Institute, Urutaí, GO, Brazil; Post-Graduation Program in Ecology, Conservation, and Biodiversity, Federal University of Uberlândia, Uberlândia, MG, Brazil
| | - Thiarlen Marinho da Luz
- Laboratory of Toxicology Applied to the Environment, Goiano Federal Institute, Urutaí, GO, Brazil; Post-Graduation Program in Conservation of Cerrado Natural Resources, Goiano Federal Institute, Urutaí, GO, Brazil
| | | | | | - Chinnaperumal Kamaraj
- Interdisciplinary Institute of Indian System of Medicine (IIISM), Directorate of Research and Virtual Education, SRM Institute of Science and Technology (SRMIST), Kattankulathur 603203, Tamil Nadu, India
| | - Md Mostafizur Rahman
- Laboratory of Environmental Health and Ecotoxicology, Department of Environmental Sciences, Jahangirnagar University, Dhaka 1342, Bangladesh
| | | | - Andrés Hugo Arias
- Instituto Argentino de Oceanografía (IADO), Universidad Nacional del Sur (UNS)-CONICET, Florida 8000, Complejo CCT CONICET Bahía Blanca, Bahía Blanca, Argentina
| | - Fábia Barbosa da Silva
- Laboratory of Tissue Culture, Goiano Federal Institute, Rio Verde, GO, Brazil; Post-Graduation Program in Biotechnology and Biodiversity, Federal University of Goiás, Goiânia, GO, Brazil
| | - Sengodan Karthi
- Division of Biopesticides and Environmental Toxicology, Sri Paramakalyani Centre for Excellence in Environmental Sciences, Manonmaniam Sundaranar University, Alwarkurichi, Tirunelveli, Tamil Nadu 627 412, India
| | - Omar Cruz-Santiago
- Programa Multidisciplinario de Posgrado en Ciencias Ambientales (PMPCA), Agenda Ambiental, Universidad Autónoma de San Luis Potosí, Av. Manuel Nava 201, Zona Universitaria, 78210 San Luis Potosí, Mexico
| | - Fabiano Guimarães Silva
- Post-Graduation Program in Agronomy, Goiano Federal Institute, Rio Verde, GO, Brazil; Post-Graduation Program in Biotechnology and Biodiversity, Federal University of Goiás, Goiânia, GO, Brazil
| | - Guilherme Malafaia
- Laboratory of Toxicology Applied to the Environment, Goiano Federal Institute, Urutaí, GO, Brazil; Post-Graduation Program in Ecology, Conservation, and Biodiversity, Federal University of Uberlândia, Uberlândia, MG, Brazil; Post-Graduation Program in Conservation of Cerrado Natural Resources, Goiano Federal Institute, Urutaí, GO, Brazil; Programa Multidisciplinario de Posgrado en Ciencias Ambientales (PMPCA), Agenda Ambiental, Universidad Autónoma de San Luis Potosí, Av. Manuel Nava 201, Zona Universitaria, 78210 San Luis Potosí, Mexico; Post-Graduation Program in Biotechnology and Biodiversity, Federal University of Goiás, Goiânia, GO, Brazil.
| |
Collapse
|
4
|
Mohd G, Majid K, Lone S. Synergetic Role of Nano-/Microscale Structures of the Trifolium Leaf Surface for Self-Cleaning Properties. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023; 39:6178-6187. [PMID: 37071560 DOI: 10.1021/acs.langmuir.3c00317] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
Wetting has an essential pertinence to surface applications. The exemplary water-repelling and self-cleaning surfaces in nature have stimulated considerable scientific exploration, given their practical leverage in cleaning window glasses, painted surfaces, fabrics, and solar cells. Here, we explored the three-tier hierarchical surface structure of the Trifolium leaf with distinguished self-cleaning characteristics. The leaf remains fresh, withstands adverse weather, thrives throughout the year, and self-cleans itself against mud or dust. Self-cleaning features are attributed to a three-tier hierarchical synergetic design. The leaf surface is explicated by an optical microscope, a scanning electron microscope, a three-dimensional profilometer, and a water contact angle measuring device. Hierarchical base roughness (i.e., nano-/microscale) comprises a fascinating arrangement, which imparts a superhydrophobic feature to the surface. As a result, the contaminants present on the leaf surface are washed with rolling water droplets. We noticed that self-cleaning is a function of impacting or rolling droplets, and the rolling mechanism is identified as efficient. The self-cleaning phenomenon is studied for contaminations of variable sizes, shapes, and compositions. The contaminations are supplied in both dry and aqueous mixtures. Furthermore, we examined the self-cleaning effect of the Trifolium leaf surface by atmospheric water harvesting. The captured water drops fuse, roll, descend, and wash away the contaminating particles. The diversity of contaminants investigated makes this study applicable to different environmental conditions. And, along with other parallel technologies, this investigation could be useful for crafting sustainable self-cleaning surfaces for regions with acute water scarcity.
