Transition Metal (Co, Ni, Fe, Cu) Single-Atom Catalysts Anchored on 3D Nitrogen-Doped Porous Carbon Nanosheets as Efficient Oxygen Reduction Electrocatalysts for Zn-Air Battery

Oxygen Reduction Reaction Catalysts for Zinc-Air Batteries Featuring Single Cobalt Atoms in a Nitrogen-Doped 3D-Interconnected Porous Graphene Framework

Single-atom catalysts (SACs) with high activity and efficient atom utilization for oxygen reduction reactions (ORRs) are imperative for rechargeable Zinc-air batteries (ZABs). However, it is still a prominent challenge to construct a noble-metal-free SAC with low cost but high efficiency. Herein, a novel nitrogen-doped graphene (NrGO) based SAC, immobilized with atomically dispersed single cobalt (Co) atoms (Co-NrGO-SAC), is reported for ORRs. In this 3D NrGO, the Co-N4 sites endow high-efficiency ORR activity, and the 3D-interconnected porous architectures of NrGOs guarantee numberous active sites accessibility. Compared to commercial Pt/C catalyst (≈5.8 mA cm-2), as-prepared Co-NrGO-SACs presents considerable limiting current density of ≈5.9 mA cm-2, prominent half-wave potential of ≈0.84 V, onset potential of ≈1.05 V, and as well as superior methanol resistance. Particularly, ZABs with Co-NrGO-SACs deliver remarkable power density (≈240 mW cm-2), super durability of over 233 h at 5 mA cm-2, outperforming noble-metal-based benchmarks. This work provides an effective noble-metal free carbon-based SAC nano-engineering for superdurable ZABs.

Enhancing Oxygen Reduction Reaction of Single-Atom Catalysts by Structure Tuning

Deciphering the fine structure has always been a crucial approach to unlocking the distinct advantages of high activity, selectivity, and stability in single-atom catalysts (SACs). However, the complex system and unclear catalytic mechanism have obscured the significance of exploring the fine structure. Therefore, we endeavored to develop a three-component strategy to enhance oxygen reduction reaction (ORR), delving deep into the profound implications of the fine structure, focusing on central atoms, coordinating atoms, and environmental atoms. Firstly, the mechanism by which the chemical state and element type of central atoms influence catalytic performance is discussed. Secondly, the significance of coordinating atoms in SACs is analyzed, considering both the number and type. Lastly, the impact of environmental atoms in SACs is reviewed, encompassing existence state and atomic structure. Thorough analysis and summarization of how the fine structure of SACs influences the ORR have the potential to offer valuable insights for the accurate design and construction of SACs.

In-depth understanding the synergisms of Cu atomic clusters on Cu single atoms for highly effective electrocatalytic oxygen reduction reaction and Zn-Air battery

In this paper, a novel, simple and mild soft template assisted strategy and further carbonization approach has been constructed to the size-tunable preparation of porous Cu-N-C/Surfactant catalysts successfully. Note that the pluronic F127 has a significant influence on the synthesis of porous Cu-N-C/F127 with the atomically dispersed Cu-N4 and adjacent Cu atomic clusters (ACs) than other surfactants owing to their particular non-ionic structure. By combining a series of experimental analysis and density functional theory (DFT) calculations, the synergistic effects between the adjacent Cu ACs and atomically dispersed Cu-N4 are favorable for manipulating the binding energy of O2 adsorption and intermediates desorption at the atomic interface of catalysts, resulting in an excellent electrocatalytic ORR performance with a faster kinetics for Cu-N-C/F127 than those of the Cu-N-C, Cu-N-C/CTAB, Cu-N-C/SDS, and comparable with the commercial Pt/C catalyst. This method not only provides a novel approach for synthesizing highly effective copper based single atom catalysts toward ORR, but also offers an in-depth understanding of the synergisms of adjacent ACs on the Cu single atoms (SAs) for highly effective electrocatalytic ORR and Zn-air Battery.

In-Situ CeO2/CuO Heterojunction Electrocatalyst for CO2 Reduction to Ethylene

CeO2/CuO heterojunction composite catalysts were synthesized using a one-step method, achieving the introduction of Ce species on nanoscale copper oxide (CuO) particles during the hydrothermal process. CeO2 is primarily encapsulated the auxiliary catalyst CuO in the form of nanoparticles. On one hand, this protects the nanostructure of the substrate from damage and prevents the agglomeration of CuO nanoparticles. On the other hand, the bimetallic synergistic effect between Ce and Cu effectively improves the conductivity and catalytic activity of the catalyst, significantly enhancing the selectivity of the catalyst for electrochemical reduction of CO2 to C2H4, while effectively suppressing the competing hydrogen evolution reaction (HER). By regulating the amount of CeO2 introducing, a series of CeO2/CuO composite catalysts were designed. The results showed that the 15 % CeO2/CuO catalyst exhibited the best selectivity and catalytic activity for C2H4. At a low overpotential of -1.2 V, the 15 % CeO2/CuO catalyst demonstrated a current density of 14.2 mA cm-2 and achieved a Faradaic efficiency for ethylene as high as 65.78 %, which is 2.85 times the current density (j=4.98 mA cm-2) and 3.27 times the Faradaic efficiency for ethylene (FEC2H4=20.13 %) of the undoped catalyst at the same potential. This work provides a feasible basis for achieving efficient CO2RR to C2 products, and even multi-carbon products.

