Surface Design Strategy of Catalysts for Water Electrolysis

One-step electrodeposition synthesis of NiFePS on carbon cloth as self-supported electrodes for electrochemical overall water splitting

Electrocatalytic water splitting (EWS) for hydrogen production is considered an ideal strategy for utilizing renewable energy, reducing fossil fuel consumption, and addressing environmental pollution issues. Traditional noble metal electrocatalysts have excellent performance, but their cost is high. Developing efficient, stable, and relatively inexpensive dual functional electrocatalysts is crucial for promoting large-scale EWS hydrogen production processes. Herein, a simple one-step electrodeposition method was used to grow nickel-iron phosphorus-sulfides (NiFePS) on the surface of hydrophilic treated carbon cloth (CC). The resultant NiFePS/CC with a phosphorus to sulfur ratio of 1:4 exhibited the best electrocatalytic performance, requiring only -91 mV and 216 mV overpotentials to generate the current densities of 10 mA·cm-2 in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. When it was used as a bifunctional electrocatalyst to overall water splitting (OWS), a voltage of 1.536 V can generate a current density of 10 mA·cm-2. The excellent electrocatalytic performance can be ascribed to two factors: 1) the CC with excellent conductivity serves as a growth substrate, reducing the impedance of charge transfer from the electrode to the electrolyte and accelerating the electron transfer rate; 2) The large number of ultra-thin nanosheets formed on the surface of the catalyst increase the electrochemical specific surface area, expose more reaction sites, and thus improve the electrocatalytic reaction performance. This work provides a new approach for designing efficient non-noble metal electrocatalysts for water splitting.

Phosphorus-doped nickel cobalt oxide (NiCo2O4) wrapped in 3D hierarchical hollow N-doped carbon nanoflowers as highly efficient bifunctional electrocatalysts for overall water splitting

Properly design and fabricate capable electrocatalysts with 3D hierarchical hollow framework to realize cost-effective and efficacious overall water splitting (OWS) are particularly meaningful for the large-scale arrangement of pivotal energy technology. In this study, P-doped NiCo2O4 nanoparticles encapsulated in N-doped carbon hierarchical hollow nanoflowers (P-NiCo2O4@NCHHNFs) were constructed using the hydrothermal-pyrolysis-phosphorization approach. This fascinating architecture can not merely serve as a conductive pathway for electron transfer, but at the same time effectively inhibited the aggregation and corrosion of the NiCo2O4 nanoparticles. Additionally, the P doping not only regulates electronic structure configuration to boost the intrinsic activity of the catalyst, but also enhance electrochemical surface areas to reveal more accessible active sites. Attributing to these characteristics, the as-prepared P-NiCo2O4@NCHHNFs exhibit preeminent electrocatalytic performance with low overpotentials of 283 mV and 162 mV for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) (at 10 mA cm-2), respectively. Specifically, by using the P-NiCo2O4@NCHHNFs as bifunctional catalysts, a low potential of 1.56 V (at 10 mA cm-2) is sufficient to drive overall water splitting with splendid durability. This study proposed an innovative strategy for the conceiving and fabricating high-performance catalysts via heteroatom-doping.

Tailoring atomically local electric field of NiFe layered double hydroxides with Ag dopants to boost oxygen evolution kinetics

The demand for clean energy sources has driven focus towards advanced electrochemical systems. However, the sluggish kinetics of the oxygen evolution reaction (OER) constrain the energy conversion efficiency of relevant devices. Herein, a one-step method is reported to grow oxygen vacancies (Vo) rich NiFeAg layered double hydroxides nanoclusters on carbon cloth (Vo-NiFeAg-LDH/CC) for serving as the self-supporting electrode to catalyze OER. The OER performance of Vo-NiFeAg-LDH/CC has been remarkably enhanced through Ag and Vo co-modification compared with pristine NiFe-LDH, achieving a low Tafel slope of 49.7 mV dec-1 in 1 m KOH solution. Additionally, the current density of Vo-NiFeAg-LDH/CC is 3.23 times higher than that of the state-of-art IrO2 at 2 V under an alkaline flow electrolyzer setup. Theoretical calculations and experimental results collectively demonstrate that Ag dopant and Vo strengthen the O* adsorption with active sites, further promoting the deprotonation step from OH* to O* and accelerating the catalytic reaction. In a word, this work clarifies the structural correlation and synergistic mechanism of Ag dopant and Vo, providing valuable insights for the rational design of catalyst for renewable energy applications.

Arming Amorphous NiMoO4 on Nickel Phosphide Enables Highly Stable Alkaline Seawater Oxidation

Seawater electrolysis holds tremendous promise for the generation of green hydrogen (H2). However, the system of seawater-to-H2 faces significant hurdles, primarily due to the corrosive effects of chlorine compounds, which can cause severe anodic deterioration. Here, a nickel phosphide nanosheet array with amorphous NiMoO4 layer on Ni foam (Ni2P@NiMoO4/NF) is reported as a highly efficient and stable electrocatalyst for oxygen evolution reaction (OER) in alkaline seawater. Such Ni2P@NiMoO4/NF requires overpotentials of just 343 and 370 mV to achieve industrial-level current densities of 500 and 1000 mA cm-2, respectively, surpassing that of Ni2P/NF (470 and 555 mV). Furthermore, it maintains consistent electrolysis for over 500 h, a significant improvement compared to that of Ni2P/NF (120 h) and Ni(OH)2/NF (65 h). Electrochemical in situ Raman spectroscopy, stability testing, and chloride extraction analysis reveal that is situ formed MoO4 2-/PO4 3- from Ni2P@NiMoO4 during the OER test to the electrode surface, thus effectively repelling Cl- and hindering the formation of harmful ClO-.

Unveiling the potential of amorphous nanocatalysts in membrane-based hydrogen production

Hydrogen, as a clean and renewable energy source, is a promising candidate to replace fossil fuels and alleviate the environmental crisis. Compared with the traditional H-type cells with a finite-gap, the design of membrane electrodes can reduce the gas transmission resistance, enhance the current density, and improve the efficiency of hydrogen production. However, the harsh environment in the electrolyser makes the membrane electrode based water electrolysis technology still limited by the lack of catalyst activity and stability under the working conditions. Due to the abundant active sites and structural flexibility, amorphous nanocatalysts are alternatives. In this paper, we review the recent research progress of amorphous nanomaterials as electrocatalysts for hydrogen production by electrolysis at membrane electrodes, illustrate and discuss their structural advantages in membrane electrode catalytic systems, as well as explore the significance of the amorphous structure for the development of membrane electrode systems. Finally, the article also looks at future opportunities and adaptations of amorphous catalysts for hydrogen production at membrane electrodes. The authors hope that this review will deepen the understanding of the potential of amorphous nanomaterials for application in electrochemical hydrogen production, facilitating future nanomaterials research and new sustainable pathways for hydrogen production.

Unraveling the Role of the Stoichiometry of Atomic Layer Deposited Nickel Cobalt Oxides on the Oxygen Evolution Reaction

Nickel cobalt oxides (NCOs) are promising, non-precious oxygen evolution reaction (OER) electrocatalysts. However, the stoichiometry-dependent electrochemical behavior makes it crucial to understand the structure-OER relationship. In this work, NCO thin film model systems are prepared using atomic layer deposition. In-depth film characterization shows the phase transition from Ni-rich rock-salt films to Co-rich spinel films. Electrochemical analysis in 1 m KOH reveals a synergistic effect between Co and Ni with optimal performance for the 30 at.% Co film after 500 CV cycles. Electrochemical activation correlates with film composition, specifically increasing activation is observed for more Ni-rich films as its bulk transitions to the active (oxy)hydroxide phase. In parallel to this transition, the electrochemical surface area (ECSA) increases up to a factor 8. Using an original approach, the changes in ECSA are decoupled from intrinsic OER activity, leading to the conclusion that 70 at.% Co spinel phase NCO films are intrinsically the most active. The studies point to a chemical composition dependent OER mechanism: Co-rich spinel films show instantly high activities, while the more sustainable Ni-rich rock-salt films require extended activation to increase the ECSA and OER performance. The results highlight the added value of working with model systems to disclose structure-performance mechanisms.