Collapse
Affiliation(s)
- Ghulam Mohd
- Department of Chemistry, National Institute of Technology (NIT), Srinagar, J&K 190006, India
- iDREAM (Interdisciplinary Division for Renewable Energy & Advanced Materials), NIT, Srinagar, J&K 190006, India
| | - Kowsar Majid
- Department of Chemistry, National Institute of Technology (NIT), Srinagar, J&K 190006, India
- iDREAM (Interdisciplinary Division for Renewable Energy & Advanced Materials), NIT, Srinagar, J&K 190006, India
| | - Saifullah Lone
- Department of Chemistry, National Institute of Technology (NIT), Srinagar, J&K 190006, India
- iDREAM (Interdisciplinary Division for Renewable Energy & Advanced Materials), NIT, Srinagar, J&K 190006, India
| |
Collapse
|
5
|
Roth-Nebelsick A, Krause M. The Plant Leaf: A Biomimetic Resource for Multifunctional and Economic Design. Biomimetics (Basel) 2023; 8:biomimetics8020145. [PMID: 37092397 PMCID: PMC10123730 DOI: 10.3390/biomimetics8020145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2023] [Revised: 03/29/2023] [Accepted: 03/30/2023] [Indexed: 04/25/2023] Open
Abstract
As organs of photosynthesis, leaves are of vital importance for plants and a source of inspiration for biomimetic developments. Leaves are composed of interconnected functional elements that evolved in concert under high selective pressure, directed toward strategies for improving productivity with limited resources. In this paper, selected basic components of the leaf are described together with biomimetic examples derived from them. The epidermis (the "skin" of leaves) protects the leaf from uncontrolled desiccation and carries functional surface structures such as wax crystals and hairs. The epidermis is pierced by micropore apparatuses, stomata, which allow for regulated gas exchange. Photosynthesis takes place in the internal leaf tissue, while the venation system supplies the leaf with water and nutrients and exports the products of photosynthesis. Identifying the selective forces as well as functional limitations of the single components requires understanding the leaf as an integrated system that was shaped by evolution to maximize carbon gain from limited resource availability. These economic aspects of leaf function manifest themselves as trade-off solutions. Biomimetics is expected to benefit from a more holistic perspective on adaptive strategies and functional contexts of leaf structures.
Collapse
Affiliation(s)
| | - Matthias Krause
- State Museum of Natural History, Rosenstein 1, 70191 Stuttgart, Germany
| |
Collapse
|
6
|
Zhou S, Jiang L, Dong Z. Overflow Control for Sustainable Development by Superwetting Surface with Biomimetic Structure. Chem Rev 2023; 123:2276-2310. [PMID: 35522923 DOI: 10.1021/acs.chemrev.1c00976] [Citation(s) in RCA: 19] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Liquid flowing around a solid edge, i.e., overflow, is a commonly observed flow behavior. Recent research into surface wetting properties and microstructure-controlled overflow behavior has attracted much attention. Achieving controllable macroscale liquid dynamics by manipulating the micro-nanoscale liquid overflow has stimulated diverse scientific interest and fostered widespread use in practical applications. In this review, we outline the evolution of overflow and present a critical survey of the mechanism of surface wetting properties and microstructure-controlled liquid overflow in multilength scales ranging from centimeter to micro and even nanoscale. We summarize the latest progress in utilizing the mechanisms to manipulate liquid overflow and achieve macroscale liquid dynamics and in emerging applications to manipulate overflow for sustainable development in various fields, along with challenges and perspectives.
