The effect of flexion alignment in total hip arthroplasty with a cementless tapered-wedge femoral stem

Impact of surgical approaches on stem position and hidden blood loss in total hip arthroplasty: minimally invasive vs. posterolateral

BACKGROUND

The surgical approach impacts the outcomes and recovery after total hip arthroplasty (THA), and approaches may affect the stem positioning. Contrary to the general concept of minimally invasive surgery, the direct anterior approach (DAA) results in more intraoperative blood loss. Therefore, the objective of this study was to compare stem positioning and hidden blood loss (HBL) among three surgical approaches: the minimally invasive DAA, Orthopadische Chirurgie Munchen (OCM), and the traditional posterolateral approach (PLA).

METHODS

A total of 201 patients undergoing their first non-cemented THA using the DAA, OCM, and PLA were included in the study. General demographic data, stem alignment, and blood loss were evaluated. Specific comparison measurements included femoral neck anteversion, femoral stem anteversion, alignment of the stem in coronal and sagittal planes, proximal and distal medullary ratios, and femoral offset. Blood loss was measured by calculating Intraoperative Blood Loss ( IBL), visible blood loss (VBL), and hidden blood loss (HBL).

RESULTS

There were no significant differences in age, gender, body mass index, preoperative diagnosis, or femoral Dorr classification among the three groups. The mean surgical time was longer for the DAA and OCM compared to the PLA (P < 0.01). IBL was highest in the DAA group and lowest in the PLA (P < 0.05). Postoperative stem anteversion were significantly different among the groups, with the DAA showing the greatest anteversion difference (P < 0.05). There was no difference in the stem coronal alignment. However, there were more valgus and varus implants in the sagittal plane for the DAA and OCM. The femoral offset reduction was less optimal in the DAA and OCM groups (P < 0.05). The proximal and distal medullary ratios were lower in the DAA and OCM (P < 0.05). HBL was significantly lower in the DAA and OCM compared to the PLA (P < 0.05).

CONCLUSION

Minimally invasive approaches such as DAA and OCM offer advantages in muscle and soft tissue preservation, leading to reduced HBL compared to the conventional PLA. However, these approaches present challenges in femoral stem positioning and longer surgical times.

Analysis on association between sagittal stem alignment and early functional and radiological outcome following primary cementless total hip replacement

INTRODUCTION

Accurate reconstruction of hip anatomy and biomechanics is mandatory for achieving good clinical outcomes following total hip replacement (THR). Optimal stem alignment is essential to avoid impingement or loosening. This study aimed to evaluate sagittal stem position following cementless THR and its relationship with patient's functional outcome and post-operative radiological parameters.

METHOD

We performed analytical observational study with cross-sectional design on 71 hips (67 patients, ranged 18-85 years old) that underwent primary cementless THR in two orthopedic centers in Jakarta, Indonesia. All hips were operated through either anterolateral or posterior approach using either extended/full-coating wedge-tapered stem or proximal-coated wedge-tapered stem. Clinical outcomes were evaluated at follow-up time using mHHS questionnaire, VAS level of thigh pain, and hip ROM. Stem sagittal alignment and other radiological parameters, including combined anteversion and offset, were measured from conventional radiograph.

RESULTS

There were no significant differences on mHHS score, VAS level on thigh pain, and ROM between stem alignment groups. Post-operative anteversion and offset of the implant were not affected by the stem sagittal position. All influencing factors have significant effect on sagittal stem alignment. Linear regression test on femur morphology showed 0.69° increase in stem posterior tilt for every 1° increase in the anterior bowing (coeff. = 0.502).

CONCLUSION

Stem tilting in sagittal plane did not affect patient's functional outcome or post-operative radiological parameters. In addition, for every degree of increased anterior femoral bowing, 0.69° increase in posterior stem tilting can be expected.

Effect of short stem alignment on initial fixation, stress transfer, and failure risk

BACKGROUND

Short stems are advantageous for revision as they preserve autogenous bone. At present, the method of short-stem installation is determined based on the surgeon's experience.

OBJECTIVE

To provide the guideline for installing a short stem, we aimed to investigate the alignment effect on the initial fixation of the stem, stress transfer, and the risk of failure numerically.

METHODS

Models in which the caput-collum-diaphyseal (CCD) angle and flexion angle were hypothetically changed based on the two clinical cases of hip osteoarthritis were analyzed using the non-linear finite element method.