Regulating the electronic structure of Pt SAs-Ni2P for enhanced hydrogen evolution reaction

The single atom catalysts (SACs) show immense promise as catalytic materials. By doping the single atoms (SAs) of precious metals onto substrates, the atomic utilization of these metals can be maximized, thereby reducing catalyst costs. The electronic structure of precious metal SAs is significantly influenced by compositions of doped substrates. Therefore, optimizing the electronic structure through appropriate doping of substrates can further enhance catalytic activity. Here, Pt single atoms (Pt SAs) are doped onto transition metal sulfide substrate NiS2 (Pt SAs-NiS2) and phosphide substrate Ni2P (Pt SAs-Ni2P) to design and prepare catalysts. Compared to the Pt SAs-NiS2 catalyst, the Pt SAs-Ni2P catalyst exhibits better hydrogen evolution catalytic performance and stability. Under 1 M KOH conditions, the hydrogen evolution mass activity current density of the Pt SAs-Ni2P catalyst reaches 0.225 A mgPt-1 at 50 mV, which is 33 times higher than that of commercial Pt/C catalysts. It requires only 44.9 mV to achieve a current density of 10 mA cm-2. In contrast, for the Pt SAs-NiS2 catalyst, the hydrogen evolution mass activity current density is 0.178 A mgPt-1, requiring 77.8 mV to achieve a current density of 10 mA cm-2. Theoretical calculations indicate that in Pt SAs-Ni2P, the interaction between Pt SAs and the Ni2P substrate causes the Pt d-band center to shift downward, enhancing the H2O desorption and providing optimal H binding sites. Additionally, the hollow octahedral morphology of Ni2P provides a larger surface area, exposing more reactive sites and improving reaction kinetics. This study presents an effective pathway for preparing high-performance hydrogen evolution electrocatalysts by selecting appropriate doped substrates to control the electronic structure of Pt SAs.

Ultra-Thin RuIr Alloy as Durable Electrocatalyst for Seawater Hydrogen Evolution Reaction

The development of efficient, high-performance catalysts for hydrogen evolution reaction (HER) remains a significant challenge, especially in seawater media. Here, RuIr alloy catalysts are prepared by the polyol reduction method. Compared with single-metal catalysts, the RuIr alloy catalysts exhibited higher activity and stability in seawater electrolysis due to their greater number of reactive sites and solubility resistance. The RuIr alloy has an overpotential of 75 mV@10 mA cm-2, which is similar to that of Pt/C (73 mV), and can operate stably for 100 hours in alkaline seawater. Density functional theory (DFT) calculations indicate that hydrogen atoms adsorbed at the top sites of Ru and Ir atoms are more favorable for HER and are most likely to be the reactive sites. This work provides a reference for developing highly efficient and stable catalysts for seawater electrolysis.

Metal-organic framework derived heterostructured phosphide bifunctional electrocatalyst for efficient overall water splitting

Developing high active and stable cost-effective bifunctional electrocatalysts for overall water splitting to produce hydrogen is of vital significance in clean and sustainable energy development. This work has prepared a novel porous unreported MOF (Ni-DPT) as a precursor to successfully synthesize a non-noble bifunctional NiCoP/Ni12P5@NF electrocatalyst through doping strategy and interface engineering. This catalyst is constructed by layered self-supporting arrays with heterojunction interface and rich nitrogen-phosphorus doping. Structural characterizations and the density function theory (DFT) calculations confirm that the interface effect of NiCoP/Ni12P5 heterojunction can regulate the electronic structure of the catalyst to optimize the Gibbs free energy of hydrogen (ΔGH*); simultaneously, the defect-rich layered nanoarrays can expose more active sites, shorten mass transfer distance, and generate a self-supporting structure for in-situ reinforcing the structural stability. As a result, this NiCoP/Ni12P5@NF catalyst exhibits favorable electrocatalytic performance, which simply needs overpotentials of 100 mV for HER and 310 mV for OER, respectively, at a current density of 10 mA·cm-2. The anion exchange membrane electrolyzer assembled with this NiCoP/Ni12P5@NF as both anode and cathode catalysts can operate stably for 200 h at a current density of 100 mA·cm-2 with an insignificant voltage decrease. This work may provide some inspiration for the further rational design of inexpensive non-noble multifunctional electrocatalysts and electrode materials for water splitting to generate hydrogen.

Novel Nucleic Acid-Assisted Ion-Responsive ECL Biosensor Based on Hollow AuAg Nanoboxes with Excellent SPR and Effective Coreaction Acceleration

Novel hollow AuAg nanoboxes (AuAg NBs) were designed for an innovative electrochemiluminescence (ECL) sensor to ultrasensitively detect Pb2+ and Hg2+ with the aid of DNAzyme and "thymine-Hg2+-thymine" ("T-Hg2+-T") structure. AuAg NBs are employed as an excellent surface plasma resonance (SPR) source, as well as an effective coreaction accelerator for the CoNi NFs/S2O82- system to greatly improve ECL performance. To detect Pb2+, the DNAzyme catalyzes the cleavage of ribonucleic acid targets into numerous small nucleic acid fragments, leading to an ECL signal. When Hg2+ is added, the thymine-thymine (T-T) mismatches of the Hg2+ aptamer bind Hg2+ to form the "T-Hg2+-T" structure, which not only inhibits the SPR process but also produces a large steric hindrance, thus quenching the ECL signal and allowing quantification of Hg2+. The novel ECL sensor quantifies Pb2+ in the range of 0.1 fM to 0.1 μM with a limit of detection of 0.07 fM and Hg2+ in the range of 10 pM to 1 μM with a LOD of 4.07 pM.

Dandelion-like VSe2-embellished CuSe-Co3Se4 hollow nanotube clusters as bifunctional catalysts for high-performance alkaline hydrogen evolution and solar cells

Among the various non-precious metal catalysts that drive hydrogen evolution reactions (HERs) and dye-sensitized solar cells (DSSCs), transition metal selenides (TMSs) stand out due to their unique electronic properties and tunable morphology. Herein, the multicomponent selenide CuSe-Co3Se4@VSe2 was successfully synthesized by doping with metal element vanadium and selenization on the copper-cobalt carbonate hydroxide (CuCo-CH) template. CuSe-Co3Se4@VSe2 exhibited the dandelion-like cluster structure composed of hollow nanotubes doped with VSe2 nanoparticles. Due to the unique structure and the synergistic effect of various elements, CuSe-Co3Se4@VSe2 showed excellent alkaline HER and DSSC performances. The DSSC based on CuSe-Co3Se4@VSe2 exhibited an impressive power conversion efficiency (PCE) of 9.64 %, which was much higher than that of Pt (8.39 %). Besides, it possessed a low HER overpotential of 76 mV@10 mA cm-2 and a small Tafel slope of 88.9 mV dec-1 in 1.0 M KOH.