Collapse
Affiliation(s)
- Shan Zhou
- CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China.,School of Future Technology, University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Lei Jiang
- CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China.,School of Future Technology, University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Zhichao Dong
- CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China.,School of Future Technology, University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| |
Collapse
|
7
|
Han X, Liu J, Wang M, Upmanyu M, Wang H. Second-Level Microgroove Convexity is Critical for Air Plastron Restoration on Immersed Hierarchical Superhydrophobic Surfaces. ACS APPLIED MATERIALS & INTERFACES 2022; 14:52524-52534. [PMID: 36373889 DOI: 10.1021/acsami.2c15929] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Air plastrons trapped on the surfaces of underwater superhydrophobic surfaces are critical for their function. Fibrillar morphologies offer a natural pathway, yet they are limited to a narrow range of liquid-surface systems and are vulnerable to pressure fluctuations that irreversibly destroy the air layer plastron. Inspired by the convexly grooved bases of water fern (Salvinia) leaves that support their fibrous outgrowths, we focus on the effect of such second-level grooved structures or microgrooves on the plastron restoration on immersed three-dimensional (3D)-printed hierarchical surfaces. Elliptical, interconnected microgrooves are fabricated with varying surface curvatures to study the effect of their morphology. Immersion experiments reveal that the convex groove curvature stabilizes a seed gas layer (SGL) that facilitates plastron restoration for all immersed hydrophobic surfaces. Theoretical calculations and atomic-scale computations reveal that the SGL storage capacity that sets the SGL robustness follows from the liquid menisci adaption to the groove geometry and pressure, from micro- to nanoscales, and it can be further tuned using separated grooves. Our study highlights groove convexity as a key morphological feature for the design of second-level architectures for underwater air plastron restoration on hierarchical superhydrophobic surfaces.
Collapse
Affiliation(s)
- Xiao Han
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei230027, Anhui, China
| | - Jingnan Liu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei230027, Anhui, China
| | - Mengyuan Wang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei230027, Anhui, China
| | - Moneesh Upmanyu
- Group for Simulation and Theory of Atomic-Scale Material Phenomena (stAMP), Department of Mechanical and Industrial Engineering, Northeastern University, Boston, Massachusetts02115, United States
| | - Hailong Wang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei230027, Anhui, China
| |
Collapse
|
8
|
Konrad W, Neinhuis C, Roth-Nebelsick A. Straight roads into nowhere - obvious and not-so-obvious biological models for ferrophobic surfaces. BEILSTEIN JOURNAL OF NANOTECHNOLOGY 2022; 13:1345-1360. [PMID: 36474925 PMCID: PMC9679617 DOI: 10.3762/bjnano.13.111] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/01/2022] [Accepted: 10/18/2022] [Indexed: 06/17/2023]
Abstract
There are currently efforts to improve strategies for biomimetic approaches, to identify pitfalls and to provide recommendations for a successful biomimetic work flow. In this contribution, a case study of a concrete biomimetic project is described that started with a posed technical problem for which seemingly obvious biological models exist. The technical problem was to devise a ferrophobic surface that prevents the contact between the copper surface of a tuyère (a water cooled aeration pipe within a blast furnace) and liquid iron. Therefore, biological external surfaces that strongly repel liquids appeared to be suitable, particularly the hair cover of the water fern Salvinia molesta and the surface of Collembola (an arthropod group). It turned out, however, that it was not feasible to realise the functional structures of both biological models for the tuyère problem. Instead, a seemingly not obvious biological model was identified, namely micropores within the cell walls of water-transporting conduits of plants that connect the conduits to a three-dimensional flow network. These specially shaped pores are assumed to be able to create stable air bodies, which support the refilling of embolised conduits. By adopting the shape of these micropores, a successful prototype for a ferrophobic copper surface repelling liquid iron could be devised. This case study illustrates that straight road maps from technical problems to obvious biological models are no guarantee for success, and that it is difficult to arrive at a formalised biomimetic working scheme. Rather, a broad understanding of biological function and its complexity is beneficial.
