Electrical hemolysis of human and bovine red blood cells

A Cell-Mimicking Structure Converting Analog Volume Changes to Digital Colorimetric Output with Molecular Selectivity

We herein report a three-component cell-mimicking structure with a peroxidase-like iron oxide nanozyme as the nucleus, a molecularly imprinted hydrogel shell as cytoplasm, and a lipid bilayer membrane. The structure was characterized by cryo and negative stain TEM and also by a calcein leakage test. By introducing charged monomers, the gel shell can swell or shrink in response to salt concentration. By lowering the salt concentration, the gradual "analog" gel volume change was reflected in a switch-like "digital" colorimetric output by the burst of membrane and oxidation of substrates such as 3,3',5,5'-tetramethylbenzidine (TMB). Controlled access was also achieved by using melittin to insert channels cross the membrane, and selective molecular transport was realized by the molecularly imprinted gel. The functions of each component are coupled, and this sophisticated tripartite structure provides a new platform for modular design of new materials. Our cell-mimicking structure is functional and it is complementary to the current protocell work that aims to understand the origin of life.

Shape-dependent optoelectronic cell lysis

We show an electrical method to break open living cells amongst a population of different cell types, where cell selection is based upon their shape. We implement the technique on an optoelectronic platform, where light, focused onto a semiconductor surface from a video projector creates a reconfigurable pattern of electrodes. One can choose the area of cells to be lysed in real-time, from single cells to large areas, simply by redrawing the projected pattern. We show that the method, based on the "electrical shadow" that the cell casts, allows the detection of rare cell types in blood (including sleeping sickness parasites), and has the potential to enable single cell studies for advanced molecular diagnostics, as well as wider applications in analytical chemistry.

Electroporation of adherent cells with low sample volumes on a microscope stage

The labeling of specific molecules and their artificial control in living cells are powerful techniques for investigating intracellular molecular dynamics. To use these techniques, molecular compounds (hereinafter described simply as 'samples') need to be loaded into cells. Electroporation techniques are exploited to load membrane-impermeant samples into cells. Here, we developed a new electroporator with four special characteristics. (1) Electric pulses are applied to the adherent cells directly, without removing them from the substratum. (2) Samples can be loaded into the adherent cells while observing them on the stage of an inverted microscope. (3) Only 2 μl of sample solution is sufficient. (4) The device is very easy to use, as the cuvette, which is connected to the tip of a commercially available auto-pipette, is manipulated by hand. Using our device, we loaded a fluorescent probe of actin filaments, Alexa Fluor 546 phalloidin, into migrating keratocytes. The level of this probe in the cells could be easily adjusted by changing its concentration in the electroporation medium. Samples could be loaded into keratocytes, neutrophil-like HL-60 cells and Dictyostelium cells on a coverslip, and keratocytes on an elastic silicone substratum. The new device should be useful for a wide range of adherent cells and allow electroporation for cells on various types of the substrata.

Continuous-flow electrical lysis device with integrated control by dielectrophoretic cell sorting

We present a device capable of electrical cell lysis and evaluation of lysis efficiency in continuous flow using dielectrophoretic cell sorting. We use a combination of AC electrical fields and so-called liquid electrodes to avoid bubble creation at the electrode surface. The electrical field distribution is calculated in different electrode configurations by numerical simulations. Cell sorting shows high lysis efficiency, 99% of yeast cells sorted after lysis featuring dielectric properties similar to dead cells. A study of the potential device throughput is performed.

Deformability and stability of erythrocytes in high-frequency electric fields down to subzero temperatures

