Locking plate versus non-locking plate in open-wedge high tibial osteotomy: a meta-analysis

Clinical outcome after open-wedge high tibial osteotomy: comparison of double-triangle locking compression plate (DT-LCP) and T-shaped locking compression plate (T-LCP)

BACKGROUND

The objective of this study was to compare the clinical outcomes of two internal fixation methods for high tibial osteotomy (HTO): double-triangle locking compression plate (DT-LCP) and T-shaped locking compression plate (T-LCP).

METHODS

202 adult patients in our hospital between January 2018 and December 2021 were included and followed up for at least one year: group 1(DT-LCP, 98 patients) and group 2 (T-LCP, 104 patients). Detailed information on demographics, preoperative and postoperative follow-up, surgical procedures, and complications were collected. The information of the International Knee Documentation Committee Knee Evaluation Form (IKDC), Knee Injury and Osteoarthritis Outcome Score (KOOS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) were collected before surgery and at the last follow-up.

RESULTS

A total of 202 patients were included in the per-protocol analysis. No significant difference was found in terms of demographic data between groups, except for age and BMI. Clinically relevant improvements in knee pain were reached up to last follow-up after the operation in both groups. The mean pain scores (KOOS, WOMAC) at the final follow-up were significantly higher among group 1 compared to group 2 (P = 0.040 and P = 0.023). Furthermore, the DT-LCP internal fixation exerted more excellent effects on other symptoms, function and quality of life than T-LCP internal fixation.

CONCLUSIONS

Our study demonstrated that DT-LCP provided better clinical performance due to its implant irritant pain, compared with T-LCP. Thus, DT-LCP is a feasible alternative for the fixation of OW-HTO.

Implant Removal After Medial Opening Wedge High Tibial Osteotomy Provides Implant-Related Pain Relief and Functional Improvement

PURPOSE

To investigate the incidence of implant-related pain after medial opening wedge high tibial osteotomy (MOWHTO) using a locking plate, to determine whether implant removal provides pain relief and functional improvement, and to evaluate bone healing and loss of correction after implant removal.

METHODS

Between March 2014 and September 2017, MOWHTO was performed without bone graft. The inclusion criteria were patients who underwent implant removal after MOWHTO and were followed up for a minimum of 2 years. Patients were evaluated for implant removal 1 and 2 years after surgery. Clinical and functional evaluations were conducted to investigate implant-related pain using the visual analog scale, Lysholm score, and Tegner score. The radiographic indices measured were the gap-filling rate, weightbearing line (WBL) ratio, hip-knee-ankle angle (HKAA), medial proximal tibial angle (MPTA), and posterior tibial slope angle (PTSA).

RESULTS

A total of 55 patients were enrolled. Fifty-one (92.7%) patients experienced implant-related pain prior to implant removal, with 43 and 8 patients reporting mild pain and moderate pain, respectively. At 1 and 2 years after implant removal, mild pain occurred in 6 (10.9%) and 5 (9.1%) patients, respectively. The remaining patients reported no implant-related pain. Prior to implant removal and 1 year after implant removal, the Lysholm score improved from 77.0 ± 5.6 to 86.8 ± 5.7 (P < .001), and the Tegner score improved from 3.3 ± 1.2 to 3.9 ± 1.3 (P < .001). The mean gap-filling rate was 84.4% ± 9.6% at implant removal, and it significantly increased to 93.7% ± 5.4% and 97.4% ± 2.6% at 1 and 2 years after implant removal, respectively (P < .001). For the WBL ratio, HKAA, MPTA, and PTSA, no statistically significant differences were found after implant removal.

CONCLUSIONS

The incidence of implant-related pain after MOWHTO using the medial proximal tibial locking plate was high. Implant removal provides pain relief and functional improvement (met minimal clinically important differences). Even after implant removal, bone healing progressed gradually without a loss of correction in all patients.

LEVEL OF EVIDENCE

Level IV, case series.

Biomechanical comparisons of plate placement for medial tibial plateau fractures (Schatzker type IV): A biomechanical study using porcine tibias

INTRODUCTION

Biomechanical studies on medial tibial plateau fractures (MTPFs) (Schatzker classification type IV) are currently few, while studies using locking plates (LPs) placed on medial proximal tibias are unavailable. Hence, we compared the biomechanical properties of plate osteosynthesis at the medial and anteromedial placements using large- and small-fragment LPs in porcine bones.

MATERIALS AND METHODS

MTPFs were internally fixed using LPs on 40 porcine tibias. Specimens were equally divided into four groups: medial placement using a large-fragment LP (LPs for the medial (LM) group), anteromedial placement using a large-fragment LP (LAM group), medial placement using a small-fragment LP (SM group), and anteromedial placement using a small-fragment LP (SAM group). The translation patterns of the constructs in each group were examined by cycling loading test (displacement and translation along the mechanical axis at 10-100, 100-500, 500-1000, 1000-1500, and 1500-2000 cycles). Then, articular gaps and step-off changes after 2000 cycles were compared among the four groups.

RESULTS

One-way analysis of variance (ANOVA) revealed no significant differences in displacement and translation during cyclic loading. One-way ANOVA followed by post hoc analysis revealed that the anterior gap was lower in LPs for the medial (LM) than in SM (P = 0.029) and SAM (P = 0.0026). The central gap was also lower in LM than in SM (P = 0.042) and SAM (P < 0.001), and it was lower in LAM than in SAM (P = 0.047). Likewise, the posterior gap was lower in LM than in LAM (P = 0.025) and SAM (P < 0.001). Furthermore, the central step-off of SAM was higher than that of LM, LAM, and SM (P < 0.001, P = 0.0014, and P = 0.0077, respectively). The posterior step-off was lower in LM than in SAM and LAM (P = 0.037 and P < 0.001), and it was also lower in SM than in SAM (P = 0.0082).

CONCLUSION

Medial LP placement for MTPFs in porcine bones resulted in significantly lower posterior step-offs after cyclic loading than anteromedial placement, and large-fragment LPs for MTPFs caused significantly lower fracture gaps in the central articular after cyclic loading than small-fragment LPs.

Lateral Distance From the Osteotomy Hinge Point to the Tibial Cortex Is Associated With Lateral Hinge Fracture Type and Fracture Occurrence Time After Medial Open-Wedge High Tibial Osteotomy

PURPOSE

To verify whether the distance from the hinge point to the tibial cortex affects the occurrence time and characteristics of the lateral hinge fracture (LHF) in medial open-wedge high tibial osteotomy.

METHODS

We retrospectively reviewed 171 knees in 171 patients (121 women, 50 men; mean age, 53.9 years; range, 36-67 years) who had undergone medial open-wedge high tibial osteotomy with locking plate fixation between January 2011 and December 2020. Osteotomy hinge point and LHFs were identified on intraoperative fluoroscopy and immediate postoperative radiographs. LHF type was classified as suggested by Takeuchi et al. Acute fracture was defined as a fracture that occurred during surgery, and delayed fracture was defined as a fracture observed after 1 month postoperatively. The nearest distances from osteotomy hinge point to lateral, distal, and proximal cortex were measured on postoperative radiographs. We compared the distance between the different types and between acute and delayed LHFs.