Collapse
Affiliation(s)
- Wilfried Konrad
- Institute of Botany, Technical University Dresden, Zellescher Weg 20b, D-01217 Dresden, Germany
- Department of Geosciences, University of Tübingen, Schnarrenbergstr. 94–96, D-72076 Tübingen, Germany
| | - Christoph Neinhuis
- Institute of Botany, Technical University Dresden, Zellescher Weg 20b, D-01217 Dresden, Germany
| | - Anita Roth-Nebelsick
- State Museum of Natural History Stuttgart, Rosenstein 1, D-70191 Stuttgart, Germany
| |
Collapse
|
9
|
Rawlinson JM, Cox HJ, Hopkins G, Cahill P, Badyal JPS. Nature-Inspired Trapped Air Cushion Surfaces for Environmentally Sustainable Antibiofouling. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130491] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
10
|
Sun P, Feng X, Tian G, Zhang X, Chu J. Ultrafast Self-Healing Superhydrophobic Surface for Underwater Drag Reduction. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:10875-10885. [PMID: 36001007 DOI: 10.1021/acs.langmuir.2c01566] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The self-healing superhydrophobic surfaces have attracted great interest owing to restoring superhydrophobicity without preparation crafts. However, the self-healing superhydrophobic surface still faces the dilemma of long repairing time. Especially in aqueous environments, superhydrophobic surfaces are highly susceptible to contamination and damage. In the current study, a superhydrophobic surface with ultrafast repairability was developed, which apply for drag reduction in aqueous medium. The prepared superhydrophobic surface can recover superhydrophobicity in only 30 s after severe physical and chemical damage. In addition, this research pioneered the combination of superhydrophobicity and porous structures for underwater drag reduction. The study of drag reduction confirms that the superhydrophobic surface can reduce the frictional drag by about 43% in the water. However, the drag reduction rate of the superhydrophobic surface with the porous structure can be improved to 76% due to increased stability of the air layer. More importantly, the porous structure with the average pore size of 50 μm has the most excellent stability through further experiments on the underwater air layer. This is attributed to the proper size of the pore to effectively balance the capillary force and resist wetting in the marginal region. This study will bring inspiration for the large-scale application of superhydrophobic surfaces and long-term drag reduction.
Collapse
Affiliation(s)
- Pengfei Sun
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Xiaoming Feng
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Guizhong Tian
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Xiaowei Zhang
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Jiahui Chu
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| |
Collapse
|
11
|
Kim M, Yoo S, Jeong HE, Kwak MK. Fabrication of Salvinia-inspired surfaces for hydrodynamic drag reduction by capillary-force-induced clustering. Nat Commun 2022; 13:5181. [PMID: 36056031 PMCID: PMC9440115 DOI: 10.1038/s41467-022-32919-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/16/2022] [Accepted: 08/23/2022] [Indexed: 11/09/2022] Open
Abstract
For decades, bioinspired functional materials have been attracting the interest of many researchers for their remarkable characteristics. In particular, some plant leaves are well known for their inherent superhydrophobic nature. Salvinia molesta, a free-floating aquatic fern, has egg-beater-shaped hierarchical trichomes on its surface of leaves. Due to the unique structure and complex wettability of the hairs, this plant has the ability to maintain a stable thick air layer upon the structure when it is submerged underwater. Often referred to as the “Salvinia Effect,” this property is expected to be suitable for use in hydrodynamic drag reduction. However, due to the complex shape of the trichome, currently applied fabrication methods are using a three-dimensional printing system, which is not applicable to mass production because of its severely limited productivity. In this work, artificial Salvinia leaf inspired by S. molesta was fabricated using a conventional soft lithography method assisted with capillary-force-induced clustering of micropillar array. The fabrication method suggested in this work proposes a promising strategy for the manufacturing of Salvinia-inspired hydrodynamic drag reduction surfaces. Salvinia molesta plant has the ability to maintain a stable air layer when submerged underwater due to its specific form. The authors propose here a soft lithography fabrication method of artificial Salvinia leaf assisted with capillary-force induced clustering of micropillar array, for hydrodynamic drag reduction.
Collapse
Affiliation(s)
- Minsu Kim
- Department of Mechanical Engineering, Kyungpook National University, Daegu, 41566, Republic of Korea
| | - Seunghoon Yoo
- Department of Mechanical Engineering, Kyungpook National University, Daegu, 41566, Republic of Korea
| | - Hoon Eui Jeong
- Department of Mechanical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, 44919, Republic of Korea
| | - Moon Kyu Kwak
- Department of Mechanical Engineering, Kyungpook National University, Daegu, 41566, Republic of Korea.