RESULTS

The medial settlement of the stem increased in the varus model and decreased in the valgus model. With varus alignment, the stresses acting on the femur were high in the distal to the femoral neck. In contrast, the stresses in the proximal to the femoral neck tend to be higher with valgus alignment, although the difference in the femur stress between varus and valgus alignment was slight.

CONCLUSION

Both initial fixation and stress transmission are lower when the device was placed in the valgus model than in the actual surgical case. In order to obtain initial fixation and suppress stress shielding, it is essential to extend the contact area between the medial portion of the stem and the femur along the bone axis, and to ensure adequate contact between the lateral portion of the stem tip and the femur.

Clinical and radiographic outcomes of primary total hip arthroplasty with the revelation hip system using density mapping

The Revelation Hip System is a cementless stem with a lateral flare concept. Stable fixation is achieved by fitting the stem to the medullary cavity of the proximal lateral femoral cortex. Patients who have undergone total hip arthroplasty using the Revelation Hip System show good postoperative clinical and radiographic outcomes. However, to the best of our knowledge, no study has reported the relationship between stem fitting and clinical or radiological outcomes after the surgery. In the present study, we investigated the relationship between stem fitting and clinical or radiological outcomes after total hip arthroplasty (THA) using the Revelation Hip System. In this study, 28 hips of 26 patients who were treated with the Revelation Hip System for osteoarthritis, osteonecrosis of the femoral head, rheumatoid arthritis, and rapidly destructive coxarthropathy and were followed up for > 5 y were enrolled. These patients were divided into two groups, including the rest fit group (11 hips, group R) and the control group (17 hips, group C), according to the results of the density mapping analysis. In group R, the lateral side of the stem fits on the medullary cavity of the proximal lateral femoral cortex, while in group C, the lateral side of the stem did not fit. Radiographic results showed no significant differences between the groups in terms of stem alignment, subsidence, and stress shielding around the cup. The incidence of stress shielding around the stem in zone 7 was not significant but tended to be higher in group R than in group C (p = 0.052). Clinical outcomes showed no significant differences between group R and group C in terms of the Harris hip score, the Japanese Orthopaedic Association (JOA) score, and the Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ) total score. However, pain complaints that were assessed by patient-reported outcomes using the 36-Item Short Form Health Survey (SF-36) bodily pain and vitality subscales and the JHEQ pain subscale were significantly higher in group R than in group C at the final follow-up. These results suggest that some patients had pain complaint even if the stems were inserted as per the concept after THA with the Revelation Hip System.Trial Registration911.

The association of postoperative global femoral offset with total hip arthroplasty outcomes

Global femoral offset (GFO) and femoral offset (FO) reportedly affect outcomes following total hip arthroplasty (THA). However, FO assessed using plain radiography is affected by internal and external rotations of the hip joint. We investigated the relationship between leg length discrepancy and Harris hip score (HHS), and their influence on acetabular offset (AO), FO, GFO, anterior femoral offset, and outcomes after THA. We retrospectively evaluated 140 patients with hip osteoarthritis who underwent THA. A three-dimensional (3D) pelvis and femur model created from computed tomography (data using ZedHip software was used to investigate these parameters. The modified (m)HHS scores were significantly improved from 49.0 to 88.8 in total mHHS, 20.0-44.5 in pain, and 28.9-44.4 points in function. Significant correlations were found between the differences in AO, FO, GFO, and pain score in binominal, with maximum values of - 1.24, + 1.54, and + 0.90 mm/100 cm body height, respectively. The maximum value of GFO and mHHS in binominal was + 1.17 mm/100 cm body height (BH). The optimal range of difference of GFO was - 1.75 to 4.09 mm/100 cm BH. This is the first report using a 3D method for assessing FO. Preoperative planning using the system could improve postoperative function.

Middle-term outcome and complications after primary total hip arthroplasty using a contemporary titanium tapered wedge cementless femoral stem

The purpose of this study is to evaluate the results and intraoperative or postoperative complications of primary total hip arthroplasty (THA) using a contemporary tapered wedge titanium femoral component. A total of 213 THAs in 187 patients were followed up more than 5 years (mean, 102 months ; range, 60-150). The mean age at surgery was 64.2 years (range, 20?89 years). These patients were clinically evaluated using the JOA scoring system and radiographically host bone reactions around the implants, as well as femoral loosening. The mean JOA score improved from 49 (range, 21?75) to 92 (range, 59?100). All 12 patients with poor results (JOA < 75) coexisted with cerebral, spinal, joint, and musculoskeletal disorders. At the final follow-up, implant survival was 100%. Complications occurred in 23 hips. They consisted of 12 hips with intra-operative fractures, 2 hips with sciatic nerve palsy, one hip with infections, 3 hips with recurrent dislocations, and 8 hips with aseptic cup loosening. In conclusion, we have shown excellent survival rate of the contemporary tapered wedge stem in primary THA ; however, patients with coexisting diseases could not acquire sufficient improvement in hip function and ambulatory ability. J. Med. Invest. 70 : 471-475, August, 2023.