RESULTS

There were 55 LHFs (32%) (type I, 40 knees; type II, 14 knees; type III, 1 knee) that occurred acutely in 41 knees and were found as delayed fractures in 14 knees. The patient demographics were not significantly different between non-LHFs and each type of LHFs. Proximal and distal distances were not statistically different among fracture types and between occurrence times. However, lateral distances were significantly shorter in type I LHFs (6.2 ± 1.8 mm) and longer in type II LHFs (9.3 ± 2.3 mm) than in non-LHFs (7.1 ± 2.7 mm) (P = .020 and .004, respectively). The lateral cortical distances were also different between acute LHFs (6.4 ± 1.9 mm) and delayed LHF (9.0 ± 2.7 mm) (P < .001). In the case of fracture type, the frequency of type I decreases with increase in the lateral distance, whereas that of type II increases with increase in the lateral cortical distance. In acute fracture, type I was dominant (85.4%), whereas in delayed fracture, type II was dominant (57.2%).

CONCLUSIONS

The lateral cortical distance from the hinge point was significantly associated with LHF occurrence. Shorter distance increased the risk for acute type I LHF, whereas longer distance increased the risk for delayed type II LHFs.

LEVEL OF EVIDENCE

Level III, retrospective comparative prognostic trial.

Cartilage Degeneration of the Lateral Compartment of the Knee at Second-Look Arthroscopy Is Associated With Deterioration of 10-Year Clinical Outcomes After Opening-Wedge High Tibial Osteotomy

PURPOSE

To identify the arthroscopic findings associated with deterioration of 10-year clinical outcomes after opening-wedge high tibial osteotomy (OWHTO) in patients with knee osteoarthritis.

METHODS

A total of 114 consecutive knees of 91 patients with knee osteoarthritis who underwent OWHTO between 2007 and 2011 were retrospectively reviewed. Of these patients, those who underwent second-look arthroscopy and were followed up for a minimum of 10 years were enrolled. The Knee Society Score (KSS) and hip-knee-ankle angle were assessed. Cartilage status was graded at the time of osteotomy (first look) and plate removal (second look) according to the International Cartilage Repair Society (ICRS) grading system. The KSS knee subscale score and function subscale score were assessed separately, and on the basis of the changes in each of these scores from 1 to 10 years postoperatively and the minimal clinically important difference (MCID), the patients were divided into 2 groups: deteriorated (deterioration of score ≥ MCID) and non-deteriorated (deterioration of score < MCID).

RESULTS

Sixty-nine knees were included in this study. The mean knee score improved continuously from 48.7 ± 11.3 preoperatively to 86.8 ± 10.3 at 1 year (P < .001), 87.5 ± 9.9 at 5 years (P < .001), and 86.5 ± 10.5 at 10 years (P < .001) postoperatively. The mean function score also improved continuously from 62.5 ± 12.1 preoperatively to 90.7 ± 12.9 at 1 year (P < .001), 91.6 ± 12.1 at 5 years (P < .001), and 88.5 ± 13.1 at 10 years (P < .001) postoperatively. Three knees underwent conversion to total knee arthroplasty within 10 years postoperatively. The deteriorated KSS group showed significantly progressed ICRS grades in the lateral compartment compared with the non-deteriorated KSS group. The ICRS grade in the lateral compartment at second-look arthroscopy was identified as the only significant factor associated with both knee score deterioration (odds ratio, 4.89; P = .03) and function score deterioration (odds ratio, 3.91; P = .03) on multivariable logistic regression analysis.

CONCLUSIONS

The presence of cartilage degeneration of the lateral compartment of the knee at second-look arthroscopy is associated with deterioration of long-term clinical outcomes after OWHTO.

LEVEL OF EVIDENCE

Level IV, therapeutic case series.

Clinical Outcome after Medial Open-Wedge High Tibial Osteotomy: Comparison of Two Angular Stable Locking Plates—TomoFix™ versus LOQTEQ® HTO Plate

This study evaluated bony healing and clinical results after medial open-wedge HTO to compare the outcome of the LOQTEQ® HTO plate and the TomoFix™ internal plate fixator. A prospective, non-randomised, comparative study was undertaken. The same surgical technique for the medial open-wedge HTO was used in two treatment groups. In Group 1, the TomoFix™ implant was used for osteosynthesis, and, in Group 2, the LOQTEQ® HTO plate was used. All patients were examined before surgery (T0) and then at 12 months (T1) and at 24 months (T2) postoperatively. The primary outcome measure was the KOOS pain subscore. The secondary outcome criteria were other KOOS subscales, the Tegner score, radiological healing (RUST), and incision length. The KOOS pain subscale and the other KOOS subscores increased significantly in both groups from T0 to T1 and T2 without a significant group difference at each timepoint. The activity measured with the Tegner scale increased significantly from T0 to T2 without a significant group difference. No radiological signs of implant failure were observed in any case at the one-year X-ray, and no patient fulfilled the criteria for non-union. There was no significant difference in the frequency of adverse effects between the two treatment groups. The length of the incision was significantly shorter in the LOQTEQ® HTO group than in the TomoFix™ group. The results of this study show that patient-related outcome scores (KOOS, Tegner) increased after medial open-wedge HTO. There was no difference in clinical outcome or radiological healing between the treatment groups. Both plates are suitable for the osteosynthesis of open-wedge HTO.

Comparing Unicompartmental Knee Arthroplasty and High Tibial Osteotomy for Isolated Medial Compartment Knee Osteoarthritis

»

Both unicompartmental knee arthroplasty (UKA) and high tibial osteotomy (HTO) allow for compartment-specific intervention on an arthritic knee joint that preserves bone stock and native soft tissue compared to a total knee arthroplasty (TKA). Both operations give a more natural feeling with native proprioception compared with a TKA.

»

HTO is better suited in patients who are younger (<55 years-of-age), have a body mass index (BMI) <30 kg/m2, high activity requirements, mechanical malalignment, asymmetric varus, isolated anterior cruciate ligament insufficiency, need for multiplanar correction, and a preference for joint preserving interventions. Recent data suggest that age (>55 years-of-age) should not solely contraindicate a HTO.

»

UKA may be chosen in patients who are older (>55 years-of-age), low activity requirements, have a BMI <40 kg/m2, severe osteoarthritis with significant joint space narrowing, acceptable coronal alignment, symmetric varus, and patient preference for arthroplasty.

Anteromedial plating without filling the gap in open wedge high tibial osteotomy may increase the risk of screw breakage, which can be reduced by medial plating and bone-substitute insertion

BACKGROUND

Open wedge high tibial osteotomy (OWHTO) brings new complications such as screw breakages with or without correction loss and time-dependent increased posterior tibial slopes (PTS) due to the opening gap. For preventive purposes, we changed our OWHTO procedure from anteromedial plating without filling the gap (non-grafted group, n = 40, 2009-2012) to medial plating with bone-substitute insertion (grafted group, n = 45, 2012-2015). The objectives of this study were to evaluate the complication patterns and the effects of the modifications.

