Versatile Multi-Wavelength Light-Responsive Metal-Organic Frameworks Micromotor through Porphyrin Metalation for Water Sterilization

Revolutionizing Tetracycline Hydrochloride Remediation: 3D Motile Light-Driven MOFs Based Micromotors in Harsh Saline Environments

Traditional light-driven metal-organic-frameworks (MOFs)-based micromotors (MOFtors) are typically constrained to two-dimensional (2D) motion under ultraviolet or near-infrared light and often demonstrate instability and susceptibility to ions in high-saline environments. This limitation is particularly relevant to employing micromotors in water purification, as real wastewater is frequently coupled with high salinity. In response to these challenges, ultrastable MOFtors capable of three-dimensional (3D) motion under a broad spectrum of light through thermophoresis and electrophoresis are successfully synthesized. The MOFtors integrated photocatalytic porphyrin MOFs (PCN-224) with a photothermal component made of polypyrrole (PPy) by three distinct methodologies, resulting in micromotors with different motion behavior and catalytic performance. Impressively, the optimized MOFtors display exceptional maximum velocity of 1305 ± 327 µm s-1 under blue light and 2357 ± 453 µm s-1 under UV light. In harsh saline environments, these MOFtors are not only maintain high motility but also exhibit superior tetracycline hydrochloride (TCH) removal efficiency of 3578 ± 510 mg g-1, coupling with sulfate radical-based advanced oxidation processes and peroxymonosulfate. This research underscores the significant potential of highly efficient MOFtors with robust photocatalytic activity in effectively removing TCH in challenging saline conditions, representing a substantial advancement in applying MOFtors within real-world water treatment technologies.

Integrated Photoelectrochemical-SERS Platform Based on Plasmonic Metal-Semiconductor Heterostructures for Multidimensional Charge Transfer Analysis and Enhanced Patulin Detection

Comprehending the charge transfer mechanism at the semiconductor interfaces is crucial for enhancing the electronic and optical performance of sensing devices. Yet, relying solely on single signal acquisition methods at the interface hinders a comprehensive understanding of the charge transfer under optical excitation. Herein, we present an integrated photoelectrochemical surface-enhanced Raman spectroscopy (PEC-SERS) platform based on quantum dots/metal-organic framework (CdTe/Yb-TCPP) nanocomposites for investigating the charge transfer mechanism under photoexcitation in multiple dimensions. This integrated platform allows simultaneous PEC and SERS measurements with a 532 nm laser. The obtained photocurrent and Raman spectra of the CdTe/Yb-TCPP nanocomposites are simultaneously influenced by variable bias voltages, and the correlation between them enables us to predict the charge transfer pathway. Moreover, we integrate gold nanorods (Au NRs) into the PEC-SERS system by using magnetic separation and DNA biometrics to construct a biosensor for patulin detection. This biosensor demonstrates the voltage-driven ON/OFF switching of PEC and SERS signals, a phenomenon attributed to the plasmon resonance effect of Au NRs at different voltages, thereby influencing charge transfer. The detection of patulin in apples verified the applicability of the biosensor. The study offers an efficient approach to understanding semiconductor-metal interfaces and presents a new avenue for designing high-performance biosensors.

Antibacterial PVDF Coral-Like Hierarchical Structure Composite Film Fabrication for Self-Cleaning and Radiative Cooling Effect