High-frequency electric fields can be used to induce deformation of red blood cells. In the temperature domain T = 0 degrees to -15 degrees C (supercooled suspension) and for 25 degrees C this paper examines for human erythrocytes (discocytes, young cell population suspended in a low ionic strength solution with conductivity sigma(25 degrees) = 154 microS/cm) in a sinusoidal electric field (nu = 1 MHz, E0 = 0-18 kV/cm) the following properties and effects as a function of field strength and temperature: 1) viscoelastic response, 2) (shear) deformation (steady-state value obtained from the viscoelastic response time), 3) stability (by experimentally observed breakdown of cell polarization and hemolysis), 4) electrical membrane breakdown and field-induced hemolysis (theoretical calculations for ellipsoidal particles), and 5) mechanical hemolysis. The items 2-4 were also examined for the frequency nu = 100 kHz and for a nonionic solution of very low conductivity (sigma(25 degrees) = 10 microS/cm) to support our interpretations of the results for 1 MHz. Below 0 degrees C with decreasing temperature the viscoelastic response time tau(res)(T) for the cells to reach steady-state deformation values d(infinity,E) increases and the deformation d(infinity,E)(T) decreases strongly. Both effects are especially high for low field strengths. The longest response time of approximately 30 s was obtained for -15 degrees C and small deformations. For 1 MHz the cells can be highly elongated up to 2.3 times their initial diameter a0 for 25 degrees and 0 degrees C, 2.1a0 for -10 degrees C and still 1.95a0 for -15 degrees C. For T > or = 0 degrees C the deformation is limited by hemolysis of the cells, which sets in for E0(lysis)(25 degrees) approximately 8 kV/cm and E0(lysis)(0 degrees) approximately 14 kV/cm. These values are approximately three times higher than the corresponding calculated critical field strengths for electrically induced pore formation. Nevertheless, the observed depolarization and hemolysis of the cells is provoked by electrical membrane breakdown rather than by mechanical forces due to the high deformation. For the nonionic solution, where no electrical breakdown is expected in the whole range for E0, the cells can indeed be deformed to even higher values with a low hemolytic rate. Below 0 degrees C we observe no hemolysis at all, not even for the frequency 100 kHz, where the cells hemolyze at 25 degrees C for the much lower field strength E0(lysis) approximately 2.5 kV/cm. Obviously, pore formation and growth are weak for subzero temperatures.

Control by electrical parameters of short- and long-term cell death resulting from electropermeabilization of Chinese hamster ovary cells

Chinese hamster ovary (CHO) cells were pulsed by using brief intense square-wave electric field pulses. The electrical treatment induced a transient local permeabilization of the cell membrane. The growth of CHO cells after electropulsation in an iso-osmotic pulsing buffer with low ionic content was measured. Parallel experiments evaluated cell death which took place in the minute range after electropulsation (short-term death) and the cell death upon 24 h (long-term death). Short-term cell death was defined as the case of cells with membrane still permeable to Direct-blue at 15 min after electropulsation. It was observed only under stringent pulsing conditions where electropermeabilization of the two sides of the cell was triggered. The long-term cell death, i.e., the inability of some pulsed cells to grow was observed as soon as permeabilization had been triggered. The higher the permeabilization level of the cell population was, the higher the long-term cell death level was. The cell death was linearly related to the reciprocal of the electric field intensity, i.e., to the fraction of the membrane area electrically brought to the permeable state. From this work, it appeared that for high levels of permeabilization of a cell suspension, best cell survivals were obtained if limited alterations were triggered over a large area of the plasma membrane (single pulse with high intensity) than if a small area of the membrane was strongly altered (repetitive pulses with small intensity). The highest yield of viable permeabilized cells was achieved when using one single pulse of duration up to 1 ms.

Electrical properties of cell pellets and cell electrofusion in a centrifuge

A new approach is proposed for studying cell deformability by centrifugal force, electrical properties of cell membranes in a high electric field, and for performing efficient cell electrofusion. Suspensions of cells (L929 and four other cell types examined) are centrifuged in special chambers, thus forming compact cell pellets in the gap between the electrodes. The setup allows measurement of the pellet resistance and also the high-voltage pulse application during centrifugation. The pellet resistance increases sharply with the centripetal acceleration, which correlates with reduction of the cell pellet porosity due to cell compression and deformation. Experiments with cells pretreated with cytochalasin B or colcemid showed that cell deformability depends significantly on the state of cytoskeleton. When the voltage applied to the cell pellet exceeds a 'critical' value, electrical breakdown (poration) of cell membranes occurs. This is seen as a deflection in the I(V) curve for the cell pellet. The electropores formed during the breakdown reseal in several stages: the fastest takes 0.5-1 ms while the whole process completes in minutes. A novel effect of colloid-osmotic compression of cell pellets after electric cell permeabilization is described. Supercritical pulse application to the cell pellet during intensive centrifugation leads to massive cell fusion. The fusion index grows with the increase of centripetal acceleration, and drops drastically when the pulse is applied after the centrifuge is stopped. The colloid-osmotic pellet compression enhances the fusion efficiency. No fusion occurs when cells are brought in contact after the pulse treatment. The data suggest that tight intermembrane contact formed prior to pulse application is a prerequisite condition for efficient cell electrofusion. The capacities of the technique proposed and the mechanism of membrane electrofusion are discussed.

