A study of method robustness for arsenic speciation in drinking water samples by anion exchange HPLC-ICP-MS

Arsenic speciation in freshwater fish: challenges and research needs

Food and water are the main sources of human exposure to arsenic. It is important to determine arsenic species in food because the toxicities of arsenic vary greatly with its chemical speciation. Extensive research has focused on high concentrations of arsenic species in marine organisms. The concentrations of arsenic species in freshwater fish are much lower, and their determination presents analytical challenges. In this review, we summarize the current state of knowledge on arsenic speciation in freshwater fish and discuss challenges and research needs. Fish samples are typically homogenized, and arsenic species are extracted using water/methanol with the assistance of sonication and enzyme treatment. Arsenic species in the extracts are commonly separated using high-performance liquid chromatography (HPLC) and detected using inductively coupled plasma mass spectrometry (ICPMS). Electrospray ionization tandem mass spectrometry, used in combination with HPLC and ICPMS, provides complementary information for the identification and characterization of arsenic species. The methods and perspectives discussed in this review, covering sample preparation, chromatography separation, and mass spectrometry detection, are directed to arsenic speciation in freshwater fish and applicable to studies of other food items. Despite progress made in arsenic speciation analysis, a large fraction of the total arsenic in freshwater fish remains unidentified. It is challenging to identify and quantify arsenic species present in complex sample matrices at very low concentrations. Further research is needed to improve the extraction efficiency, chromatographic resolution, detection sensitivity, and characterization capability.

Simple colorimetric assay using pectin hydrogel reagent coupled with camera-based photometry for trace arsenic determination

Humans mainly ingest arsenic through contaminated drinking water, causing serious health effects. The World Health Organization (WHO) has set the permissible limit of arsenic in drinking water at 0.01 mg/L and concentrations should be regularly determined to ensure a safe supply. In this study, a leucomalachite green (LMG) pectin-based hydrogel reagent was prepared that selectively reacted with arsenic over other metals including manganese, copper, lead, iron, and cadmium. Pectin, optimized at 0.2% (w/v), was used to form the hydrogel matrix. Arsenic reacts with potassium iodate in sodium acetate buffer medium to liberate iodine that then oxidizes LMG entrapped in pectin hydrogel to form a blue product. Camera-based photometry/ImageJ software was used to monitor the color intensity, eliminating the need for a spectrophotometer. The intensity of gray in the red channel was chosen as optimal for the red, green, and blue (RGB) analysis. The colorimetric assay revealed a dynamic detection range toward arsenic solution standards of 0.003-1 mg/L, covering the WHO recommendation of below 0.01 mg/L arsenic in drinking water. The assay gave recovery rates between 97 and 109% at a 95% confidence interval, with precision of 4-9%. Concentrations of arsenic in the spiked drinking water, tap water, and pond water samples monitored by the developed method agreed well with conventional inductively coupled plasma optical emission spectrometry. This assay showed promise for on-site quantitative analysis of arsenic in water samples.

Characterization and health risk assessment of arsenic in natural waters of the Indus River Basin, Pakistan

The elevated concentrations of arsenic in natural water are one of the major environmental threats to human health. However, the existing characteristics, controlling mechanisms, and associated risks of arsenic in natural waters in the Indus River Basin (IRB), Pakistan, are yet to be unequivocally understood. In this study, a total of 203 samples of surface water (SW), shallow groundwater (SGW), and deep groundwater (DGW) were collected from the IRB to assess the geochemical characteristics of arsenic and its associated health risks, as all three kinds of waters are the main sources of drinking and domestic usage. The results revealed that the arsenic concentrations in the SW, SGW, and DGW were in the ranges of 1.1-26.45, 1.05-44.44, and 0.67-41.09 μg L^-1, respectively. Furthermore, the predominance of As (V) (97 %) over As(III) (3 %) confirmed that the desorption of As in oxidizing environments with elevated pH and Eh is the controlling mechanism. The hazard quotient of 11-45 % and 20-60 % samples and cancer risk of 26-64 % and 26-68 % samples indicated high health risks for the adults and children, respectively, suggesting an immense need for appropriate measures of reducing natural water arsenic concentrations in IRB from the human health perspectives.

