Mitigation of acrylamide formation in cookies by using Maillard reaction products as recipe modifier in a combined partial conventional baking and radio frequency post-baking process

The analysis and probabilistic health risk assessment of acrylamide level in commercial nuggets samples marketed in Iran: effect of two different cooking methods

The aim of current study was to evaluate the acrylamide level in chicken, meat and shrimp nugget samples cooked in both traditional and industrial methods using "Quick, Easy, Cheap, Effective, Rugged, and Safe" QuEChERS extraction and gas chromatography-flame-ionization detection (GC-FID). Results revealed the traditional frying method has significant effect on the increase of acrylamide compared to industrial frying method and it was also found that the different cooking temperatures and time have significant effect on increase of acrylamide formation (p < 0.05), but type of edible oils had no significant effect. The highest acrylamide level found in shrimp nuggets (27 ± 1.5 ng/g) which fried by colza oil and traditional cooking method (6 min at 220 °C), while the lowest content of acrylamide found in chicken nuggets (7.3 ± 0.1 ng/g) which fried by corn oil and industrial method (3 min at 180 °C). Monte Carlo simulation (MCS) results indicated that the trend of potential non-carcinogenic risks on THQ for children was chicken nugget (3.51E-3) > meat nugget (1.36E-3) > shrimp nugget (1.43E-4) and for adults was chicken nugget (3.49E-4) > meat nugget (1.35E-4) > shrimp nugget (1.38E-5). The health risk of acrylamide for adults and children, was considerably lower than the safe risk limits (HQ >1 and CR > 1E-4) for Iranian population.

Acrylamide in Bakery Products: A Review on Health Risks, Legal Regulations and Strategies to Reduce Its Formation

Acrylamide is a contaminant as defined in Council Regulation (EEC) No 315/93 and as such, it is considered a chemical hazard in the food chain. The toxicity of acrylamide has been acknowledged since 2002, among its toxicological effects on humans being neurotoxicity, genotoxicity, carcinogenicity, and reproductive toxicity. Acrylamide has been classified as carcinogenic in the 2A group, with human exposure leading to progressive degeneration of the peripheral and central nervous systems characterized by cognitive and motor abnormalities. Bakery products (bread, crispbread, cakes, batter, breakfast cereals, biscuits, pies, etc.) are some of the major sources of dietary acrylamide. The review focuses on the levels of acrylamide in foods products, in particular bakery ones, and the risk that resulting dietary intake of acrylamide has on human health. The evolving legislative situation regarding the acrylamide content from foodstuffs, especially bakery ones, in the European Union is discussed underlining different measures that food producers must take in order to comply with the current regulations regarding the acrylamide levels in their products. Different approaches to reduce the acrylamide level in bakery products such as the use of asparginase, calcium salts, antioxidants, acids and their salts, etc., are described in detail.

Effect of radio-frequency heating on microbial load, flavor, color, and texture profiles of Cordyceps militaris

BACKGROUND

Cordyceps militaris is a medicine and food dual-purpose mushroom extensively cultivated and consumed in East and Southeast Asia for centuries. However, it has an extremely short shelf life of 3-4 days at room temperature. C. militaris was pasteurized for 10, 20, and 30 min by radio-frequency (RF) at an electrode gap of 20 mm. The effect of RF heating on the microbial load, color, texture, and flavor attributes of C. militaris was evaluated and compared with those sterilized by conventional high-pressure steam.

RESULTS

RF heating contributed to good heating uniformity, uniform temperature distribution, and significant decrease in total microbial load. C. militaris heated by RF exhibited unnoticeable total color difference compared with unpasteurized ones, while those sterilized by high-pressure steam presented undesired and unacceptable browning. Insignificant differences in hardness and chewiness were observed after RF heating. Improvements in mushroom-like flavor occurred after 10 and 20 min of RF heating.

CONCLUSION

This study suggests that RF heating for pasteurization of edible mushrooms has promising prospects. Evaluation of RF heating on the taste and nutritional characteristics of edible mushrooms is needed in future work. © 2018 Society of Chemical Industry.

Recent developments in novel freezing and thawing technologies applied to foods

This article reviews the recent developments in novel freezing and thawing technologies applied to foods. These novel technologies improve the quality of frozen and thawed foods and are energy efficient. The novel technologies applied to freezing include pulsed electric field pre-treatment, ultra-low temperature, ultra-rapid freezing, ultra-high pressure and ultrasound. The novel technologies applied to thawing include ultra-high pressure, ultrasound, high voltage electrostatic field (HVEF), and radio frequency. Ultra-low temperature and ultra-rapid freezing promote the formation and uniform distribution of small ice crystals throughout frozen foods. Ultra-high pressure and ultrasound assisted freezing are non-thermal methods and shorten the freezing time and improve product quality. Ultra-high pressure and HVEF thawing generate high heat transfer rates and accelerate the thawing process. Ultrasound and radio frequency thawing can facilitate thawing process by volumetrically generating heat within frozen foods. It is anticipated that these novel technologies will be increasingly used in food industries in the future.

Effect of combining conventional frying with radio-frequency post-drying on acrylamide level and quality attributes of potato chips

BACKGROUND

In conventional manufacturing of potato chips, achieving an extremely low moisture content (2% by weight) in the final product necessitates prolonged exposure of potato slices to high oil temperatures. This promotes acrylamide formation and causes an exponential increase in acrylamide level toward the end of the frying process. In this regard, frying potato slices partially in hot oil followed by a radio-frequency (RF) drying treatment to selectively heat the remaining moisture appears to be a viable approach in terms of limiting acrylamide formation.

RESULTS

RF post-drying of partially fried potato slices resulted in lower acrylamide levels (80.4 ng g(-1) for control, 59.4 ng g(-1) for RF post-dried potato slices partially fried for 95 s, 54.8 ng g(-1) for RF post-dried potato slices partially fried for 80 s). This process modification also led a to 12% reduction in oil content in the final product. According to instrumental analysis results, RF post-dried samples had lower hardness and a slightly lower degree of browning in comparison to control. No significant difference (α = 0.05) was found between samples in terms of sensory characteristics.

CONCLUSION

Results demonstrate that RF post-processing may be an effective strategy for minimising acrylamide levels of potato chips without adversely affecting quality attributes.