Cell electropermeabilization: a new tool for biochemical and pharmacological studies

Cell electropermeabilization is the transient permeabilization of the plasma membrane by means of short and intense electric pulses. Under optimized conditions, electropermeabilization is compatible with cell survival. It provides a direct access into the cytosol to ions, small molecules, exogenous drugs and macromolecules. As cells remain functional, a large variety of cell biology questions can be addressed. Such 'in situ biochemistry' opens new possibilities beside the more classical studies dealing with unpermeabilized cells or subcellular extracts. Electropermeabilization also allows pharmacological studies with cells, cultured monolayers and in vivo tissues as well as the design of drug controlled-release systems.

Electrically induced DNA uptake by cells is a fast process involving DNA electrophoresis

Simian Cos-1 cells were transfected electrically with the plasmid pCH110 carrying the beta-galactosidase gene. The efficiency of transfection was determined by a transient expression of this gene. When the plasmid was introduced into a cell suspension 2 s after pulse application, the transfection efficiency was shown to be less than 1% as compared with a prepulse addition of DNA. Addition of DNAase to suspension immediately after a pulse did not decrease transfection efficiency, thus the time of DNA translocation was estimated to be less than 3 s. The use of electric treatment medium, in which the postpulse colloid-osmotic cell swelling was prevented, did not affect the transfection efficiency. These results contradict both assumptions of free DNA diffusion into cell through the long-lived pores and of involvement of osmotic effects in DNA translocation. Transfection of cells in monolayer on a porous film allowed creation of the spatial asymmetry of cell-plasmid interaction along the direction of electric field applied. A pulse with a polarity inducing DNA electrophoresis toward the cells resulted in the 10-fold excess of transfection efficiency compared with a pulse with reverse polarity. Ficoll (10%) which increases medium viscosity or Mg2+ ions (10 mM) which decrease the effective charge of DNA, both reduced transfection efficiency 2-3-fold. These results prove a significant role of DNA electrophoresis in the phenomenon considered. The permeability of cell membranes for an indifferent dye was shown to increase noticeably if the cells were pulsed in the presence of DNA. This indicates a possible interaction of DNA translocated with the pores in an electric field, that results in pore expansion.

Reversible large-scale deformations in the membranes of electrically-treated cells: electroinduced bleb formation

Morphological changes in electrically-treated cells have been investigated by light and scanning electron microscopy. The application of 100-microseconds rectangular pulses of 1.3 kV/cm electric field to different types of cells (FBT, MEF, RAT-1, L-cells) in the physiological medium leads to the formation and growth of spherical and hemispherical protuberances of the cell membrane. The formation of such electroinduced blebs is not associated with the cells' death and is reversible. The electroinduced blebs are mainly formed at those sites of the cell membrane which are subjected to the highest voltage during the electric pulses. Increasing the tonicity of the medium by introducing 20 mM of inulin prevents the bleb formation, indicating the osmotically-dependent nature of the processes involved. When electric pulses are applied to the cells pre-treated with cytochalasin B, the formation of electroinduced blebs occurs independently from cytochalasin-induced ones originally present on such cells. Speculations are presented concerning the nature of the membrane structural changes underlying the electroinduced blebbing and their possible role in some electrically-induced processes.

High yields of stable transformants by hypo-osmolar plasmid electroinjection

Electrotransfection of mouse L cells and macrophages suspended in strongly hypo-osmolar solutions gave high yields of stable transformants which significantly exceeded the clone number obtained under iso-osmolar conditions. The cells survived these extremely low osmolarities for 1 h without any apparent deterioration of cellular or membrane functions. Highest yields were obtained in buffered 75 mosmol solutions containing 30 mM KCl and an appropriate amount of inositol provided that the strength of the breakdown pulse was matched to the dramatic increase in cell volume at low osmolarity. The absolute clone number depended on the post-incubation time in the hypo-osmolar solution after application of a single breakdown pulse at 4 degrees C. The absolute number of transformants was maximum when post-incubation was restricted to 2 min. Towards longer incubation times the absolute number decreased even though the relative clone number was similar. This was because of a corresponding decrease of the number of viable cells. It is conceivable that enhanced DNA uptake in hypo-osmolar solutions is faciliated by an overall slight (and reversible) increase in membrane permeability generated by the osmotically created tension in the membrane of the swollen cells.