METHODS

Patients undergoing OWHTO with TomoFix plates were included in this retrospective study. Demographics, clinical outcomes (flexion range and Japanese Orthopaedic Association score) and radiological outcomes (femorotibial angle) were assessed in both groups pre-operatively and 2-years postoperatively. The plate installation angle [PIA] and screw insertion depth [SID] were measured on computed tomographic slices at 6 months. PIA/SID was defined as the angle between the tibial anteroposterior axis and plate-width axis/the distance between the proximal screw tip and the proximal tibiofibular joint. The non-grafted group was further divided into complication and non-complication subgroups. Screw breakages were assessed during plate removal (1.5-2.5 years postoperatively).

RESULTS

There were no differences in baseline characteristics or radiological/clinical outcomes between the non-grafted and grafted groups. There were 0 and 11 complications in the grafted and non-grafted groups, respectively. Complications included 7 screw breakages, 4 correction losses, and 5 time-dependent increased PTS with some overlaps. PIA and SID were significantly lower (p < 0.001) and higher (p < 0.001), respectively, in the grafted group and significantly lower (p = 0.018) and higher (p = 0.040), respectively, in the non-complication subgroup within the non-grafted group. The cutoff value of PIA for complications was calculated at 48.0°.

CONCLUSIONS

Medial plating OWHTO (PIA<48°) using bone-substitute with deeper screw insertion reinforces the opening gap for better angular stability compared with anteromedial plating without bone-substitute.

Femoral-varus tibial-valgus osteotomy (FVTVO) for neutrally-aligned knee osteoarthritis with severe joint line obliquity enables return to sports activities: A case series study

Background

Re-alignment surgeries for uni-compartmental knee osteoarthritis, such as high tibial osteotomy (HTO) for varus knees or distal femoral osteotomy (DFO) for valgus knees, are recognized as standard strategies. However, the treatment strategy has not been established for patients with a neutrally-aligned osteoarthritic knee with severe joint line obliquity (JLO) owing to the combination of a valgus femur and a varus tibia; i.e., type II coronal plane alignment of the knee (CPAK). total knee arthroplasty (TKA) can be an option for CPAK type II-aligned osteoarthritis in older inactive patients. Here, we hypothesized that joint line horizontalization by femoral-varus tibial-valgus osteotomy (FVTVO), which may reduce the shear stress induced by JLO, could be a treatment option for CPAK type II-aligned osteoarthritis in young active patients who wish to return to sports (RTS) activity. Our aim in this study was to evaluate the postoperative results of FVTVO with RTS.

Methods

Our indications for FVTVO are as follows: JLO >5°; mechanical medial proximal tibial angle (mMPTA) < 87°; mechanical lateral distal femoral angle (mLDFA) < 87°; typical osteoarthritis patterns for CPAK type II on magnetic resonance images, namely osteoarthritic change of the lateral tibial spine, medial slip of the femur, and/or lateral meniscal extrusion from the lateral femoral condyle; and flexion contracture <10°. We enrolled patients who wished to RTS and who had a pre-symptom Tegner score ≥5 and had completed at least a 1-year follow-up. For FVTVO, closed-wedge DFO was performed in all femurs; both closed-wedge HTO and open-wedge HTO were used in the tibia, depending on the situation. Range of motion exercises began on the first postoperative day, and full weight-bearing was permitted 6 weeks postoperatively. Jogging was permitted 3 months postoperatively after confirming bone union, and patients could gradually return to their sports activity 6-12 months' postoperatively. The Japanese Orthopaedic Association (JOA) score and knee flexion range were assessed preoperatively and at the last follow-up. Tegner activity scale scores were assessed presymptom, preoperatively, and at the last follow-up. The hip-knee-ankle (HKA) angle, JLO, mMPTA, and mLDFA were evaluated radiologically, and meniscal extrusions, osteoarthritic change, and/or bone marrow edema were assessed on magnetic resonance images.

Results

One man and two women were included in this case series. Two were competitive athletes and one was a mountain climber. The patients' ages were 69, 46, and 57 years (Case 1, 2, and 3, respectively). All patients' CPAK type was converted from type II to type V; i.e., neutral-aligned knee with a neutral joint line, postoperatively. All patients returned to their presymptom sports activity level by the final follow-up. The presymptom/preoperative/final follow-up Tegner scale in Case 1, 2, and 3 were 6/1/6, 5/2/5, and 7/3/7, respectively.

Conclusion

Joint line horizontalization by FVTVO for patients with a neutral-aligned knee with severe JLO provided highly satisfactory clinical results and successfully led to RTS.

Higher activity level after opening wedge high tibial osteotomy compared to medial unicompartimental knee arthroplasty in a selected cohort of advanced age: A propensity score-matched analysis

BACKGROUND

High tibial osteotomy (HTO) and medial unicompartmental knee arthroplasty (mUKA) are accepted treatment for medial knee osteoarthritis (OA). Patients often present meeting indications for both procedures. The purpose of this study was to compare results after MOWHTO and UKA in a matched population of patients older than 50 years.

METHOD

A retrospective analysis searching for patients older than 50 years meeting indication both for UKA and MOWHTO was performed. A propensity score matching (PSM) based on demographics and clinical data was performed. Tegner activity scale (TAS), Lysholm knee score (LKS) and numeric rating scale for pain (NRS) were recorded prospectively prior to surgery, at 6 months and after a minimum of 4 years.

RESULTS

64 UKA and 71 MOWHTO were found. Mean follow up was similar (54,05 ± 4,80 and 52,62 ± 3,91). A significant improvement was found in both groups for all outcomes at 6 months and at final follow up. PSM yielded 29 pairs. Patients treated with MOWHTO showed superior TAS scores at 6 months (3,41 ± 0,50 vs 3,10 ± 0,56; p < 0,05) and at final follow up (3,83 ± 0,80 vs 3,27 ± 0,59; p < 0,005). NRS and LKS were comparable between groups.

CONCLUSIONS

MOWHTO performed using an open wedge technique, with locking plate and a fast rehabilitation protocol guaranteed higher level of activity than UKA in patients older than 50 years. Difference is significant already at 6 months and last longer than 4 years.

LEVEL OF EVIDENCE

III.

Ankle-Angle-Adjusting Fibular Osteotomy in Closed Wedge High Tibial Osteotomy

Closed-wedge high tibial osteotomy (CWHTO) may be carried out to realign the knee in patients with knee osteoarthritis who do not meet the criteria for open-wedge high tibial osteotomy or total knee arthroplasty. The procedure involves both fibular and tibial osteotomy, and care is needed to prevent peroneal nerve and vessel injury during fibular osteotomy. Notably, use of a tourniquet may mask the development of hematomas or aneurysms until after surgery. We developed a 3-step ankle-angle-adjusting (triple-A) technique to relax the muscles, allowing easy retraction of the peroneal vessels. Crucially, the procedure does not require a tourniquet, thus allowing bleeding to be detected and stopped during surgery. The process involves adjusting the ankle angle by plantar-flexion and applying varus stress to highlight the tension difference between the lateral and posterior compartments; plantar-flexion of the great toe to loosen the flexor hallucis longus muscle, thus exposing the fibular posterior aspect; and valgus stress to loosen the peroneus longus muscle. The muscles can then be retracted sufficiently to allow distal and proximal osteotomies to be performed, and any bleeding can be detected and resolved before wound closure. This technique may improve the ease and safety of fibular osteotomy in patients undergoing CWHTO.

