Microvascular permeability of albumin, vascular surface area, and vascular volume measured in human adenocarcinoma LS174T using dorsal chamber in SCID mice

Spatiotemporal modeling of nano-delivered chemotherapeutics for synergistic microwave ablation cancer therapy

BACKGROUND AND OBJECTIVE

The effectiveness of current microwave ablation (MWA) therapies is limited. Administration of thermosensitive liposomes (TSLs) which release drugs in response to heat has presented a significant potential for enhancing the efficacy of thermal ablation treatment, and the benefits of targeted drug delivery. However, a complete knowledge of the mechanobiological processes underlying the drug release process, especially the intravascular drug release mechanism and its distribution in response to MWA needs to be improved. Multiscale computational-based modeling frameworks, integrating different biophysical phenomena, have recently emerged as promising tools to decipher the mechanobiological events in combo therapies. The present study aims to develop a novel multiscale computational model of TSLs delivery following MWA implantation.

METHODS

Due to the complex interplay between the heating procedure and the drug concentration maps, a computational model is developed to determine the intravascular release of doxorubicin from TSL, its transvascular transport into the interstitium, transport in the interstitium, and cell uptake. Computational models can estimate the interplays among liposome and drug properties, tumor perfusion, and heating regimen to examine the impact of essential parameters and to optimize a targeted drug delivery platform.

RESULTS

Results indicated that the synergy of TSLs with MWA allows more localized drug delivery with lower side effects. The drug release rate and tumor permeability play crucial roles in the efficacy of TSLs during MWA treatment. The computational model predicted an unencapsulated drug lime around the ablated zone, which can destroy more cancer cells compared to MWA alone by 40%. Administration of TSLs with a high release rate capacity can improve the percentage of killed cancer cells by 24%. Since the heating duration in MWA is less than 15 min, the presented combination therapy showed better performance for highly permeable tumors.

CONCLUSION

This study highlights the potential of the proposed computational framework to address complex and realistic scenarios in cancer treatment, which can serve as the future research foundation, including advancements in nanomedicine and optimizing the pair of TSL and MWA for both preclinical and clinical studies. The present model could be as a valuable tool for patient-specific calibration of essential parameters.

Controlled delivery of sildenafil by β-Cyclodextrin-decorated sulfur-doped carbon nanodots: a synergistic activation of ROS signaling in tumors overexpressing PDE-5

Fluorescent sulfur- and nitrogen-doped carbon nanodots (CDs) are zero-dimensional nanoparticles that mediate ROS production in cancer cells, displaying inherent anticancer properties. Thus, they have been proposed as nanotheranostic tools useful in image-guided cancer therapy. Here, we try to show that cancerous cells (high PDE-5 expression) receiving sildenafil delivered by CDs-based nanostructures promote positive reinforcement of PDE-5-mediated cell death via the overexpression of genes involved in the production of ROS. We explored the regioselective Huisgen cycloaddition between azide-β-cyclodextrin and CDs-alkyne to synthetize homogeneous nanostructures, named CDs-PEG4-β-Cdx, consisting of CDs functionalized at the surface with β-cyclodextrins capable of including high amount drugs such as sildenafil (>20 % w/w), and releasing them in a controlled manner. We investigated how CDs-PEG4-β-Cdx bearing sildenafil enter cells, enhancing ROS production and cell death specifically in cancer cells overexpressing PDE-5. These nanoplatforms go beyond the bounds of EPR-based nanomedicines in which carriers are conceived as inert vehicles of toxic drugs. Our findings enable the development of clever anticancer nanoplatforms that synergistically combine nanomedicines that perturb the mitochondrial electron transport chain (ROS production) with PDE-5 inhibitors which trigger oxidative stress specifically in cancer cells regardless of their location.

Recent advances in sensor-integrated brain-on-a-chip devices for real-time brain monitoring

Brain science has remained in the global spotlight as an important field of scientific and technological discovery. Numerous in vitro and in vivo animal studies have been performed to understand the pathological processes involved in brain diseases and develop strategies for their diagnosis and treatment. However, owing to species differences between animals and humans, several drugs have shown high rates of treatment failure in clinical settings, hindering the development of diagnostic and treatment modalities for brain diseases. In this scenario, microfluidic brain-on-a-chip (BOC) devices, which allow the direct use of human tissues for experiments, have emerged as novel tools for effectively avoiding species differences and performing screening for new drugs. Although microfluidic BOC technology has achieved significant progress in recent years, monitoring slight changes in neurochemicals, neurotransmitters, and environmental states in the brain has remained challenging owing to the brain's complex environment. Hence, the integration of BOC with new sensors that have high sensitivity and high selectivity is urgently required for the real-time dynamic monitoring of BOC parameters. As sensor-based technologies for BOC have not been summarized, here, we review the principle, fabrication process, and application-based classification of sensor-integrated BOC, and then summarize the opportunities and challenges for their development. Generally, sensor-integrated BOC enables real-time monitoring and dynamic analysis, accurately measuring minute changes in the brain and thus enabling the realization of in vivo brain analysis and drug development.

Building Blood Vessel Chips with Enhanced Physiological Relevance

Blood vessel chips are bioengineered microdevices, consisting of biomaterials, human cells, and microstructures, which recapitulate essential vascular structure and physiology and allow a well-controlled microenvironment and spatial-temporal readouts. Blood vessel chips afford promising opportunities to understand molecular and cellular mechanisms underlying a range of vascular diseases. The physiological relevance is key to these blood vessel chips that rely on bioinspired strategies and bioengineering approaches to translate vascular physiology into artificial units. Here, we discuss several critical aspects of vascular physiology, including morphology, material composition, mechanical properties, flow dynamics, and mass transport, which provide essential guidelines and a valuable source of bioinspiration for the rational design of blood vessel chips. We also review state-of-art blood vessel chips that exhibit important physiological features of the vessel and reveal crucial insights into the biological processes and disease pathogenesis, including rare diseases, with notable implications for drug screening and clinical trials. We envision that the advances in biomaterials, biofabrication, and stem cells improve the physiological relevance of blood vessel chips, which, along with the close collaborations between clinicians and bioengineers, enable their widespread utility.

Advanced techniques for performing photodynamic therapy in deep-seated tissues

Photodynamic therapy (PDT) is a promising localized cancer treatment modality. It has been used successfully to treat a range of dermatological conditions with comparable efficacy to conventional treatments. However, some drawbacks limit the clinical utility of PDT in treating deep-seated tumors. Notably, the penetration limitation of UV and visible light, commonly applied to activate photosensitizers, makes PDT incompetent in treating deep-seated tumors. Development in light delivery technologies, especially fiber optics, led to improved clinical strategies for accessing deep tissues for irradiation. However, PDT efficacy issues remained partly due to light penetration limitations. In this review, we first summarized the current PDT applications for deep-seated tumor treatment. Then, the most recent progress in advanced techniques to overcome the light penetration limitation in PDT, including using functional nanomaterials that can either self-illuminate or be activated by near-infrared (NIR) light and X-rays as transducers, and implantable light delivery devices were discussed. Finally, current challenges and future opportunities of these technologies were discussed, which we hope may inspire the development of more effective techniques to enhance PDT efficacy against deep-seated tumors.

Deciphering albumin-directed drug delivery by imaging

Albumin is the most abundant plasma protein, exhibits extended circulating half-life, and its properties have long been exploited for diagnostics and therapies. Many drugs intrinsically bind albumin or have been designed to do so, yet questions remain about true rate limiting factors that govern albumin-based transport and their pharmacological impacts, particularly in advanced solid cancers. Imaging techniques have been central to quantifying - at a molecular and single-cell level - the impact of mechanisms such as phagocytic immune cell signaling, FcRn-mediated recycling, oncogene-driven macropinocytosis, and albumin-drug interactions on spatial albumin deposition and related pharmacology. Macroscopic imaging of albumin-binding probes quantifies vessel structure, permeability, and supports efficiently targeted molecular imaging. Albumin-based imaging in patients and animal disease models thus offers a strategy to understand mechanisms, guide drug development and personalize treatments.