Next-Generation Green Hydrogen: Progress and Perspective from Electricity, Catalyst to Electrolyte in Electrocatalytic Water Splitting

Green hydrogen from electrolysis of water has attracted widespread attention as a renewable power source. Among several hydrogen production methods, it has become the most promising technology. However, there is no large-scale renewable hydrogen production system currently that can compete with conventional fossil fuel hydrogen production. Renewable energy electrocatalytic water splitting is an ideal production technology with environmental cleanliness protection and good hydrogen purity, which meet the requirements of future development. This review summarizes and introduces the current status of hydrogen production by water splitting from three aspects: electricity, catalyst and electrolyte. In particular, the present situation and the latest progress of the key sources of power, catalytic materials and electrolyzers for electrocatalytic water splitting are introduced. Finally, the problems of hydrogen generation from electrolytic water splitting and directions of next-generation green hydrogen in the future are discussed and outlooked. It is expected that this review will have an important impact on the field of hydrogen production from water.

A review on defect modulated electrocatalysts for the oxygen evolution reaction

The oxygen evolution reaction (OER) is crucial for applications such as water splitting and rechargeable metal-air batteries. Recent research has focused on improving the activity and stability of OER electrocatalysts through various strategies including structural innovation, heteroatom doping, and conductivity enhancement. Among these, defect engineering has proved particularly effective, allowing precise modulation of the materials' electronic structure at the atomic level. This review addresses defect-rich materials that exhibit superior electrochemical properties for OER applications, with a particular focus on developments from the past five years. The discussion starts with an overview of the OER catalytic mechanism and then delves into the types of defects, synthesis methods, and their impact on electrochemical performance. This review concludes with insights into the rational design and synthesis of advanced electrocatalysts, aiming to improve efficiency and extend operational longevity. The objective is to highlight approaches for creating high-performance OER electrocatalysts that outperform noble-metal based systems in both activity and stability.

Polyoxometalate-derived electrocatalysts enabling progress in hydrogen evolution reactions

Platinum-based catalysts exhibit outstanding electrocatalytic performance in the hydrogen evolution reaction (HER). However, platinum-based catalysts face significant challenges due to their rarity and high cost. This paper endeavors to shed light on a promising alternative: polyoxometalate (POM)-based catalysts, which possess significant potential for the synthesis of non-noble metal-based catalysts for the HER. Utilizing POMs as raw materials to assemble POM-derived materials, including POM-derived crystalline materials, metal sulfides, phosphides, carbides, nitrides, and so on, has emerged as an effective approach for the synthesis of hydrogen evolution electrocatalysts. This approach offers advantages in both stability and electrocatalytic performance. This comprehensive review navigates through latest progress in the assembly strategy and HER performance of POM-based crystal materials, alongside discussion on transition metal compounds derived from POMs, such as carbides, phosphides, and sulfides. Besides, future developments in POM-derived electrocatalyst regulation of the electrochemical HER are prospected.

Robust High-performance Bifunctional Porous Cobalt MOF-Based Catalysts for Overall Water Splitting

MOF-based materials, as bifunctional catalysts for electrocatalytic water splitting, play an important role in the application and development of clean fuel hydrogen energy. This study presents a series of novel 3D Co-based MOFs with layered networks, including [Co(4,4'-bipy)0.5(aip)(CH3OH)·H2O]n (Co-MOF 1), [Co2(1,3'-bit)(aip)2(CH3OH)·H2O]n (Co-MOF 2), [Co(4,4'-bipb)(aip)]n (Co-MOF 3), and [Co2(4,4'-bipe)(aip)2·1.5H2O]n (Co-MOF 4). Their single-crystal structures of Co-MOFs 1-4 are characterized and analyzed before being applied in alkaline solutions for water decomposition (OER and HER). The electrocatalytic tests indicate that Co-MOFs 1-4 exhibit a good performance. Notably, Co-MOF 4 exhibits great behavior which has low overpotentials of 94 and 188 mV (OER) as well as 185 and 352 mV (HER) at the currents of 10 and 100 mA cm-2, respectively. In comparison with Co-MOFs 1-3, Co-MOF 4 has the lowest Tafel slopes, highest ECSA, and smallest resistance. The immanent qualities, such as distinct interwoven long chain layered structure, unsaturated coordination modes, and synergistic catalytic qualities among Co ions, contribute to explaining the results. The fundamentals provide valuable information for the investigation of innovative MOF-based bifunctional electrocatalysts for overall water splitting.

Unlocking Potential of Pyrochlore in Energy Systems via Soft Voting Ensemble Learning

In traditional machine learning (ML)-based material design, the defects of low prediction accuracy, overfitting and low generalization ability are mainly caused by the training of a single ML model. Here, a Soft Voting Ensemble Learning (SVEL) approach is proposed to solve the above issues by integrating multiple ML models in the same scene, thus pursuing more stable and reliable prediction. As a case study, SVEL is applied to develop the broad chemical space of novel pyrochlore electrocatalysts with the molecular formula of A2B2O7, to explore promising pyrochlore oxides and accelerate predictions of unknown pyrochlore in the periodic table. The model successfully established the structure-property relationship of pyrochlore, and selected six cost-effective pyrochlore from the periodic table with a high prediction accuracy of 91.7%, all of which showed good electrocatalytic performance. SVEL not only effectively avoids the high costs of experimentation and lengthy computations, but also addresses biases arising from data scarcity in single models. Furthermore, it has significantly reduced the research cycle of pyrochlore by ≈ 22 years, offering broad prospects for accelerating the development of materials genomics. SVEL method is intended to integrate multiple AI models to provide broader model training clues for the AI material design community.

Vanadium-Doped Heterogeneous Bimetallic Phosphides Derived from Layered Double Hydroxides for Saline Water Splitting

The development of energy- and time-saving synthetic methods to prepare bifunctional and high stability catalysts are vital for overall water splitting. Here, V-doped nickel-iron hydroxide precursor by etching NiFe foam (NFF) at room temperature with dual chloride solution ("NaCl-VCl3"), is obtained then phosphating to obtain V-Ni2P-FeP/NFF as efficient bifunctional (oxygen/hydrogen exchange reaction, OER/HER) electrocatalysts, denoted as NFF(V, Na)-P. The NFF(V, Na)-P requires only 185 and 117 mV overpotentials to reach 10 mA cm-2 for OER and HER. When used as a catalyst for water splitting in a full cell, it can be stably sustained for more than 1000 h in alkaline brine electrolysis at both current densities of 100 and 500 mA cm-2. In situ Raman analyses and density functional theory (DFT) show that the V-doping-induced surface remodeling generates hydroxyl oxides as the true catalytic active centers, which not only enhances the reaction kinetics, but also reduces the free energy change in the rate-determining step. This work provides a cost-effective substrate self-derivation method to convert commercial NFF into a powerful catalyst for electrolytic brine, offering a unique route to the development of efficient electrocatalysts for saline water splitting.

A Comprehensive Pyrolysis Mechanism of Binuclear Chromium-Based Complexes for Superior OER Activity

Transition metal oxides are widely pursued as potent electrocatalysts for the oxygen evolution reaction (OER). However, single-metal chromium catalysts remain underexplored due to their intrinsic activity limitations. Herein, we successfully synthesize mixed-valence, nitrogen-doped Cr2O3/CrO3/CrN@NC nanoelectrocatalysts via one-step targeted pyrolysis techniques from a binuclear Cr-based complex (Cr2(Salophen)2(CH3OH)2), which is strategically designed as a precursor. Comprehensive pyrolysis mechanisms were thoroughly delineated by using coupled thermogravimetric analysis and mass spectrometry (TG-MS) alongside X-ray diffraction. Below 800 °C, the generation of a reducing atmosphere was noted, while continuous pyrolysis at temperatures exceeding 800 °C promoted highly oxidized CrO3 species with an elevated +6 oxidation state. The optimized catalyst pyrolyzed at 1000 °C (Cr2O3/CrO3/CrN@NCs-1000) demonstrated remarkable OER activity with a low overpotential of 290 mV in 1 M KOH and excellent stability. Further density functional theory (DFT) calculations revealed a much smaller reaction energy barrier of CrO3 than the low oxidation state species for OER reactivity. This work reveals fresh strategies for rationally engineering chromium-based electrocatalysts and overcoming intrinsic roadblocks to enable efficient OER catalysis through a deliberate oxidation state and compositional tuning.