Passive radiative cooling (PRC) is a zero-energy-consumption technology that reflects sunlight and radiates heat to cold outer space. In this work, a porous poly(vinylidene fluoride)-poly(methyl methacrylate) (PVDF-PMMA) composite film is fabricated by decorating zinc-imidazolate metal-organic framework (MOF) (ZIF-8) particles obtained by phase inversion. Due to the competent scattering via the coral-like hierarchical structures and the vibration excitations of specific functional groups, the prepared film exhibits good solar reflectance (92.6%) and intermediate infrared emittance (99.1%), with an average sub-ambient cooling of 10.4 °C under a solar radiation intensity of 0.6 AM1.5. Additionally, poly(vinylidene fluoride) has a low surface energy, while the ZIF-8 particles and coral-like hierarchical structures enhance the surface roughness, endowing the surface with significant superhydrophobicity characterized by a water contact angle (WCA) of 157.5° and a sliding angle (SA) of 2°. These films exhibit excellent antibacterial properties. When the content of ZIF-8 particles in the film is 300 mg·L-1, the antibacterial rate reaches 100% after 1 h of treatment. Thus, the ZIF-8 porous poly(vinylidene fluoride)-poly(methyl methacrylate) composite (ZPPP) film has potential application prospects in areas with high health and environmental requirements, such as cold chain transportation and public spaces.

Bimetallic Porphyrin-Based Metal-Organic Framework as a Superior Photocatalyst for Enhanced Photocatalytic Hydrogen Production

The meaningful and rational engineering of porphyrin-based catalysts with multimetallic active sites is very attractive toward photocatalytic hydrogen generation from water decomposition. Herein, three metal organic frameworks (MOFs) based on meso-tetrakis(4-carboxylphenyl)porphyrin (TCPP) were successfully constructed under solvothermal conditions. As a novel architectured photocatalyst (triclinic, C48H29N4O10PdYb), Pd/Yb-PMOF manifested diverse metal active sites, suitable bandgap positions, prominent visible light-collecting capacity, excellent carrier transfer efficiency, and obvious synergistic effect between ytterbium and palladium ions. Consequently, such a bimetallic MOF exhibited strengthened photocatalytic hydrogen evolution performance. Concretely, its hydrogen generation efficiency was up to 3196.42 μmol g-1 h-1 with 2 wt % Pt as a cocatalyst under visible light illumination. Our work demonstrates a promising strategy for highly efficient visible-light catalysts based on bimetallic-trimmed porphyrin MOFs.

3D Motion Manipulation for Micro- and Nanomachines: Progress and Future Directions

In the past decade, micro- and nanomachines (MNMs) have made outstanding achievements in the fields of targeted drug delivery, tumor therapy, microsurgery, biological detection, and environmental monitoring and remediation. Researchers have made significant efforts to accelerate the rapid development of MNMs capable of moving through fluids by means of different energy sources (chemical reactions, ultrasound, light, electricity, magnetism, heat, or their combinations). However, the motion of MNMs is primarily investigated in confined two-dimensional (2D) horizontal setups. Furthermore, three-dimensional (3D) motion control remains challenging, especially for vertical movement and control, significantly limiting its potential applications in cargo transportation, environmental remediation, and biotherapy. Hence, an urgent need is to develop MNMs that can overcome self-gravity and controllably move in 3D spaces. This review delves into the latest progress made in MNMs with 3D motion capabilities under different manipulation approaches, discusses the underlying motion mechanisms, explores potential design concepts inspired by nature for controllable 3D motion in MNMs, and presents the available 3D observation and tracking systems.

Nano/Micromotors for Cancer Diagnosis and Therapy: Innovative Designs to Improve Biocompatibility

Nano/micromotors are artificial robots at the nano/microscale that are capable of transforming energy into mechanical movement. In cancer diagnosis or therapy, such "tiny robots" show great promise for targeted drug delivery, cell removal/killing, and even related biomarker sensing. Yet biocompatibility is still the most critical challenge that restricts such techniques from transitioning from the laboratory to clinical applications. In this review, we emphasize the biocompatibility aspect of nano/micromotors to show the great efforts made by researchers to promote their clinical application, mainly including non-toxic fuel propulsion (inorganic catalysts, enzyme, etc.), bio-hybrid designs, ultrasound propulsion, light-triggered propulsion, magnetic propulsion, dual propulsion, and, in particular, the cooperative swarm-based strategy for increasing therapeutic effects. Future challenges in translating nano/micromotors into real applications and the potential directions for increasing biocompatibility are also described.