Trimetallic FeNiCu Atomic Clusters Supported on Carbon Matrix: Highly Active Catalysts for C3H6-SCR of NO

C3H6-SCR denitrification technology faces catalyst deactivation problems and low catalytic performance at medium-low temperatures. This study utilized the intermetallic synergies to prepare atomic cluster catalysts (FeNiCu/NC) by anchoring Fe-Ni-Cu on a carbon matrix to enhance the C3H6-SCR performance at medium-low temperatures. The synergistic effect of the Fe-Ni-Cu is reflected in the differences in the physicochemical properties of the catalysts, which is proved by several characterization techniques. Results showed that the FeNiCu/NC catalyst had a larger surface area (541.4 m2/g) and there were no metal oxides on the surface of the catalyst but abundant defective sites that anchored Fe/Ni/Cu atoms through N atoms to form M-Nx active sites and atomic clusters. The hollow carbon morphology provides sufficient active sites for C3H6-SCR. The coordination environments of active sites were M-Nx-C, Fe2/FeCu2/FeNi2, Ni3/NiFe/NiCu2, and Cu4/CuFe2/CuNi2, where the synergistic action of trimetal leads to the presence of Fe-Ni-Cu-Nx-C. The synergistic action of the Fe-Ni-Cu significantly improved the C3H6-SCR performance at medium-low temperatures. The FeNiCu/NC exhibited an 81% NO conversion at 150 °C under 2% O2, 15% and 20% higher than FeNi/NC and FeCu/NC catalysts, respectively. Even at 4% O2, the FeNiCu/NC catalyst was active to remove 78% NO and achieve a 93% N2 selectivity at 150 °C and maintained a 100% NO conversion at 300-425 °C. The DRIFTS results demonstrated that NO and C3H6 could combine with active O at metal cluster, M-Nx, or defective oxygen sites to produce various intermediate species, wherein acetates and nitrates were the main active intermediates. Based on the DRIFTS results, a reaction pathway for C3H6-SCR over the FeNiCu/NC catalyst was proposed.

Consolidating the Oxygen Reduction with Sub-Polarized Graphitic Fe-N4 Atomic Sites for an Efficient Flexible Zinc-Air Battery

The effectuation of the Zn-air battery (ZAB) is appealing for active and durable catalysts to kinetically drive the sluggish cathodic oxygen reduction reaction (ORR). Atomic metal-Nx-C sites are widely witnessed with Pt-like activity, but their demetalations still severely restrict the durability in ORR. Here we have profiled an ordered hierarchical porous carbon supported Fe-N4 single-atom (FeNC) catalyst by a template derivation method for efficient ORR and flexible ZAB studies. The FeNC structure is observed with a sub-polarized graphitic Fe-N4 coordination with a shortened Fe-N bond for potentially consolidating the ORR, together with the hierarchical porous matrix for kinetical mass transfer. Resultantly, the optimized FeNC catalyst showcases Pt-beyond alkaline ORR activity (E1/2 = 0.95 V) with long-term durability for 100 h, delivering the flexible ZAB device with high power density (251 mW cm-2) and durable cycle life (80 h). This research underscores the criterion in rationalizing active and robust ORR catalysts through metal-nitrogen bond modulation.

Ultrafine PtCo alloy nanoparticles integrated into porous N-doped nanosheets for durable oxygen reduction reaction

Here, we propose a sub-3 nm small-size PtCo alloy catalyst integrated into a porous nitrogen-doped nanosheet through a space-confined and interfacial induction strategy. The designed PtCo-CoNC-P catalyst exhibits exceptional durability, with only a minimal 2 mV decline in half-wave potential after 30 000 cycles of accelerated durability tests.

Mechanistic Study of Highly Active Bifunctional Double-Atom Electrocatalysts for Oxygen Reduction and Oxygen Evolution Reactions

Dual-atom catalysts (DACs) can be very effective for catalyzing both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, we present theoretical evidence of a new class of highly active DACs, namely, the double-atom embedded in nitrogen-doped graphene sheet 2M-N-C (M = Mn, Fe) on the basis of density functional theory calculations. Importantly, we find that the double active sites of 2M-N-C DACs entail an unconventional catalytic reaction pathway for ORR and OER. We also show that the local coordination environment of the active sites can significantly affect the stability and oxygen catalytic activity of 2M-N-C DACs. In particular, MnFe-N-C DAC not only exhibits good stability but also possesses outstanding bifunctional ORR/OER catalytic activity with the potential difference (ΔE) between the OER and ORR as low as 0.34 V, notably lower than most bifunctional electrocatalysts reported in the literature. This finding suggests a new strategy toward the design of stable and highly active bifunctional electrocatalysts for both ORR/OER.