| |
Collapse
|
12
|
Zhang Y, Hu Y, Xu B, Fan J, Zhu S, Song Y, Cui Z, Wu H, Yang Y, Zhu W, Wang F, Li J, Wu D, Chu J, Jiang L. Robust Underwater Air Layer Retention and Restoration on Salvinia-Inspired Self-Grown Heterogeneous Architectures. ACS NANO 2022; 16:2730-2740. [PMID: 35156798 DOI: 10.1021/acsnano.1c09669] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Salvinia's long-term underwater air layer retention ability has inspired researchers to develop artificial microstructures. However, Salvinia has an exquisite combination of a complicated hollow structure and heterogeneous chemical properties, which makes artificial reproduction beyond the capabilities of traditional fabrication techniques. In addition, under extremely low underpressure conditions, the mechanism of retention and restoration of the underwater air layer of Salvinia remains unclear. Herein, by combining the shape memory polymer "top-constrained self-branching (TCSB)" and hydrophilic SiO2 microspheres trapping, four-branch hollow microstructures with heterogeneous chemical properties are fabricated. By applying underpressure, the crucial role of hydrophilic apexes is unveiled in air layer restoration. Through the calculation of the surface energy, the underlying mechanism is well interpreted. This study holds great promise for developing Salvinia-inspired artificial structures and reveals the underlying mechanism of the robust air retention and recovery capability of Salvinia leaves in extreme environments.
Collapse
Affiliation(s)
- Yachao Zhang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Yanlei Hu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Bing Xu
- School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
| | - Jianing Fan
- Department of Modern Mechanics, CAS Center for Excellence in Complex System Mechanics, University of Science and Technology of China, Hefei 230027, China
| | - Suwan Zhu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Yuegan Song
- Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, China
| | - Zehang Cui
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Hao Wu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Yi Yang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
- Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, China
| | - Wulin Zhu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Fengchao Wang
- Department of Modern Mechanics, CAS Center for Excellence in Complex System Mechanics, University of Science and Technology of China, Hefei 230027, China
| | - Jiawen Li
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Dong Wu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Jiaru Chu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China
| | - Lei Jiang
- Key Laboratory of Bio-inspired Materials and Interface Sciences, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China
| |
Collapse
|
13
|
Zhang Y, Feng X, Tian G, Jia C. Rheological Properties and Drag Reduction Performance of Puffer Epidermal Mucus. ACS Biomater Sci Eng 2022; 8:460-469. [PMID: 35077127 DOI: 10.1021/acsbiomaterials.1c01049] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Most species of fish are covered with mucus, which provides the effect of reduction in swimming drag. In this paper, three concentrations of puffer epidermal mucus were obtained from the epidermal mucosa of puffer. The rheological properties and the drag reduction performance of the puffer epidermal mucus were characterized via a rheometer experimental and numerical simulation method. The relationship between the rheological properties and the drag reduction performance was analyzed and discussed, and the drag reduction mechanism of the puffer epidermal mucus was further explored. The results showed that the best drag reduction rate was 6.2% when the inflow velocity and concentration of puffer epidermal mucus were 0.1 m/s and 18.2 g/L, respectively. The rheological properties of puffer epidermal mucus are viscoelastic, and the mucus forms a sliding surface, which reduces the frictional drag of the fluid. In conclusion, this paper may provide a reference for the development of drag-reducing agents and drag-reducing research studies on other fish mucus.
Collapse
Affiliation(s)
- Yaosheng Zhang
- College of Mechanical Engineering, Jiangsu Provincial Key Laboratory of Advanced Manufacturing for Marine Mechanical Equipment, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Xiaoming Feng
- College of Mechanical Engineering, Jiangsu Provincial Key Laboratory of Advanced Manufacturing for Marine Mechanical Equipment, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Guizhong Tian
- College of Mechanical Engineering, Jiangsu Provincial Key Laboratory of Advanced Manufacturing for Marine Mechanical Equipment, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Changfeng Jia
- Department of Technology, Three Gorges New Energy Offshore Wind Power Operation and Maintenance Jiangsu Limited Liability Company, Yancheng 224400, China
| |
Collapse
|
14
|
Konrad W, Roth-Nebelsick A, Kessel B, Miranda T, Ebner M, Schott R, Nebelsick JH. The impact of raindrops on Salvinia molesta leaves: effects of trichomes and elasticity. J R Soc Interface 2021; 18:20210676. [PMID: 34905964 DOI: 10.1098/rsif.2021.0676] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
The floating leaves of the aquatic fern Salvinia molesta are covered by superhydrophobic hairs (=trichomes) which are shaped like egg-beaters. These trichomes cause high water repellency and stable unwettability if the leaf is immersed. Whereas S. molesta hairs are technically interesting, there remains also the question concerning their biological relevance. S. molesta has its origin in Brazil within a region exposed to intense rainfall which easily penetrates the trichome cover. In this study, drop impact on leaves of S. molesta were analysed using a high-speed camera. The largest portion of the kinetic energy of a rain drop is absorbed by elastic responses of the trichomes and the leaf. Although rain water is mostly repelled, it turned out that the trichomes hamper swift shedding of rain water and some residual water can remain below the 'egg-beaters'. Drops rolling over the trichomes can, however, 'suck up' water trapped beneath the egg-beaters because the energetic state of a drop on top of the trichomes is-on account of the superhydrophobicity of the hairs-much more favourable. The trichomes may therefore be beneficial during intense rainfall, because they absorb some kinetic energy and keep the leaf base mostly free from water.