Accurately Modulating Binuclear Metal Nodes of Metal-Organic Frameworks for Oxygen Evolution

The accurate manipulation of the species and locations of catalytic centers is crucial for regulating the catalytic activity of catalysts, which is essential for their efficient design and development. Metal-organic frameworks (MOFs) with coordinated metal sites are ideal materials for investigating the origin of catalytic activity. In this study, we present a Ni2-MOF featuring novel Ni-based binuclear nodes with open metal sites (OMSs) and saturated metal sites (SMSs). The nickel was replaced by iron to obtain Ni1Fe1-MOF. In the electrocatalytic oxygen evolution reaction, Ni1Fe1-MOF exhibited an overpotential and Tafel slope of 370 mV@10 mA cm-2 and 87.06 mV dec-1, respectively, which were higher than those of Ni2-MOF (283 mV@10 mA cm-2 and 39.59 mV dec-1, respectively), demonstrating the superior performance of Ni1Fe1-MOF. Furthermore, theoretical calculations revealed that iron as an SMS may effectively regulate the electronic structure of the nickel catalytic center to reduce the free energy barrier ΔG*OH of the rate-determining step.

Iron, Tungsten Dual-Doped Nickel Sulfide as Efficient Bifunctional Catalyst for Overall Water Splitting

Developing low-cost and highly efficient bifunctional catalysts for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) is a challenging problem in electrochemical overall water splitting. Here, iron, tungsten dual-doped nickel sulfide catalyst (Fe/W-Ni3S2) is synthesized on the nickel foam, and it exhibits excellent OER and HER performance. As a result, the water electrolyze based on Fe/W-Ni3S2 bifunctional catalyst illustrates 10 mA cm-2 at 1.69 V (without iR-compensation) and highly durable overall water splitting over 100 h tested under 500 mA cm-2. Experimental results and DFT calculations indicate that the synergistic interaction between Fe doping and Ni vacancy induced by W leaching during the in situ oxidation process can maximize exposed OER active sites on the reconstructed NiOOH species for accelerating OER kinetics, while the Fe/W dual-doping optimizes the electronic structure of Fe/W-Ni3S2 and the binding strength of intermediates for boosting HER. This study unlocks the different promoting mechanisms of incorporating Fe and W for boosting the OER and HER activity of Ni3S2 for water splitting, which provides significant guidance for designing high-performance bifunctional catalysts for overall water splitting.

Design of Superior Electrocatalysts for Proton-Exchange Membrane-Water Electrolyzers: Importance of Catalyst Stability and Evolution

By virtue of the high energy conversion efficiency and compact facility, proton exchange membrane water electrolysis (PEMWE) is a promising green hydrogen production technology ready for commercial applications. However, catalyst stability is a challenging but often-ignored topic for the electrocatalyst design, which retards the device applications of many newly-developed electrocatalysts. By defining catalyst stability as the function of activity versus time, we ascribe the stability issue to the evolution of catalysts or catalyst layers during the water electrolysis. We trace the instability sources of electrocatalysts as the function versus time for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acid and classify them into internal and external sources. Accordingly, we summarize the latest studies for stability improvements into five strategies, i. e., thermodynamic stable active site construction, precatalyst design, support regulation, superwetting electrode fabrication, and catalyst-ionomer interface engineering. With the help of ex-situ/ in-situ characterizations and theoretical calculations, an in-depth understanding of the instability sources benefits the rational development of highly active and stable HER/OER electrocatalysts for PEMWE applications.

Phosphide-Based Electrocatalysts for Urea Electrolysis: Recent Trends and Progress

Electrolysis is a trend in producing hydrogen as a fuel for renewable energy development, and urea electrolysis is considered as one of the advanced electrolysis processes, where efficient materials still need to be explored. Notably, urea electrolysis came into existence to counter-part the electrode reactions in water electrolysis, which has hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Among those reactions, OER is sluggish and limits water splitting. Hence, urea electrolysis emerged with urea oxidation reaction (UOR) and HER as their reactions to tackle the water electrolysis. Among the explored materials, noble-metal catalysts are efficient, but their cost and scarcity limit the scaling-up of the Urea electrolysis. Hence, current challenges must be addressed, and novel efficient electrocatalysts are to be implemented to commercialize urea electrolysis technology. Phosphides, as an efficient UOR electrocatalyst, have gained huge attention due to their exceptional lattice structure geometry. The phosphide group benefits the water molecule adsorption and water dissociation, and facilitates the oxyhydrate of the metal site. This review summarizes recent trends in phosphide-based electrocatalysts for urea electrolysis, discusses synthesis strategies and crystal structure relationship with catalytic activity, and presents the challenges of phosphide electrocatalysts in urea electrolysis.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Application of Amorphous-Crystalline Coupling Materials in Electrocatalysis

Interface engineering has proven to be a highly efficient strategy for modulating the physicochemical properties of electrocatalysts and further enhancing their electrochemical performance in related energy applications. In this context, the newly proposed crystalline-amorphous (c-a) heterostructures with unusual atomic arrangements at interfaces show strong competitiveness. Nonetheless, few efforts have been made to reveal and summarize the structure-activity relationship at the two-phase interface and the corresponding electrocatalytic mechanism. This concept is devoted to comprehensively discussing the fundamental characteristics of crystalline-amorphous electrocatalysts and their application in the field of energy conversion with typical examples. In addition, the development prospects and opportunities of crystalline-amorphous heterostructure are summarized to provide potential development directions for other types of clean energy development.

Structural Engineering of Co-Metal-Organic Frameworks via Ce Incorporation for Improved Oxygen Evolution

The rational design of metal-organic framework (MOF)-based electrocatalysts plays a key role in achieving high-efficiency oxygen evolution reaction (OER). Herein, a synergetic morphology and electronic structure engineering strategy are proposed to design a Co-MOF nanoflower grown on carbon paper via rare-earth cerium doping (CoCe-MOF/CP). Compared with Co-MOF/CP, the developed CoCe-MOF/CP exhibited superior OER performance with a low overpotential of 267 mV at 10 mA cm-2 and outstanding long-term stability over 100 h. Theoretical calculations show that the unique 4f valence electron structure of Ce induced charge redistribution of the Co-MOF surface through the strong Co 3d-O 2p-Ce 4f orbital electronic coupling below the Fermi level. Ce-doped plays a key role in the engineering of the electronic states of the Co sites to endow them with the optimal free energy landscape for enhanced OER catalytic activity. This work provides new insights into comprehending the RE-enhanced mechanism of electrocatalysis and provides an effective strategy for the design of MOF-based electrocatalysts.

Sodium chloride modulated construction of hollow Co/Co3O4 heterostructure with enhanced mesoscale diffusion towards overall water splitting

Fabricating an efficient electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) isthe most challenging task for overall water splitting. Herein, we utilized the confinement effect of molten sodium chloride (NaCl) to controllably prepare hollow Co/Co3O4 nanoparticles embedded into nitrogen-doped carbon (H-Co/Co3O4-NC). Experimental and theoretical investigations revealed that the interfacial interaction within Co/Co3O4 heterostructure played a pivotal role in modulating the electronic structure and facilitating the electron transfer. Meanwhile, the superiority of hollow nanostructure could promote the mesoscale mass diffusion. Remarkably, the as-prepared H-Co/Co3O4-NC catalyst achieved the low overpotentials of 316 mV and 252 mV towards OER and HER, respectively, which delivered overall water splitting with the potential of 1.76 V at a current density of 10 mA cm-2.