N-regulated three-dimensional turf-like carbon nanosheet loaded with FeCoNi nanoalloys as bifunctional electrocatalysts for durable zinc-air batteries

N-regulated three-dimensional (3D) turf-like carbon material loaded with FeCoNi nanoalloys (F-CNS-CNT), composed of carbon nanotubes (CNT) grown in situ on carbon nanosheets(CNS), was synthesized using a low-temperature solution combustion method and organic compounds rich in pyridinic-N. This distinct structure significantly expands the effective electrochemical surface area, revealing an abundance of active sites and enhancing the mass transfer capability for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Both experimental observations and theoretical calculations corroborate that the synergy between the FeCoNi nanoalloy and the highly pyridinic N-doped carbon substrate optimizes the adsorption and desorption-free energy of oxygen intermediates, resulting in a remarkable improvement of intrinsic ORR/OER activity. Therefore, the derived F-CNS-CNT electrocatalyst can present a favorable half-wave potential of 0.85 V (ORR) and a lower overpotential of 260 mV (corresponding to a current density of 10 mA cm-2, OER) in alkaline media. Moreover, when employed in the air cathode of a flowable zinc-air battery, the electrocatalyst exhibits exceptional discharge and charge performance, including a high power density of 144.6 mW cm-2, a high specific capacity of 801 mAh g-1, and an impressive cycling stability of 600 cycles at a current density of 10 mA cm-2. Notably, these results markedly surpass those of the commercial catalyst Pt/C + IrO2.

Pore modulation of single atomic Fe sites for ultrafast Fenton-like chemistry with amplified electron migration oxidation

The limited interaction between pollutants, oxidants, and the surface catalytic sites of single atom catalysts (SACs) restricts the water decontamination effectiveness. Confining catalytic sites within porous structures enables the localized enrichment of reactants for optimized reaction kinetics, while the specific regulatory mechanisms remain unclear. Herein, SACs with porous modification significantly improves the utilization of peroxymonosulfate (PMS) and pollutant degradation activity. Confining catalytic sites in porous structure effectively reduces the mass transfer distance between radicals (SO4•- and •OH) and pollutants, thereby improving reaction performance. Pore modulation changes the surface electronic structure, leading to a significant improvement in the electron migration process. The system shows significant potential in effectively oxidizing various common emerging pollutants, and exhibits robust resistance to interference from environmental matrices. Moreover, a quantitative evaluation using life cycle assessment (LCA) indicates that the pFe-SAC/PMS system showcases superior environmental importance and practicality.

Functional surfactant-directing ultrathin metallic nanoarchitectures as high-performance electrocatalysts

Ultrathin nanosheets possess a distinctive structure characterized by an abundance of active sites fully accessible on their surface. Concurrently, their nanoscale thickness confers an extraordinarily high specific surface area and promising electronic properties. To date, numerous strategies have been devised for synthesizing precious metal nanosheets that exhibit excellent electrocatalytic performance. In this paper, recent progress in the controlled synthesis of two-dimensional, ultrathin nanosheets by a self-assembly mechanism using functional surfactants is reviewed. The aim is to highlight the key role of functional surfactants in the assembly and synthesis of two-dimensional ultrathin nanosheets, as well as to discuss in depth how to enhance their electrochemical properties, thereby expanding their potential applications in catalysis. We provide a detailed exploration of the mechanisms employed by several long-carbon chain surfactants commonly used in the synthesis of nanosheets. These surfactants exhibit robust electrostatic and hydrophobic effects, effectively confining the crystalline growth of metals along lamellar micelles. Moreover, we present an overview of the electrocatalytic performance demonstrated by the ultrathin nanosheets synthesized through this innovative pathway. Furthermore, it offers valuable insights that may pave the way for further exploration of more functional long-chain surfactants, leading to the synthesis of ultrathin nanosheets with significantly enhanced electrocatalytic performance.

Construction of High-Performance Anode of Potassium-Ion Batteries by Stripping Covalent Triazine Frameworks with Molten Salt

Covalent triazine frameworks (CTFs) are promising battery electrodes owing to their designable functional groups, tunable pore sizes, and exceptional stability. However, their practical use is limited because of the difficulty in establishing stable ion adsorption/desorption sites. In this study, a melt-salt-stripping process utilizing molten trichloro iron (FeCl3) is used to delaminate the layer-stacked structure of fluorinated covalent triazine framework (FCTF) and generate iron-based ion storage active sites. This process increases the interlayer spacing and uniformly deposits iron-containing materials, enhancing electron and ion transport. The resultant melt-FeCl3-stripped FCTF (Fe@FCTF) shows excellent performance as a potassium ion battery with a high capacity of 447 mAh g-1 at 0.1 A g-1 and 257 mAh g-1 at 1.6 A g-1 and good cycling stability. Notably, molten-salt stripping is also effective in improving the CTF's Na+ and Li+ storage properties. A stepwise reaction mechanism of K/Na/Li chelation with C═N functional groups is proposed and verified by in situ X-ray diffraction testing (XRD), ex-situ X-ray photoelectron spectroscopy (XPS), and theoretical calculations, illustrating that pyrazines and iron coordination groups play the main roles in reacting with K+/Na+/Li+ cations. These results conclude that the Fe@FCTF is a suitable anode material for potassium-ion batteries (PIBs), sodium-ion batteries (SIBs), and lithium-ion batteries (LIBs).