The effect of the distance between the end point of the osteotomy and the lateral cortex on the lateral cortical hinge fracture in medial opening-wedge high tibial osteotomy

Background The purpose of this study was to compare the effects of different distances between the end point of the osteotomy and the lateral cortex on the risk of lateral cortical fracture in the medial opening-wedge high tibial osteotomy (MOWHTO) procedure. Methods Eighteen synthetic tibia models were used. Saw cuts were performed on the test models (n=6 for all groups). Wedge gap distance and wedge opening load were evaluated using compression tests. Findings The mean maximum gap distance without a lateral cortical fracture was 19.90 mm in Group 5, 15.49 mm in Group 10, and 11.23 mm in Group 15. The differences between Group 5 and Group 10, Group 5 and Group 15, and Group 10 and Group 15 were statistically significant. The mean load just before the fracture was 13.24 N in Group 5, 18.31 N in Group 10, and 26.16 N in Group 15. The difference between Group 5 and Group 15 was statistically significant. No significant difference was observed between Group 10 and both Group 5 and Group 15. Interpretation As the end point of the osteotomy is brought gradually closer to the lateral cortex, wider gaps can be opened without a lateral cortical fracture. Thus, higher angle corrections can be achieved more safely by bringing the end point of the osteotomy closer to the lateral cortex, which should be preferred to reduce the risk of a lateral cortical hinge fracture during the MOWHTO procedure, from a clinical viewpoint.

Improved Accuracy of Coronal Alignment Can Be Attained Using 3D-Printed Patient-Specific Instrumentation for Knee Osteotomies: A Systematic Review of Level III and IV Studies

PURPOSE

To evaluate the accuracy and precision of postoperative coronal plane alignment using 3D-printed patient-specific instrumentation (PSI) in the setting of proximal tibial or distal femoral osteotomies.

METHODS

A systematic review evaluating the accuracy of 3D-printed PSI for coronal plane alignment correcting knee osteotomies was performed. The primary outcomes were accuracy of coronal plane limb alignment correction and number of correction outliers. Secondary variables were duration of surgery, number of intraoperative fluoroscopic images, complications, cost, and clinical outcomes (as applicable).

RESULTS

Ninety-three studies were identified, and 14 were included in the final analysis. Overall, mean postoperative deviation from target correction ranged from 0.3° to 1° for all studies using hip-knee angle measurements and 2.3% to 4.9% for all studies using weight-bearing line measurements. The incidence of correction outliers was assessed in 8 total studies and ranged from 0 to 25% (total n = 10 knees) of patients corrected with 3D-printed PSI. Osteotomies performed with 3D-printed cutting guides or wedges demonstrated significantly shorter operative times (P < .05) and fewer intraoperative fluoroscopic images (P < .05) than control groups in four case control studies.

CONCLUSION

Patients undergoing distal femoral osteotomy or proximal tibial osteotomy procedures with 3D-printed patient-specific cutting guides and wedges had highly accurate coronal plane alignment with a low rate of outliers. Patients treated with 3D printed PSI also demonstrated significantly shorter operative times and decreased intraoperative fluoroscopy when compared to conventional techniques.

LEVEL OF EVIDENCE

Level IV, systematic review of Level III-IV studies.

Chinese Clinical Practice Guidelines in Treating Knee Osteoarthritis by Periarticular Knee Osteotomy

Unicompartmental knee osteoarthritis (UKOA) is the early stage of knee joint degeneration, which is characterized by unicompartmental degeneration and mostly occurs in medial compartment. Pain and limited motion are main symptoms, which affect patients' life quality. Periarticular knee osteotomy (PKO) for lower extremity alignment correction is an effective treatment for UKOA with abnormal alignment, which could relieve pain and improve joint function by adjusting lower extremity alignment. At present, no clinical guidelines are available for the treatment of UKOA by PKO for lower extremity alignment correction. Experts from the Clinical New Technology Application Committee of the Chinese Hospital Association, Joint Surgery Study Group of the Chinese Orthopaedic Association of the Chinese Medical Association, and Osteoarthritis Study Group of the Chinese Association of Orthopaedic Surgeons of the Chinese Medical Doctor Association formulated these guidelines. The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) grading system and the Reporting Items for Practice Guidelines in Healthcare (RIGHT) were adopted to select 25 most concerning questions. Finally, 25 recommendations were formulated through evidence retrieval, evidence quality evaluation, and the determination of directions and strength of recommendations. Recommendation items 1-5 are indications and contraindications for PKO for lower extremity alignment correction, items 6-21 are surgical methods and principles, item 22 describes 3D printing corrective osteotomy technique, and items 23-25 address the perioperative period, follow-up management, and other content. These guidelines are designed to improve the normalization and standardization of KOA treatment by PKO for lower extremity alignment correction.

[Osteotomy close to the knee joint in adults]

Osteotomy close to the knee joint in cases of axial deformities or in the context of corrective interventions is still an elementary component of the spectrum of orthopedic surgery. The precise localization and analysis of the pathology are crucial in order to restore approximate physiological loading conditions by means of a suitable osteotomy procedure. Thus, above all, the medial open-wedge tibial osteotomy has become established as a standard procedure for the treatment of knee osteoarthritis caused by extra-articular tibial varus deformity. Furthermore, corrective osteotomy of the sagittal axis of the tibia and of the distal femur also show good long-term results when the indications are correctly interpreted. The osteotomies described in this article are corrections that should be performed after careful consideration of the biological and mechanical aspects. Correct planning, attention to risk factors and the surgical technique are the main factors that determine the long-term success of the procedure.

Bone healing on serial plain radiographs occurs slowly but adequately after medial opening wedge high tibial osteotomy without bone graft

PURPOSE

The purpose of this study was to prospectively investigate osteotomy gap filling rates on serial plain radiographs, and to evaluate whether alignment correction is maintained after medial opening wedge high tibial osteotomy (MOWHTO) using a locking plate without bone graft.

METHODS

Between March 2014 and June 2017, MOWHTO was performed without bone graft regardless of gap size. Radiographs were taken preoperatively, postoperatively, at 1, 3, 6, 12, 18, and 24 months after surgery. Radiographic examinations included a weight bearing long-standing anteroposterior (AP) view of the whole lower extremity, as well as, the AP, lateral, and both oblique views of the knee. Bone healing was measured on the medial oblique view of the knee. The postoperative alignment correction and its maintenance were assessed using the three radiologic parameters of the weight-bearing line (WBL) ratio, the hip-knee-ankle angle (HKAA), and the medial proximal tibial angle (MPTA) on the weight-bearing long-standing AP view of the lower extremity.

RESULTS

Fifty-two consecutive patients underwent MOWHTO, but three patients failed to follow-up for more than 24 months. A total of 49 patients were assessed in this study. The median opening gap height was 10.0 mm (IQR, 8.0-12.0; range, 7-20). On immediate post-operative radiographs, the mean gap filling was 31.4 ± 3.6%. After 1, 3, 6, 12, 18, and 24 months, the mean gap filling rates increased to 38.7 ± 4.4%, 51.4 ± 6.6%, 66.5 ± 5.1%, 84.8 ± 7.0%, 92.4 ± 5.6%, and 97.8 ± 2.3%, respectively. Statistical differences were observed between all the follow-up evaluations (P < 0.001). Statistical differences in the WBL ratio, HKAA, and MPTA were observed between preoperatively and 1 month after surgery (P < 0.001). The mean PTSA increased significantly from preoperatively to postoperatively (P < 0.001). However, no statistical differences were found between the post-operative follow-up radiographs performed for these four values.

