SSR marker-assisted improvement of fiber qualities in Gossypium hirsutum using G. barbadense introgression lines

Unravelling the genetic basis and regulation networks related to fibre quality improvement using chromosome segment substitution lines in cotton

The elucidation of genetic architecture and molecular regulatory networks underlying complex traits remains a significant challenge in life science, largely due to the substantial background effects that arise from epistasis and gene-environment interactions. The chromosome segment substitution line (CSSL) is an ideal material for genetic and molecular dissection of complex traits due to its near-isogenic properties; yet a comprehensive analysis, from the basic identification of substitution segments to advanced regulatory network, is still insufficient. Here, we developed two cotton CSSL populations on the Gossypium hirsutum background, representing wide adaptation and high lint yield, with introgression from G. barbadense, representing superior fibre quality. We sequenced 99 CSSLs that demonstrated significant differences from G. hirsutum in fibre, and characterized 836 dynamic fibre transcriptomes in three crucial developmental stages. We developed a workflow for precise resolution of chromosomal substitution segments; the genome sequencing revealed substitutions collectively representing 87.25% of the G. barbadense genome. Together, the genomic and transcriptomic survey identified 18 novel fibre-quality-related quantitative trait loci with high genetic contributions and the comprehensive landscape of fibre development regulation. Furthermore, analysis determined unique cis-expression patterns in CSSLs to be the driving force for fibre quality alteration; building upon this, the co-expression regulatory network revealed biological relationships among the noted pathways and accurately described the molecular interactions of GhHOX3, GhRDL1 and GhEXPA1 during fibre elongation, along with reliable predictions for their interactions with GhTBA8A5. Our study will enhance more strategic employment of CSSL in crop molecular biology and breeding programmes.

Recent advances and future perspectives in early-maturing cotton research

Cotton's fundamental requirements for long periods of growth and specific seasonal temperatures limit the global arable areas that can be utilized to cultivate cotton. This constraint can be alleviated by breeding for early-maturing varieties. By delaying the sowing dates without impacting the boll-opening time, early-maturing varieties not only mitigate the yield losses brought on by unfavorable weathers in early spring and late autumn but also help reducing the competition between cotton and other crops for arable land, thereby optimizing the cropping system. This review presents studies and breeding efforts for early-maturing cotton, which efficiently pyramid early maturity, high-quality, multiresistance traits, and suitable plant architecture by leveraging pleiotropic genes. Attempts are also made to summarize our current understanding of the molecular mechanisms underlying early maturation, which involves many pathways such as epigenetic, circadian clock, and hormone signaling pathways. Moreover, new avenues and effective measures are proposed for fine-scale breeding of early-maturing crops to ensure the healthy development of the agricultural industry.

Genome-Wide Introgression and Quantitative Trait Locus Mapping Reveals the Potential of Asian Cotton (Gossypium arboreum) in Improving Upland Cotton (Gossypium hirsutum)

Gossypium arboreum (2n=2x=26, A₂), the putative progenitor of the A_t-subgenome of Gossypium hirsutum (2n=4x=52, AD), is a repository of genes of interesting that have been eliminated during evolution/domestication of G. hirsutum. However, its valuable genes remain untapped so far due to species isolation. Here, using a synthetic amphiploid (AADDA₂A₂) previously reported, we developed a set of 289 G. arboreum chromosome segment introgression lines (ILs) in G. hirsutum by expanding the backcrossing population and through precise marker-assisted selection (MAS) although complex chromosomal structural variations existed between parents which severely hindered introgression. Our results showed the total coverage length of introgressed segments was 1,116.29 Mb, representing 78.48% of the A_t-subgenome in the G. hirsutum background, with an average segment-length of 8.69 Mb. A total of 81 co- quantitative trait loci (QTLs) for yield and fiber quality were identified by both the RSTEP-ADD-based QTL mapping and the genome-wide association study (GWAS) analysis, with 1.01-24.78% of the phenotypic variance explained. Most QTLs for boll traits showed negative additive effects, but G. arboreum still has the potential to improve boll-number traits in G. hirsutum. Most QTLs for fiber quality showed negative additive effects, implying these QTLs were domesticated in G. hirsutum compared with G. arboreum and, a small quantity of fiber quality QTLs showing positive additive effects, conversely; however, indicates that G. arboreum has the underlying genes of enhancing fiber quality of G. hirsutum. This study provides new insights into the breeding genetic potential of G. arboreum, lays the foundation for further mining favorable genes of interest, and provides guidance for inter-ploidy gene transference from relatives into cultivated crops.