Enhanced hybridoma production by electrofusion in strongly hypo-osmolar solutions

Electrofusion of mammalian cells in strongly hypo-osmolar media containing sorbitol, small amounts of divalent cations and albumin resulted in high yields of hybrids. The number of viable hybrids was higher than any value for chemically- or electrically-mediated fusion reported in the literature. Optimum clone numbers were obtained for fusion of osmotically-stable subclones of murine myeloma cells with DNP-Hy-stimulated lymphocytes provided that the osmolarity of the fusion medium was as low as 75 mosmol/l. Similar results were obtained for fusion of osmotically stable subclones of myeloma cells with the murine hybridoma cell line G8. Due to the dramatic increase in volume the field strength of the breakdown pulse (leading to fusion of the dielectrophoretically aligned cells) has to be reduced, as predicted by theory. The efficacy of hypo-osmolar electrofusion allowed the use of very few cells (about 10(5) lymphocytes or G8 cells per fusion chamber). This figure is considerably smaller than that reported in the literature for iso-osmolar electrofusion. It is significant that, in contrast to iso-osmolar conditions, the fusion yield in hypo-osmolar electrofusion was reproducible over long periods of time and less dependent of variations between cultures. At suspension densities of about 10(6) cells per fusion chamber (normally used in iso-osmolar electrofusion) hypo-osmolar electrofusion of homogeneous cell suspensions resulted in the formation of many giant cells when the appropriate field conditions were applied. Similar high or, at some field strengths, even higher numbers of clones at low cell suspension density were obtained when G8 and myeloma cells were first exposed during the washing procedure to strongly hypo-osmolar media, but then transferred to iso-osmolar solutions for electrofusion. Similar experiments with lymphocytes and myeloma cells failed because of destruction of many lymphocytes by the two osmotic shock steps in rapid succession. Volume distribution measurements of G8 and myeloma cells showed that after re-incubation of the osmotically pre-stressed cells the original volume distribution is largely, but not completely re-established. This and other results indicate that osmotic pressure gradients and associated tensions in the membrane do not play a primary role in the initiation of the electrofusion process. The experiments suggest that due to the osmotic (pre-) stress the membrane permeability is slightly and uniformly increased presumably due to the dissolution of membrane- and cell-skeleton proteins. Obviously, this facilitates electrofusion in hypo-osmolar or subsequently in iso-osmolar solutions.

Reversible electropermeabilisation of human and rat blood platelets: evaluation of morphological and functional integrity 'in vitro' and 'in vivo'

A high-voltage discharge procedure has been developed for permeabilising the plasma membranes of both human and rat blood platelets. The cells can be resealed by incubation at 37 degrees C, show less than 4% loss of lactate dehydrogenase (LDH) implying minimal cell lysis and also have well maintained morphological and functional integrity. The prototype apparatus used at field strengths between 6 and 8 kV/cm produces membrane pores which allow free diffusion of low molecular weight substances such as adenine nucleotides, inositol phosphate and fluorescent dyes. Two properties, namely Ca2+-induced secretion of granule stored 5-hydroxytryptamine (5HT) and inositol 1,4,5-trisphosphate (IP3)-induced release of intracellularly sequestered 45Ca, which are both well expressed immediately after permeabilisation, are essentially abolished after resealing. The efficiency of permeabilisation and resealing can be simply monitored by shifts in 'apparent platelet volume' using a resistive particle counter (Coulter). Permeabilised platelets show a shift in modal volumes from a control range 4-7 fl to 10-15 fl. Resealing restores these modal volumes to the original control range. Encapsulation of the fluorochrome, Lucifer yellow (Mr 550), during permeabilisation revealed that after resealing greater than 85% of rat platelets, and close to 100% human platelets, contained the encapsulated dye. The initial rates and % aggregation responses of both human and rat platelets to collagen, thrombin and the thromboxane A2-mimetic U46619 remained essentially normal after permeabilisation and resealing further illustrating the maintenance of functional competence following treatment. Resealed rat platelets reinfused into the circulation after labelling with [111In]indium oxine gave survival curves similar to those of control platelets. Therefore, this reversible permeabilisation procedure may allow the use of autologous or heterologous platelets as carrier vehicles for the delivery of drugs and other agents 'in vivo'.