Overcoming differential tumor penetration of BRAF inhibitors using computationally guided combination therapy

BRAF-targeted kinase inhibitors (KIs) are used to treat malignancies including BRAF-mutant non-small cell lung cancer, colorectal cancer, anaplastic thyroid cancer, and, most prominently, melanoma. However, KI selection criteria in patients remain unclear, as are pharmacokinetic/pharmacodynamic (PK/PD) mechanisms that may limit context-dependent efficacy and differentiate related drugs. To address this issue, we imaged mouse models of BRAF-mutant cancers, fluorescent KI tracers, and unlabeled drug to calibrate in silico spatial PK/PD models. Results indicated that drug lipophilicity, plasma clearance, faster target dissociation, and, in particular, high albumin binding could limit dabrafenib action in visceral metastases compared to other KIs. This correlated with retrospective clinical observations. Computational modeling identified a timed strategy for combining dabrafenib and encorafenib to better sustain BRAF inhibition, which showed enhanced efficacy in mice. This study thus offers principles of spatial drug action that may help guide drug development, KI selection, and combination.

Two-Photon Fluorescence Microscopy and Applications in Angiogenesis and Related Molecular Events

The role of angiogenesis in health and disease have gained considerable momentum in recent years. Visualizing angiogenic patterns and associated events of surrounding vascular beds in response to therapeutic and laboratory-grade biomolecules have become a commonplace in regenerative medicine and the biosciences. To aid imaging investigations in angiogenesis, the two-photon excitation fluorescence microscopy (2PEF), or multiphoton fluorescence microscopy is increasingly utilized in scientific investigations. The 2PEF microscope confers several distinct imaging advantages over other fluorescence excitation microscopy techniques - for the observation of in-depth, three-dimensional vascularity in a variety of tissue formats, including fixed tissue specimens and in vivo vasculature in live specimens. Understanding morphological and subcellular changes that occur in cells and tissues during angiogenesis will provide insights to behavioral responses in diseased states, advance the engineering of physiologically-relevant tissue models and provide biochemical clues for the design of therapeutic strategies. We review the applicability and limitations of the 2PEF microscope on the biophysical and molecular-level signatures of angiogenesis in various tissue models. Imaging techniques and strategies for best practices in 2PEF microscopy will be reviewed.

Preclinical Quantification of Prostate Cancer-Associated Vascular Alterations in the Bone Microenvironment in vivo

INTRODUCTION

Prostate cancer has a special predilection to form bone metastases. Despite the known impact of the microvascular network on tumour growth and its dependence on the organ-specific microenvironment, the characteristics of the tumour vasculature in bone remain unknown.

METHODS

The cell lines LNCaP, DU145, and PC3 were implanted into the femurs of NSG mice to examine the microvascular properties of prostate cancer in bone. Tumour growth and the functional and morphological alterations of the microvasculature were analysed for 21 days in vivo using a transparent bone chamber and fluorescence microscopy.

RESULTS

Vascular density was significantly lower in tumour-bearing bone than in non-tumour-bearing bone, with a marked loss of small vessels. Accelerated blood flow velocity led to increased volumetric blood flow per vessel, but overall perfusion was not affected. All of the prostate cancer cell lines had similar vascular patterns, with more pronounced alterations in rapidly growing tumours. Despite minor differences between the prostate cancer cell lines associated with individual growth behaviours, the same overall pattern was observed and showed strong similarity to that of tumours growing in soft tissue.

DISCUSSION

The increase in blood flow velocity could be a specific characteristic of prostate cancer or the bone microenvironment.

Blood-Brain Barrier (BBB) Permeability and Transport Measurement In Vitro and In Vivo

Quantification of the blood-brain barrier (BBB) permeability and transport in brain tissue is crucial in understanding brain disorders and developing systemic and non-systemic drug delivery strategies to the brain. This chapter summarizes BBB permeability measurement in vitro (Part I) and the in vivo non-invasive methods for quantifying the BBB permeability to solutes and brain tissue transport in rat brain by employing intravital multiphoton microscopy and a curving fitting method by using an unsteady mass transfer mathematical model (Part II).

Pneumatically Actuated Microfluidic Platform for Reconstituting 3D Vascular Tissue Compression

In vivo, blood vessels constitutively experience mechanical stresses exerted by adjacent tissues and other structural elements. Vascular collapse, a structural failure of vascular tissues, may stem from any number of possible compressive forces ranging from injury to tumor growth and can promote inflammation. In particular, endothelial cells are continuously exposed to varying mechanical stimuli, internally and externally, resulting in blood vessel deformation and injury. This study proposed a method to model biomechanical-stimuli-induced blood vessel compression in vitro within a polydimethylsiloxane (PDMS) microfluidic 3D microvascular tissue culture platform with an integrated pneumatically actuated compression mechanism. 3D microvascular tissues were cultured within the device. Histological reactions to compressive forces were quantified and shown to be the following: live/dead assays indicated the presence of a microvascular dead zone within high-stress regions and reactive oxygen species (ROS) quantification exhibited a stress-dependent increase. Fluorescein isothiocyanate (FITC)-dextran flow assays showed that compressed vessels developed structural failures and increased leakiness; finite element analysis (FEA) corroborated the experimental data, indicating that the suggested model of vascular tissue deformation and stress distribution was conceptually sound. As such, this study provides a powerful and accessible in vitro method of modeling microphysiological reactions of microvascular tissues to compressive stress, paving the way for further studies into vascular failure as a result of external stress.

Leaf-Inspired Authentically Complex Microvascular Networks for Deciphering Biological Transport Process

The vascular transport of molecules, cells, and nanoconstructs is a fundamental biophysical process impacting tissue regeneration, delivery of nutrients and therapeutic agents, and the response of the immune system to external pathogens. This process is often studied in single-channel microfluidic devices lacking the complex tridimensional organization of vascular networks. Here, soft lithography is employed to replicate the vein system of a Hedera elix leaf on a polydimethilsiloxane (PDMS) template. The replica is then sealed and connected to an external pumping system to realize an authentically complex microvascular network. This satisfies energy minimization criteria by Murray's law and comprises a network of channels ranging in size from capillaries (∼50 μm) to large arterioles and venules (∼400 μm). Micro-PIV (micro-particle image velocimetry) analysis is employed to characterize flow conditions in terms of streamlines, fluid velocity, and flow rates. To demonstrate the ability to reproduce physiologically relevant transport processes, two different applications are demonstrated: vascular deposition of tumor cells and lysis of blood clots. To this end, conditions are identified to culture cells within the microvasculature and realize a confluent endothelial monolayer. Then, the vascular deposition of circulating breast (MDA-MB 231) cancer cells is documented throughout the network under physiologically relevant flow conditions. Firm cell adhesion mostly occurs in channels with low mean blood velocity. As a second application, blood clots are formed within the chip by mixing whole blood with a thrombin solution. After demonstrating the blood clot stability, tissue plasminogen activator (tPA) and tPA-carrying nanoconstructs (tPA-DPNs) are employed as thrombolytics. In agreement with previous data, clot dissolution is equally induced by tPA and tPA-DPNs. The proposed leaf-inspired chip can be efficiently used to study a variety of vascular transport processes in complex microvascular networks, where geometry and flow conditions can be modulated and monitored throughout the experimental campaign.

