Thermal-responsive self-healing hydrogel based on hydrophobically modified chitosan and vesicle

Vesicle Hydrogels Formed from the Perfluorononanoic Acid/Tetradecyl Dimethylaminoxide Oxide System

Vesicle hydrogels are supramolecular structures formed by the self-assembly of surfactant molecules in solution, which have great application prospects. The phase behavior of perfluorononanoic acid (C8F17COOH) and an amphoteric hydrocarbon surfactant, tetradecyl dimethylaminoxide (C14DMAO), in an aqueous solution has been studied. By changing the mixing ratio and concentration of C8F17COOH and C14DMAO, the phase diagram of the system was drawn, and interestingly, a hydrogel composed of polyhedral and spherical vesicles was successfully constructed. The formation mechanism of the polyhedral and spherical vesicle hydrogel was studied by differential scanning calorimetry (DSC), small-angle X-ray diffraction (XRD), wide-angle X-ray scattering (WAXS), and 1H nuclear magnetic resonance (1H NMR) measurements, and the rheological properties and influencing factors of the hydrogel were systematically investigated. The formation of the vesicle hydrogels in this system was considered to be caused by the "cocrystallization" of two surfactant molecular chains.

Chitosan-Based Self-Healing Hydrogel: From Fabrication to Biomedical Application

Biocompatible self-healing hydrogels are new-generation smart soft materials that hold great promise in biomedical fields. Chitosan-based self-healing hydrogels, mainly prepared via dynamic imine bonds, have attracted broad attention due to their mild preparation conditions, excellent biocompatibility, and self-recovery ability under a physiological environment. In this review, we present a comprehensive overview of the design and fabrication of chitosan-based self-healing hydrogels, and summarize their biomedical applications in tissue regeneration, customized drug delivery, smart biosensors, and three/four dimensional (3D/4D) printing. Finally, we will discuss the challenges and future perspectives for the development of chitosan-based self-healing hydrogels in the biomedical field.

Effect of Flaxseed Gum on the Textural, Rheological, and Tribological Properties of Acid-Induced Soy Protein Isolate Gels

This study aimed to investigate the effects of incorporating different concentrations of flaxseed gum (FG) into acid-induced soy protein isolate (SPI) gels. The investigation focused on assessing the effects of FG on the textural, rheological, and tribological properties of the resultant SPI gels. The results showed that adding a small amount of FG (0.05%) to the SPI gel system increased the storage modulus (G') and enhanced gelation while improving textural properties including hardness, viscosity, elasticity, and adhesion. Moreover, these gels exhibited strong water-holding capacity, a desirable property in various food products. However, when the concentration was increased to 0.3%, the WHC of the gel decreased, as did the hardness and cohesiveness. The particle size of the gel also increased with increasing concentration. Tribological investigations revealed that at 0.05-0.2% FG addition, the coefficient of friction (μ) of the composite gel was decreased compared to the pure SPI gel. In the sliding speed range of 1-100 mm/s, the coefficient of friction gradually increased with increasing concentration. When the FG concentration was 0.05%, the μ of the gel system was the lowest. In summary, low concentration of FG (0.05%) was found to play an important role in improving the properties of SPI gel, including enhancing textural, rheological, and lubricating properties.

Self-healing hydrogel as an injectable implant: translation in brain diseases

Tissue engineering biomaterials are aimed to mimic natural tissue and promote new tissue formation for the treatment of impaired or diseased tissues. Highly porous biomaterial scaffolds are often used to carry cells or drugs to regenerate tissue-like structures. Meanwhile, self-healing hydrogel as a category of smart soft hydrogel with the ability to automatically repair its own structure after damage has been developed for various applications through designs of dynamic crosslinking networks. Due to flexibility, biocompatibility, and ease of functionalization, self-healing hydrogel has great potential in regenerative medicine, especially in restoring the structure and function of impaired neural tissue. Recent researchers have developed self-healing hydrogel as drug/cell carriers or tissue support matrices for targeted injection via minimally invasive surgery, which has become a promising strategy in treating brain diseases. In this review, the development history of self-healing hydrogel for biomedical applications and the design strategies according to different crosslinking (gel formation) mechanisms are summarized. The current therapeutic progress of self-healing hydrogels for brain diseases is described as well, with an emphasis on the potential therapeutic applications validated by in vivo experiments. The most recent aspect as well as the design rationale of self-healing hydrogel for different brain diseases is also addressed.