Electrical stability of erythrocytes in the presence of divalent cations

Erythrocytes suspended in a medium of low ionic strength lyse under the effect of an exponential electrical pulse. The percentage of haemolysed cells decreases several-fold in the presence of divalent cations. The protective action of the ions studied increases in the following order: Ca++, Mg++, Zn++. It is assumed that divalent ions bind to the negative charges of the lipid and protein molecules and reduce their electrostatic repulsion, which results in stabilization of the membranes.

Large scale transfection of mouse L-cells by electropermeabilization

Mouse L-cells were transfected by electropermeabilization using the selectable plasmid pSV2-neo which confers resistance to G-418 (Geneticin). The DNA concentration used was 1 microgram/ml, the field strength was 10 kV/cm, the duration of the pulse was 5 microseconds. Transfection yield was optimal at a temperature of 4 degrees C when using a time in between consecutive pulses of 1 minute compared to shorter (of the order of seconds) or longer (3 minutes) time intervals. A more detailed study of the relationship between the number of pulses applied (up to 10) and transfection yield showed it to be almost linear in this range at 4 degrees C. The yield of transfectants in response to 10 pulses was up to 1000 per 10(6) cells (using 3.3 pg DNA per cell). The influence of the growth phase of the cells on the transfection yield and/or the subpopulation of the mouse L-cell line used was shown. Furthermore the clone yield depended on the DNA per cell ratio within a very small range.

Usefulness of Ficoll in electric field-mediated cell fusion

Electrofusion is a technique that enables the production of new cell types with desired properties to be done. Ehrlich ascites tumor cells are fused by means of an electric field. Under too harsh external field strength or pulse length conditions, however, membrane breakdown leads to a loss of cellular cytoplasm. Addition of the high polymer Ficoll to the fusion medium increases its density and osmotic pressure, thus preventing cytoplasm from running out and, therefore, maintaining cell viability. Fusion between cells of different sizes is made possible or facilitated by means of Ficoll, as big cells do not lose their cytoplasm under conditions required for enhancing membrane permeability of the small cells. In presence of the proteolytic enzyme pronase, addition of Ficoll to the fusion medium further raises the fusion percentage compared to the exclusive addition of pronase. The fusion of cells of different densities is also greatly facilitated and its percentage increased by addition of Ficoll, thus obviating the necessity to perform electrofusion under conditions of microgravity.

Osmotic forces in artificially induced cell fusion

The importance of cell swelling in the fusion of erythrocytes by three different chemical treatments has been investigated with cells that were cytoplasmically labelled with 6-carboxyfluorescein. Hen erythrocytes, which had been pre-incubated with ionophore A23187 and 5 mM Ca2+ to cause a proteolytic breakdown of the membrane skeleton, were induced to fuse by applying an osmotic shock. Human erythrocytes that had been incubated in an isotonic salt/buffer solution, which was progressively diluted and which contained 0.5 mM La3+ to minimise cell lysis, were also fused. In addition, the fusion of human erythrocytes by 40% poly(ethylene glycol) began only when the poly(ethylene glycol) was diluted, and it mostly occurred when the diluted polymer solution was subsequently replaced by isotonic buffer. In related experiments, the effect of an osmotic gradient on electrically induced cell fusion has been studied. Human erythrocytes in 150 mM erythritol fused more readily than less swollen cells in 200-400 mM erythritol when subjected to a 20 microseconds pulse of 3.5 kV X cm-1, indicating that the extent of cell fusion induced by the breakdown pulse is governed by the combined electrical-compressive and osmotic forces. Since osmotic phenomena are already known to be important in exocytosis, we suggest that these observations on cell fusion indicate that osmotic forces may provide the driving force for many membrane fusion reactions in biological systems.

Permeability of membrane of Babesia canis infected erythrocytes--influence of an external electric field

The erythrocytes infection by a parasite (Babesia canis) induced a modification of the biological membrane which was studied using the effect of electric pulses of short duration. This process induces the formation of pores and during the opening hemoglobin and other cytoplasmic proteins diffuse out of the cells and are recovered in the external medium. The rate of molecular permeation across the electrically perforated membranes depends on several factors: electric-field strength, pulses number, pulse duration, temperature and cellular concentration. Even for low parasitemia, differences in the effect of these parameters were observed between infected and non-infected erythrocytes.