Validation of QTLs for Fiber Quality Introgressed from Gossypium mustelinum by Selective Genotyping

Gene introgression from wild species has been shown to be a feasible approach for fiber quality improvement in Upland cotton. Previously, we developed an interspecific G. mustelinum × G. hirsutum advanced-backcross population and mapped over one hundred QTL for fiber quality traits. In the current study, a trait-based selective genotyping approach was utilized to prioritize a small subset of introgression lines with high phenotypic values for different fiber quality traits, to simultaneously validate multiple fiber quality QTL in a single experiment. A total of 75 QTL were detected by CIM and/or single-marker analysis, including 11 significant marker-trait associations (P < 0.001) and three putative associations (P < 0.005) also reported in earlier studies. The QTL that have been validated include three each for fiber length, micronaire, and elongation, and one each for fiber strength and uniformity. Collectively, about 10% of the QTL previously reported have been validated here, indicating that selective genotyping has the potential to validate multiple marker-trait associations for different traits, especially those with a moderate to large-effect detected simultaneously in one experimental population. The G. mustelinum alleles contributed to improved fiber quality for all validated loci. The results from this study will lay the foundation for further fine mapping, marker-assisted selection and map-based gene cloning.

Examining two sets of introgression lines across multiple environments reveals background-independent and stably expressed quantitative trait loci of fiber quality in cotton

Background-independent (BI) and stably expressed (SE) quantitative trait loci (QTLs) were identified using two sets of introgression lines across multiple environments. Genetic background more greatly affected fiber quality traits than environmental factors. Sixty-one SE-QTLs, including two BI-QTLs, were novel and 48 SE-QTLs, including seven BI-QTLs, were previously reported. Cotton fiber quality traits are controlled by QTLs and are susceptible to environmental influence. Fiber quality improvement is an essential goal in cotton breeding but is hindered by limited knowledge of the genetic basis of fiber quality traits. In this study, two sets of introgression lines of Gossypium hirsutum × G. barbadense were used to dissect the QTL stability of three fiber quality traits (fiber length, strength and micronaire) across environments using 551 simple sequence repeat markers selected from our high-density genetic map. A total of 76 and 120 QTLs were detected in the CCRI36 and CCRI45 backgrounds, respectively. Nine BI-QTLs were found, and 78 (41.71%) of the detected QTLs were reported previously. Thirty-nine and 79 QTLs were SE-QTLs in at least two environments in the CCRI36 and CCRI45 backgrounds, respectively. Forty-eight SE-QTLs, including seven BI-QTLs, were confirmed in previous reports, and 61 SE-QTLs, including two BI-QTLs, were considered novel. These results indicate that genetic background more strongly impacts on fiber quality traits than environmental factors. Twenty-three clusters with BI- and/or SE-QTLs were identified, 19 of which harbored favorable alleles from G. barbadense for two or three fiber quality traits. This study is the first report using two sets of introgression lines to identify fiber quality QTLs across environments in cotton, providing insights into the effect of genetic backgrounds and environments on the QTL expression of fiber quality and important information for the genetic basis underlying fiber quality traits toward QTL cloning and molecular breeding.

QTL analysis and candidate gene identification for plant height in cotton based on an interspecific backcross inbred line population of Gossypium hirsutum × Gossypium barbadense