Electrocatalytic Oxygen Reduction Using Metastable Zirconium Suboxide

Strategies for discovery of high-performance electrocatalysts are important to advance clean energy technologies. Metastable phases such as low temperature or interfacial structures that are difficult to access in bulk may offer such catalytically active surfaces. We report here that the suboxide Zr3O, which is formed at Zr-ZrO2 interfaces but does not appear in the experimental Zr-O phase diagram exhibits outstanding oxygen reduction reaction (ORR) performance surpassing that of benchmark Pt/C and most transition metal-based catalysts. Addition of Fe3C nanoparticles to give a Zr-Zr3O-Fe3C/NC catalyst (NC=nitrogen-doped carbon) gives a half-wave potential (E1/2) of 0.914 V, outperforming Pt/C and showing only a 3 mV decrease after 20,000 electrochemical cycles. A zinc-air battery (ZAB) using this cathode material has a high power density of 241.1 mW cm-2 and remains stable for over 50 days of continuous cycling, demonstrating potential for practical applications. Zr3O demonstrates that interfacial or other phases that are difficult to stabilize may offer new directions for the discovery of high-performance electrocatalysts.

Cu Regulating the Bifunctional Activity of Co-O Sites for the High-Performance Rechargeable Zinc-Air Battery

The rational design of cost-effective and highly active electrocatalysts becomes the crucial energy storage technology to boost the kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER), which hinders the large-scale application of metal-air batteries under the situation of increasingly pressing energy anxiety. Herein, the Co-based ZIF introduced the moderate amount of Cu2+-derived Cu/Co metal nanoparticles (NPs) embedded in carbon frameworks after high-temperature calcination. The Co-O bond on the surface of Co nanoparticles is modulated by adjacent Cu nanoparticles with the surface Cu-O bonds. The resulted increase of the Co2+/Co3+ ratio in 0.1CuCo-NC enhances the ORR/OER bifunctional catalytic kinetics along with the ΔE of 0.639 V. In situ Raman spectra of the catalyst on the three-electrode system as well as in the driven zinc-air battery (ZAB) show that the Co-O active sites regulated by Cu nanoparticles with Cu-O bonds maintain a periodic lattice expansion and compression during discharging and charging. The zinc-air battery based on 0.1CuCo-NC has a peak power density of up to 198.3 mW cm-2, a mass-specific capacity of 798.2 mAh g-1, and a cycling stability of 923 h at room temperature. This work makes up the research gap of a Co-based metal-organic framework (MOF)-derived catalyst regulated by a transition metal.

Rare earth elements induced electronic engineering in Rh cluster toward efficient alkaline hydrogen evolution reaction

The unique electronic and crystal structures of rare earth metals (RE) offer promising opportunities for enhancing the hydrogen evolution reaction (HER) properties of materials. In this work, a series of RE (Sm, Nd, Pr and Ho)-doped Rh@NSPC (NSPC stands for N, S co-doped porous carbon nanosheets) with sizes less than 2 nm are prepared, utilizing a simple, rapid and solvent-free joule-heat pyrolysis method for the first time. The optimized Sm-Rh@NSPC achieves HER performance. The high-catalytic performance and stability of Sm-Rh@NSPC are attributed to the synergistic electronic interactions between Sm and Rh clusters, leading to an increase in the electron cloud density of Rh, which promotes the adsorption of H+, the dissociation of Rh-H bonds and the release of H2. Notably, the overpotential of the Sm-Rh@NSPC catalyst is a mere 18.1 mV at current density of 10 mAcm-2, with a Tafel slope of only 15.2 mV dec-1. Furthermore, it exhibits stable operation in a 1.0 M KOH electrolyte at 10 mA cm-2 for more than 100 h. This study provides new insights into the synthesis of composite RE hybrid cluster nanocatalysts and their RE-enhanced electrocatalytic performance. It also introduces fresh perspectives for the development of efficient electrocatalysts.

Renewable lignin-derived heteroatom-doped porous carbon nanosheets as an efficient oxygen reduction catalyst for rechargeable zinc-air batteries

Lignin upgrading to various functional products is promising to realize high-value utilization of low-cost and renewable biomass waste, but is still in its infancy. Herein, using industry waste lignosulfonate as the biomass-based carbon source and urea as the dopant, we constructed a heteroatom-doped porous carbon nanosheet structure by a simple NaCl template-assisted pyrolytic strategy. Through the synergistic effect of the NaCl template and urea, the optimized lignin-derived porous carbon catalyst with high content of active nitrogen species and large specific surface area can be obtained. As a result, the fabricated catalysts exhibited excellent electrocatalytic oxygen reduction activity, as well as good methanol tolerance and stability, comparable to that of commercial Pt/C. Moreover, rechargeable Zn-air batteries assembled with this electrocatalyst have a peak power density of up to 150 mW cm-2 and prominent long-term cycling stability. This study offers an inexpensive and efficient way for the massive production of highly active metal-free catalysts from the plentiful, inexpensive and environmentally friendly lignin, offering a good direction for biomass waste recycling and utilization.