CONCLUSION

MOWHTO using a locking plate without bone graft achieved at least 90% bone healing and had no loss in correction at 2 years postoperatively.

LEVEL OF EVIDENCE

III.

Reinforcement strategy for medial open-wedge high tibial osteotomy: a finite element evaluation of the additional opposite screw technique and bone grafts

BACKGROUND AND OBJECTIVE

bone grafts (bgs) and the opposite screw insertion technique are reported to enhance initial stability after medial open-wedge high tibial osteotomy (OWHTO); however, it is unclear how the general and local biomechanical stability of the proximal tibia is affected by these reinforcement strategies. In this study, we aimed to assess the biomechanical differences among different fixation configurations for OWHTO under two loading conditions using finite element analysis, and to assess the biomechanical contribution of an opposite screw insertion.

METHODS

Models of the proximal tibia with three different gap defects were created to simulate different distraction heights in OWHTO. Four groups of models were then assembled with different fixation configurations, including the no BG (NBG) group, BG group, partially threaded screw (PT) group, and fully threaded screw (FT) group. Testing loads were applied to simulate the static forces on the knee joint during double-limb and single-limb standing. For each group, the stresses of the lateral hinge area (LHA) and the medial implant area (MIA), the maximum displacement of the tibia and the relative displacement (RD) of the medial gap were evaluated.

RESULTS

Compared to NBG group, bone block grafting effectively reduced the stress of the tibia and implant, as well as the maximum displacement of the tibia and the RD of the medial gap. The opposite screw group showed similar trends in alleviating the stress concentration on the LHA and MIA, and contributing to the maintaining the medial gap reduction, especially in the FT group; however, additional stresses were concentrated on the opposite screw itself, which indicated the potential risk of screw breakage.

CONCLUSIONS

Compared to NBG group, the BG group bone graft showed superior biomechanical advantages in decreasing the risk of implant failure and lateral hinge fracture, and maintaining the reduction in OWHTO. The additional opposite screw provided an extra support to the proximal tibia, with similar contributions to improve the structural stability after osteotomy, especially in the FT group.

Orientation and end zone of the osteotomy cut for high tibial osteotomy: Influence on the risk of lateral hinge fracture. A finite element analysis

INTRODUCTION

the hinge plays a fundamental role in the support and consolidation of a high tibial osteotomy. The objective of this work was to analyse the influence of the end zone of the osteotomy cut and its orientation in relation to the articular joint line (JL) on the risk of hinge fracture.

HYPOTHESIS

a specific orientation and end zone of the osteotomy cut can be utilised to decrease the risk of hinge fracture.

MATERIAL AND METHOD

a finite element (FE) model was used to reproduce the proximal portion of the tibia and the proximal tibiofibular joint with transverse isotropic elastic bone properties. A 1.27mm thick, complete, anteroposterior saw cut was made with a U-shaped saw blade. Five proximal and lateral tibial zones were used according to Nakamura et al corresponding to the end zones of the osteotomy cut. Three angulations of the cut relative to the JL were defined: 10°, 15°, 20°. The tests consisted of simulating 15 possible situations (3 angulations for each of the 5 end zones) on this model. These simulations made it possible to identify the existence of a local stress concentration (von Mises, in MPa) at the level of the hinge, corresponding to the main judgment criterion.

RESULTS

If we consider only the end zones of the osteotomy cut, regardless of its angulation with respect to the JL, the zone which presents, on average, the lowest local stress concentration is the AM zone (40.3MPa). If we consider only the angulation of the osteotomy cut, with respect to the JL, regardless of the end zone of the cut, the angulation that locally concentrates, on average, the least stress is an angulation at 10° (147.7MPa). Finally, it is important to define the best end zone of the osteotomy cut for each angulation value in relation to the JL: for an angulation of 10°, the end zone must be in AM (38MPa), but also for an angulation of 15° (45MPa), and for an angulation of 20° (38MPa).

DISCUSSION-CONCLUSION

With the inherent caveats of the experimental conditions, the hypothesis is confirmed. An end zone of the osteotomy cut exists (AM) and an orientation (10°) that induces the lowest local stress concentration and therefore the least likely to induce lateral hinge fracture. However, the orientation of the osteotomy cut is also a matter of surgical habit, especially regarding complementary osteotomy of the tibial tuberosity that some may want to avoid. Thus, it is equally important to know the best end zone associated with a given angulation of the cut in relation to the JL, which according to these results is the AM zone for each angulation. This information helps guide the operator in their surgical practices according to their habits.

LEVEL OF EVIDENCE

V, expert opinion.

Focal proximal fibular angle: A potential indicator of the tibial mechanical axis in opening-wedge high tibial osteotomy

BACKGROUND

For opening-wedge high tibial osteotomy, correct alignment is essential for a better prognosis. It is difficult to evaluate the mechanical axis of the lower extremity or tibia using a single fluoroscopic image. This study aimed to discuss the use of focal proximal fibular angle (FPFA), which can be assessed by a single fluoroscopic image, as an intraoperative indicator.

METHODS

Eligible for analyses were 111 consecutively treated patients; for the final analyses 96 patients were included. The preoperative and postoperative medial proximal tibial angle (MPTA) and FPFA were measured. The relationship between these two angles, correction amount, weight-bearing line ratio and patient characteristics were analyzed.

RESULTS

The preoperative FPFA and MPTA were 96.5 ± 3.8° (mean ± standard deviation, SD) and 84.8 ± 3.0°, while the postoperative FPFA and MPTA were 87.6 ± 4.1° and 94.0 ± 3.5°, respectively. The preoperative and postoperative sums of the MPTA and FPFA were constant. The discrepancy was less than 3° in all knees, less than 2° in 92.7% knees and less than 1° in 68.8% knees. It was not correlated with age, sex, weight-bearing line ratio, or correction amount.

CONCLUSION

The study findings confirmed the constancy of the sum of the MPTA and FPFA. The FPFA can be easily evaluated on a single fluoroscopic image of the knee. Use of the FPFA as guidance may simplify the procedure of opening-wedge high tibial osteotomy and approximately predict the tibial mechanical axis.

[Knee realignment osteotomy in adults]

BACKGROUND

Nowadays, osteotomy near the knee joint for axial deformities has become an indispensable surgical procedure for joint preservation in the orthopaedic-surgical spectrum. The exact localization and analysis of the deformity are crucial to restoring physiological loading conditions of the entire leg by means of a suitable osteotomy.

PROCEDURES

Thus, above all, the medial "open-wedge" osteotomy has established itself as a standard procedure for the treatment of gonarthrosis caused by varus malalignment. Furthermore, the varus closed-wedge osteotomy of the distal femur also shows very good long-term results. Basically, osteotomies close to the knee are causal corrections in which biological and mechanical aspects must be taken into account. Thus, the correct indication, attention to risk factors, and surgical technique determine the long-term success of the procedure. The doctrine of femoral valgus deformity and the resulting lateral arthrosis, on the other hand, must be reconsidered according to the latest knowledge.