We constructed the first high-quality and high-density genetic linkage map for an interspecific BIL population in cotton by specific-locus amplified fragment sequencing for QTL mapping. A novel gene GhPIN3 for plant height was identified in cotton. Ideal plant height (PH) is important for improving lint yield and mechanized harvesting in cotton. Most published genetic studies on cotton have focused on fibre yield and quality traits rather than PH. To facilitate the understanding of the genetic basis in PH, an interspecific backcross inbred line (BIL) population of 250 lines derived from upland cotton (Gossypium hirsutum L.) CRI36 and Egyptian cotton (G. barbadense L.) Hai7124 was used to construct a high-density genetic linkage map for quantitative trait locus (QTL) mapping. The high-density genetic map harboured 7,709 genotyping-by-sequencing (GBS)-based single nucleotide polymorphism (SNP) markers that covered 3,433.24 cM with a mean marker interval of 0.67 cM. In total, ten PH QTLs were identified and each explained 4.27-14.92% of the phenotypic variation, four of which were stable as they were mapped in at least two tests or based on best linear unbiased prediction in seven field tests. Based on functional annotation of orthologues in Arabidopsis and transcriptome data for the genes within the stable QTL regions, GhPIN3 encoding for the hormone auxin efflux carrier protein was identified as a candidate gene located in the stable QTL qPH-Dt1-1 region. A qRT-PCR analysis showed that the expression level of GhPIN3 in apical tissues was significantly higher in four short-statured cotton genotypes than that in four tall-statured cotton genotypes. Virus-induced gene silencing cotton has significantly increased PH when the expression of the GhPIN3 gene was suppressed.

QTL analysis for yield and fibre quality traits using three sets of introgression lines developed from three Gossypium hirsutum race stocks

Upland cotton (Gossypium hirsutum L.) race stocks may possess desirable traits for the genetic improvement of cotton. Quantitative trait locus (QTL) analysis can assist in uncovering new alleles from unadapted race stocks. In this study, three sets of chromosome segment introgression lines (ILs) were developed from three backcrosses (BC₃) between three race stocks, G. hirsutum races latifolium accs. TX-34 and TX-48 and punctatum acc. TX-114, as donor parents and Texas Marker-1 (TM-1) as the recurrent parent. Based on a total of 452 polymorphic simple sequence repeat (SSR) markers in BC₃F₂ genotyping, 149, 150 and 184 ILs were obtained from TM-1 × TX-34, TM-1 × TX-48 and TM-1 × TX-114, respectively. The average introgressed chromosomal segment length was 12.7 cM, and the total genetic distance was 3268 cM covering approximately 73.4% of the Upland cotton genome. The BC₃F₂, BC₃F_2:3 and BC₃F_2:4 progeny, which produced the ILs, were evaluated for yield and fibre quality traits. A total of 128 QTLs were detected, each of which explained 1.6-13.0% of the phenotypic variation. Thirty-five common QTLs related to eight traits were detected. Six QTL clusters were found on five chromosomes. Thirty-eight QTLs were previously unreported, and they may be footprints of cotton domestication. Domestication or artificial selection by humans successfully eliminated most unfavourable QTLs (21/38); however, some favourable QTLs (17/38) are not present in modern cultivars, demonstrating the importance of race stocks for improving cotton cultivars. The 26 elite ILs developed could be used to improve the yield and fibre quality components simultaneously. These results provide information on desirable QTLs for cotton improvement.

Development and use of chromosome segment substitution lines as a genetic resource for crop improvement

CSSLs are a complete library of introgression lines with chromosomal segments of usually a distant genotype in an adapted background and are valuable genetic resources for basic and applied research on improvement of complex traits. Chromosome segment substitution lines (CSSLs) are genetic stocks representing the complete genome of any genotype in the background of a cultivar as overlapping segments. Ideally, each CSSL has a single chromosome segment from the donor with a maximum recurrent parent genome recovered in the background. CSSL development program requires population-wide backcross breeding and genome-wide marker-assisted selection followed by selfing. Each line in a CSSL library has a specific marker-defined large donor segment. CSSLs are evaluated for any target phenotype to identify lines significantly different from the parental line. These CSSLs are then used to map quantitative trait loci (QTLs) or causal genes. CSSLs are valuable prebreeding tools for broadening the genetic base of existing cultivars and harnessing the genetic diversity from the wild- and distant-related species. These are resources for genetic map construction, mapping QTLs, genes or gene interactions and their functional analysis for crop improvement. In the last two decades, the utility of CSSLs in identification of novel genomic regions and QTL hot spots influencing a wide range of traits has been well demonstrated in food and commercial crops. This review presents an overview of how CSSLs are developed, their status in major crops and their use in genomic studies and gene discovery.