Role of Hydrophobic Associations in Self-Healing Hydrogels Based on Amphiphilic Polysaccharides

Self-healing hydrogels have the ability to recover their original properties after the action of an external stress, due to presence in their structure of reversible chemical or physical cross-links. The physical cross-links lead to supramolecular hydrogels stabilized by hydrogen bonds, hydrophobic associations, electrostatic interactions, or host-guest interactions. Hydrophobic associations of amphiphilic polymers can provide self-healing hydrogels with good mechanical properties, and can also add more functionalities to these hydrogels by creating hydrophobic microdomains inside the hydrogels. This review highlights the main general advantages brought by hydrophobic associations in the design of self-healing hydrogels, with a focus on hydrogels based on biocompatible and biodegradable amphiphilic polysaccharides.

Multicompartment Hydrogels

Hydrogels belong to the most promising materials in polymer and materials science at the moment. As they feature soft and tissue-like character as well as high water-content, a broad range of applications are addressed with hydrogels, e.g. tissue engineering and wound dressings but also soft robotics, drug delivery, actuators and catalysis. Ways to tailor hydrogel properties are crosslinking mechanism, hydrogel shape and reinforcement, but new features can be introduced by variation of hydrogel composition as well, e.g. via monomer choice, functionalization or compartmentalization. Especially, multicompartment hydrogels drive progress towards complex and highly functional soft materials. In the present review the latest developments in multicompartment hydrogels are highlighted with a focus on three types of compartments, i.e. micellar/vesicular, droplets or multi-layers including various sub-categories. Furthermore, several morphologies of compartmentalized hydrogels and applications of multicompartment hydrogels will be discussed as well. Finally, an outlook towards future developments of the field will be given. The further development of multicompartment hydrogels is highly relevant for a broad range of applications and will have a significant impact on biomedicine and organic devices. This article is protected by copyright. All rights reserved.

Advances in multifunctional chitosan-based self-healing hydrogels for biomedical applications

Multifunctional self-healing hydrogels have recently attracted considerable interest in biomedical applications owing to their diverse properties, including self-healing, adhesion, conduction, antibacterial, and stimulus-response, which can meet various application requirements, ranging from wound dressings and delivery vehicles to the production of scaffolds for tissue repair and regeneration. As a natural polycationic polysaccharide with good biocompatibility, chitosan is widely used in hydrogel formation as there are many amino and hydroxyl groups along the chains that can actively participate in various physical effects and chemical reactions, which enable it to construct self-healing hydrogels and fulfill multiple functions. In this review, the formation of chitosan-based self-healing hydrogels and the related self-healing mechanism are summarized, including Schiff base, metal coordination, ionic and hydrogen bonds, hydrophobic and host-guest interactions, with a focus on the strategies for their multi-functionalization. In the last section, the applications of the chitosan-based self-healing hydrogels in the fields of wound dressings, delivery vehicles, scaffolds, and biological sensors are discussed. Overall, it is highly expected that this review could provide an insight into the prospective development of multifunctional self-healing hydrogels for biomedical applications.

Vesicle-Based Gel via Polyelectrolyte-Induced Adhesion: Structure, Rheology, and Response

We describe an experimental study of soft solids composed of micron-scale lipid bilayer vesicles that adhere to one another through electrostatic attraction to an oppositely charged polymer (PDADMAC). As the polymer concentration was increased, we found a fluid phase, a solid gel phase, and a gel composed of internally reorganized vesicles. Optical microscopy images showed a nearly close-packed structure of adhered vesicles that retained their closed-cell morphology. Shear rheology measurements showed that the gel phase is a solid with a modulus at the Pa scale and with linear response up to 70% strain. We found that the modulus depends on the energy per area of membrane-membrane adhesion but does not depend on the vesicle size. We further found that the gels survived osmotic stress or dilution of the adhering polymer but could be rapidly disrupted in response to the addition of strongly binding silica nanoparticles. These results demonstrate the potential for cell-sized lipid vesicles to form a solid platform that maintains the responsive properties of the membranes. Such materials may find applications as triggerable, protective coatings of delicate surfaces.

Polysaccharide-Based In Situ Self-Healing Hydrogels for Tissue Engineering Applications

In situ hydrogels have attracted increasing interest in recent years due to the need to develop effective and practical implantable platforms. Traditional hydrogels require surgical interventions to be implanted and are far from providing personalized medicine applications. However, in situ hydrogels offer a wide variety of advantages, such as a non-invasive nature due to their localized action or the ability to perfectly adapt to the place to be replaced regardless the size, shape or irregularities. In recent years, research has particularly focused on in situ hydrogels based on natural polysaccharides due to their promising properties such as biocompatibility, biodegradability and their ability to self-repair. This last property inspired in nature gives them the possibility of maintaining their integrity even after damage, owing to specific physical interactions or dynamic covalent bonds that provide reversible linkages. In this review, the different self-healing mechanisms, as well as the latest research on in situ self-healing hydrogels, is presented, together with the potential applications of these materials in tissue regeneration.