Collapse
Affiliation(s)
- Wilfried Konrad
- Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, Tübingen 72076, Germany.,Institute of Botany, Technical University of Dresden, Zellescher Weg 20b, Dresden 01217, Germany
| | - Anita Roth-Nebelsick
- State Museum of Natural History Stuttgart, Rosenstein 1, Stuttgart 70191, Germany
| | - Benjamin Kessel
- Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, Tübingen 72076, Germany
| | - Tatiana Miranda
- Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, Tübingen 72076, Germany
| | - Martin Ebner
- Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, Tübingen 72076, Germany
| | - Rena Schott
- State Museum of Natural History Stuttgart, Rosenstein 1, Stuttgart 70191, Germany
| | - James H Nebelsick
- Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, Tübingen 72076, Germany
| |
Collapse
|
15
|
Han X, Wang M, Yan R, Wang H. Cassie State Stability and Gas Restoration Capability of Superhydrophobic Surfaces with Truncated Cone-Shaped Pillars. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:12897-12906. [PMID: 34714661 DOI: 10.1021/acs.langmuir.1c01909] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The gas layer stability on superhydrophobic surfaces and gas restoration on the immersed superhydrophobic surfaces have been great challenges for their practical applications in recent years. Inspired by the naturally existing mushroom-like super-repellent superhydrophobic patterns, we choose superhydrophobic surfaces with truncated cone-shaped pillars as our research objects to tackle such challenges by tuning their geometrical parameters. We perform molecular dynamics simulations to investigate the Cassie-Wenzel transition under external pressure and the Wenzel-Cassie transition due to underwater spreading of compressed bubbles. Theories based on the Young-Laplace equation and total free-energy variation are developed to explore the influence of geometrical parameters of pillars on the pressure resistance and underwater gas restoration, which is in good agreement with simulation results. These simulation results and theoretical analysis suggest that cork-shaped pillars, analogous to the surface structures of natural organisms like springtails and Salvinia leaves, can be super-repellent to the liquid and favorable for the gas spreading process. Our study provides theoretical guidance for the design of superhydrophobic surfaces with both Cassie state stability and gas restoration capability.
Collapse
Affiliation(s)
- Xiao Han
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230027, China
| | - Mengyuan Wang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230027, China
| | - Ruilin Yan
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230027, China
| | - Hailong Wang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230027, China
| |
Collapse
|
16
|
Wang Y, Meng J, Wang S. Recent Progress of Bioinspired Scalephobic Surfaces with Specific Barrier Layers. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:8639-8657. [PMID: 34266239 DOI: 10.1021/acs.langmuir.1c01282] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Bioinspired superwettable surfaces have been widely harnessed in diverse applications such as self-cleaning, oil/water separation, and liquid transport. So far, only a little work is focused on scalephobic capability of those superwettable surfaces. However, the troublesome scale deposition will inevitably be observed in our daily production and life, greatly reducing heat transfer efficiency and inhibiting the liquid transport. To address this annoying problem, as the emerging strategy, specific barrier layers are introduced onto superwettable surfaces to reduce or even avoid the direct contact between scale and the surfaces. In this feature article, we first provide the basic concept of bioinspired scalephobic surfaces with specific barrier layers. Then, we briefly introduce the typical fabrication methods of scalephobic surfaces. Later, we summarize recent progress of bioinspired scalephobic surfaces with specific barrier layers. Furthermore, we point out the guiding theory and criteria for the stability of barrier layers. Finally, we put forward the forecast on the existing problems and future direction in bioinspired scalephobic surfaces.
Collapse
Affiliation(s)
- Yixuan Wang
- CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, CAS Center for Excellence in Nanoscience, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Jingxin Meng
- CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, CAS Center for Excellence in Nanoscience, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China
| | - Shutao Wang
- CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, CAS Center for Excellence in Nanoscience, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| |
Collapse
|