Identification of Introgressed Alleles Conferring High Fiber Quality Derived From Gossypium barbadense L. in Secondary Mapping Populations of G. hirsutum L

The improvement of fiber quality is an essential goal in cotton breeding. In our previous studies, several quantitative trait loci (QTLs) contributing to improved fiber quality were identified in different introgressed chromosomal regions from Sea Island cotton (Gossypium barbadense L.) in a primary introgression population (Pop. A) of upland cotton (G. hirsutum L.). In the present study, to finely map introgressed major QTLs and accurately dissect the genetic contribution of the target introgressed chromosomal segments, we backcrossed two selected recombinant inbred lines (RILs) that presented desirable high fiber quality with their high lint-yielding recurrent parent to ultimately develop two secondary mapping populations (Pop. B and Pop. C). Totals of 20 and 27 QTLs for fiber quality were detected in Pop. B and Pop. C, respectively, including four and five for fiber length, four and eight for fiber micronaire, two and four for fiber uniformity, five and four for fiber elongation, and six and four for fiber strength, respectively. Two QTLs for lint percentage were detected only in Pop. C. In addition, seven stable QTLs were identified, including two for both fiber length and fiber strength and three for fiber elongation. Five QTL clusters for fiber quality were identified in the introgressed chromosomal regions, and negative effects of these chromosomal regions on lint percentage (a major lint yield parameter) were not observed. Candidate genes with a QTL-cluster associated with fiber strength and fiber length in the introgressed region of Chr.7 were further identified. The results may be helpful for revealing the genetic basis of superior fiber quality contributed by introgressed alleles from G. barbadense. Possible strategies involving marker-assisted selection (MAS) for simultaneously improving upland cotton fiber quality and lint yield in breeding programs was also discussed.

QTL delineation for five fiber quality traits based on an intra-specific Gossypium hirsutum L. recombinant inbred line population

Gossypium hirsutum L. is the most important fiber crop worldwide and contributes to more than 95% of global cotton production. Marker-assisted selection (MAS) is an effective approach for improving fiber quality, and quantitative trait loci (QTL) mapping of fiber quality traits is important for cotton breeding. In this study, a permanent intra-specific recombinant inbred line (RIL) population containing 137 families was used for fiber quality testing. Based on a previously reported high-density genetic map with an average marker distance of 0.63 cM, 186 additive QTLs were obtained for five fiber quality traits over five consecutive years, including 39 for fiber length (FL), 36 for fiber strength (FS), 50 for fiber uniformity (FU), 33 for micronaire (MC) and 28 for fiber elongation (FE). Three stable QTLs, qMC-A4-1, qMC-D2-3 and qFS-D9-1, were detected in four datasets, and another eight stable QTLs, qMC-A4-2, qMC-D11-2, qFU-A9-1, qFU-A10-4, qFS-D11-1, qFL-D9-2, qFL-D11-1 and qFE-A3-2, were detected in three datasets. The annotated genes in these 11 stable QTLs were collected, and these genes included many transcription factors with functions during fiber development. 33 QTL coincidence regions were found, and these involved nearly half of the total QTLs. Four chromosome regions containing at least 6 QTLs were promising for fine mapping. In addition, 41 pairs of epistatic QTLs (e-QTLs) were screened, including 6 for FL, 30 for FS, 2 for FU and 3 for MC. The identification of stable QTLs adds valuable information for further QTL fine mapping and gene positional cloning for fiber quality genetic detection and provides useful markers for further molecular breeding in enhancing fiber quality.

SSR-based association mapping of fiber quality in upland cotton using an eight-way MAGIC population

The quality of fiber is significant in the upland cotton industry. As complex quantitative traits, fiber quality traits are worth studying at a genetic level. To investigate the genetic architecture of fiber quality traits, we conducted an association analysis using a multi-parent advanced generation inter-cross (MAGIC) population developed from eight parents and comprised of 960 lines. The reliable phenotypic data for six major fiber traits of the MAGIC population were collected from five environments in three locations. Phenotypic analysis showed that the MAGIC lines have a wider variation amplitude and coefficient than the founders. A total of 284 polymorphic SSR markers among eight parents screened from a high-density genetic map were used to genotype the MAGIC population. The MAGIC population showed abundant genetic variation and fast linkage disequilibrium (LD) decay (0.76 cM, r² > 0.1), which revealed the advantages of high efficiency and power in QTL exploration. Association mapping via a mixed linear model identified 52 significant loci associated with six fiber quality traits; 14 of them were mapped in reported QTL regions with fiber-related or other agronomic traits. Nine markers demonstrated the pleiotropism that controls more than two fiber traits. Furthermore, two SSR markers, BNL1231 and BNL3452, were authenticated as hotspots that were mapped with multi-traits. In addition, we provided candidate regions and screened six candidate genes for identified loci according to the LD decay distance. Our results provide valuable QTL for further genetic mapping and will facilitate marker-based breeding for fiber quality in cotton.