Intraoperatively accurate limb alignment after opening wedge high tibial osteotomy can be lost by large knee joint line convergence angle during surgery

INTRODUCTION

The purpose of this study was to assess early postoperative loss of achieved correction and associated factors after opening wedge high tibial osteotomy (OWHTO).

MATERIALS AND METHODS

OWHTO was performed in 121 patients with osteoarthritis of the knee (mean age 66 years, 154 knees). Anteroposterior radiographs of the knee and full-length leg, and varus and valgus stress radiographs of the knee were taken, and the femorotibial angle (FTA), joint line convergence angle (JLCA), and medial proximal tibial angle (MPTA) were measured. The changes in the FTA, JLCA, and MPTA were defined as ΔFTA, ΔJLCA, and ΔMPTA.

RESULTS

The ΔFTA and ΔJLCA at postoperative 0-2 days were - 1.8 ± 1.2° and - 1.9 ± 1.4°, respectively. The ΔFTA, ΔJLCA and ΔMPTA at postoperative 1-12 months were 0.9 ± 1.3°, 0.2 ± 1.2° and - 0.8 ± 0.8°, respectively. A positive correlation was found between ΔFTA and ΔJLCA at postoperative 0-2 days (ρ = 0.642, P < 0.001) and at postoperative 1-12 months (ρ = 0.402, P < 0.001). A negative correlation was found between ΔFTA and ΔMPTA at postoperative 1-12 months (ρ = - 0.534, P < 0.001). A discrepancy in alignment represented by the FTA occurred in the supine radiographs between the day of surgery and postoperative 2 days. Multiple regression analysis suggested that postoperative JLCA on the day of surgery was the factor related to early postoperative change of the FTA.

CONCLUSIONS

This study demonstrated the early loss of achieved correction after OWHTO due to change of the JLCA, even if the accurate alignment is obtained intraoperatively.

Relationship between the bony correction angle and mechanical axis change and their differences between closed and open wedge high tibial osteotomy

BACKGROUND

The purpose of this study was to investigate the relationship between the bony correction angle and mechanical axis change and their differences between closed wedge high tibial osteotomy (CWHTO) and open wedge high tibial osteotomy (OWHTO).

METHODS

A total of 100 knees of 89 patients who underwent OWHTO (50 knees) or CWHTO (50 knees) between 2011 and 2015 with a clinical follow-up for 1 year and a radiological follow-up for 1 month were investigated in a case control study. Anteroposterior radiographs of the knee and full-length leg were taken in the standing position using digital acquisition. The femorotibial angle (FTA), % mechanical axis deviation (MAD), % anatomical tibial axis deviation (ATAD), % mechanical tibial axis deviation (MTAD), mechanical medial proximal tibial angle (mMPTA), and joint line convergence angle (JLCA) were measured on preoperative and postoperative radiographs using a dedicated software.

RESULTS

CWHTO resulted in a greater variation between the tibial anatomical and mechanical axes than OWHTO (P <  0.05), and a greater soft tissue correction than OWHTO (P <  0.05). However, no significant difference was found between CWHTO and OWHTO in the ratio of MAD change to the correction angle. When the osteotomy was planned with the same bony correction angle, %MAD passed more laterally in OWHTO than in CWHTO (P <  0.05). These results suggested a lesser valgus bony correction ratio due to greater medial shift of the tibial axis and greater valgus compensation of the soft tissue in CWHTO compared to OWHTO.

CONCLUSIONS

The ratio of mechanical axis shift to the correction angle differed in preoperative planning, but postoperative alignment was comparable between opening wedge and closed wedge high tibial osteotomy.

Classical target coronal alignment in high tibial osteotomy demonstrates validity in terms of knee kinematics and kinetics in a computer model

PURPOSE

The purpose of this study was to determine the ideal coronal alignment under dynamic conditions after open-wedge high tibial osteotomy (OWHTO). It was hypothesised that, although the classical target alignment was based on experimental evidence, it would demonstrate biomechanical validity.

METHODS

Musculoskeletal computer models were analysed with various degrees of coronal correction in OWHTO during gait and squat, specifically with the mechanical axis passing through points at 40%, 50%, 60%, 62.5%, 70%, and 80% of the tibial plateau from the medial edge, defined as the weight-bearing line percentage (WBL%). The peak load on the lateral tibiofemoral (TF) joint, the medial collateral ligament (MCL), and anterior cruciate ligament (ACL) tensions, and knee kinematics with or without increased posterior tibial slope (PTS) were evaluated.

RESULTS

The classical alignment with WBL62.5% achieved sufficient load on the lateral TF joint and maintained normal knee kinematics after OWHTO. However, over-correction with WBL80% caused an excessive lateral load and non-physiological kinematics. Increased WBL% resulted in increased MCL tension due to lateral femoral movement against the tibia. With WBL80%, abnormal contact between the medial femoral condyle and the medial intercondylar eminence of the tibia occurred at knee extension. The screw-home movement around knee extension and the TF rotational angle during flexion were reduced as WBL% increased. Increased PTS was associated with increased ACL tension and decreased TF rotation angle because of ligamentous imbalance.

CONCLUSIONS

The classical target alignment demonstrated validity in OWHTO, and over-correction should be avoided as it negatively impacts clinical outcome.

LEVEL OF EVIDENCE

IV.

What Factors Predict Patient Dissatisfaction After Contemporary Medial Opening-Wedge High Tibial Osteotomy?

BACKGROUND

Although current advances in surgical techniques have improved outcomes of the medial opening-wedge high tibial osteotomy (MOWHTO), the factors associated with patient dissatisfaction remain unclear. Thus, the purpose of this study is to identify risk factors for patient dissatisfaction following contemporary MOWHTO.

METHODS

We retrospectively reviewed prospectively collected data on 140 consecutive MOWHTO patients using an anatomical locking plate with a minimum follow-up of 2 years. Patient demographics, pain Visual Analogue Scale, Western Ontario and McMaster Universities Osteoarthritis Index, Kellgren-Lawrence (K-L) grade, activity level, articular cartilage and meniscal status, hip-knee-ankle angle, change in alignment, and postoperative weight-bearing line ratio were recorded. Patients were categorized using the New Knee Society Score into satisfied (satisfaction score ≥20) or dissatisfied (satisfaction score <20) groups. Patient and surgical factors were compared between the groups by the identified predictors. Multiple logistic regression analysis was used to analyze risk factors, including K-L grade IV medial osteoarthritis (OA), preoperative pain Visual Analogue Scale, total Western Ontario and McMaster Universities Osteoarthritis Index score, postoperative hip-knee-ankle angle, change in alignment, and partial meniscectomy.

RESULTS

Of the 140 patients, 24 (17.1%) were dissatisfied with their results. Multiple logistic regression analysis showed that only K-L grade IV medial OA was statistically associated with patient dissatisfaction following MOWHTO (odds ratio 4.911, 95% confidence interval 1.820-13.256, P < .01).

CONCLUSION

Severe medial OA was an independent risk factor for dissatisfaction following contemporary MOWHTO using a rigid locking plate. Surgeons should take this into consideration when counseling and choosing surgical options in MOWHTO candidates with severe medial OA.

LEVEL OF EVIDENCE

Level III.