Geometric and Electronic Engineering in Co/VN Nanoparticles to Boost Bifunctional Oxygen Electrocatalysis for Aqueous/Flexible Zn-Air Batteries

Modulating metal-metal and metal-support interactions is one of the potent tools for augmenting catalytic performance. Herein, highly active Co/VN nanoparticles are well dispersed on three-dimensional porous carbon nanofoam (Co/VN@NC) with the assistance of dicyandiamide. Studies certify that the consequential disordered carbon substrate reinforces the confinement of electrons, while the coupling of diverse components optimizes charge redistribution among species. Besides, theoretical analyses confirm that the regulated electron configuration can significantly tune the binding strength between the active sites and intermediates, thus optimizing reaction energy barriers. Therefore, Co/VN@NC exhibits a competitive potential difference (ΔE, 0.65 V) between the half-wave potential of ORR and OER potential at 10 mA cm-2, outperforming Pt/C+RuO2 (0.67 V). Further, catalyst-based aqueous/flexible ZABs present superior performances with peak power densities of 156 and 85 mW cm-2, superior to Pt/C-based counterparts (128 and 73 mW cm-2). This research provides a pivotal foundation for the evolution of bifunctional catalysts in the energy sector.

Confinement Effect and 3D Design Endow Unsaturated Single Ni Atoms with Ultrahigh Stability and Selectivity toward CO2 Electroreduction

Developing single-atomic catalysts with superior selectivity and outstanding stability for CO2 electroreduction is desperately required but still challenging. Herein, confinement strategy and three-dimensional (3D) nanoporous structure design strategy are combined to construct unsaturated single Ni sites (Ni-N3) stabilized by pyridinic N-rich interconnected carbon nanosheets. The confinement agent chitosan and its strong interaction with g-C3N4 nanosheet are effective for dispersing Ni and restraining their agglomeration during pyrolysis, resulting in ultrastable Ni single-atom catalyst. Due to the confinement effect and structure advantage, such designed catalyst exhibits a nearly 100% selectivity and remarkable stability for CO2 electroreduction to CO, exceeding most reported state-of-the-art catalysts. Specifically, the CO Faradaic efficiency (FECO) maintains above 90% over a broad potential range (-0.55 to -0.95 V vs. RHE) and reaches a maximum value of 99.6% at a relatively low potential of -0.67 V. More importantly, the FECO is kept above 95% within a long-term 100 h electrolyzing. Density functional theory (DFT) calculations explain the high selectivity for CO generation is due to the high energy barrier required for hydrogen evolution on the unsaturated Ni-N3. This work provides a new designing strategy for the construction of ultrastable and highly selective single-atom catalysts for efficient CO2 conversion.

Precise Design and Modification Engineering of Single-Atom Catalytic Materials for Oxygen Reduction

Due to their unique electronic and structural properties, single-atom catalytic materials (SACMs) hold great promise for the oxygen reduction reaction (ORR). Coordinating environmental and engineering strategies is the key to improving the ORR performance of SACMs. This review summarizes the latest research progress and breakthroughs of SACMs in the field of ORR catalysis. First, the research progress on the catalytic mechanism of SACMs acting on ORR is reviewed, including the latest research results on the origin of SACMs activity and the analysis of pre-adsorption mechanism. The study of the pre-adsorption mechanism is an important breakthrough direction to explore the origin of the high activity of SACMs and the practical and theoretical understanding of the catalytic process. Precise coordination environment modification, including in-plane, axial, and adjacent site modifications, can enhance the intrinsic catalytic activity of SACMs and promote the ORR process. Additionally, several engineering strategies are discussed, including multiple SACMs, high loading, and atomic site confinement. Multiple SACMs synergistically enhance catalytic activity and selectivity, while high loading can provide more active sites for catalytic reactions. Overall, this review provides important insights into the design of advanced catalysts for ORR.