Microfabricated blood vessels for modeling the vascular transport barrier

The vascular endothelium forms the inner lining of blood vessels and actively regulates vascular permeability in response to chemical and physical stimuli. Understanding the molecular pathways and mechanisms that regulate the permeability of blood vessels is of critical importance for developing therapies for cardiovascular dysfunction and disease. Recently, we developed a novel microfluidic human engineered microvessel (hEMV) platform to enable controlled blood flow through a human endothelial lumen within a physiologic 3D extracellular matrix (ECM) into which pericytes and other stromal cells can be introduced to recapitulate tissue-specific microvascular physiology. This protocol describes how to design and fabricate the silicon hEMV device master molds (takes ~1 week) and elastomeric substrates (takes 3 d); how to seed, culture, and apply calibrated fluid shear stress to hEMVs (takes 1-7 d); and how to assess vascular barrier function (takes 1 d) and perform immunofluorescence imaging (takes 3 d).

The bone microenvironment promotes tumor growth and tissue perfusion compared with striated muscle in a preclinical model of prostate cancer in vivo

Background

Prostate cancer-related morbidity is associated with its preferential spread to the bone. Although the molecular interactions between the bone microenvironment and cancer cells have been researched extensively, the relevance of the microvascular properties of prostate cancer bone metastases remains largely unknown. Most preclinical studies focusing on microvascular analyses are based on heterotopic tumor implantation, whereas the impact of the microenvironment on site-specific growth behavior and angiogenesis is rarely addressed.

Methods

The microvascular changes associated with tumor growth in bone and soft tissue were characterized by implanting single cell suspensions of LnCap, Du145, and Pc3 cells into the femur (femur window) or striated muscle (dorsal skinfold chamber) of NSG mice. Tumor growth and the local microvasculature were analyzed for 21 days using intravital fluorescence microscopy.

Results

The results showed a higher engraftment of tumor cells in bone than in striated muscle associated with accelerated growth of LnCap cells and Pc3 cells. Permeability, blood flow, and tissue perfusion rates were greater in bone than in striated muscle. Du145 cells showed similar growth behavior in both tissues with similar vascular properties. The bone microenvironment facilitated tumor engraftment and growth. Increased microvascular density in striated muscle led to a higher tumor burden during early growth, whereas the increased perfusion promoted later prostate cancer growth in bone.

Conclusions

Monitoring prostate cancer microcirculation in bone and soft tissue may be useful to evaluate the organ-specific efficacy of new treatments.

Electronic supplementary material

The online version of this article (10.1186/s12885-018-4905-5) contains supplementary material, which is available to authorized users.

Microvasculature-on-a-chip for the long-term study of endothelial barrier dysfunction and microvascular obstruction in disease

Alterations in the mechanical properties of erythrocytes occurring in inflammatory and hematologic disorders such as sickle cell disease (SCD) and malaria often lead to increased endothelial permeability, haemolysis, and microvascular obstruction. However, the associations among these pathological phenomena remain unknown. Here, we report a perfusable, endothelialized microvasculature-on-a-chip featuring an interpenetrating-polymer-network hydrogel that recapitulates the stiffness of blood-vessel intima, basement membrane self-deposition and self-healing endothelial barrier function for longer than 1 month. The microsystem enables the real-time visualization, with high spatiotemporal resolution, of microvascular obstruction and endothelial permeability under physiological flow conditions. We found how extracellular heme, a hemolytic byproduct, induces delayed but reversible endothelial permeability in a dose-dependent manner, and demonstrate that endothelial interactions with SCD or malaria-infected erythrocytes cause reversible microchannel occlusion and increased in situ endothelial permeability. The microvasculature-on-a-chip enables mechanistic insight into the endothelial barrier dysfunction associated with SCD, malaria and other inflammatory and haematological diseases.

Intravital microscopy in the study of the tumor microenvironment: from bench to human application

Intravital microscopy (IVM) is a dynamic imaging modality that allows for the real time observation of biologic processes in vivo, including angiogenesis and immune cell interactions. In the setting of preclinical cancer models, IVM has facilitated an understanding of the tumor associated vasculature and the role of effector immune cells in the tumor microenvironment. Novel approaches to apply IVM to human malignancies have thus far focused on cancer diagnosis and tumor vessel characterization, but have the potential to provide advances in the field of personalized medicine by identifying individual patients who may respond to systemically delivered chemotherapeutic drugs or immunotherapeutic agents. In this review, we highlight the role that IVM has had in investigating tumor vasculature and the tumor microenvironment in preclinical studies and discuss its current and future applications to directly observe human tumors.

Investigating Low-Velocity Fluid Flow in Tumors with Convection-MRI

Several distinct fluid flow phenomena occur in solid tumors, including intravascular blood flow and interstitial convection. Interstitial fluid pressure is often raised in solid tumors, which can limit drug delivery. To probe low-velocity flow in tumors resulting from raised interstitial fluid pressure, we developed a novel MRI technique named convection-MRI, which uses a phase-contrast acquisition with a dual-inversion vascular nulling preparation to separate intra- and extravascular flow. Here, we report the results of experiments in flow phantoms, numerical simulations, and tumor xenograft models to investigate the technical feasibility of convection-MRI. We observed a significant correlation between estimates of effective fluid pressure from convection-MRI with gold-standard, invasive measurements of interstitial fluid pressure in mouse models of human colorectal carcinoma. Our results show how convection-MRI can provide insights into the growth and responsiveness to vascular-targeting therapy in colorectal cancers.Significance: A noninvasive method for measuring low-velocity fluid flow caused by raised fluid pressure can be used to assess changes caused by therapy. Cancer Res; 78(7); 1859-72. ©2018 AACR.

A Unified Mathematical Model for Nano-Liposomal Drug Delivery to Solid Tumors

Nanoparticles, such as liposomes, allow more targeted drug delivery for improved efficacy and/or reduced toxicity in both passive (e.g., Doxil) or active [e.g., thermo-sensitive liposomes (TSL)] release forms compared with unencapsulated drugs (i.e., conventional chemotherapy). Optimization and evaluation of these different drug delivery systems are experimentally challenging because of varying tissue parameters as well as limited avaiability of experimental data. Here, we present a novel unified mathematical model that can simulate various liposomal drug delivery systems and unencapsulated drugs with a single set of equations. We use this model to evaluate the chemotherapy performance of free Doxorubicin (as drug), as well as various liposomal drug delivery systems: 1) passive liposomes (Doxil) and 2) active-triggered TSL with either intravascular (TSLi) or extravascular (TSLe)-triggered release. Furthermore, we implemented a more accurate expression to consider incomplete liposomal drug release. The proposed model matches experimental in vivo results in terms of maximum drug concentration in tumor. The simulations predict better overall performance for all liposomal delivery systems than free Dox. TSLe is shown to be more efficient for less permeable and perfused tumors than other systems. The optimal release rate is lower for TSLe and Doxil than TSLi. The performance of free DOX changes a little for varying tumor characteristics such as perfusion and permeability.

Microfluidic modeling of the biophysical microenvironment in tumor cell invasion

Tumor cell invasion, whether penetrating through the extracellular matrix (ECM) or crossing a vascular endothelium, is a critical step in the cancer metastatic cascade. Along the way from a primary tumor to a distant metastatic site, tumor cells interact actively with the microenvironment either via biomechanical (e. g. ECM stiffness) or biochemical (e.g. secreted cytokines) signals. Increasingly, it is recognized that the tumor microenvironment (TME) is a critical player in tumor cell invasion. A main challenge for the mechanistic understanding of tumor cell-TME interactions comes from the complexity of the TME, which consists of extracellular matrices, fluid flows, cytokine gradients and other cell types. It is difficult to control TME parameters in conventional in vitro experimental designs such as Boyden chambers or in vivo such as in mouse models. Microfluidics has emerged as an enabling tool for exploring the TME parameter space because of its ease of use in recreating a complex and physiologically realistic three dimensional TME with well-defined spatial and temporal control. In this perspective, we will discuss designing principles for modeling the biophysical microenvironment (biological flows and ECM) for tumor cells using microfluidic devices and the potential microfluidic technology holds in recreating a physiologically realistic tumor microenvironment. The focus will be on applications of microfluidic models in tumor cell invasion.