Determination of intracellular conductivity from electrical breakdown measurements

The intracellular resistivity (conductivity) of cells can be easily calculated with high accuracy from electrical membrane breakdown measurements. The method is based on the determination of the size distribution of a cell suspension as a function of the electrical field strength in the orifice of a particle volume analyser (Coulter counter). The underestimation of the size distribution observed beyond the critical external field strength leading to membrane breakdown represents a direct access to the intracellular resistivity as shown by the theoretical analysis of the data. The potential and the accuracy of the method is demonstrated for red blood cells and for ghost cells prepared by electrical haemolysis. The average value of 180 omega X cm for the intracellular resistivity of intact red blood cells is consistent with the literature.

Formation and properties of aqueous leaks induced in human erythrocytes by electrical breakdown

Leaks were induced in human erythrocytes by brief (tau = 1-40 microseconds) discharges of high electric fields (3-20 kV/cm). Leak permeabilities were characterized by measuring (a) net and tracer fluxes of K+ and nonelectrolytes under protection of the cells against colloid-osmotic lysis, or (b) rates of colloid osmotic lysis in various salt solutions. The induced permeabilities are essentially stable for hours at 0-2 degrees C. Leak permeability P increases exponentially with the breakdown voltage ED according to a function of the general type P = bED. The basis b varies with the pulse length. A log-linear presentation reveals a biphasic linear relationship with a break at which the slope (= log b) decreases markedly. Elevated ionic strengths of the suspension medium during the electric discharge enhance leak formation. Leak permeability exhibits an apparent activation energy of 29 +/- 5 kJ/mol, indicative of diffusion through aqueous pathways. Somewhat differing equivalent pore radii emerge from measurements with different probes: 0.6-0.8 nm from tracer fluxes of polyols (Mr = 3600, ED = 4-7 kV/cm) and 0.8-1.9 nm from osmotic protection studies with polyethylene glycols (Mr = 200-3300, ED = 6-10 kV/cm). These numbers and the non-monoexponential increase of leak permeability with the field strength suggest a dual mechanism for the increase of leak permeability: an increase of the number of pores at low breakdown voltage and an additional increase of pore size at higher voltage. Estimated numbers of pores range from 1 to 10 per cell, which suggests dynamic fluctuating structural defects to be involved. The leaks discriminate small monovalent inorganic ions in the sequence of free solution mobility. Organic anions are discriminated according to size and charge. Common properties of these electrically induced defects and of chemically induced leaks (diamide, periodate, t-butylhydroperoxide) in the erythrocyte membrane suggest close similarities in the molecular organization.

Stomatocytosis of latex particles (0.26 micron) by rat erythrocytes by the electrical breakdown technique

The uptake of macromolecules by erythrocytes can be achieved with the electrical breakdown technique [2, 4]. In this technique the erythrocyte membranes are subjected to a high external electrical field pulse for a short period. Local, reversible breakdowns of the cell membrane occur above a critical field strength which lead to a time-dependent increase in the permeability of the membrane. By this means, human erythrocyte membranes can be made permeable to DNA, pharmaceutical compounds, and latex particles following an electrical field pulse [1, 3, 5]. Larger particles should also be taken up by erythrocytes using this method. Vienken et al. [5] demonstrated the entrapment of latex particles with a diameter of 0.091 micron in human erythrocyte ghosts, although this was shown with only a single electron micrograph which does not prove that the ghost membrane was intact. In our experiments in order to entrap latex particles with a diameter of 0.26 micron rat erythrocytes were subjected to an electrical field pulse of 12 kV/cm with a decay time of 60 microseconds. Experiments using the electron microscope show that after such an electrical field pulse the uptake of latex particles by rat erythrocytes follows the stomatocytotic pathway. We show further that using electron microscopic techniques, a single section cannot demonstrate the completed uptake of a latex particle by the erythrocyte.

Erythrocyte and ghost cytoplasmic resistivity and voltage-dependent apparent size

Particle resistivity is explicitly included in the equations relating volume to voltage pulse, in electronic cell sizing or resistive pulse spectroscopy (RPS). It has long been known that in high electric fields cell resistivity decreases as the membrane undergoes dielectric breakdown. At sufficiently high electric field strengths, well past dielectric breakdown, the red cell membrane becomes electrically transparent, or nearly so, and apparent cell size becomes essentially a function of the cytoplasmic resistivity. Electronic cell sizing is traditionally carried out at low electric field strengths, and corrections made for the influence of cell shape by use of the Laplace equation. We find the Laplace solution to be still applicable at very high electric field strengths for purposes of calculating specific cytoplasmic resistivity from RPS measurements. Our value for discocytes, 220 omega X cm, is in good agreement with published results obtained by other researchers using other techniques. We have also applied these same procedures to determine the time course of voltage-dependent resistivity changes in ghosts and intact spherocytes, during the first 5 min after suspension in hypotonic medium. We believe these to be the first explicit calculations of particle specific resistivity from post-dielectric-breakdown apparent size, using traditional electronic sizing techniques.