A macroporous carbon nanoframe for hosting Mott-Schottky Fe-Co/Mo2C sites as an outstanding bi-functional oxygen electrocatalyst

Simultaneously optimizing the d-band center of the catalyst and the mass/charge transport processes during the oxygen catalytic reaction is an essential but arduous task in the pursuit of creating effective and long-lasting bifunctional oxygen catalysts. In this study, a Fe-Co/Mo2C@N-doped carbon macroporous nanoframe was successfully synthesized via a facile "conformal coating and coordination capture" pyrolysis strategy. As expected, the resulting heterogeneous electrocatalyst exhibited excellent reversible oxygen electrocatalytic performance in an alkaline medium, as demonstrated by the small potential gap of 0.635 V between the operating potential of 1.507 V at 10 mA cm-2 for the oxygen evolution reaction and the half-wave potential of 0.872 V towards the oxygen reduction reaction. Additionally, the developed Zn-air battery employing the macroporous nanoframe heterostructure displayed an impressive peak power density of 218 mW cm-2, a noteworthy specific capacity of 694 mA h gZn-1, and remarkable charging/discharging cycle durability. Theoretical calculations confirmed that the built-in electric field between the Fe-Co alloy and Mo2C semiconductor could induce advantageous charge transport and redistribution at the heterointerface, contributing to the optimization of the d-band center of the nanohybrid and ultimately leading to a reduction in the reaction energy barrier during catalytic processes. The exquisite macroporous nanoframe facilitated the rapid transport of ions and charges, as well as the smooth access of oxygen to the internal active site. Thus, the presented unique electronic structure regulation and macroporous structure design show promising potential for the development of robust bifunctional oxygen electrodes.

Highly-Exposed Co-CoO Derived from Nanosized ZIF-67 on N-Doped Porous Carbon Foam as Efficient Electrocatalyst for Zinc-Air Battery

Non-precious-metal based electrocatalysts with highly-exposed and well-dispersed active sites are crucially needed to achieve superior electrocatalytic performance for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) toward zinc-air battery (ZAB). Herein, Co-CoO heterostructures derived from nanosized ZIF-67 are densely-exposed and strongly-immobilized onto N-doped porous carbon foam (NPCF) through a self-sacrificial pyrolysis strategy. Benefited from the high exposure of Co-CoO heterostructures and the favorable mass and electron transfer ability of NPCF, the Co-CoO/NPCF electrocatalyst exhibits remarkable performance for both ORR (E1/2  = 0.843 V vs RHE) and OER (Ej = 10 mA cm-2  = 1.586 V vs RHE). Further application of Co-CoO/NPCF as the air-cathode in rechargeable ZAB achieves superior performance for liquid-state ZAB (214.1 mW cm-2 and 600 cycles) and flexible all-solid-state ZAB (93.1 mW cm-2 and 140 cycles). Results from DFT calculations demonstrate that the electronic metal-support interactions between Co-CoO and NPCF via abundant C-Nx sites is favorable for electronic structure modulation, accounting for the remarkable performance.

Constructing N,S and N,P Co-Coordination in Fe Single-Atom Catalyst for High-Performance Oxygen Redox Reaction

Single-atom catalysts (SACs) are promising electrocatalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER), in which the coordination environment plays a crucial role in activating the intrinsic activity of the central metal. Taking the FeN4 SAC as a probe, this work investigates the effect of introducing S or P atoms into N coordination (FeSx N4-x and FePx N4-x (x=1-4)) on the electronic structure optimization of Fe center and its catalytic performance. Attributing to the optimal Fe 3d orbitals, FePN3 can effectively activate O2 and promote ORR with a low overpotential of 0.29 V, surpassing FeN4 and most reported catalysts. FeSN3 is beneficial to H2 O activation and OER, proceeding with an overpotential of 0.68 V, which is superior to FeN4 . Both FePN3 and FeSN3 exhibit outstanding thermodynamic and electrochemical stability with negative formation energies and positive dissolution potentials. Hence, the N,P and N,S co-coordination might provide better catalytic environment than regular N coordination for SACs in ORR and OER. This work demonstrates FePN3 /FeSN3 as high-performance ORR/OER catalysts and highlights N,P and N,S co-coordination regulation as an effective approach to fine tune high atomically dispersed electrocatalysts.

Bifunctional Single Atom Catalysts for Rechargeable Zinc-Air Batteries: From Dynamic Mechanism to Rational Design

Ever-growing demands for rechargeable zinc-air batteries (ZABs) call for efficient bifunctional electrocatalysts. Among various electrocatalysts, single atom catalysts (SACs) have received increasing attention due to the merits of high atom utilization, structural tunability, and remarkable activity. Rational design of bifunctional SACs relies heavily on an in-depth understanding of reaction mechanisms, especially dynamic evolution under electrochemical conditions. This requires a systematic study in dynamic mechanisms to replace current trial and error modes. Herein, fundamental understanding of dynamic oxygen reduction reaction and oxygen evolution reaction mechanisms for SACs is first presented combining in situ and/or operando characterizations and theoretical calculations. By highlighting structure-performance relationships, rational regulation strategies are particularly proposed to facilitate the design of efficient bifunctional SACs. Furthermore, future perspectives and challenges are discussed. This review provides a thorough understanding of dynamic mechanisms and regulation strategies for bifunctional SACs, which are expected to pave the avenue for exploring optimum single atom bifunctional oxygen catalysts and effective ZABs.