Interfacial π-p Electron Coupling Prompts Hydrogen Evolution Reaction Activity in Acidic Electrolyte

The thermodynamically stable 2H-phase MoS2 is a brilliant material toward hydrogen evolution reaction (HER) owing to its excellent Gibbs free energy of hydrogen adsorption. Nevertheless, the poor intrinsic properties of 2H-MoS2 limit its electrocatalytic performances toward HER. In this work, graphitic carbon nitride covalently bridging 2H-MoS2 (MoS2/GCN) is proposed to construct robust HER electrocatalysts. The strong π-p electron coupling between the delocalized π electrons of GCN and the localized p electrons of S atoms sufficiently expose active sites and accelerate the reaction kinetics. To be specific, MoS2/GCN exhibits remarkable HER activity (160 mV at 10 mA·cm-2) and long-term durability. Importantly, MoS2/GCN also provides great potential for industrial application. Density functional theory (DFT) calculations disclose that the π-p electron coupling at the MoS2/GCN interface regulates the electronic structure of S atoms, consequently providing enhanced HER performance. This work presents a feasible pathway to develop advanced electrocatalysts for energy conversions.

In Situ Creation of Surface Defects on Pd@NiPd with Core-shell Hierarchical Structure Toward Boosting Electrocatalytic Activity

A deep insight into surface structural evolution of the catalyst is a challenging issue to reveal the structure-activity relationship. In this contribution, based on a surface alloying strategy, the dual-functional Pd@NiPd catalyst with a unique core-shell hierarchical structure is developed through selective crystal growth, surface cocrystallization, directional self-assembly, and reduction process. The surface defects are created in situ on the outer NiPd alloy layer in the electrochemical redox processes, which endow the Pd@NiPd catalyst with excellent electrocatalytic activity of hydrogen generation reaction (HER) and oxygen generation reaction (OER) in alkaline media. The optimal Pd@NiPd-2 catalyst requires an overpotential of only 18 mV that is far lower than Pt/C benchmark (43 mV) at the current density of 10 mA cm-2 for the HER, and 210 mV that is far lower than RuO2 benchmark (430 mV) at 50 mA cm-2 for the OER. Density functional theory (DFT) calculations reveal that the outstanding electrocatalytic activity is originated from the creation of surface defect structure that induces a significant reduction in the adsorption and dissociation energy barriers of H2O molecules in the HER and a decrease in the conversion energy from O* to OOH* that resulted from the synergy of two adjacent Pd sites by forming O-bridge. This work affords a typical paradigm for exploiting efficient catalysts and investigating the dependence of electrocatalytic activity on the surface structural evolution.

Electronic configuration regulation of single-atomic Mn sites mediated by Mo/Mn clusters for an efficient hydrogen evolution reaction

Tuning the electron distribution of metal single-atom active sites via bimetallic clusters is an effective way to enhance their hydrogen evolution reaction (HER) activity, but remains a great challenge. A biochar-based electrocatalyst (BCMoMn800-2) with both MnN4 active sites and Mo2C/Mn7C3 clusters was synthesized using in situ enriched Mo/Mn biomass as a precursor to trigger the HER. Various characterization and density functional theory (DFT) calculation results indicated that the presence of Mo2C/Mn7C3 clusters in BCMoMn800-2 effectively induced the redistribution of charges at MnN4 sites, reducing the energy of H* activation during the HER. In 0.5 M H2SO4, the overpotential was 27.4 mV at a current density of 10 mA cm-2 and the Tafel slope was 31 mV dec-1, and its electrocatalytic performance was close to that of Pt/C. The electrocatalyst also exhibited excellent electrocatalytic stability and durability. This work might provide a new strategy for solid waste recycling and constructing efficient HER electrocatalysts.

Integrated Catalyst-Substrate Electrodes for Electrochemical Water Splitting: A Review on Dimensional Engineering Strategy

Water splitting (or, water electrolysis) is considered as a promising approach to produce green hydrogen and relieve the ever-increasing energy consumption as well as the accompanied environmental impact. Development of high-efficiency, low-cost practical water-splitting systems demands elegant design and fabrication of catalyst-loaded electrodes with both high activity and long-life time. To this end, dimensional engineering strategies, which effectively tune the microstructure and activity of electrodes as well as the electrochemical kinetics, play an important role and have been extensively reported over the past years. Here, a type of most investigated electrode configurations is reviewed, combining particulate catalysts with 3D porous substrates (aerogels, metal foams, hydrogels, etc.), which offer special advantages in the field of water splitting. It is analyzed the design principles, structural and interfacial characteristics, and performance of particle-3D substrate electrode systems including overpotential, cycle life, and the underlying mechanism toward improved catalytic properties. In particular, it is also categorized the catalysts as different dimensional particles, and show the importance of building hybrid composite electrodes by dimensional control and engineering. Finally, present challenges and possible research directions toward low-cost high-efficiency water splitting and hydrogen production is discussed.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Fe-induced crystalline-amorphous interface engineering of a NiMo-based heterostructure for enhanced water oxidation

Engineering heterostructures with a unique surface/interface structure is one of the effective strategies to develop highly active noble-metal-free catalysts for the oxygen evolution reaction (OER), because the surface/interface of catalysts is the main site for the OER. Herein, we design a coralloid NiMo(Fe)-20 catalyst with a crystalline-amorphous interface through combining a hydrothermal method and an Fe-induced surface reconfiguration strategy. That is, after Fe3+ impregnation treatment, the Ni(OH)2-NiMoO4 pre-catalyst with a complete crystalline surface is restructured into a trimetallic heterostructure with a crystalline-amorphous interface, which facilitates mass diffusion and charge transfer during the OER. As expected, self-supported NiMo(Fe)-20 exhibits excellent electrocatalytic water oxidation performance (overpotential: η-10 = 220 mV, η-100 = 239 mV) in the alkaline electrolyte, and its electrocatalytic performance hardly changes after maintaining the current density of 50 mA cm-2 for 10 hours. Furthermore, nickel foam (NF) supported commercial Pt/C and self-supported NiMo(Fe)-20 served as the cathode and anode of the Pt/C‖NiMo(Fe)-20 electrolyzer, respectively, which exhibits a lower cell voltage (E-100 = 1.53 V) than that of the Pt/C‖RuO2 electrolyzer (E-100 = 1.58 V) assembled with noble metal-based catalysts. The enhanced electrocatalytic performance of the NiMo(Fe)-20 catalyst is mainly attributed to the synergistic effect between the crystalline-amorphous interface and the coralloid trimetallic heterostructure.

Sulfur Vacancy-Engineered Co3S4/MoS2-Interfaced Nanosheet Array for Enhanced Alkaline Overall Water Splitting

Electrochemical water splitting, a crucial reaction for renewable energy storage, demands highly efficient and stable catalysts. Defect and interface engineering has been widely acknowledged to play a pivotal role in improving electrocatalytic performance. Herein, we demonstrate a facile strategy to construct sulfur vacancy (Sv)-engineered Co3S4/MoS2-interfaced nanosheet arrays to modulate the interface electronic structure in situ reduction with NaBH4. The abundant sulfur vacancies and well-arranged nanosheet arrays in Sv-Co3S4/MoS2 lead to pronounced electrocatalytic properties for hydrogen and oxygen evolution reactions (HER/OER) in an alkaline medium, with observed overpotentials of 156 and 209 mV at 10 mA cm-2, respectively. Additionally, as a bifunctional electrocatalyst, Sv-Co3S4/MoS2 requires a cell voltage of 1.67 V at 10 mA cm-2 for overall water splitting and exhibits long-term stability with activity sustained for more than 20 h. This study provides a novel approach to producing transition metal compound-interfaced electrocatalysts with rich vacancies under mild conditions, showcasing their potential for efficient water splitting applications.