Azobenzene-grafted carboxymethyl cellulose hydrogels with photo-switchable, reduction-responsive and self-healing properties for a controlled drug release system

In this study, multifunctional hydrogels containing host-guest complex formation between azobenzene-grafted carboxymethyl cellulose (CMC-Azo) and β-cyclodextrin (CD) dimers connected by disulfide bonds with agarose for structural support were prepared. The obtained hydrogels exhibited self-healing properties by host-guest complexation as well as gel-sol phase transition in response to ultraviolet (UV) light and reducing agents. Photo-switchable properties of the hydrogels depend on changes in the complex formation of CD-dimers through the trans(450 nm) to cis(365 nm) photo-isomerization of azobenzene. The tensile and strain sweep tests confirmed that the hydrogel's self-healing ability was 79.44% and 81.59%, respectively. In addition, drug release from the hydrogels was controlled to accelerate to 80% in 3 h using UV light or reducing agent. Since the suggested photo-switchable, reduction-responsive, and self-healable hydrogels are non-cytotoxic, they can be potentially applied as biomedical materials in the development of hydrogel-based drug release systems.

An autonomously healable, highly stretchable and cyclically compressible, wearable hydrogel as a multimodal sensor

Fe³⁺/PVAA-PAM hydrogels show highly stretchable, self-healing properties and can be used as artificial ionic skin for directly monitoring human motion.

Multi-responsive, self-healing and adhesive PVA based hydrogels induced by the ultrafast complexation of Fe3+ ions

Herein, a PVA (polyvinyl alcohol)-based multi-responsive hydrogel was prepared by introducing the dynamic and reversible supramolecular complexation between polyvinyl alcohol acetoacetate (PVAA) and Fe3+ ions within 20 s at room temperature. PVAA-Fe hydrogels could be achieved by the simple mixing process of a PVAA aqueous solution with FeCl3 aqueous solution. The soluble PVAA was synthesized by the reaction of PVA with tert-butyl acetoacetate (t-BAA) via transesterification in dimethyl sulfoxide (DMSO). The chemical structure of PVAA was systematically characterized by FT-IR and 1H NMR spectroscopy. The resulting hydrogel showed excellent self-healing behavior without other external stimuli. It was also demonstrated that the PVAA-Fe hydrogel exhibited multi-responsive properties, such as responsiveness to pH, redox, light irradiation and temperature. In addition, the presence of Fe3+ ions and Cl- ions in the gel imparted the PVAA-Fe hydrogel with favorable conductivity. Therefore, the strategy for the facile preparation of the hydrogel in this work could provide a benign and versatile method for achieving multi-functional soft materials for various applications such as smart devices, logic gates, and sensors.

A pH-induced self-healable shape memory hydrogel with metal-coordination cross-links

A 4-armed PEG–DA hydrogel was fabricated, which showed regulated shape memory and self-healing properties at different pH values.

Synthesis and Biomedical Applications of Self-healing Hydrogels

Hydrogels, which are crosslinked polymer networks with high water contents and rheological solid-like properties, are attractive materials for biomedical applications. Self-healing hydrogels are particularly interesting because of their abilities to repair the structural damages and recover the original functions, similar to the healing of organism tissues. In addition, self-healing hydrogels with shear-thinning properties can be potentially used as the vehicles for drug/cell delivery or the bioinks for 3D printing by reversible sol-gel transitions. Therefore, self-healing hydrogels as biomedical materials have received a rapidly growing attention in recent years. In this paper, synthesis methods and repair mechanisms of self-healing hydrogels are reviewed. The biomedical applications of self-healing hydrogels are also described, with a focus on the potential therapeutic applications verified through in vivo experiments. The trends indicate that self-healing hydrogels with automatically reversible crosslinks may be further designed and developed for more advanced biomedical applications in the future.

Liposome Crosslinked Polyacrylamide/DNA Hydrogel: a Smart Controlled-Release System for Small Molecular Payloads

A novel stimuli-responsive hydrogel system with liposomes serving as both noncovalent crosslinkers and functional small molecules carriers for controlled-release is developed. Liposomes can crosslink polyacrylamide copolymers functionalized with cholesterol-modified DNA motifs to yield a DNA hydrogel system, due to the hydrophobic interaction between cholesteryl groups and the lipid bilayer of liposomes. Functional information encoded DNA motifs on the polymer backbones endow the hydrogel with programmable smart responsive properties. In a model system, the hydrogel exhibits stimuli-responsive gel-to-sol transformation triggered by the opening of DNA motifs upon the presence of a restriction endonuclease enzyme, EcoR I, or temperature change, realizing the controlled-release of liposomes which are highly efficient carriers of active small molecules payloads. Two active molecules, 1,1-dioctadecyl-3,3,3,3-tetramethylindodicarbocyanine perchlorate (DiIC18(5)) and calcein, are chosen as the hydrophobic and hydrophilic model payloads, respectively, to address the feasibility of the releasing strategy. Moreover, the hydrogel exhibits injectable property as well as self-recovery behaviors.