Effect of saw blade geometry on crack initiation and propagation on the lateral cortical hinge for HTO: Finite element analysis

INTRODUCTION

The hinge plays a primary role in the hold and healing of a high tibial osteotomy (HTO). Weakening of the hinge is a risk factor for failure. The aim of our study was to determine whether the geometry of the saw blade's cutting edge impacts crack initiation or propagation on the hinge.

HYPOTHESIS

A certain cutting edge geometry exists that will reduce this risk.

MATERIALS AND METHODS

A finite element model with transverse isotropic elastic bone properties was created. A 1.27-mm thick saw cut (full thickness in anteroposterior direction) was made leaving a 1cm lateral cortical hinge. Three different cutting edge geometries were compared: rectangular, U-shaped, V-shaped. Opening of the osteotomy was done over 1mm for 1 s by a load applied distally with the proximal portion fixed. In the first simulation, no crack was initiated at the hinge, while in the second simulation, the beginnings of a 2mm crack angled upward at 15° was added. These two simulations were used to identify whether a local stress riser was present at the hinge. This information was used to calculate the energy release rate to the hinge, which corresponds to the energy needed to initiate and propagate a crack on the hinge.

RESULTS

In the first simulation (no crack initiation), a rectangular saw blade geometry resulted in the lowest local stress concentration. In the second simulation (with crack initiation), the U-shaped geometry resulted in the lowest local stress concentration. The U-shaped geometry had the lowest energy release rate, meaning that it was the least likely to initiate and propagate a crack on the lateral cortical hinge.

DISCUSSION/CONCLUSION

Keeping the inherent limitations related to computer modelling in mind, our findings show that a U-shaped cutting edge is least likely to initiate or propagate a crack since it has the lowest energy release rate. This confirms our hypothesis.

LEVEL OF EVIDENCE

V, expert opinion.

Bone autografting in medial open wedge high tibial osteotomy results in improved osseous gap healing on computed tomography, but no functional advantage: a prospective, randomised, controlled trial

PURPOSE

Medial open wedge high tibial osteotomy (owHTO) is a valuable surgical technique used to manage medial degeneration in varus knees. Iliac crest autograft is considered the gold standard gap-filler. It was hypothesised that iliac crest autograft promotes gap healing and improves functional outcome in owHTO.

METHODS

Between 2005 and 2009, patients scheduled to undergo owHTO stabilised by a medial locking compression plate were randomised to undergo owHTO either with iliac crest autograft (group A) or without bone void filler (group B). Pre- and postoperative leg axes were recorded. At 3 and 12 months postoperatively, the healing of the osteotomy gap was measured as a percentage on CT images, and functional scores were recorded.

RESULTS

There were 15 patients in group A, and 25 in group B. The groups were similar in age, sex ratio, knee varus deformity, body mass index, and smoking status. Group A and B had similar preoperative varus (6.9° vs. 7.6°) and postoperative valgus (2.2° vs. 3.0°). Compared with the control group, group A had a significantly greater degree of osseous gap healing after 3 months (40.1% vs. 10.8%, p = 0.045) and 12 months (91.5% vs. 59.1%, p ≤ 0.001). Multiple linear regression analysis found that bone grafting was an independent promoting factor for gap healing, while increased preoperative varus was an independent retardant factor at 3 months (p = 0.004 and p = 0.002, respectively) and 12 months (p ≤ 0.001 and p = 0.003, respectively). Younger age was a promoting factor for gap healing on CT at 3 months (p ≤ 0.001), but not at 12 months. No correlations were found between bone healing and functional outcome, body mass index, or smoking status.

CONCLUSIONS

Iliac crest autograft significantly increases healing of the osteotomy gap after owHTO. Increased preoperative varus and older patient age are independent factors that delay early healing of the osteotomy. However, no functional advantage was found at 3 or 12 months postoperatively. Therefore, routine use of iliac crest autograft cannot be recommended.

LEVEL OF EVIDENCE

II.

Extra-articular Lateral Hinge Fracture Does Not Affect the Outcomes in Medial Open-Wedge High Tibial Osteotomy Using a Locked Plate System

PURPOSE

To compare the radiologic and clinical outcomes in patients with and without lateral hinge fractures (LHFs) during medial open-wedge high tibial osteotomy (MOWHTO) using a locked plate system, as well as to assess whether LHFs could affect the midterm outcomes.

METHODS

From May 2008 to November 2015, 164 knees underwent MOWHTO using a locked plate system for the treatment of knee osteoarthritis. LHFs were recognized by radiographs during or after the high tibial osteotomy and were not additionally treated. In all patients, we applied the same rehabilitation protocol that allowed full weight bearing at 6 weeks. Patients were divided into LHF (types I and II) and nonfracture groups. Radiologically, we compared any serial changes in the hip-knee-ankle angle, femorotibial angle, medial proximal tibial angle, and posterior tibial slope angle from the immediate postoperative radiographs to the final radiographs. The union process of the osteotomy site among the groups was also evaluated. Clinically, the postoperative American Knee Society Score and knee range of motion at latest follow-up were compared. Postoperative complications were also evaluated.

RESULTS

The average age at operation was 56.0 years (range, 42-67 years), and the average follow-up period was 62.2 months (range, 24-120 months). LHFs were observed in 37 knees (22.6%) and were divided into the type I (16 knees) and type II (21 knees) groups. All groups showed no significant changes in serial evaluations of the postoperative hip-knee-ankle angle, femorotibial angle, medial proximal tibial angle, and posterior tibial slope angle. The improvements in the American Knee Society Score and knee range of motion were not significantly different among the groups. No patients showed correction loss or union problems.

CONCLUSIONS

Type I and II LHFs in MOWHTO using a medial locked plate system and relatively conservative rehabilitation protocol with full weight-bearing walking commenced at 6 weeks postoperatively showed no radiologic changes or functional deterioration during midterm follow-up.

LEVEL OF EVIDENCE

Level IV, case series.

A Retrospective Comparison of Union Rates After Open Wedge High Tibial Osteotomies With and Without Synthetic Bone Grafts (Hydroxyapatite and β-tricalciumphosphate) at 2 Years

PURPOSE

To evaluate the clinical and radiological results of no bone graft (NBG) after opening wedge high tibial osteotomy (OWHTO) with a locking plate and to compare the bone union rate between the synthetic bone graft (SBG) group and the NBG group after OWHTO using serial radiographs.

METHODS

From 2012 to 2015, OWHTOs were performed with SBG or without bone graft using long locking plates. Inclusion criteria were: (1) OWHTO for disease of the medial compartment with varus deformity, and (2) minimum 2-year follow-up and radiographs taken serially to 2 years. Exclusion criteria were: (1) follow-up period <2 years (n = 8) or (2) absence of at least 1 radiograph taken at each follow-up point (n = 14). We retrospectively reviewed radiographs taken preoperatively and at 6 weeks, 3 months, 6 months, 1 year, and 2 years postoperatively. Groups comprised those filled with a synthetic bone [hydroxyapatite (HA) and β-tricalciumphosphate (TCP), n=33, SBG group] or without a bone graft (n = 38, NBG group). We compared bone union rate between the 2 groups by measuring the union zone from zone 1 to zone 5 in serial radiographs using Fisher's exact test.