Ammonium acetate as a novel buffer for highly selective robust urinary HPLC-ICP-MS arsenic speciation methodology

Ammonium acetate is employed in order to develop a novel HPLC-ICP-MS arsenic speciation methodology applicable to six arsenic species, i.e, AC, AB, As^III, As^V, DMA and MMA. The most predominant species in the toxicological field are covered in a 30-min chromatogram with reproducible and repeatability peak area ratio. Moreover, typical problems from traditional methods are sorted out by using a robust, high-selective and ⁷⁵ArCl⁺ interference-free methodology. Chromatographic and detector optimization ensures low LOQs for each species with acceptable precision and accuracy values obtained using four urinary arsenic speciation PTS enabling to be useful for sub ng mL^-1 arsenic exposure assessments.

Electroactive Anion Receptor with High Affinity for Arsenate

Herein, we present the synthesis and characterization of a macrocyclic polyamide cage that incorporates redox-active 1,4-dithiin units. UV/vis titration experiments with eight anions in acetonitrile revealed high affinity for H₂AsO₄^- (log β₂ = 10.4_-0.4^+0.4) and HCO₃^- (log β₂ = 8.3_-0.4^+0.3) over other common anionic guests, such as Cl^- (log K_1:1 = 3.20_-0.02^+0.03), HSO₄^- (log K_1:1 = 3.57_-0.03^+0.02), and H₂PO₄^- (log K_1:1 = 4.24_-0.04^+0.05), by the selective formation of HG₂ complexes. The recognition of arsenate over phosphate is rare among both proteins and synthetic receptors, and though the origin of selectivity is not known, exploiting the difference in the binding stoichiometry represents an underexplored avenue toward developing receptors that can differentiate between the two anions. Additional analysis by ¹H NMR in 1:3 CD₂Cl₂/MeCN-d₃ found a strong dependence of anion binding stoichiometry with the solvent employed. Finally, titration experiments with cyclic voltammetry provided varying and complex responses for each anion tested, though reaction between the anion and receptors was observed in most cases. These results implicate 1,4-dithiins as interesting recognition moieties in the construction of supramolecular receptors.

Analytical Methodologies for the Determination of Organoarsenicals in Edible Marine Species: A Review

Setting regulatory limits for arsenic in food is complicated, owing to the enormous diversity of arsenic metabolism in humans, lack of knowledge about the toxicity of these chemicals, and lack of accurate arsenic speciation data on foodstuffs. Identification and quantification of the toxic arsenic compounds are imperative to understanding the risk associated with exposure to arsenic from dietary intake, which, in turn, underscores the need for speciation analysis of the food. Arsenic speciation in seafood is challenging, owing to its existence in myriads of chemical forms and oxidation states. Interconversions occurring between chemical forms, matrix complexity, lack of standards and certified reference materials, and lack of widely accepted measurement protocols present additional challenges. This review covers the current analytical techniques for diverse arsenic species. The requirement for high-quality arsenic speciation data that is essential for establishing legislation and setting regulatory limits for arsenic in food is explored.

Geological factors controlling occurrence and distribution of arsenic in groundwaters from the southern margin of the Duero Basin, Spain

Groundwater from springs and boreholes on the southern edge of the Cenozoic Duero Basin (DB) of Spain has concentrations of arsenic (As) which are commonly above the EC drinking-water limit of 10 μg/L and reach observed values up to 241 μg/L. Groundwater compositions within the sedimentary aquifer vary from Ca-HCO3 type, variably affected by evaporation and agricultural pollution at shallow levels, to Na-HCO3 compositions in deeper boreholes of the basin. Groundwater conditions are mainly oxidising, but reducing groundwaters exist in sub-basins within the aquifer, localised flow paths likely being influenced by basement structure. Arsenic concentrations are spatially variable, reaching up to 38 μg/L in springs of the Spanish Central System (SCS) basement aquifer and up to 62 μg/L in springs from the DB. Highest As concentrations are associated with the Na-HCO3 compositions in deep boreholes (200-450 m depth) within the DB. These have high pH values (up to 9.6) which can give rise to associated elevated concentrations of V and U (up to 64 and 30 μg/L, respectively). In the deep borehole waters of the DB, oxidising flows derived from the mineralised igneous-metamorphic basement and discharging via major faults, and are considered the origin of the higher concentrations. Compositions are consistent with desorption of As and other anionic species from metal oxyhydroxides in an oxic environment. Under locally reducing conditions prevalent in some low-flow parts of the DB, an absence of detectable dissolved As is coincident with low or undetectable SO4 concentrations, and consistent with loss via formation of authigenic sulphide minerals. Mitigation measures are needed urgently in this semi-arid region where provision of alternative sources of safe drinking water is logistically difficult and expensive.