In vivo functional and morphological characterization of bone and striated muscle microcirculation in NSG mice

Organ-specific microcirculation plays a central role in tumor growth, tumor cell homing, tissue engineering, and wound healing. Mouse models are widely used to study these processes; however, these mouse strains often possess unique microhemodynamic parameters, making it difficult to directly compare experiments. The full functional characterization of bone and striated muscle microcirculatory parameters in non-obese diabetic-severe combined immunodeficiency/y-chain; NOD-Prkds IL2rg (NSG) mice has not yet been reported. Here, we established either a dorsal skinfold chamber or femur window in NSG mice (n = 23), allowing direct analysis of microcirculatory parameters in vivo by intravital fluorescence microscopy at 7, 14, 21, and 28 days after chamber preparation. Organ-specific differences were observed. Bone had a significantly lower vessel density but a higher vessel diameter than striated muscle. Bone also showed higher effective vascular permeability than striated muscle. The centerline velocity values were similar in the femur window and dorsal skinfold chamber, with a higher volumetric blood flow in bone. Interestingly, bone and striated muscle showed similar tissue perfusion rates. Knowledge of physiological microhemodynamic values of bone and striated muscle in NSG mice makes it possible to analyze pathophysiological processes at these anatomic sites, such as tumor growth, tumor metastasis, and tumor microcirculation, as well as the response to therapeutic agents.

Strategies for optimizing the delivery to tumors of macrocyclic photosensitizers used in photodynamic therapy (PDT)

This review briefly summaries the principles and mechanisms of action of photodynamic therapy (PDT) as concerns its application in the oncological field, highlighting its drawbacks and some of the strategies that have been or are being explored to overcome them. The major aim is to increase the efficiency and selectivity of the photosensitizer (PS) uptake in the cancer cells for optimizing the PDT effects on tumors while sparing normal cells. Some attempts to achieve this are based on the conjugation of the PS to biomolecules (small ligands, peptides) functioning as carriers with the ability to efficiently penetrate cells and/or specifically recognize and bind proteins/receptors overexpressed on the surface of cancer cells. Alternatively, the PS can be entrapped in nanocarriers derived from various types of materials that can target the tumor by exploiting the enhanced permeability and retention (EPR) effects. The use of nanocarriers is particularly attractive because it allows the simultaneous delivery of more than one drug with the possibility of combining PDT with other therapeutic modalities.

Endothelial Progenitor Cells for the Vascularization of Engineered Tissues

Self-assembled microvasculature from cocultures of endothelial cells (ECs) and stromal cells has significantly advanced efforts to vascularize engineered tissues by enhancing perfusion rates in vivo and producing investigative platforms for microvascular morphogenesis in vitro. However, to clinically translate prevascularized constructs, the issue of EC source must be resolved. Endothelial progenitor cells (EPCs) can be noninvasively supplied from the recipient through adult peripheral and umbilical cord blood, as well as derived from induced pluripotent stem cells, alleviating antigenicity issues. EPCs can also differentiate into all tissue endothelium, and have demonstrated potential for therapeutic vascularization. Yet, EPCs are not the standard EC choice to vascularize tissue constructs in vitro. Possible reasons include unresolved issues with EPC identity and characterization, as well as uncertainty in the selection of coculture, scaffold, and culture media combinations that promote EPC microvessel formation. This review addresses these issues through a summary of EPC vascular biology and the effects of tissue engineering design parameters upon EPC microvessel formation. Also included are perspectives to integrate EPCs with emerging technologies to produce functional, organotypic vascularized tissues.

Microfluidic organ-on-chip technology for blood-brain barrier research

Organs-on-chips are a new class of microengineered laboratory models that combine several of the advantages of current in vivo and in vitro models. In this review, we summarize the advances that have been made in the development of organ-on-chip models of the blood-brain barrier (BBBs-on-chips) and the challenges that are still ahead. The BBB is formed by specialized e3ndothelial cells and separates blood from brain tissue. It protects the brain from harmful compounds from the blood and provides homeostasis for optimal neuronal function. Studying BBB function and dysfunction is important for drug development and biomedical research. Microfluidic BBBs-on-chips enable real-time study of (human) cells in an engineered physiological microenvironment, for example incorporating small geometries and fluid flow as well as sensors. Examples of BBBs-on-chips in literature already show the potential of more realistic microenvironments and the study of organ-level functions. A key challenge in the field of BBB-on-chip development is the current lack of standardized quantification of parameters such as barrier permeability and shear stress. This limits the potential for direct comparison of the performance of different BBB-on-chip models to each other and existing models. We give recommendations for further standardization in model characterization and conclude that the rapidly emerging field of BBB-on-chip models holds great promise for further studies in BBB biology and drug development.

Mast Cells Contribute to Radiation-Induced Vascular Hyperpermeability

Induction of vascular hyperpermeability is one of the early vascular responses to radiation exposure and is considered to contribute to subsequent fibrosis and tissue injuries. However, the mechanism underlying radiation-induced hyperpermeability has not yet been clearly elucidated. Here, we provide experimental evidence indicating that mast cells contribute to the increase in vascular permeability for albumin in normal mouse skin after irradiation. Vascular permeability in the skin of C3H mice increased after 2, 15 and 50 Gy irradiation, peaked at 24 h after irradiation and gradually decreased thereafter to the baseline level within 3-10 days. Both the extent and duration of hyperpermeability were dose dependent. We found significant degranulation of mast cells in the skin after 15 Gy irradiation. To further investigate the role of mast cells in the radiation-induced increase in vascular permeability, we measured vascular permeability in the skin of mast cell-deficient mice (WW(v)) and their wild-type littermates at 24 h after irradiation. Vascular permeability in WW(v) mice did not change, whereas that in wild-type mice significantly increased after irradiation. There were no appreciable changes in the total tissue levels of vascular endothelial growth factor or endothelial nitric oxide synthase after 15 Gy irradiation and there was no detectable expression of inducible nitric oxide synthase. Collectively, these results show that exposure to radiation induces vascular hyperpermeability in a dose-dependent manner and that mast cells contribute to this process.

Measuring Vascular Permeability In Vivo

Over the past decades, in vivo vascular permeability measurements have provided significant insight into vascular functions in physiological and pathophysiological conditions such as the response to pro- and anti-angiogenic signaling, abnormality of tumor vasculature and its normalization, and delivery and efficacy of therapeutic agents. Different approaches for vascular permeability measurements have been established. Here, we describe and discuss a conventional 2D imaging method to measure vascular permeability, which was originally documented by Gerlowski and Jain in 1986 (Microvasc Res 31:288-305, 1986) and further developed by Yuan et al. in the early 1990s (Microvasc Res 45:269-289, 1993; Cancer Res 54:352-3356, 1994), and our recently developed 3D imaging method, which advances the approach originally described by Brown et al. in 2001 (Nat Med 7:864-868, 2001).