Inducement and identification of chromosome introgression and translocation of Gossypium australe on Gossypium hirsutum

Background

We previously reported the development of a set of Gossypium hirsutum-G. australe alien chromosome addition lines. Naturally, however, G. hirsutum-G. australe chromosome exchanges were very limited, impeding the stable transference of useful genes from G. australe (G₂G₂ genome) into the most cultivated cotton, G. hirsutum (AADD).

Results

In the present report, the pollen from a pentaploid (2n = AADDG₂) of G. hirsutum-G. australe was irradiated with seven different doses ranging from 10 to 40 Grays and used to pollinate emasculated flowers of G. hirsutum over three consecutive years. Irradiation greatly increased the genetic recombination rates of the G. hirsutum and G. australe chromosomes and a total of 107 chromosome introgression individuals in 192 GISH-negative (with no GISH signal on chromosome) survived individuals, 11 chromosome translocation individuals (containing 12 chromosome translocation events) and 67 chromosome addition individuals were obtained in 70 GISH-positive (with GISH signal(s) on chromosome(s)) survived individuals, which are invaluable for mining desirable genes from G. australe. Multicolor genomic in situ hybridization results showed that there were three types of translocation, whole arm translocation, large alien segment translocation and small alien segment translocation, and that all translocations occurred between the G₂-genome and the A-subgenome chromosomes in G. hirsutum. We also found that higher doses induced much higher rates of chromosome variation but also greatly lowered the seed viability and seedling survivability.

Conclusions

Irradiation has been successfully employed to induce chromosome introgressions and chromosome translocations and promote chromosome exchanges between cultivated and wild species. In addition, by balancing the rates of chromosome introgression and translocation to those of seed set, seed germination, and seedling rates in the M1 generation, we conclude that the dosage of 20 Grays is the most suitable. The established methodology may guide the utilization of the tertiary gene pool of Gossypium species such as G. australe in cotton breeding in the future.

Electronic supplementary material

The online version of this article (10.1186/s12864-017-4398-7) contains supplementary material, which is available to authorized users.

Identification of genes related to salt stress tolerance using intron-length polymorphic markers, association mapping and virus-induced gene silencing in cotton

Intron length polymorphisms (ILPs), a type of gene-based functional marker, could themselves be related to the particular traits. Here, we developed a genome-wide cotton ILPs based on orthologs annotation from two sequenced diploid species, A-genome Gossypium arboreum and D-genome G. raimondii. We identified 10,180 putative ILP markers from 5,021 orthologous genes. Among these, 535 ILP markers from 9 gene families related to stress were selected for experimental verification. Polymorphic rates were 72.71% between G. arboreum and G. raimondii and 36.45% between G. hirsutum acc. TM-1 and G. barbadense cv. Hai7124. Furthermore, 14 polymorphic ILP markers were detected in 264 G. hirsutum accessions. Coupled with previous simple sequence repeats (SSRs) evaluations and salt tolerance assays from the same individuals, we found a total of 25 marker-trait associations involved in nine ILPs. The nine genes, temporally named as C1 to C9, showed the various expressions in different organs and tissues, and five genes (C3, C4, C5, C7 and C9) were significantly upregulated after salt treatment. We verified that the five genes play important roles in salt tolerance. Particularly, silencing of C4 (encodes WRKY DNA-binding protein) and C9 (encodes Mitogen-activated protein kinase) can significantly enhance cotton susceptibility to salt stress.

High-density linkage map construction and QTL analysis for earliness-related traits in Gossypium hirsutum L

Background

Gossypium hirsutum L., or upland cotton, is an important renewable resource for textile fiber. To enhance understanding of the genetic basis of cotton earliness, we constructed an intra-specific recombinant inbred line population (RIL) containing 137 lines, and performed linkage map construction and quantitative trait locus (QTL) mapping.