Synergistic Multieffect Catalytic Amplified Cathodic Electrochemiluminescence Biosensor via Target Binding-Induced Aptamer Conformational Changes for the Ultrasensitive Detection of Synthetic Cathinone

Signal amplification is a powerful approach to increasing the detection sensitivity of electrochemiluminescence (ECL). Here, we developed synergistic multieffect catalytic strategies based on CuCo2O4 nanorod combination of Ag NPs as coreaction accelerators to fabricate an efficient covalent organic framework (PTCA-COF)-based ternary ECL biosensor. Concretely, the high redox reversibility of Co3+/Co2+ and Cu2+/Cu+ would constantly promote the decomposition of S2O82- for ECL emission. Meanwhile, the introduction of Ag NPs with excellent electrocatalytic activity further realized multiple amplification of the ECL signal. Furthermore, the good hydrogen evolution reaction (HER) ability of Ag@CuCo2O4 nanorods could accelerate the proton transmission rate of the system to amplify ECL behavior. In the presence of the target synthetic cathinone 4-chloroethcathinone (4-CEC) as the quenching ECL signal-response probe, the Ferrocene (Fc)-labeled aptamer folded into the conformationally limited stem-loop structure, bringing Fc near the ECL luminophore and resulting in quenched ECL emission. The quenching effect was connected with target-induced aptamer conformational changes and consequently reflected the target concentration. Under optimum conditions, the proposed biosensor realized a highly sensitive assay for 4-CEC with a large dynamic range from 1.0 × 10-12 to 1.0 × 10-6 g/L and a detection limit as low as 2.5 × 10-13 g/L. This study integrated multiple amplification strategies for efficient ECL enhancement, which provided a novel approach to constructing highly bioactive and sensitive sensors.

Enhanced HER Efficiency of Monolayer MoS2 via S Vacancies and Nano-Cones Array Induced Strain Engineering

Molybdenum disulfide (MoS2 ) has gained significant attention as a promising catalyst for hydrogen evolution reaction (HER). The catalytic performance of MoS2 can be enhanced by either altering its structure or regulating external conditions. In this study, a novel approach combining the introduction of sulfur vacancy (VS ) and biaxial tensile strain to create more active sites and modulate the band structure of monolayer MoS2 is proposed. To achieve the desired strain level, nano-cones (NCs) array substrates facilely fabricated by dip-pen nanolithography (DPN) are employed. The magnitude of the applied tensile strain can be finely tuned via adjusting the height of the NCs. Furthermore, on-chip electrochemical devices are constructed based on artificial structures, enabling precise optimization of HER performance of MoS2 through the synergistic effect of VS and strain. Combined with the d-band theory, it reveals that the HER properties of VS -MoS2 are highly dependent on the degree of tensile strain. This study presents a promising avenue for the design and preparation of high-performance 2D catalysts for energy conversion and storage applications.

Activating Commercial Nickel Foam to a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction through a Three-Step Surface Reconstruction

It is highly desired to directly use commercial nickel foam (CNF) as an electrocatalyst for the oxygen evolution reaction (OER) via simple surface reconstruction. In our research, a simple three-step preactivation process was proposed to reconstruct CNF as an efficient OER catalyst, including calcination, high-voltage treatment, and immersing in electrolyte. The optimal CNF after three-step activation reaches an excellent OER performance of 228 and 267 mV at η10 and η100 in alkaline media and can tolerate long-term tests under a large current density of 500 mA·cm-2. The promotion of each step was explored. The calcination step leads to a reconstructive surficial morphology with an enlarged active surface, providing a prerequisite for the following construction steps. The high-voltage treatment changes the valence of surface Ni species, generating phases with higher catalytic activity, and the immersing process introduces Fe heteroatoms into the surface of CNF, boosting the catalytic performance of CNF through Ni-Fe interactions. This research provides a simple method of making high-performance catalysts with accessible nickel foam, a potential for large-scale application in practical industry, and new thinking for the manipulation of Ni-based catalysts.

Strong electron coupling of FeP4/Ni2P to boost highly-efficient electrochemical nitrate reduction to ammonia

Electrochemical reduction of contaminated nitrate to ammonia (NRA) opens a new window for mass production of ammonia and the alleviation of energy crises and environmental pollution. However, fabricating effective catalysts for the NRA still faces significant challenges. Herein, a highly-efficient NRA catalyst, FeP4/Ni2P, was successfully constructed. The strong electron coupling at heterointerfaces of FeP4/Ni2P promoted the generation of abundant active hydrogen *H, inhibited the competition of the HER, accelerated the hydrogenation of the NRA. Benefiting from these, the catalyst displays good NRA catalytic activity in the neutral electrolyte, with the NH3 FE of 97.83 ± 0.091 %, NH3 selectivity of 98.67 ± 0.50 %, NH3 yield rate of 0.262 ± 0.01 mmol·h-1·cm-2, and NO3- conversion rate of 93.02 ± 0.14 %. The DFT theoretical calculations demonstrated that the FeP4/Ni2P heterointerfaces played a critical role in shearing the H-OH bonds of water, resulting in generating more active hydrogen as a key NRA hydrogenation source, and hindering the *H dimerization to form H2, enhancing the NH3 selectivity. This work has a certain reference value for designing excellent catalysts for the NRA.

Preparation of Ru-doped TiO2 nanotube arrays through anodizing TiRu alloys for bifunctional HER/OER electrocatalysts

In this research, Ru-doped TiO2 nanotube arrays (Ru-TNTA) were prepared by anodizing TiRu alloys, and the effects of annealing temperature, Ru content and test temperature on their performances for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) were investigated. The results show that the unannealed Ru-TNTA (a-Ru-TNTA) exhibits superior activity for the HER, and the Ru-TNTA annealed at 450 °C (c-Ru-TNTA) shows excellent activity for the OER. The Ru content of TiRu impacts the electrochemically active surface area (ECSA) and the charge transfer resistance (Rct) significantly. When the Ru content of Ru-TNTA is 6%, its performance is optimal. Moreover, the electrocatalytic activity of Ru-TNTA improves with increasing test temperature, and the overpotentials of a-Ru-TNTA and c-Ru-TNTA at 80 °C are 19 mV and 227 mV (10 mA cm-2), respectively. Ru-TNTA exhibits excellent electrocatalytic performance for water splitting and good stability, which provides a new idea for the preparation of advanced bifunctional electrocatalysts for water splitting.

Optimizing Pt-Based Alloy Electrocatalysts for Improved Hydrogen Evolution Performance in Alkaline Electrolytes: A Comprehensive Review

The splitting of water through electrocatalysis offers a sustainable method for the production of hydrogen. In alkaline electrolytes, the lack of protons forces water dissociation to occur before the hydrogen evolution reaction (HER). While pure Pt is the gold standard electrocatalyst in acidic electrolytes, since the 5d orbital in Pt is nearly fully occupied, when it overlaps with the molecular orbital of water, it generates a Pauli repulsion. As a result, the formation of a Pt-H* bond in an alkaline environment is difficult, which slows the HER and negates the benefits of using a pure Pt catalyst. To overcome this limitation, Pt can be alloyed with transition metals, such as Fe, Co, and Ni. This approach has the potential not only to enhance the performance but also to increase the Pt dispersion and decrease its usage, thus overall improving the catalyst's cost-effectiveness. The excellent water adsorption and dissociation ability of transition metals contributes to the generation of a proton-rich local environment near the Pt-based alloy that promotes HER. Significant progress has been achieved in comprehending the alkaline HER mechanism through the manipulation of the structure and composition of electrocatalysts based on the Pt alloy. The objective of this review is to analyze and condense the latest developments in the production of Pt-based alloy electrocatalysts for alkaline HER. It focuses on the modified performance of Pt-based alloys and clarifies the design principles and catalytic mechanism of the catalysts from both an experimental and theoretical perspective. This review also highlights some of the difficulties encountered during the HER and the opportunities for increasing the HER performance. Finally, guidance for the development of more efficient Pt-based alloy electrocatalysts is provided.