Everolimus Improves Microcirculatory Derangements in Experimental Postischemic Pancreatitis Modulating the Expression of Vascular Endothelial Growth Factor, Interleukin 6, and Toll-Like Receptor 4

OBJECTIVES

Ischemia/reperfusion injury (IRI) of the pancreas is a serious complication following pancreatic transplantation and hemorrhagic shock. The present study was designed to investigate the influence of the potent mammalian target of rapamycin inhibitor everolimus interfering via microvascular permeability changing key proteins hypoxia-inducible factor (HIF) and vascular endothelial growth factor on pancreatic IRI-induced microvascular disturbances.

METHODS

Anesthetized male Sprague-Dawley rats were assigned to 3 groups (n = 7/group): (1) sham, (2) 60-minute ischemia/reperfusion of the pancreas (I/R), and (3) I/R and everolimus (10 mg/kg BW orally). Quantification of the effective microvascular permeability (P), functional capillary density (FCD), and leukocyte-endothelial cell interaction (LEI) was performed using digital and analog intravital epifluorescence microscopy. Serum-amylase, lipase, interleukin 6, and vascular endothelial growth factor concentration were quantified using enzyme-linked immunosorbent assay.

RESULTS

Sham compared with I/R (P: [×10 cm/s] 0.068 ± 0.079 vs 1.516 ± 0.314; FCD: [cm/cm] 357 ± 14 vs 258 ± 13; LEI: [cells/mm] 148 ± 25 vs 349 ± 75) demonstrates a significant increase in microcirculatory damage and all previously mentioned serum parameters. Except amylase, I/R + everolimus led to a statistically significant improvement of almost all increased parameters (P: 0.434 ± 0.296, FCD: 347 ± 16, LEI: 178 ± 30).

CONCLUSIONS

Everolimus attenuated experimental microvascular and inflammatory IRI of the pancreas. Therefore, these results may warrant further investigation of everolimus as a therapeutic agent following clinical states with pancreatic ischemia/reperfusion.

Modeling of microvascular permeability changes after electroporation

Vascular endothelium selectively controls the transport of plasma contents across the blood vessel wall. The principal objective of our preliminary study was to quantify the electroporation-induced increase in permeability of blood vessel wall for macromolecules, which do not normally extravasate from blood into skin interstitium in homeostatic conditions. Our study combines mathematical modeling (by employing pharmacokinetic and finite element modeling approach) with in vivo measurements (by intravital fluorescence microscopy). Extravasation of fluorescently labeled dextran molecules of two different sizes (70 kDa and 2000 kDa) following the application of electroporation pulses was investigated in order to simulate extravasation of therapeutic macromolecules with molecular weights comparable to molecular weight of particles such as antibodies and plasmid DNA. The increase in blood vessel permeability due to electroporation and corresponding transvascular transport was quantified by calculating the apparent diffusion coefficients for skin microvessel wall (D [μm2/s]) for both molecular sizes. The calculated apparent diffusion coefficients were D = 0.0086 μm2/s and D = 0.0045 μm2/s for 70 kDa and 2000 kDa dextran molecules, respectively. The results of our preliminary study have important implications in development of realistic mathematical models for prediction of extravasation and delivery of large therapeutic molecules to target tissues by means of electroporation.

Interstitial diffusion and the relationship between compartment modelling and multi-scale spatial-temporal modelling of (18)F-FLT tumour uptake dynamics

Tumour cell proliferation can be imaged via positron emission tomography of the radiotracer 3'-deoxy-3'-18F-fluorothymidine (18F-FLT). Conceptually, the number of proliferating cells might be expected to correlate more closely with the kinetics of 18F-FLT uptake than with uptake at a fixed time. Radiotracer uptake kinetics are standardly visualized using parametric maps of compartment model fits to time-activity-curves (TACs) of individual voxels. However the relationship between the underlying spatiotemporal accumulation of FLT and the kinetics described by compartment models has not yet been explored. In this work tumour tracer uptake is simulated using a mechanistic spatial-temporal model based on a convection-diffusion-reaction equation solved via the finite difference method. The model describes a chain of processes: the flow of FLT between the spatially heterogeneous tumour vasculature and interstitium; diffusion and convection of FLT within the interstitium; transport of FLT into cells; and intracellular phosphorylation. Using values of model parameters estimated from the biological literature, simulated FLT TACs are generated with shapes and magnitudes similar to those seen clinically. Results show that the kinetics of the spatial-temporal model can be recovered accurately by fitting a 3-tissue compartment model to FLT TACs simulated for those tumours or tumour sub-volumes that can be viewed as approximately closed, for which tracer diffusion throughout the interstitium makes only a small fractional change to the quantity of FLT they contain. For a single PET voxel of width 2.5-5 mm we show that this condition is roughly equivalent to requiring that the relative difference in tracer uptake between the voxel and its neighbours is much less than one.

Temporal effects of vascular endothelial growth factor and 3,5-cyclic monophosphate on blood-brain barrier solute permeability in vivo

To test the hypothesis that vascular endothelial growth factor (VEGF) can transiently increase the blood-brain barrier permeability, P, as for peripheral microvessels and that the elevation of 3,5-cyclic monophosphate (cAMP) levels can inhibit the VEGF-induced acute hyperpermeability, we employed multiphoton microscopy to quantify the cerebral microvessel permeability P to various-sized solutes under VEGF and cAMP treatments. The cerebral microcirculation was observed through a section of frontoparietal bone thinned with a microgrinder. Fluorescein (MW 376Da), fluorescein isothioyanate-dextran-20k (FITC-Dex-20k), FITC-Dex-70k, or Alexa Fluor 488-IgG in 1% bovine serum albumin mammalian Ringer's solution was injected into the cerebral circulation via the ipsilateral carotid artery with a syringe pump. Simultaneously, temporal images were collected from the brain parenchyma ∼100-200 μm below the pia mater. P was determined from the rate of tissue solute accumulation around individual microvessels. Exposure to 1 nM VEGF transiently increased P to 2.2, 10.5, 9.8, and 12.8 times control values, for fluorescein, Dex-20k, Dex-70k, and IgG, respectively, within 30 sec, and all returned to control levels within 2 min. After 20 min of pretreatment with 2 mM of the cAMP analog 8-bromo-cAMP, the initial increase by 1 nM VEGF was completely abolished in P of all solutes. The response pattern of P to VEGF and cAMP and the ratios of the peak to control values for rat cerebral microvessels are similar to those for rat mesenteric (peripheral) microvessels, except that the ratios are higher in P of cerebral microvessels for the intermediate and large solutes. These results imply a new approach for delivering large therapeutic agents to the brain.

Chlorin e6 derivative radachlorin mainly accumulates in mitochondria, lysosome and endoplasmic reticulum and shows high affinity toward tumors in nude mice in photodynamic therapy

The efficacy of photodynamic therapy (PDT) depends upon the amount of photosensitizer accumulated in the malignant tissues. Radachlorin is a popular photosensitizer used in photodynamic therapy to treat various types of cancer. In this study, we have studied the main organelles responsible for the accumulation of radachlorin in human anaplastic thyroid cancer in vitro and in vivo. The optimal time window for uptake and clearance of radachlorin also was studied. Confocal microscopic images confirmed that the radachlorin is mainly acquired by mitochondria and partially by lysosome and endoplasmic reticulum. Studies also showed that the maximum amount of radachlorin was accumulated within 3-6 h after the treatment. Radachlorin also showed a higher affinity toward malignant tumors compared to the other organs in mice xenograft model. Uptake of radachlorin reached an optimum amount within 6 h and most of the radachlorins were also cleared from the body in next 48 h. Therefore, detailed information regarding exact accumulation sites and a time window in which maximum amount of drug is accumulated and cleared were obtained by this study. Hence, not only the efficacy of the treatment can be increased but the phototoxicity after the treatment also can be controlled.