Effectively Controlled Structures of Si-C Composites from Rice Husk for Oxygen Evolution Catalyst

This work explores a simple way to regulate the morphology and structure of biomass-based carbon and effectively utilize its internal functional groups as the substrate for the next energy materials. The unique randomly oriented and highly interconnected cordyceps-like 3D structure of rice husk is formed by direct high-temperature carbonization, and the main component is SiC. The well-arranged cordyceps-like structure of SiC demonstrates a remarkable structural/chemical stability and a high rate of electron migration, and further could be used as a stable substrate for metal deposition and find application in the field of electrocatalysis. The oxygen evolution reaction catalyst (SiC-C@Fe3O4) prepared by chemical deposition exhibits a low overpotential (260 mV), low Tafel slope (56.93 mV dec-1), high electrochemical active surface area (54.92 mF cm-2), and low Rct value (0.15 Ω) at a current density of 10 mA cm-2 in 1 M KOH electrolyte. The produced natural Si-C composite materials overcome the limitations imposed by the intricate internal structure of silicon-rich biomass. The existence of this stable substrate offers a novel avenue for maximizing the utilization of rice-husk-based carbon, and broadens its application field. At the same time, it also provides a theoretical basis for the use of rice husks in the field of hydrogen production by electrolysis of water, thus promoting their high-value utilization.

Understanding the selection of catalytic pathway on graphene-supported nitrogen coordinated Ru-atom by ab initio molecular dynamics simulation

CONTEXT

In the paper, the ORR/OER on graphene-supported nitrogen coordinated Ru-atom (Ru-N-C) is simulated. We discuss nitrogen coordination influences electronic properties, adsorption energies, and catalytic activity in a single-atom Ru active site. The over potentials on Ru-N-C are 1.12 eV/1.00 eV for ORR/OER. We calculate Gibbs-free energy (ΔG) for every reaction step in ORR/OER process. In order to gain a deeper understanding of the catalytic process on the surface of single atom catalysts, the ab initio molecular dynamics (AIMD) simulations show that Ru-N-C has a structural stability at 300 K and that ORR/OER on Ru-N-C can occur along a typical four-electron process of reaction. AIMD simulations of catalytic processes provide detailed information about atom interactions.

METHODS

In this paper, we use density functional theory (DFT) with PBE functional to study the electronic properties and adsorption properties of graphene-supported nitrogen coordinated Ru-atom (Ru-N-C) Gibbs-free energy and Gibbs-free energy for very reaction step. The structural optimization and all the calculations are carried out by Dmol3 package, adopting the PNT basis set and DFT semicore pseudopotential. Ab initio molecular dynamics simulations (AIMD) were run for 10 ps. The canonical (NVT) ensemble, massive GGM thermostat, and a temperature of 300 K are taken into account. The functional of B3LYP and the DNP basis set are chosen for AIMD.

Modulating the Oxygen Reduction Reaction Performance via Precisely Tuned Reactive Sites in Porphyrin-Based Covalent Organic Frameworks

Covalent organic frameworks (COFs) have emerged as promising electrocatalysts due to their controllable architectures, highly exposed molecular active sites, and ordered structures. In this study, a series of porphyrin-based COFs (TAPP-x-COF) with various transition metals (Co, Ni, Fe) were synthesized via a facile post-metallization strategy under solvothermal synthesis. The resulting porphyrin-based COFs showed oxygen reduction reaction (ORR) activity with a trend in Co > Fe > Ni. Among them, TAPP-Co-COF exhibited the best ORR activity (E_1/2 = 0.66 V and jL = 4.82 mA cm^-2) in alkaline media, which is comparable to those of Pt/C under the same conditions. Furthermore, TAPP-Co-COF was employed as a cathode in a Zn-air battery, demonstrating a high power density of 103.73 mW cm^-2 and robust cycling stability. This work presents a simple method for using COFs as a smart platform to fabricate efficient electrocatalysts.

Regulating the Coordination Geometry and Oxidation State of Single-Atom Fe Sites for Enhanced Oxygen Reduction Electrocatalysis

FeNC catalysts demonstrate remarkable activity and stability for the oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cells and Zn-air batteries (ZABs). The local coordination of Fe single atoms in FeNC catalysts strongly impacts ORR activity. Herein, FeNC catalysts containing Fe single atoms sites with FeN₃ , FeN₄ , and FeN₅ coordinations are synthesized by carbonization of Fe-rich polypyrrole precursors. The FeN₅ sites possess a higher Fe oxidation state (+2.62) than the FeN₃ (+2.23) and FeN₄ (+2.47) sites, and higher ORR activity. Density functional theory calculations verify that the FeN₅ coordination optimizes the adsorption and desorption of ORR intermediates, dramatically lowering the energy barrier for OH^- desorption in the rate-limiting ORR step. A primary ZAB constructed using the FeNC catalyst with FeN₅ sites demonstrates state-of-the-art performance (an open circuit potential of 1.629 V, power density of 159 mW cm^-2 ). Results confirm an intimate structure-activity relationship between Fe coordination, Fe oxidation state, and ORR activity in FeNC catalysts.