Boosting Alkaline Seawater Oxidation of CoFe-layered Double Hydroxide Nanosheet Array by Cr Doping

The pursuit of stable and efficient electrocatalysts toward seawater oxidation is of great interest, yet it poses considerable challenges. Herein, the utilization of Cr-doped CoFe-layered double hydroxide nanosheet array is reported on nickel-foam (Cr-CoFe-LDH/NF) as an efficient electrocatalyst for oxygen evolution reaction in alkaline seawater. The Cr-CoFe-LDH/NF catalyst can achieve current densities of 500 and 1000 mA cm -2 with remarkably low overpotentials of only 334 and 369 mV, respectively. Furthermore, it maintains at least 100 h stability when operated at 500 mA cm-2 .

Tuning Binding Strength of Multiple Intermediates towards Efficient pH-universal Electrocatalytic Hydrogen Evolution by Mo8 O26 -NbNx Oy Heterocatalysts

Developing efficient and robust hydrogen evolution reaction (HER) catalysts for scalable and sustainable hydrogen production through electrochemical water splitting is strategic and challenging. Herein, heterogeneous Mo8 O26 -NbNx Oy supported on N-doped graphene (defined as Mo8 O26 -NbNx Oy /NG) is synthesized by controllable hydrothermal reaction and nitridation process. The O-exposed Mo8 O26 clusters covalently confined on NbNx Oy nanodomains provide a distinctive interface configuration and appropriate electronic structure, where fully exposed multiple active sites give excellent HER performance beyond commercial Pt/C catalyst in pH-universal electrolytes. Theoretical studies reveal that the Mo8 O26 -NbNx Oy interface with electronic reconstruction affords near-optimal hydrogen adsorption energy and enhanced initial H2 O adsorption. Furthermore, the terminal O atoms in Mo8 O26 clusters cooperate with Nb atoms to promote the initial H2 O adsorption, and subsequently reduce the H2 O dissociation energy, accelerating the entire HER kinetics.

Synthesis of a carbon-wrapped microsphere MoO2/Mo2C heterojunction as an efficient electrocatalyst for the oxygen reduction reaction and the hydrogen evolution reaction

The development of non-noble metal catalysts for the optimization of conversion and storage devices is an important research topic. Hence, the microsphere MoO2/Mo2C/C heterojunction composites, which play an important role in the oxygen reduction reaction (ORR) and the hydrogen evolution reaction (HER), were synthesized using the solvothermal-sintering method. The results revealed that the as-prepared composite exhibited better ORR and HER catalytic performances than those of MoO2/Mo2C and Vulcan XC-72R (carbon black), and approaching that of commercial Pt/C. At the same time, it has a superior methanol tolerance and electrochemical stability than that of the commercial Pt/C. The excellent performance may be attributed to the synergistic effect of the MoO2/Mo2C heterostructure, highly conductive Vulcan XC-72R, and oxygen vacancies (Ov). This research offers new insights into the design and synthesis of cost-effective, environmentally friendly heterojunction composite catalysts used as a high-performance cathode material in fuel cells and water splitting.

A Strongly Coupled Ag(S)@NiO/Nickel Foam Electrode Induced by Laser Direct Writing for Hydrogen Evolution at Ultrahigh Current Densities with Long-Term Durability

Highly active, durable, and cost-effective electrodes for hydrogen evolution reaction (HER) at ultrahigh current densities (≥1 A cm-2 ) are extremely demanded for industrial high-rate hydrogen production, but challenging. Here, a robust strongly coupled Ag(S)@NiO/nickel foam (NF) electrode is reported. Taking advantage of millisecond laser direct writing in liquid nitrogen technique, lattice-matched and coherent interfaces are formed between Ag nanoparticles with stacking faults (denoted by Ag(S)) and NiO nanosheets, leading to strong interfacial electronic coupling, not only promoting H2 O adsorption and dissociation on Ni2+ but also enhancing H* adsorption on intrinsically inactive but most electrically conductive Ag. Strong chemical bonding is established at NiO/NF interface, guaranteeing rapid electron transfer and excellent mechanical durability under high-rate hydrogen evolution. The physicochemically stable electrode achieves record-low alkaline HER overpotential of 167 and 180 mV at 1 and 1.5 A cm-2 , respectively, along with negligible activity decay after 120 h test at ≈1.5 A cm-2 , surpassing reported non-platinum group metal electrocatalysts.

Length-tunable Pd2Sn@Pt core-shell nanorods for enhanced ethanol electrooxidation with concurrent hydrogen production

The electrooxidation of ethanol as an alternative to the oxygen evolution reaction presents a promising approach for low-cost hydrogen production. However, the design and synthesis of efficient ethanol oxidation electrocatalysts remain key challenges. Here, a colloidal procedure is developed to prepare Pd2Sn@Pt core-shell nanorods with an expanded Pt lattice and tunable length. The obtained Pd2Sn@Pt catalysts exhibit superior activity and stability for ethanol electrooxidation compared to Pd2Sn and commercial Pt/C catalysts. By tuning the length of the Pd2Sn@Pt nanorods, remarkable mass activity of up to 4.75 A mgPd+Pt-1 and specific activity of 20.14 mA cm-2 are achieved for the short nanorods owing to their large specific surface area. A hybrid electrolysis system for ethanol oxidation and hydrogen evolution is constructed using Pd2Sn@Pt as the anodic catalyst and Pt mesh as the cathode. The system requires a low cell voltage of 0.59 V for the simultaneous production of acetic acid and hydrogen at a current density of 10 mA cm-2. Density functional theory calculations further reveal that the strained Pt shell reduces energy barriers in the ethanol electrooxidation pathway, facilitating the conversion of ethanol to acetic acid. This work provides valuable guidance for developing highly efficient ethanol electrooxidation catalysts for integrated hydrogen production systems.

Dual Atoms (Fe, F) Co-Doping Inducing Electronic Structure Modulation of NiO Hollow Flower-Spheres for Enhanced Oxygen Evolution/Sulfion Oxidation Reaction Performance

Heteroatoms Fe, F co-doped NiO hollow spheres (Fe, F-NiO) are designed, which simultaneously integrate promoted thermodynamics by electronic structure modulation with boosted reaction kinetics by nano-architectonics. Benefiting from the electronic structure co-regulation of Ni sites by introducing Fe and F atoms in NiO , as the rate-determined step (RDS), the Gibbs free energy of OH* intermediates (ΔGOH* ) for Fe, F-NiO catalyst is significantly decreased to 1.87 eV for oxygen evolution reaction (OER) compared with pristine NiO (2.23 eV), which reduces the energy barrier and improves the reaction activity. Besides, densities of states (DOS) result verifies the bandgap of Fe, F-NiO(100) is significantly decreased compared with pristine NiO(100), which is beneficial to promote electrons transfer efficiency in electrochemical system. Profiting by the synergistic effect, the Fe, F-NiO hollow spheres only require the overpotential of 215 mV for OER at 10 mA cm-2 and extraordinary durability under alkaline condition. The assembled Fe, F-NiO||Fe-Ni2 P system only needs 1.51 V to reach 10 mA cm-2 , also exhibits outstanding electrocatalytic durability for continuous operation. More importantly, replacing the sluggish OER by advanced sulfion oxidation reaction (SOR) not only can realize the energy saving H2 production and toxic substances degradation, but also bring additional economic benefits.