RESULTS

OWHTO was performed in a total of 93 knees and 71 knees were included in this study. Both groups showed good clinical and radiological results without correction loss at 2 years. The entire NBG group and 93.9% of the SBG group showed union over zone 3 at 2 years. However, the NBG group showed significantly more incorporation than the SBG group at 6 months (P = .006), 1 year (P = .0003), and 2 years (P = .0003).

CONCLUSIONS

Union without correction loss was obtained after OWHTO without bone graft. The NBG group showed significantly more incorporation than the SBG group (HA and β-TCP) within 2 years.

LEVEL OF EVIDENCE

Level IV, case series.

Additional distal femoral osteotomy for insufficient correction after high tibial osteotomy

A 70-year-old man who was treated with a closed-wedge high tibial osteotomy (HTO) had recurrent right medial knee pain 12 years after the initial osteotomy. We planned a recorrection osteotomy because the patient led an active lifestyle, had well-preserved range of motion and the lateral compartment was still intact. According to preoperative deformity analysis, which indicated a tibia in slight valgus and a femur in moderate varus, recorrection of the distal femur was chosen. Seven degrees of biplanar distal femoral osteotomy (DFO) was performed using a contralateral version of the TomoFix Medial Distal Femur. At 1 year follow-up, the femorotibial angle had improved from 178° to 170°, and the Japanese Orthopaedic Association score had improved from 75 to 95 points. Additional DFO could be a viable alternative for total knee arthroplasty or recorrection HTO when the centre of the deformity is located at the distal femur.

The correlation of sagittal osteotomy inclination and the anteroposterior translation in medial open-wedge high tibial osteotomy-one of the causes affecting the patellofemoral joint?

PURPOSE

For opening-wedge high tibial osteotomy, previous studies have shown that most osteotomies were anterior-inclined. The purpose of this study was to determine the effect of sagittal osteotomy inclination on the anteroposterior translation of osteomized fragments and discuss its possible impact on the patellofemoral joint.

METHODS

We retrospectively measured the angle between the joint line and the sagittal osteotomy line. We also evaluated the anteroposterior translation of osteomized fragments by measuring the distance from the most posterior point of the tibial plateau to the tibial tuberosity and the anterior cortical line. Correlation between the sagittal osteotomy inclination and the anteroposterior translation of fragments was analyzed.

RESULTS

The mean sagittal osteotomy inclination was 6.3 ± 8.4° anteriorly to the joint line and 82% of osteotomies were anterior-inclined. The anteroposterior translation of the osteomized fragments was moderately correlated to the sagittal inclination. Anterior-inclined osteotomy tends to result in the anterior translation of the proximal fragment.

CONCLUSION

High rates of anterior-inclined osteotomy have been described previously as well as in this study. Anterior-inclined osteotomy tends to result in the anterior translation of the proximal fragment. This may result in increased vertical vector force onto the patellofemoral joint, which further accelerates patellofemoral joint degeneration. Therefore, surgeons should attempt to perform parallel osteotomy or avoid anterior displacement of the proximal fragment if there is concern of anterior-inclined osteotomy.

Gap healing after medial open-wedge high tibial osteotomy using injectable beta-tricalcium phosphate

PURPOSE

The study aim was to evaluate gap healing after medial open-wedge high tibial osteotomy (MOWHTO) using novel injectable beta-tricalcium phosphate (β-TCP) as gap filler. We also aimed to evaluate radiographic and clinical outcome of MOWHTO using injectable β-TCP.

METHODS

Consecutive 28 patients underwent MOWHTO using anatomical locking plate fixation, and β-TCP was injected as gap filler. Serial radiographs and computed tomography were taken at postoperative 3 and 12 months, and gap healing was assessed. Lower extremity alignment was measured on radiographs, and clinical outcome was evaluated by determining International Knee Documentation Committee, Western Ontario and McMaster Universities Arthritis Index, and visual analogue scales for pain scores.

RESULTS

Progress of bone union was found on plain radiographs, and the mean ratio (β-TCP/host bone) of computed tomography attenuation values significantly changed from postoperative 3 months to 12 months, which indicates maturation of β-TCP. The average mechanical femoro-tibial angle changed from 4.1° varus (preoperative) to 4.8° valgus (3 months) and maintained until 12 months (4.3° valgus). All clinical outcome scores were significantly improved and no significant complication occurred.

CONCLUSION

Using injectable β-TCP as gap filler for MOWHTO resulted in satisfactory gap healing without complication. Radiographic and clinical results were satisfactory. The injectable β-TCP can be a safe and effective option for gap filling after MOWHTO.

Surgical anatomy of medial open-wedge high tibial osteotomy: crucial steps and pitfalls

PURPOSE

To give an overview of the basic knowledge of the functional surgical anatomy of the proximal lower leg and the popliteal region relevant to medial high tibial osteotomy (HTO) as key anatomical structures in spatial relation to the popliteal region and the proximal tibiofibular joint are usually not directly visible and thus escape a direct inspection.

METHODS

The surgical anatomy of the human proximal lower leg and its relevance for HTO are illustrated with a special emphasis on the individual steps of the operation involving creation of the osteotomy planes and plate fixation.

RESULTS

The posteriorly located popliteal neurovascular bundle, but also lateral structures such as the peroneal nerve, the head of the fibula and the lateral collateral ligament must be protected from the instruments used for osteotomy. Neither positioning the knee joint in flexion, nor the posterior thin muscle layer of the popliteal muscle offers adequate protection of the popliteal neurovascular bundle when performing the osteotomy. Tactile feedback through a loss-of-resistance when the opposite cortex is perforated is only possible when sawing and drilling is performed in a pounding fashion. Kirschner wires with a proximal thread, therefore, always need to be introduced under fluoroscopic control. Due to anatomy of the tibial head, the tibial slope may increase inadvertently.

CONCLUSIONS

Enhanced surgical knowledge of anatomical structures that are at a potential risk during the different steps of osteotomy or plate fixation will help to avoid possible injuries.

LEVEL OF EVIDENCE

Expert opinion, Level V.

Appropriate hinge position for prevention of unstable lateral hinge fracture in open wedge high tibial osteotomy

AIMS

Open wedge high tibial osteotomy (OWHTO) for medial-compartment osteoarthritis of the knee can be complicated by intra-operative lateral hinge fracture (LHF). We aimed to establish the relationship between hinge position and fracture types, and suggest an appropriate hinge position to reduce the risk of this complication.

PATIENTS AND METHODS

Consecutive patients undergoing OWHTO were evaluated on coronal multiplanar reconstruction CT images. Hinge positions were divided into five zones in our new classification, by their relationship to the proximal tibiofibular joint (PTFJ). Fractures were classified into types I, II, and III according to the Takeuchi classification.

RESULTS

Among 111 patients undergoing OWHTOs, 22 sustained lateral hinge fractures. Of the 89 patients without fractures, 70 had hinges in the zone within the PTFJ and lateral to the medial margin of the PTFJ (zone WL), just above the PTFJ. Among the five zones, the relative risk of unstable fracture was significantly lower in zone WL (relative risk 0.24, confidence interval 0.17 to 0.34).

CONCLUSION

Zone WL appears to offer the safest position for the placement of the osteotomy hinge when trying to avoid a fracture at the osteotomy site. Cite this article: Bone Joint J 2017;99B10:1313-18.