Arsenic speciation in water by high-performance liquid chromatography/inductively coupled plasma mass spectrometry-method validation and uncertainty estimation

RATIONALE

In order to obtain reliable analytical results for the separation and determination of arsenic species by high-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICP-MS), the analytical procedure must be fully validated and the measurement uncertainty of the analytical result should be estimated.

METHODS

The total arsenic concentration of the samples was determined by ICP-MS. Separation of the arsenic species, AsB, As(III), DMA, MMA and As(V), was accomplished by liquid chromatography, which was hyphenated to inductively coupled plasma mass spectrometry, used for detection purposes. Automated handling of these systems was achieved with Chromera software.

RESULTS

The separation capability between the analytical signals of arsenic species, AsB-As(III), As(III)-DMA, DMA-MMA and MMA-As(V), was 1.3, 1.1, 5.1 and 4.6, respectively. The limit of detection (LOD) values ranged from 0.070 µg L(-1) for DMA to 0.13 µg L(-1) for MMA. The expanded uncertainty U [%] values for coverage factor k = 2 estimated for AsB, As(III), DMA, MMA and As(V) were 12 %, 13 %, 5.6 %, 9.6 % and 8.6 %, respectively.

CONCLUSIONS

This study reports, for the first time, building the uncertainty budgets for five arsenic species and estimation of the expanded uncertainty (for k = 2). The qualitative and quantitative parameters determined in the validation process indicate that the presented analytical procedure can be applied for the determination of AsB, As(III), DMA, MMA and As(V) in water.

In situ solvent formation microextraction in the presence of ionic liquid for preconcentration and speciation of arsenic in saline samples and total arsenic in biological samples by electrothermal atomic absorption spectrometry

In this modality, the extraction phase is formed in situ while simultaneously extracting analytes. First, a water-miscible ionic liquid (IL) ([Hmim][BF(4)]), capable of complete dissolving in the aqueous solution, was added to the sample. Then, an ion-exchange reagent (NaPF(6)) was added to obtain the hydrophobic IL ([Hmim][PF(6)]) that acted as the analyte extractant to form the cloudy homogeneous solution for the preconcentration and speciation of trace amounts of As (III) and As (V) with electrothermal atomic absorption spectrometry (ETAAS) detection. In situ solvent formation microextraction is a simple and rapid method for extraction and preconcentration of metal ions from sample solutions containing high concentration of salt. Some effective factors that influence the microextraction efficiency were investigated and optimized. Under the optimum experimental conditions, the limit of detection (3 σ) and the enrichment factor were 6 ng L(-1) and 198, respectively. The obtained relative standard deviation was 4.78%. The proposed method was successfully applied for the determination of As (III) and As (V) in water samples, food salts, and total As in biological samples.

Global DNA methylation in earthworms: a candidate biomarker of epigenetic risks related to the presence of metals/metalloids in terrestrial environments

In this work, possible relationships between global DNA methylation and metal/metalloid concentrations in earthworms have been explored. Direct correlation was observed between soil and tissue As, Se, Sb, Zn, Cu, Mn, Ag, Co, Hg, Pb (p< 0.05). Speciation results obtained for As and Hg hint at the capability of earthworms for conversion of inorganic element forms present in soil to methylated species. Inverse correlation was observed between the percentage of methylated DNA cytosines and total tissue As, As + Hg, As + Hg + Se + Sb (β = -0.8456, p = 0.071; β = -0.9406, p = 0.017; β = -0.9526, p = 0.012 respectively), as well as inorganic As + Hg (β = -0.8807, p = 0.049). It was concluded that earthworms would be particularly helpful as bioindicators of elements undergoing in vivo methylation and might also be used to assess the related risk of epigenetic changes in DNA methylation.