Self-Healing of Polymer in Acidic Water toward Strength Restoration through the Synergistic Effect of Hydrophilic and Hydrophobic Interactions

To improve reliability, durability, and reworkability of bulk polymers utilized in ubiquitous acidic water, the authors develop a novel hyperbranched polymer capable of self-healing and recycling in a low-pH aqueous environment. The hyperbranched polymer has many hydrophilic and hydrophobic terminal groups. When it is damaged in acidic water, the hydrophilic groups are protonated, forming hydrogen bonds, and closing the crack. Meanwhile, hydrophobic interactions of hydrophobic groups are gradually established across the interface because of the intimate contact of the cracked surface, further reinforcing the rebonded portion. The amphiphilic structure proves to meet both the thermodynamic and kinetic requirements for autonomous rehabilitation. As a result, the unfavored water, which used to impede adhesion between hydrophobic polymeric materials, turns into a positive aid to crack healing. The mechanism involved is carefully analyzed and verified in terms of micro- and macroscopic techniques. The proposed operating environment-oriented design of the stimulus-responsive macromolecule may help to broaden the family of underwater self-healing polymers and their application scope.

Design and characterization of a microbial self-healing gel for enhanced oil recovery

Due to the heterogeneity of rock layers, the poor volumetric sweep efficiency of water and an invalid cycle have emerged as major problems in crude oil production.

CO2-responsive self-healable hydrogels based on hydrophobically-modified polymers bridged by wormlike micelles

A versatile and simple strategy is proposed to design CO₂-responsive self-healable hydrogels based on hydrophobically-modified polymers bridged by worm like micelles.

A nanoporous photosensitizing hydrogel based on chitosan cross-linked by zinc phthalocyanine: an injectable and pH-stimuli responsive system for effective cancer therapy

Although zinc phthalocyanines (ZnPcs) have promising applications in photodynamic therapy (PDT), their therapeutic efficacy suffer from their low solubility in the biological environment and their lack of tumor selectivity.

Composites of Polymer Hydrogels and Nanoparticulate Systems for Biomedical and Pharmaceutical Applications

Due to their unique structures and properties, three-dimensional hydrogels and nanostructured particles have been widely studied and shown a very high potential for medical, therapeutic and diagnostic applications. However, hydrogels and nanoparticulate systems have respective disadvantages that limit their widespread applications. Recently, the incorporation of nanostructured fillers into hydrogels has been developed as an innovative means for the creation of novel materials with diverse functionality in order to meet new challenges. In this review, the fundamentals of hydrogels and nanoparticles (NPs) were briefly discussed, and then we comprehensively summarized recent advances in the design, synthesis, functionalization and application of nanocomposite hydrogels with enhanced mechanical, biological and physicochemical properties. Moreover, the current challenges and future opportunities for the use of these promising materials in the biomedical sector, especially the nanocomposite hydrogels produced from hydrogels and polymeric NPs, are discussed.

A shape memory hydrogel induced by the interactions between metal ions and phosphate

A novel ferric-phosphate induced shape memory (SM) hydrogel is prepared by the one-step copolymerization of isopropenyl phosphonic acid (IPPA) and acrylamide (AM) in the presence of a crosslinker polyethylene glycol diacrylate (PEGDA). Different from the traditional SM hydrogels, our SM hydrogel can be processed into various shapes as needed and recovers to its original form in ‘multiconditions’ such as in the presence of a reducing agent or in the presence of a competitive complexing agent. This unique feature is attributed to the fact that the oxidized ferric ions show a high complexation ability with phosphate groups of IPPA, which acts as a physical crosslinker to form the secondary networks within the hydrogels to induce the shape memory effect. The memory behavior was totally reversible, owing to Fe3+ that can be reduced to Fe2+ and extracted by the complexing agent. Particularly, the SM hydrogels exhibit controllable and good mechanical characteristics by introduction of the ferric ions, i.e., the elastic modulus can increase from 2 kPa to 70 kPa dramatically. Learning from biological systems, phosphate-metal ion based hydrogels could become an attractive candidate for various biomedical and environmental applications.