18F-FLT uptake kinetics in head and neck squamous cell carcinoma: a PET imaging study

PURPOSE

To analyze the kinetics of 3(')-deoxy-3(')-[F-18]-fluorothymidine (18F-FLT) uptake by head and neck squamous cell carcinomas and involved nodes imaged using positron emission tomography (PET).

METHODS

Two- and three-tissue compartment models were fitted to 12 tumor time-activity-curves (TACs) obtained for 6 structures (tumors or involved nodes) imaged in ten dynamic PET studies of 1 h duration, carried out for five patients. The ability of the models to describe the data was assessed using a runs test, the Akaike information criterion (AIC) and leave-one-out cross-validation. To generate parametric maps the models were also fitted to TACs of individual voxels. Correlations between maps of different parameters were characterized using Pearson'sr coefficient; in particular the phosphorylation rate-constants k3-2tiss and k5 of the two- and three-tissue models were studied alongside the flux parameters KFLT- 2tiss and KFLT of these models, and standardized uptake values (SUV). A methodology based on expectation-maximization clustering and the Bayesian information criterion ("EM-BIC clustering") was used to distil the information from noisy parametric images.

RESULTS

Fits of two-tissue models 2C3K and 2C4K and three-tissue models 3C5K and 3C6K comprising three, four, five, and six rate-constants, respectively, pass the runs test for 4, 8, 10, and 11 of 12 tumor TACs. The three-tissue models have lower AIC and cross-validation scores for nine of the 12 tumors. Overall the 3C6K model has the lowest AIC and cross-validation scores and its fitted parameter values are of the same orders of magnitude as literature estimates. Maps of KFLT and KFLT- 2tiss are strongly correlated (r = 0.85) and also correlate closely with SUV maps (r = 0.72 for KFLT- 2tiss, 0.64 for KFLT). Phosphorylation rate-constant maps are moderately correlated with flux maps (r = 0.48 for k3-2tiss vs KFLT- 2tiss and r = 0.68 for k5 vs KFLT); however, neither phosphorylation rate-constant correlates significantly with SUV. EM-BIC clustering reduces the parametric maps to a small number of levels--on average 5.8, 3.5, 3.4, and 1.4 for KFLT- 2tiss, KFLT, k3-2tiss, and k5. This large simplification is potentially useful for radiotherapy dose-painting, but demonstrates the high noise in some maps. Statistical simulations show that voxel level noise degrades TACs generated from the 3C6K model sufficiently that the average AIC score, parameter bias, and total uncertainty of 2C4K model fits are similar to those of 3C6K fits, whereas at the whole tumor level the scores are lower for 3C6K fits.

CONCLUSIONS

For the patients studied here, whole tumor FLT uptake time-courses are represented better overall by a three-tissue than by a two-tissue model. EM-BIC clustering simplifies noisy parametric maps, providing the best description of the underlying information they contain and is potentially useful for radiotherapy dose-painting. However, the clustering highlights the large degree of noise present in maps of the phosphorylation rate-constantsk5 and k3-2tiss, which are conceptually tightly linked to cellular proliferation. Methods must be found to make these maps more robust-either by constraining other model parameters or modifying dynamic imaging protocols.

Multiscale tumor spatiokinetic model for intraperitoneal therapy

This study established a multiscale computational model for intraperitoneal (IP) chemotherapy, to depict the time-dependent and spatial-dependent drug concentrations in peritoneal tumors as functions of drug properties (size, binding, diffusivity, permeability), transport mechanisms (diffusion, convection), spatial-dependent tumor heterogeneities (vessel density, cell density, pressure gradient), and physiological properties (peritoneal pressure, peritoneal fluid volume). Equations linked drug transport and clearance on three scales (tumor, IP cavity, whole organism). Paclitaxel was the test compound. The required model parameters (tumor diffusivity, tumor hydraulic conductivity, vessel permeability and surface area, microvascular hydrostatic pressure, drug association with cells) were obtained from literature reports, calculation, and/or experimental measurements. Drug concentration-time profiles in peritoneal fluid and plasma were the boundary conditions for tumor domain and blood vessels, respectively. The finite element method was used to numerically solve the nonlinear partial differential equations for fluid and solute transport. The resulting multiscale model accounted for intratumoral spatial heterogeneity, depicted diffusive and convective drug transport in tumor interstitium and across blood vessels, and provided drug flux and concentration as a function of time and spatial position in the tumor. Comparison of model-predicted tumor spatiokinetics with experimental results (autoradiographic data of 3H-paclitaxel in IP ovarian tumors in mice, 6 h posttreatment) showed good agreement (1% deviation for area under curve and 23% deviations for individual data points, which were several-fold lower compared to the experimental intertumor variations). The computational multiscale model provides a tool to quantify the effects of drug-, tumor-, and host-dependent variables on the concentrations and residence time of IP therapeutics in tumors.

A bioengineered array of 3D microvessels for vascular permeability assay

Blood vessels exhibit highly regulated barrier function allowing selective passage of macromolecules. Abnormal vascular permeability caused by disorder in barrier function is often associated with various pathological states such as tumor progression or pulmonary fibrosis. There are no realistic in vitro models for measuring vascular permeability as most models are limited to mimicking anatomical structural properties of in vivo vessel barriers. This paper presents a reliable microfluidic-based chip for measuring permeability by engineering tubular perfusable microvessels. This platform is compatible with high resolution, live-cell time-lapse imaging and high throughput permeability measurements. The microvessels were formed by natural angiogenic process and thus exhibit reliable barrier properties with permeability coefficient of 1.55×10(-6)cm/s (for 70kDa FITC-dextran). The bioengineered microvessels showed properties similar to in vivo vessels in terms of cell-cell junction expression (ZO-1, Claudin-5 and VE-cadherin) and response to agonists such as histamine and TNF-α. We showed that hyperpermeability of the tumor microvessel could be normalized with anti-VEGF (bevacizumab) treatment, consistent with the mechanism of action for bevacizumab. The method developed here provides a relatively simple, robust technique for assessing drug effects on permeability of microvessels with a number of potential applications in fundamental vascular biology as well as drug screening.

Static magnetic fields increase tumor microvessel leakiness and improve antitumoral efficacy in combination with paclitaxel

Static magnetic fields (SMF) induce an intratumoral edema possibly by increasing microvessel permeability. The aim of this study was to evaluate the effects of SMF on tumor microvessel permeability and on treatment effects of conventional cytotoxic chemotherapy. Using intravital microscopy in skinfold chamber preparations in A-Mel-3-tumor-bearing hamsters, functional tumor microcirculation, microvessel permeability and leukocyte-endothelial cell interactions were measured under SMF-exposure (587 mT). Combining SMF-exposure with paclitaxel-chemotherapy, tumor growth was analyzed. SMF inhibited tumor angiogenesis and increased tumor microvessel permeability significantly. This was not mediated by inflammatory leukocyte-endothelial cell interactions. Further, SMF increased the effectiveness of paclitaxel-chemotherapy significantly. These findings support that SMF possibly open the blood-tumor-barrier to small molecular therapeutics.

Modeling of nanotherapeutics delivery based on tumor perfusion

Heterogeneities in the perfusion of solid tumors prevent optimal delivery of nanotherapeutics. Clinical imaging protocols to obtain patient-specific data have proven difficult to implement. It is challenging to determine which perfusion features hold greater prognostic value and to relate measurements to vessel structure and function. With the advent of systemically administered nanotherapeutics, whose delivery is dependent on overcoming diffusive and convective barriers to transport, such knowledge is increasingly important. We describe a framework for the automated evaluation of vascular perfusion curves measured at the single vessel level. Primary tumor fragments, collected from triple-negative breast cancer patients and grown as xenografts in mice, were injected with fluorescence contrast and monitored using intravital microscopy. The time to arterial peak and venous delay, two features whose probability distributions were measured directly from time-series curves, were analyzed using a Fuzzy C-mean (FCM) supervised classifier in order to rank individual tumors according to their perfusion characteristics. The resulting rankings correlated inversely with experimental nanoparticle accumulation measurements, enabling modeling of nanotherapeutics delivery without requiring any underlying assumptions about tissue structure or function, or heterogeneities contained within. With additional calibration, these methodologies may enable the study of nanotherapeutics delivery strategies in a variety of tumor models.