Competitive Coordination-Oriented Monodispersed Cobalt Sites on a N-Rich Porous Carbon Microsphere Catalyst for High-Performance Zn-Air Batteries

Metal/nitrogen-doped carbon single-atom catalysts (M-N-C SACs) show excellent catalytic performance with a maximum atom utilization and customizable tunable electronic structure. However, precisely modulating the M-N_x coordination in M-N-C SACs remains a grand challenge. Here, we used a N-rich nucleobase coordination self-assembly strategy to precisely regulate the dispersion of metal atoms by controlling the metal ratio. Meanwhile, the elimination of Zn during pyrolysis produced porous carbon microspheres with a specific surface area of up to 1151 m² g^-1, allowing maximum exposure of Co-N₄ sites and facilitating charge transport in the oxygen reduction reaction (ORR) process. Thereby, the monodispersed cobalt sites (Co-N₄) in N-rich (18.49 at%) porous carbon microspheres (CoSA/N-PCMS) displayed excellent ORR activity under alkaline conditions. Simultaneously, the Zn-air battery (ZAB) assembled with CoSA/N-PCMS outperformed Pt/C+RuO₂-based ZABs in terms of power density and capacity, proving that they have good prospects for practical application.

Cobalt Nanoparticles Anchored on N-Doped Porous Carbon Derived from Yeast for Enhanced Electrocatalytic Oxygen Reduction Reaction

Biomass-derived carbon materials have received extensive attention for use in high-performance electrocatalysts. In this study, a highly efficient electrocatalyst is developed with Co nanoparticles anchored on N-doped porous carbon material (CoNC) by using yeast as a biomass precursor through a facial activation and pyrolysis process. CoNC exhibits comparable catalytic activity with commercial 20 % Pt/C for the oxygen reduction reaction (ORR) with a half-wave potential of 0.854 V. A home-made primary Zn-air battery exhibited an open circuit potential of 1.45 V and a peak power density of 188 mW cm^-2 . Moreover, the discharge voltage of the primary battery maintained at a stable value up to 9 days. The enhanced performance of CoNC was probably ascribed to its high content of pyridinic-N and graphitic-N species, extra Co loading and porous structure, which provided sufficient active sites and channels to promote mass/electron transfer for ORR. This work provides a promising strategy to develop an efficient non-noble metal carbon-based electrocatalyst for fuel cells and metal-air batteries.

Atomic Fe/Zn anchored N, S co-doped nano-porous carbon for boosting oxygen reduction reaction

Dual-single-atom catalysts are well-known due to their excellent catalytic performance of oxygen reduction reaction (ORR) and the tunable coordination environment of the active sites. However, it is still challengable to finely modulate the electronic states of the metal atoms and facilely fabricate a catalyst with dual-single atoms homogeneously dispersed on conductive skeletons with good mass transport. Herein, atomic FeN_x/ZnN_x sites anchored N, S co-doped nano-porous carbon plates/nanotubes material (Fe_0.10ZnNSC) is rationally prepared via a facile room-temperature reaction and high-temperature pyrolysis. The as-prepared Fe_0.10ZnNSC catalyst exhibits a positive onset potential of 0.956 V, an impressive half-wave potential of 0.875 V, excellent long-term durability, and a high methanol resistance, outperforming the benchmark Pt/C. The outstanding ORR performance of Fe_0.10ZnNSC is due to its unique nanoarchitecture: a large specific surface area (1092.8 cm² g^-1) and well-developed nanopore structure ensure the high accessibility of active sites; the high conductivity of the carbon matrix guarantees a strong ability to transport electrons to the active sites; and the optimized electronic states of FeN_x and ZnN_x sites possess good oxygen intermediate adsorption/desorption capacity. This strategy can be extended to design and fabricate other non-precious dual-single-atom ORR catalysts.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

Iron Single Atoms-Assisted Cobalt Nitride Nanoparticles to Strengthen the Cycle Life of Rechargeable Zn-Air Battery

The development of nonprecious metal catalysts with both oxygen reduction and evolution reactions (ORR/OER) is very important for Zn-air batteries (ZABs). Herein, a Co_5.47 N particles and Fe single atoms co-doped hollow carbon nanofiber self-supporting membrane (H-CoFe@NCNF) is synthesized by a coaxial electrospinning strategy combined with pyrolysis. X-ray absorption fine spectroscopy analyses confirm the state of the cobalt nitride and Fe single atoms. As a result, H-CoFe@NCNF exhibits a superior bifunctional performance of E_onset  = 0.96 V for ORR, and E_{j = 10} = 1.68 V for OER. Density functional theory calculations show that H-CoFe@NCNF has a moderate binding strength to oxygen due to the coexistence of nanoparticle and single atoms. Meanwhile, the Co site is more favorable to the OER, while the Fe site facilitates the ORR, and the proton and charge transfer between N and metal atoms further lower the reaction barriers. The liquid ZAB composed of H-CoFe@NCNF has a charge-discharge performance of ≈1100 h and a peak power density of 205 mW cm^-2 . The quasi-solid-state ZAB assembled by the self-supporting membrane of H-CoFe@NCNF is proven to operate stably in any bending condition.