Results

Using restriction-site associated DNA sequencing, a genetic map composed of 6,434 loci, including 6,295 single nucleotide polymorphisms and 139 simple sequence repeat loci, was developed from RIL population. This map spanned 4,071.98 cM, with an average distance of 0.63 cM between adjacent markers. A total of 247 QTLs for six earliness-related traits were detected in 6 consecutive years. In addition, 55 QTL coincidence regions representing more than 60 % of total QTLs were found on 22 chromosomes, which indicated that several earliness-related traits might be simultaneously improved. Fine-mapping of a 2-Mb region on chromosome D3 associated with five stable QTLs between Marker25958 and Marker25963 revealed that lines containing alleles derived from CCRI36 in this region exhibited smaller phenotypes and earlier maturity. One candidate gene (EMF2) was predicted and validated by quantitative real-time PCR in early-, medium- and late-maturing cultivars from 3- to 6-leaf stages, with highest expression level in early-maturing cultivar, CCRI74, lowest expression level in late-maturing cultivar, Bomian1.

Conclusions

We developed an SNP-based genetic map, and this map is the first high-density genetic map for short-season cotton and has the potential to provide deeper insights into earliness. Cotton earliness-related QTLs and QTL coincidence regions will provide useful materials for QTL fine mapping, gene positional cloning and MAS. And the gene, EMF2, is promising for further study.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-016-3269-y) contains supplementary material, which is available to authorized users.

Identification of Chromosome Segment Substitution Lines of Gossypium barbadense Introgressed in G. hirsutum and Quantitative Trait Locus Mapping for Fiber Quality and Yield Traits

Chromosome segment substitution lines MBI9804, MBI9855, MBI9752, and MBI9134, which were obtained by advanced backcrossing and continuously inbreeding from an interspecific cross between CCRI36, a cultivar of upland cotton (Gossypium hirsutum) as the recurrent parent, and Hai1, a cultivar of sea island cotton (G. barbadense) as the donor parent, were used to construct a multiple parent population of (MBI9804×MBI9855)×(MBI9752×MBI9134). The segregating generations of double-crossed F1 and F2 and F2:3 were used to map the quantitative trait locus (QTL) for fiber quality and yield-related traits. The recovery rate of the recurrent parent CCRI36 in the four parental lines was from 94.3%-96.9%. Each of the parental lines harbored 12-20 introgressed segments from Hai1across 21 chromosomes. The number of introgressed segments ranged from 1 to 27 for the individuals in the three generations, mostly from 9 to 18, which represented a genetic length of between 126 cM and 246 cM. A total of 24 QTLs controlling fiber quality and 11 QTLs controlling yield traits were detected using the three segregating generations. These QTLs were distributed across 11 chromosomes and could collectively explain 1.78%-20.27% of the observed phenotypic variations. Sixteen QTLs were consistently detected in two or more generations, four of them were for fiber yield traits and 12 were for fiber quality traits. One introgressed segment could significantly reduce both lint percentage and fiber micronaire. This study provides useful information for gene cloning and marker-assisted breeding for excellent fiber quality.

Mapping of fiber quality QTLs reveals useful variation and footprints of cotton domestication using introgression lines

Fiber quality improvement is a driving force for further cotton domestication and breeding. Here, QTLs for fiber quality were mapped in 115 introgression lines (ILs) first developed from two intraspecific populations of cultivated and feral cotton landraces. A total of 60 QTLs were found, which explained 2.03–16.85% of the phenotypic variance found in fiber quality traits. A total of 36 markers were associated with five fiber traits, 33 of which were found to be associated with QTLs in multiple environments. In addition, nine pairs of common QTLs were identified; namely, one pair of QTLs for fiber elongation, three pairs for fiber length, three pairs for fiber strength and two pairs for micronaire (qMICs). All common QTLs had additive effects in the same direction in both IL populations. We also found five QTL clusters, allowing cotton breeders to focus their efforts on regions of QTLs with the highest percentages of phenotypic variance. Our results also reveal footprints of domestication; for example, fourteen QTLs with positive effects were found to have remained in modern cultivars during domestication, and two negative qMICs that had never been reported before were found, suggesting that the qMICs regions may be eliminated during artificial selection.