Arsenic and its speciation in water samples by high performance liquid chromatography inductively coupled plasma mass spectrometry--last decade review

Arsenic composes a danger for human health all over the world as it is responsible for water resources contamination. The toxicity of arsenic depends on its chemical form. However, occurrence of particular arsenic species is dependent on processes occurring in water. Nowadays, more arsenic species is detected and analyzed in different kind of water (mineral, tap, waste), mainly owing to great possibilities resulting from coupling high performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS). This review mainly describes arsenic speciation analysis by HPLC-ICP-MS technique on the basis of articles that have been published since 2000. Arsenic chemistry, occurrence in different kind of water, total arsenic determination with interferences elimination and its validation and analytical performance are also reviewed.

Escherichia coli as a bioreporter in ecotoxicology

Ecotoxicological assessment relies to a large extent on the information gathered with surrogate species and the extrapolation of test results across species and different levels of biological organisation. Bacteria have long been used as a bioreporter for genotoxic testing and general toxicity. Today, it is clear that bacteria have the potential for screening of other toxicological endpoints. Escherichia coli has been studied for years; in-depth knowledge of its biochemistry and genetics makes it the most proficient prokaryote for the development of new toxicological assays. Several assays have been designed with E. coli as a bioreporter, and the recent trend to develop novel, better advanced reporters makes bioreporter development one of the most dynamic in ecotoxicology. Based on in-depth knowledge of E. coli, new assays are being developed or existing ones redesigned, thanks to the availability of new reporter genes and new or improved substrates. The technological evolution towards easier and more sensitive detection of different gene products is another important aspect. Often, this requires the redesign of the bacterium to make it compatible with the novel measuring tests. Recent advances in surface chemistry and nanoelectronics open the perspective for advanced reporter based on novel measuring platforms and with an online potential. In this article, we will discuss the use of E. coli-based bioreporters in ecotoxicological applications as well as some innovative sensors awaited for the future.

A comparative study of the extractability of arsenic species from silverbeet and amaranth vegetables

There is still no reliable standard extraction method for the speciation of arsenic (As) in plant tissue, and hence there is great interest in developing one for plants that are used as human food. Speciation and bioavailability are critical for accurate human health risk assessment, as As species vary in both their toxicity and bioavailability. Recent incidences of As poisoning in many countries have led to significant research into the fate and dynamics of As in the soil and water environment, including speciation. Although one of the major pathways of ingestion of As is via food, only limited research has been conducted to assess the nature and proportion of various As species present in food crops. In this study, we compared the efficacy of ammonium dihydrogen phosphate and protein extracting solution for the extractability of As from two different species of spinach (amaranth and silverbeet). We found that a microwave-assisted technique with protein extracting solution was most effective, yielding 76-114% extractability and excellent separation and speciation of all As species present in the spinach matrices. The stability test for extracted As species showed them as stable for 45 days without any significant loss or inter-conversion. Both As(III) and As(V) were identified in the shoots of amaranth and silverbeet. However, the percentage of As species varied between amaranth and silverbeet. The silverbeet shoot showed a somewhat higher percentage of As(V), while the amaranth showed a higher percentage of As(III). The samples contained mostly inorganic As, especially As(III) (>90%) in the edible part of the vegetables, a form that is more toxic and bioavailable than other organic and methylated species.

Speciation of arsenic by ion chromatography inductively coupled plasma mass spectrometry using ammonium eluents

A method based on ion chromatography (IC) and inductively coupled plasma MS (ICP-MS) was developed for the speciation of arsenic in water and soil extracts. An anion-exchange column (G3154A/101) was used to separate As(III), As(V), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) with excellent resolution. Various ammonium salts, including NH4H2PO4, (NH4)2HPO4, (NH4)2CO3, and NH4HCO3, were examined as eluents to reduce matrix interference from chloride and to solve clogging problems. The best arsenic speciation was obtained within 9 min with excellent resolution and without interference from high chloride concentrations using an eluent containing 7.5 mM (NH4)2HPO4 at pH 7.9. The detection limits for the target arsenic species ranged from 0.1 to 0.4 microg/L with direct injection of sample without matrix elimination. The proposed method was effectively demonstrated by determining arsenic species in contaminated waters and soils of Bangladesh.