Electric field effects on bacteria and yeast cells

Comparative studies were carried out describing the lethal effects of electric pulses on GRAM-negative bacteria, GRAM-positive bacteria, and yeast cells. Microorganisms are killed by the pulse treatment without visible morphological destruction. The observed survival rates are figured as functions of the field strength E and the treatment time t (pulse number X time constant) revealing three explicit parameters as sufficient to explain the kinetics of the results. These parameters are determined by the species of microorganism used and moreover depend on the physiological properties of the microbial population. GRAM-positive bacteria and yeasts were found to be less sensitive to electric pulse treatment than GRAM-negative bacteria, when low pulse numbers are applied. Treatment with high pulse numbers reveals survival rates below 1% for all microorganisms examined. Cells from the logarithmic growth phase are killed in markedly higher percentage than cells harvested from the stationary growth phase. The obtained results as well as further studies confirm the hypothesis of an electric induced selective damage of inner cell membranes.

General and transport properties of hypotonic and isotonic preparations of resealed erythrocyte ghosts

Resealed human erythrocyte ghosts are regarded as valuable tools for the study of membrane properties. In order to investigate to what extent preparation procedures affect the yield of ghosts, their general properties, and their permeability, ghosts prepared by lysis at low (hypotonic media) and high (isotonic media) ionic strength were compared with each other and with native erythrocytes. For isotonic lysis, cells were either subjected to dielectric breakdown or suspended in isotonic NH4Cl solutions. In spite of very different characteristics of the lysis and the resealing process in the three types of preparations, the resulting ghosts do not differ in a number of features except for somewhat varying yields and for properties resulting from the mode of lysis. Specific transport properties, as characterized by the mediated fluxes of m-erythritol, L-arabinose, L-lactate, and sulfate, proved to be unaltered with a few unsystematic exceptions. The simple nonmediated fluxes of all these permeants, as measured in the presence of inhibitors, however, were enhanced between 1.5- and 4-fold, indicating a somewhat increased ground permeability (of the lipid domain) in all ghost membranes.

High frequency fusion of plant protoplasts by electric fields

Mesophyll cell protoplasts of Vicia faba were collected by dielectrophoresis in a highly inhomogeneous alternating electric field (sine wave, 5 to 10 V peak-to-peak value, 500 kHz, electrode distance 200 μm). Under these conditions, the cells formed aggregates of two or three on the electrodes or bridges consisting of 4 to 6 protoplasts between the electrodes. This "pearl chain" arrangement of the cells was only stable for the duration of the applied field. By the additional application of a high single field pulse (square wave, 15 V, 50 μs), it was possible to induce cell fusion within the aggregates or bridges. This electrically stimulated fusion of cells proceeded at room temperature and under physiological pH-conditions, without the use of chemical reagents, and gave a high yield. Smaller fused aggregates formed spheres within a few minutes. During the dielectrophoretically induced adhesion of the protoplasts to one another, the field strength must be chosen such that dielectric breakdown of the membrane is avoided, but at the same time, the strength of the subsequently applied single field pulse must be high enough to induce dielectric breakdown at the sites of contact between the protoplast membranes. From these results, one can conclude that in addition to close contact between membranes, the prerequisite for electrically stimulated cell fusion is dielectric breakdown which leads to changes in the membrane conductance, permeability, and probably fluidity.