Plant Fibre: Molecular Structure and Biomechanical Properties, of a Complex Living Material, Influencing Its Deconstruction towards a Biobased Composite

Plant cell walls form an organic complex composite material that fulfils various functions. The hierarchical structure of this material is generated from the integration of its elementary components. This review provides an overview of wood as a composite material followed by its deconstruction into fibres that can then be incorporated into biobased composites. Firstly, the fibres are defined, and their various origins are discussed. Then, the organisation of cell walls and their components are described. The emphasis is on the molecular interactions of the cellulose microfibrils, lignin and hemicelluloses in planta. Hemicelluloses of diverse species and cell walls are described. Details of their organisation in the primary cell wall are provided, as understanding of the role of hemicellulose has recently evolved and is likely to affect our perception and future study of their secondary cell wall homologs. The importance of the presence of water on wood mechanical properties is also discussed. These sections provide the basis for understanding the molecular arrangements and interactions of the components and how they influence changes in fibre properties once isolated. A range of pulping processes can be used to individualise wood fibres, but these can cause damage to the fibres. Therefore, issues relating to fibre production are discussed along with the dispersion of wood fibres during extrusion. The final section explores various ways to improve fibres obtained from wood.

Genome-wide SSR-based association mapping for fiber quality in nation-wide upland cotton inbreed cultivars in China

Background

Since upland cotton was introduced into China during the 1920s–1950s, hundreds of inbreed cultivars have been developed. To explore the molecular diversity, population structure and elite alleles, 503 inbred cultivars developed in China and some foreign cultivars from the United States and the Soviet Union were collected and analyzed by 494 genome-wide SSRs (Simple Sequence Repeats).

Methods

Four hundred and ninety-four pairs of SSRs with high polymorphism and uniform distribution on 26 chromosomes were used to scan polymorphisms in 503 nation-wide upland cottons. The programming language R was used to make boxplots for the phenotypic traits in different environments. Molecular marker data and 6 fiber quality traits were analyzed by the method of MLM (mixed linear model) (P + G + Q + K) in the TASSEL software package on the basis of the population structure and linkage disequilibrium analysis. The loci of elite allelic variation and typical materials carrying elite alleles were identified based on phenotypic effect values.

Results

A total of 179 markers were polymorphic and generated 426 allele loci; the population based on molecular diversity was classified into seven subpopulations corresponding to pedigree origin, ecological and geographical distribution. The attenuation distance of linkage disequilibrium dropped significantly up to 0–5 cM. Association mapping for fiber quality showed that 216 marker loci were associated with fiber quality traits (P < 0.05) explaining 0.58 % ~ 5.12 % of the phenotypic variation, with an average of 2.70 %. Thirteen marker loci were coincident with other studies, and three were detected for the same trait. Seven quantitative trait loci were related to known genes in fiber development. Based on phenotypic effects, 48 typical materials that contained the elite allele loci related to fiber quality traits were identified and are widely used in practical breeding.

Conclusions

The molecular diversity and population structure of 503 nation-wide upland cottons in China were evaluated by 494 genome-wide SSRs, and association mapping for fiber quality revealed known and novel elite alleles. The molecular diversity provides a guide for parental mating in cotton breeding, and the association mapping results will aid in the fine-mapping genes related to fiber quality traits and facilitate further studies on candidate genes.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-016-2662-x) contains supplementary material, which is available to authorized users.

A BIL Population Derived from G. hirsutum and G. barbadense Provides a Resource for Cotton Genetics and Breeding

To provide a resource for cotton genetics and breeding, an interspecific hybridization between Gossypium hirsutum cv. Emian22 and G. barbadense acc. 3–79 was made. A population of 54 BILs (backcross inbred lines, BC₁F₈) was developed with the aim of transferring G. barbadense genes into G. hirsutum in order to genetically analyze these genes’ function in a G. hirsutum background and create new germplasms for breeding. Preliminary investigation of the morphological traits showed that the BILs had diverse variations in plant architecture, seed size, and fuzz color; the related traits of yield and fiber quality evaluated in 4 environments also showed abundant phenotypic variation. In order to explore the molecular diversity of the BIL population, 446 SSR markers selected at an average genetic distance of 10 cM from our interspecific linkage map were used to genotype the BIL population. A total of 393 polymorphic loci accounting for 84.4% MAF (major allele frequency) > 0.05 and 922 allele loci were detected, and the Shannon diversity index (I) was 0.417 per locus. The average introgression segment length was 16.24 cM, and an average of 29.53 segments were introgressed in each BIL line with an average background recovery of 79.8%. QTL mapping revealed 58 QTL associated with fiber quality and yield traits, and 47 favored alleles derived from the donor parent were discovered. This study demonstrated that the interspecific BIL population was enriched with much phenotypic and molecular variation which could be a resource for cotton genetics and breeding.