Coupled finite difference and boundary element methods for fluid flow through a vessel with multibranches in tumours

A mathematical model and a numerical solution procedure are developed to simulate flow field through a 3D permeable vessel with multibranches embedded in a solid tumour. The model is based on Poisseuille's law for the description of the flow through the vessels, Darcy's law for the fluid field inside the tumour interstitium, and Starling's law for the flux transmitted across the vascular walls. The solution procedure is based on a coupled method, in which the finite difference method is used for the flow in the vessels and the boundary element method is used for the flow in the tumour. When vessels meet each other at a junction, the pressure continuity and mass conservation are imposed at the junction. Three typical representative structures within the tumour vasculature, symmetrical dichotomous branching, asymmetrical bifurcation with uneven radius of daughter vessels and trifurcation, are investigated in detail as case studies. These results have demonstrated the features of tumour flow environment by the pressure distributions and flow velocity field.

Advance in photosensitizers and light delivery for photodynamic therapy

The brief history of photodynamic therapy (PDT) research has been focused on photosensitizers (PSs) and light delivery was introduced recently. The appropriate PSs were developed from the first generation PS Photofrin (QLT) to the second (chlorins or bacteriochlorins derivatives) and third (conjugated PSs on carrier) generations PSs to overcome undesired disadvantages, and to increase selective tumor accumulation and excellent targeting. For the synthesis of new chlorin PSs chlorophyll a is isolated from natural plants or algae, and converted to methyl pheophorbide a (MPa) as an important starting material for further synthesis. MPa has various active functional groups easily modified for the preparation of different kinds of PSs, such as methyl pyropheophorbide a, purpurin-18, purpurinimide, and chlorin e6 derivatives. Combination therapy, such as chemotherapy and photothermal therapy with PDT, is shortly described here. Advanced light delivery system is shown to establish successful clinical applications of PDT. Phtodynamic efficiency of the PSs with light delivery was investigated in vitro and/or in vivo.

Delivery of molecular and cellular medicine to solid tumors

To reach cancer cells in a tumor, a blood-borne therapeutic molecule or cell must make its way into the blood vessels of the tumor and across the vessel wall into the interstitium, and finally migrate through the interstitium. Unfortunately, tumors often develop in ways that hinder each of these steps. Our research goals are to analyze each of these steps experimentally and theoretically, and then integrate the resulting information in a unified theoretical framework. This paradigm of analysis and synthesis has allowed us to obtain a better understanding of physiological barriers in solid tumors, and to develop novel strategies to exploit and/or to overcome these barriers for improved cancer detection and treatment.

Comparison of conventional chemotherapy, stealth liposomes and temperature-sensitive liposomes in a mathematical model

Various liposomal drug carriers have been developed to overcome short plasma half-life and toxicity related side effects of chemotherapeutic agents. We developed a mathematical model to compare different liposome formulations of doxorubicin (DOX): conventional chemotherapy (Free-DOX), Stealth liposomes (Stealth-DOX), temperature sensitive liposomes (TSL) with intra-vascular triggered release (TSL-i), and TSL with extra-vascular triggered release (TSL-e). All formulations were administered as bolus at a dose of 9 mg/kg. For TSL, we assumed locally triggered release due to hyperthermia for 30 min. Drug concentrations were determined in systemic plasma, aggregate body tissue, cardiac tissue, tumor plasma, tumor interstitial space, and tumor cells. All compartments were assumed perfectly mixed, and represented by ordinary differential equations. Contribution of liposomal extravasation was negligible in the case of TSL-i, but was the major delivery mechanism for Stealth-DOX and for TSL-e. The dominant delivery mechanism for TSL-i was release within the tumor plasma compartment with subsequent tissue- and cell uptake of released DOX. Maximum intracellular tumor drug concentrations for Free-DOX, Stealth-DOX, TSL-i, and TSL-e were 3.4, 0.4, 100.6, and 15.9 µg/g, respectively. TSL-i and TSL-e allowed for high local tumor drug concentrations with reduced systemic exposure compared to Free-DOX. While Stealth-DOX resulted in high tumor tissue concentrations compared to Free-DOX, only a small fraction was bioavailable, resulting in little cellular uptake. Consistent with clinical data, Stealth-DOX resulted in similar tumor intracellular concentrations as Free-DOX, but with reduced systemic exposure. Optimal release time constants for maximum cellular uptake for Stealth-DOX, TSL-e, and TSL-i were 45 min, 11 min, and <3 s, respectively. Optimal release time constants were shorter for MDR cells, with ∼4 min for Stealth-DOX and for TSL-e. Tissue concentrations correlated well quantitatively with a prior in-vivo study. Mathematical models may thus allow optimization of drug delivery systems to achieve a better therapeutic index.

Targeted drug delivery by high intensity focused ultrasound mediated hyperthermia combined with temperature-sensitive liposomes: computational modelling and preliminary in vivovalidation

PURPOSE

To develop and validate a computational model that simulates (1) tissue heating with high intensity focused ultrasound (HIFU), and (2) resulting hyperthermia-mediated drug delivery from temperature-sensitive liposomes (TSL).

MATERIALS AND METHODS

HIFU heating in tissue was simulated using a heat transfer model based on the bioheat equation, including heat-induced cessation of perfusion. A spatio-temporal multi-compartment pharmacokinetic model simulated intravascular release of doxorubicin from TSL, its transport into interstitium, and cell uptake. Two heating schedules were simulated, each lasting 30 min: (1) hyperthermia at 43 °C (HT) and (2) hyperthermia followed by a high temperature (50 °C for 20 s) pulse (HT+). As preliminary model validation, in vivo studies were performed in thigh muscle of a New Zealand White rabbit, where local hyperthermia with a clinical magnetic resonance-guided HIFU system was applied following TSL administration.

RESULTS

HT produced a defined region of high doxorubicin concentration (cellular concentration ∼15-23 µg/g) in the target region. Cellular drug uptake was directly related to HT duration, with increasing doxorubicin uptake up to ∼2 h. HT+ enhanced drug delivery by ∼40% compared to HT alone. Temperature difference between model and experiment within the hyperthermia zone was on average 0.54 °C. Doxorubicin concentration profile agreed qualitatively with in vivo fluorescence profile.

CONCLUSIONS

Computational models can predict temperature and delivered drug from combination of HIFU with TSL. Drug delivery using TSL may be enhanced by prolonged hyperthermia up to 2 h or by local cessation of vascular perfusion with a high temperature pulse following hyperthermia.

Delivery of molecular and nanoscale medicine to tumors: transport barriers and strategies

Tumors are similar to organs, with unique physiology giving rise to an unusual set of transport barriers to drug delivery. Cancer therapy is limited by nonuniform drug delivery via blood vessels, inhomogeneous drug transport into tumor interstitium from the vascular compartment, and hindered transport through tumor interstitium to the target cells. Four major abnormal physical and physiological properties contribute to these transport barriers. Accumulated solid stress compresses blood vessels to diminish the drug supply to many tumor regions. Immature vasculature with high viscous and geometric resistances and reduced pressure gradients leads to sluggish and heterogeneous blood flow in tumors to further limit drug supply. Nonfunctional lymphatics coupled with highly permeable blood vessels result in elevated hydrostatic pressure in tumors to abrogate convective drug transport from blood vessels into and throughout most of the tumor tissue. Finally, a dense structure of interstitial matrix and cells serves as a tortuous, viscous, and steric barrier to diffusion of therapeutic agents. In this review, we discuss the origins and implications of these barriers. We then highlight strategies for overcoming these barriers by modulating either drug properties or the tumor microenvironment itself to enhance the delivery and effectiveness of drugs in tumors.