Electrical field effects induced in membranes of developing chloroplasts

Etioplasts, etiochloroplasts, and chloroplasts of Avena sativa L. purified on a Percoll gradient were subjected to increasing electric field strengths in the orifice of a hydrodynamically focussing Coulter Counter. The change in resistance of the orifice when an organelle is present correlates well with the size of the plastid for field strengths up to about 3.5 kV cm(-1). Beyond this field strength, depending on the size of the organelle, the size is underestimated. The underestimation of the size is caused by the dielectric breakdown of the envelope membranes once a critical membrane potential has been exceeded. Beyond breakdown the signal of the particle is predominately determined both by the internal conductivity and the increased membrane conductivity. Measurements of the breakdown voltage of different developmental stages of the plastids reveal that the breakdown voltage decreases from 1.2 V in etioplasts to about 0.9 V in chloroplasts after 48 h illumination. The decrease in breakdown voltage can be explained in terms of increasing incorporation of proteins into the inner envelope membrane during development.This view is consistent with conclusions drawn by other authors from transport and biochemical studies. The underestimation of the size beyond breakdown is about 20% and increases to a constant value of about 40% during the first 3 h of illumination. The underestimation decreases again to about 10% when the chloroplast stage is reached. This result is consistent with the current view of chloroplast development. Mobilisation of glucans, the transformation of the prolamellar body of etioplasts into thylacoid membranes as well as an intensive synthesis of pigments and enhanced rates of ions transport in the first hour of illumination gives rise to an increased pool of ionic compounds within the plastid stroma.It should be noted that purification of the plastids on Percoll gradient leads to size distributions which are almost normally distributed over the whole field range, suggesting that the preparations are also electrically homogeneous (U. Zimmermann, F. Riemann and G. Pilwat: Biochim. Biophys. Acta 436, 460-474 (1976)). In contrast with results of Lürssen, K., Z. Naturforsch. 25b, 1113-1119 (1970) only a slight increase of the modal volume from the etioplast stage to the chloroplast stage is observed.

Lethal effects of high-voltage pulses on E. coli K12

The lethal effects of high-voltage capacitor-discharges in suspensions of E. coli K12 with varying electrolytes have been examined. A reduction of more than 99.9% of living cells, dependent on the applied voltage could be proved. The bactericidal action is assumed to be due to direct effects of high electric fields. Electrolytically produced chlorine was shown to act as an additional toxic agent, when chloride is present in the treated medium. The relative survival rate of bacteria has been found to depend also on the concentration of cells during pulse treatment.

Voltage pulsation of sickle erythrocytes enhances membrane permeability to oxygen

Treatment of sickle red cells (SS homozygous) with a voltage pulse of less than 0.8 kV/cm and duration of 20 mus caused a change in the cell membrane, so as to facilitate the permeation of oxygen. The unsickling of the treated cells after a re-introduction of oxygen took place at a much faster rate. Neither leakages of Na+ and K+, nor a change in the cell volume occurred as the result of the low voltage pulsation. The effect of the voltage treatment persisted for hours at 25 degrees C but disappeared rapidly at 37 degrees C. The result suggests that a selective modification of membrane permeability may be achieved by the voltage pulsation technique.

Reversible electrical breakdown of lipid bilayer membranes: a charge-pulse relaxation study

Charge-pulse experiments were performed with lipid bilayer membranes from oxidized cholesterol/n-decane at relatively high voltages (several hundred mV). The membranes show an irreversible mechanical rupture if the membrane is charged to voltages on the order of 300 mV. In the case of the mechanical rupture, the voltage across the membrane needs about 50-200 musec to decay completely to zero. At much higher voltages, applied to the membrane by charge pulses of about 500 nsec duration, a decrease of the specific resistance of the membranes by nine orders of magnitude is observed (from 10(8) to 0.1 omega cm2), which is correlated with the reversible electrical breakdown of the lipid bilayer membrane. Due to the high conductance increase (breakdown) of the bilayer it is not possible to charge the membrane to a larger value than the critical potential difference Vc. For 1 M alkali ion chlorides Vc was about 1 V. The temperature dependence of the electrical breakdown voltage Vc is comparable to that being observed with cell membranes. Vc decreases between 2 and 48 degrees C from 1.5 to 0.6 V in the presence of 1 M KCl. Breakdown experiments were also performed with lipid bilayer membrane composed of other lipids. The fast decay of the voltage (current) in the 100-nsec range after application of a charge pulse was very similar in these experiments compared with experiments with membranes made from oxidized cholesterol. However, the membranes made from other lipids show a mechanical breakdown after the electrical breakdown, whereas with one single membrane from oxidized cholesterol more than twenty reproducible breakdown experiments could be repeated without a visible disturbance of the membrane stability. The reversible electrical breakdown of the membrane is discussed in terms of both compression of the membrane (electromechanical model) and ion movement through the membrane induced by high electric field strength (Born energy).