Arsenic and its speciation analysis using high-performance liquid chromatography and inductively coupled plasma mass spectrometry

It is known that arsenic has different toxicological properties dependent upon both its oxidation state for inorganic compounds, as well as the different toxicity levels exhibited for organic arsenic compounds. The field of arsenic speciation analysis has grown rapidly in recent years, especially with the utilization of high-performance liquid chromatography (HPLC) coupled to inductively coupled plasma mass spectrometry (ICP-MS), a highly sensitive and robust detector system. Complete characterization of arsenic compounds is necessary to understand intake, accumulation, transport, storage, detoxification and activation of this element in the natural environment and living systems. This review describes the essential background and toxicity of arsenic in the environment, and more importantly, some currently used chromatographic applications and sample handling procedures necessary to accurately detect and quantify arsenic in its various chemical forms. Applications and work using only HPLC-ICP-MS for arsenic speciation of environmental and biological samples are presented in this review.

Pretreatment procedures for characterization of arsenic and selenium species in complex samples utilizing coupled techniques with mass spectrometric detection

Research interest in analyzing arsenic and selenium is dictated by their species-dependent behavior in the environment and in living organisms. Different analytical methodologies for known species in relatively simple chemical systems are well established, yet the analysis of complex samples is still a challenge. Owing to the complex matrix and low concentrations of target species that may be chemically labile, suitable pretreatment of the sample becomes a critical step in any speciation procedure. In this paper, the pretreatment procedures used for arsenic and selenium speciation are reviewed with the emphasis on the link between the analytical protocol applied and the biologically-significant information provided by the results obtained. In the first approach, the aim of pretreatment is to convert the original sample into a form that can be analyzed by a coupled (hyphenated) technique, preventing possible losses and/or species interconversion. Common techniques include different leaching and extraction modes, enzymatic hydrolysis, species volatilization, and so on, with or without species preconcentration. On the other hand, if the speciation analysis is performed for elucidation of elemental pathways and specific functions in a living system, more conscious pretreatment and/or fractionation is needed. The macroscopic separation of organs and tissues, isolation of certain types of cells, cell disruption and separation of sub-cellular fractions, as well as isolation of a specific biomolecules become important. Furthermore, to understand molecular mechanisms, the identification of intermediate-often highly instable--metabolites is necessary. Real life applications are reviewed in this work for aquatic samples, soils and sediments, plants, yeast, and urine.

Determination of arsenic species: A critical review of methods and applications, 2000–2003

We review recent research in the field of arsenic speciation analysis with the emphasis on significant advances, novel applications and current uncertainties.

Liquid chromatography-inductively coupled plasma mass spectrometry

It is known that while many elements are considered essential to human health, many others can be toxic. However, because the intake, accumulation, transport, storage and interaction of these different metals and metalloids in nature is strongly influenced by their specific elemental form, complete characterization of the element is essential when assessing its benefits and/or risk. Consequently, interest has grown rapidly in determining oxidation state, chemical ligand association, and complex forms of a many different elements. Elemental speciation, or the analyses that lead to determining the distribution of an element's particular chemical species in a sample, typically involves the coupling of a separation technique and an element specific detector. A large number of methods have been developed which utilize a multitude of different separation mechanisms and detection instruments. Yet, because of its versatility, robustness, sensitivity and multi-elemental capabilities, the coupling of liquid chromatography to inductively coupled plasma mass spectrometry (LC-ICP-MS) has become one of the most popular techniques for elemental speciation studies. This review focuses on the basic principles of LC-ICP-MS, its historical development and the many ways in which this technique can be applied. Different liquid chromatography separations are discussed as well as the factors that must be considered when coupling each to ICP-MS. Recent applications of LC-ICP-MS to the speciation of environmental, biological and clinical samples are also presented.

Speciation analysis of arsenic in traditional Chinese medicines by hydride generation-atomic fluorescence spectrometry

A method has been described for the determination of arsenic species (arsenite and arsenate) by hydride generation-atomic fluorescence spectrometry (HG-AFS). The experimental conditions that influence the fluorescence intensity and the reduction of arsenic were investigated and optimized, and the influences from foreign ions and their elimination were studied. The detection limit was found to be 79.7 ng L(-1). The proposed method was applied to the determination of arsenic species in water leachate of traditional Chinese medicines with a recovery range of 91.1-109.5%.