Spatiotemporal measurement of tumor oxygenation reveals repeat hypoxic phenomenon in mice

Tumor hypoxia is considered a potential therapeutic problem because it reduces the effects of radiation therapy. Clinical experience has shown that long-term tumor oxygenation cannot be achieved with oxygen inhalation, but the mechanisms behind this phenomenon remain unknown. In this study, we designed an optical system for evaluating spatiotemporal changes in tissue oxygen tension (pO(2)) by phosphorescence quenching. The system can measure continuous changes in pO(2) at a fixed point and can also perform two-dimensional mapping of pO(2) in any part of the tumor tissue. We implanted tumor tissue in a dorsal skinfold chamber of C57BL/6 mice and observed tumor growth. After the tumor attained a diameter of 2 mm, the mice received oxygen inhalation and pO(2) was measured. Tumor pO(2) increased after inhalation but the oxygen level was not maintained despite continuous inhalation of pure oxygen; the tumor returned to a hypoxic state. These results mimic the clinical experience of oxygen inhalation treatment in radiation therapy. Our system reproduces the repeat hypoxic phenomenon in a murine tumor model and can be used to determine the mechanisms of oxygen metabolism in tumors.

Temporal changes in microvessel leakiness during wound healing discriminated by in vivo fluorescence recovery after photobleaching

Regeneration of injured tissue is a dynamic process, critically dependent on the formation of new blood vessels and restructuring of the nascent plexus. Endothelial barrier function, a functional correlate of vascular restructuring and maturation, was quantified via intravital microscopic analysis of 150 kDa FITC-dextran-perfused blood vessels within discrete wounds created in the panniculus carnosus (PC) muscle of dorsal skinfold chamber (DSC) preparations in mice. Time to recovery of half-peak fluorescence intensity (t(1/2)) within individual vessel segments in three functional regions of the wound (pre-existing vessels, angiogenic plexus and blind-ended vessels (BEVs)) was quantified using in vivo fluorescence recovery after photobleaching (FRAP) and linear regression analysis of recovery profiles. Plasma flux across the walls of new vessel segments, particularly BEVs, was greater than that of pre-existing vessels at days 5-7 after injury (P < 0.05). TNP-470 reduced the permeability of BEVs at the leading edge of the advancing vascular plexus as measured by the decrease in luminal t(1/2) (P < 0.05), confirming the utility of FRAP as a quantitative measure of endothelial barrier function. Furthermore, these data are suggestive of a role for TNP-470 in selection for less leaky vascular segments within healing wounds. Increased FITC-dextran leakage was observed from pre-existing vessels after treatment with TNP-470 (P < 0.05), consistent with induction of transient vascular damage, although the significance of this finding is unclear. Using in vivo FRAP this study demonstrates the relationship between temporal changes in microvascular macromolecular flux and the morphology of maturing vascular segments. This combination of techniques may be useful to assess the therapeutic potential of angiogenic agents in restoring pre-injury levels of endothelial barrier function, following the establishment of a functional vascular plexus such as in models of wounding or tumour development.

Methods for forming human microvascular tubes in vitro and measuring their macromolecular permeability

This chapter describes a protocol for forming open endothelial tubes in vitro and quantifying their permeability to macromolecules. These tubes consist of confluent monolayers of human microvascular endothelial cells in perfused microfluidic collagen gels. The cylindrical geometry of the tubes mimics the shape of microvessels in vivo; it allows simultaneous and/or repeated measurements of permeability coefficients and detection of focal leaks. We have used these in vitro models to test the effects of agonists on microvascular permeability and are developing arrays of microvascular tubes to enable large-scale testing.

Tumor-stroma: In vivo assays and intravital imaging to study cell migration and metastasis

The development of metastatic disease is often correlated with poor patient outcome in a variety of different cancers. The metastatic cascade is a complex, multistep process that involves the growth of the primary tumor and angiogenesis, invasion into the local environment, intravasation into the vasculature, tumor cell survival in the circulation, extravasation from the vasculature and sustained growth at secondary organ sites to form metastases. Although in vitro assays of single cell types can provide information regarding cell autonomous mechanisms contributing to metastasis, the in vivo microenvironment entails a network of interactions between cells which is also important. Insight into the mechanisms underlying tumor cell migration, invasion and metastasis in vivo has been aided by development of multiphoton microscopy and in vivo assays, which we will review here.

Physiologically based pharmacokinetics of molecular imaging nanoparticles for mRNA detection determined in tumor-bearing mice

Disease detection and management might benefit from external imaging of disease gene mRNAs. Previously we designed molecular imaging nanoparticles (MINs) based on peptide nucleic acids complementary to cancer gene mRNAs. The MINs included contrast agents and analogs of insulin-like growth factor 1 (IGF-1). Analysis of MIN tumor uptake data showed stronger binding in tumors than in surrounding tissues. We hypothesized that MINs with an IGF-1 analog stay in circulation by binding to IGF-binding proteins. To test that hypothesis, we fit the tissue distribution results of several MINs in xenograft-bearing mice to a physiological pharmacokinetics model. Fitting experimental tissue distribution data to model-predicted mass transfer of MINs from blood into organs and tumors converged only when the parameter for MINs bound to circulating IGF-binding proteins was set to 10%-20% of the injected MIN dose. This result suggests that previous mouse imaging trials used more MINs than necessary. This prediction can be tested by a ramp of decreasing doses.

Mathematical spatio-temporal model of drug delivery from low temperature sensitive liposomes during radiofrequency tumour ablation

PURPOSE

Studies have demonstrated a synergistic effect between hyperthermia and chemotherapy, and clinical trials in image-guided drug delivery combine high-temperature thermal therapy (ablation) with chemotherapy agents released in the heating zone via low temperature sensitive liposomes (LTSL). The complex interplay between heat-based cancer treatments such as thermal ablation and chemotherapy may require computational models to identify the relationship between heat exposure and pharmacokinetics in order to optimise drug delivery.

MATERIALS AND METHODS

Spatio-temporal data on tissue temperature and perfusion from heat-transfer models of radiofrequency ablation were used as input data. A spatio-temporal multi-compartmental pharmacokinetic model was built to describe the release of doxorubicin (DOX) from LTSL into the tumour plasma space, and subsequent transport into the extracellular space, and the cells. Systemic plasma and tissue compartments were also included. We compared standard chemotherapy (free-DOX) to LTSL-DOX administered as bolus at a dose of 0.7 mg/kg body weight.

RESULTS

Modelling LTSL-DOX treatment resulted in tumour tissue drug concentration of approximately 9.3 microg/g with highest values within 1 cm outside the ablation zone boundary. Free-DOX treatment produced comparably uniform tissue drug concentrations of approximately 3.0 microg/g. Administration of free-DOX resulted in a considerably higher peak level of drug concentration in the systemic plasma compartment (16.1 microg/g) compared to LTSL-DOX (4.4 microg/g). These results correlate well with a prior in vivo study.

CONCLUSIONS

Combination of LTSL-DOX with thermal ablation allows localised drug delivery with higher tumour tissue concentrations than conventional chemotherapy. Our model may facilitate drug delivery optimisation via investigation of the interplays among liposome properties, tumour perfusion, and heating regimen.