Hollow Starlike Ag/CoMo-LDH Heterojunction with a Tunable d-Band Center for Boosting Oxygen Evolution Reaction Electrocatalysis

It is a challenging task to utilize efficient electrocatalytic metal hydroxide-based materials for the oxygen evolution reaction (OER) in order to produce clean hydrogen energy through water splitting, primarily due to the restricted availability of active sites and the undesirably high adsorption energies of oxygenated species. To address these challenges simultaneously, we intentionally engineer a hollow star-shaped Ag/CoMo-LDH heterostructure as a highly efficient electrocatalytic system. This design incorporates a considerable number of heterointerfaces between evenly dispersed Ag nanoparticles and CoMo-LDH nanosheets. The heterojunction materials have been prepared using self-assembly, in situ transformation, and spontaneous redox processes. The nanosheet-integrated hollow architecture can prevent active entities from agglomeration and facilitate mass transportation, enabling the constant exposure of active sites. Specifically, the powerful electronic interaction within the heterojunction can successfully regulate the Co3+/Co2+ ratio and the d-band center, resulting in rational optimization of the adsorption and desorption of the intermediates on the site. Benefiting from its well-defined multifunctional structures, the Ag0.4/CoMo-LDH with optimal Ag loading exhibits impressive OER activity, the overpotential being 290 mV to reach a 10 mA cm-2 current density. The present study sheds some new insights into the electron structure modulation of hollow heterostructures toward rationally designing electrocatalytic materials for the OER.

Ultrasonic-assisted preparation of two-dimensional materials for electrocatalysts

Developing green, environmental, sustainable new energy sources is an important problem to be solved in the world. Among the new energy technologies, water splitting system, fuel cell technology and metal-air battery technology are the main energy production and conversion methods, which involve three main electrocatalytic reactions, hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). The efficiency of the electrocatalytic reaction and the power consumption are very dependent on the activity of the electrocatalysts. Among various electrocatalysts, the two-dimensional (2D) materials have received widespread attention due to multiple advantages, such as their easy availability and low price. What' important is that they have adjustable physical and chemical properties. It is possible to develop them as electrocatalysts to replace the noble metals. Therefore, the design of two-dimensional electrocatalysts is a focus in the research area. Some recent advances in ultrasound-assisted preparation of two-dimensional (2D) materials have been overviewed according to the kind of materials in this review. Firstly, the effect of the ultrasonic cavitation and its applications in the synthesis of inorganic materials are introduced. The ultrasonic-assisted synthesis of representative 2D materials for example transition metal dichalcogenides (TMDs), graphene, layered double metal hydroxide (LDH), and MXene, and their catalytic properties as electrocatalysts are discussed in detail. For example, the CoMoS₄ electrocatalysts have been synthesized through a facile ultrasound-assisted hydrothermal method. The obatined HER and OER overpotential of CoMoS₄ electrode is 141 and 250 mV, respectively. This review points out some problems that need to be solved urgently at present, and provides some ideas for designing and constructing two-dimensional materials with better electrocatalytic performance.

Tailoring Metal-Organic Frameworks and Derived Materials for High-Performance Zinc-Air and Alkaline Batteries

Developing multifunctional materials from earth-abundant elements is urgently needed to satisfy the demand for sustainable energy. Herein, we demonstrate a facile approach for the preparation of a metal-organic framework (MOF)-derived Fe₂O₃/C, composited with N-doped reduced graphene oxide (MO-rGO). MO-rGO exhibits excellent bifunctional electrocatalytic activities toward the oxygen evolution reaction (η_j=10 = 273 mV) and the oxygen reduction reaction (half-wave potential = 0.77 V vs reversible hydrogen electrode) with a low ΔE_OER-ORR of 0.88 V in alkaline solutions. A Zn-air battery based on the MO-rGO cathode displays a high specific energy of over 903 W h kg_Zn^-1 (∼290 mW h cm^-2), an excellent power density of 148 mW cm^-2, and an open-circuit voltage of 1.430 V, outperforming the benchmark Pt/C + RuO₂ catalyst. We also hydrothermally synthesized a Ni-MOF that was partially transformed into a Ni-Co-layered double hydroxide (MOF-LDH). A MO-rGO||MOF-LDH alkaline battery exhibits a specific energy of 42.6 W h kg_total mass^-1 (106.5 μW h cm^-2) and an outstanding specific power of 9.8 kW kg_total mass^-1 (24.5 mW cm^-2). This work demonstrates the potential of MOFs and MOF-derived compounds for designing innovative multifunctional materials for catalysis, electrochemical energy storage, and beyond.

Regulable in-situ autoredox for anchoring synergistic Ni/NiO nanoparticles on reduced graphene oxide with boosted alkaline electrocatalytic oxygen evolution

To develop ideal alternatives to noble metal catalysts, transition metal catalysts supported on graphene have been receiving extensive attention in the field of electrochemical energy. In this work, using graphene oxide (GO) and nickel formate as precursors, Ni/NiO synergistic nanoparticles with regulable composition are anchored on reduced graphene oxide (RGO) to prepare Ni/NiO/RGO composite electrocatalysts through in-situ autoredox. Thanks to the synergistic effect of Ni³⁺ active sites and Ni electron donors, the as-prepared Ni/NiO/RGO catalysts exhibit efficient electrocatalytic oxygen evolution performance in 1.0 M KOH electrolyte. The optimal sample has an overpotential of only 275 mV at a current density of 10 mA cm^-2 and a small Tafel slope of 90 mV dec^-1, which are very comparable to those of commercial RuO₂ catalyst. Additionally, the catalytic capacity and structure remain stable after 2000 cyclic voltammetry cycles. For the electrolytic cell assembled with the best-performing sample as anode and commercial Pt/C as cathode, the current density can reach 10 mA cm^-2 at a low potential of 1.57 V and remains stable after 30 h of continuous work. It would be expected that the as-developed Ni/NiO/RGO catalyst with high activity should have broad application prospects.

N, P co-doped Ni/Mo-based multicomponent electrocatalysts in situ decorated on Ni foam for overall water splitting

Developing the robust non-precious metal bifunctional electrocatalyst is highly imperative for the hydrogen evolution from overall water splitting. Herein, a Ni foam (NF)-supported ternary Ni/Mo bimetallic complex (Ni/Mo-TEC@NF), hierarchically constructed by coupling the in-situ formed MoNi₄ alloys and Ni₂Mo₃O₈ with Ni₃Mo₃C on NF, has been developed through a facile method involving the in-situ hydrothermal growth of the Ni-Mo oxides/polydopamine (NiMoO_x/PDA) complex on NF and a subsequent annealing in a reduction atmosphere. Synchronously, N and P atoms are co-doped into Ni/Mo-TEC during the annealing procedure using phosphomolybdic acid and PDA raw materials as P and N sources, respectively. The resultant N, P-Ni/Mo-TEC@NF shows outstanding electrocatalytic activities and tremendous stability for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), due to the multiple heterojunction effect-promoted electron transfer, the large number of exposed active sites, and the modulated electronic structure by the N and P co-doping. It only needs a low overpotential of 22 mV to afford the current density of 10 mA·cm^-2 for HER in alkaline electrolyte. More importantly, as the anode and cathode, it requires only 1.59 and 1.65 V to achieve 50 and 100 mA·cm^-2 for overall water splitting, respectively, comparable to the benchmark Pt/C@NF//RuO₂@NF couple. This work could spur the search for economical and efficient electrodes by in situ constructing multiple bimetallic components on 3D conductive substrates for practical hydrogen generation.