Evaluation of cotton leaf curl virus resistance in BC1, BC2, and BC3 progenies from an interspecific cross between Gossypium arboreum and Gossypium hirsutum

Cotton leaf curl virus disease (CLCuD) is an important constraint to cotton production. The resistance of G. arboreum to this devastating disease is well documented. In the present investigation, we explored the possibility of transferring genes for resistance to CLCuD from G. arboreum (2n = 26) cv 15-Mollisoni into G. hirsutum (2n = 52) cv CRSM-38 through conventional breeding. We investigated the cytology of the BC₁ to BC₃ progenies of direct and reciprocal crosses of G. arboreum and G. hirsutum and evaluated their resistance to CLCuD. The F₁ progenies were completely resistant to this disease, while a decrease in resistance was observed in all backcross generations. As backcrossing progressed, the disease incidence increased in BC₁ (1.7–2.0%), BC₂ (1.8–4.0%), and BC₃ (4.2–7.0%). However, the disease incidence was much lower than that of the check variety CIM-496, with a CLCuD incidence of 96%. Additionally, the disease incidence percentage was lower in the direct cross 2(G. arboreum)×G. hirsutum than in that of G. hirsutum×G. arboreum. Phenotypic resemblance of BC₁ ∼BC₃ progenies to G. arboreum confirmed the success of cross between the two species. Cytological studies of CLCuD-resistant plants revealed that the frequency of univalents and multivalents was high in BC₁, with sterile or partially fertile plants, but low in BC₂ (in both combinations), with shy bearing plants. In BC₃, most of the plants exhibited normal bearing ability due to the high frequency of chromosome associations (bivalents). The assessment of CLCuD through grafting showed that the BC₁ to BC₃ progenies were highly resistant to this disease. Thus, this study successfully demonstrates the possibility of introgressing CLCuD resistance genes from G. arboreum to G. hirsutum.

Mapping genomic loci for cotton plant architecture, yield components, and fiber properties in an interspecific (Gossypium hirsutum L. × G. barbadense L.) RIL population

A quantitative trait locus (QTL) mapping was conducted to better understand the genetic control of plant architecture (PA), yield components (YC), and fiber properties (FP) in the two cultivated tetraploid species of cotton (Gossypium hirsutum L. and G. barbadense L.). One hundred and fifty-nine genomic regions were identified on a saturated genetic map of more than 2,500 SSR and SNP markers, constructed with an interspecific recombinant inbred line (RIL) population derived from the genetic standards of the respective cotton species (G. hirsutum acc. TM-1 × G. barbadense acc. 3-79). Using the single nonparametric and MQM QTL model mapping procedures, we detected 428 putative loci in the 159 genomic regions that confer 24 cotton traits in three diverse production environments [College Station F&B Road (FB), TX; Brazos Bottom (BB), TX; and Shafter (SH), CA]. These putative QTL loci included 25 loci for PA, 60 for YC, and 343 for FP, of which 3, 12, and 60, respectively, were strongly associated with the traits (LOD score ≥ 3.0). Approximately 17.7 % of the PA putative QTL, 32.9 % of the YC QTL, and 48.3 % of the FP QTL had trait associations under multiple environments. The At subgenome (chromosomes 1-13) contributed 72.7 % of loci for PA, 46.2 % for YC, and 50.4 % for FP while the Dt subgenome (chromosomes 14-26) contributed 27.3 % of loci for PA, 53.8 % for YC, and 49.6 % for FP. The data obtained from this study augment prior evidence of QTL clusters or gene islands for specific traits or biological functions existing in several non-homoeologous cotton chromosomes. DNA markers identified in the 159 genomic regions will facilitate further dissection of genetic factors underlying these important traits and marker-assisted selection in cotton.