A double tapered fully hydroxyapatite-coated stem has less contact area to femoral cortical bone than a tapered-wedge stem: a three-dimensional computed tomography-based density mapping analysis

INTRODUCTION

It is clinically important to analyze the initial contact state between an implant and femoral cortical bone as it affects clinical outcomes, such as stress shielding, stem subsidence, thigh pain, and patient-reported outcomes after total hip arthroplasty. Whether the initial contact state of a double-tapered fully hydroxyapatite (HA)-coated stem is achieved with the preserved cancellous or cortical bone remains to be established. This study aimed to compare the contact area with the femoral cortical bone between a double-tapered fully HA-coated stem (HA group) and a tapered wedge cementless stem (TW group) using three-dimensional computed tomography (3DCT)-based templating software.

MATERIALS AND METHODS

Forty-seven total hip arthroplasties in the HA and TW groups each were retrospectively analyzed. The contact area between the implant and femoral cortical bone in the whole stem and at each Gruen zone was measured using density mapping with 3DCT-based templating software.

RESULTS

The demographic data were not significantly different between the two groups. The contact area in the whole stem area was lower in the HA group (HA 5.4 ± 1.8% vs. TW 9.0 ± 4.8%, p < 0.01). The HA group had a lower contact area in zone 2 (HA 6.7 ± 6.5% vs. TW 15.6 ± 10.8%, p < 0.01) and zone 6 (HA 1.8 ± 3.5% vs. TW 6.3 ± 3.6%, p < 0.01) than the TW group. The implant type (β = 0.41, p < 0.01) and stem coronal alignment (β = - 0.29, p < 0.01) were significant predictors of the contact area in the whole stem area in a multiple regression analysis (adjusted R² = 0.27, p < 0.01).

CONCLUSION

The contact area of the double-tapered fully HA-coated stem was significantly lower than that of the tapered wedge cementless stem.

Imaging in Hip Arthroplasty Management-Part 1: Templating: Past, Present and Future

Hip arthroplasty is a frequently used procedure with high success rates. Its main indications are primary or secondary advanced osteoarthritis, due to acute fracture, osteonecrosis of the femoral head, and hip dysplasia. The goals of HA are to reduce pain and restore normal hip biomechanics, allowing a return to the patient’s normal activities. To reach those goals, the size of implants must suit, and their positioning must meet, quality criteria, which can be determined by preoperative imaging. Moreover, mechanical complications can be influenced by implant size and position, and could be avoided by precise preoperative templating. Templating used to rely on standard radiographs, but recently the use of EOS^® imaging and CT has been growing, given the 3D approach provided by these methods. However, there is no consensus on the optimal imaging work-up, which may have an impact on the outcomes of the procedure. This article reviews the current principles of templating, the various imaging techniques used for it, as well as their advantages and drawbacks, and their expected results.

The role of the femoral component orientation on dislocations in THA: a systematic review

INTRODUCTION

Dislocation remains a major complication in total hip arthroplasty (THA), in which femoral component orientation is considered a key parameter. New imaging modalities and definitions on femoral component orientation have been introduced, describing orientation in different planes. This study aims to systematically review the relevance of the different orientation parameters on implant stability.

METHODS

A systematic review was performed according to the PRISMA guidelines to identify articles in the PubMed and EMBASE databases that study the relation between any femoral component orientation parameters and implant stability in primary THA.

RESULTS

After screening for inclusion and exclusion criteria and quality assessment, nine articles were included. Definitions to describe the femoral component orientation and methodologies to assess its relevance for implant stability differed greatly, with lack of consensus. Seven retrospective case-control studies reported on the relevance of the transversal plane orientation: Low femoral- or low combined femoral and acetabular anteversion was statistical significantly related with more posterior dislocations, and high femoral- or combined femoral and acetabular anteversion with anterior dislocations in two studies. There were insufficient data on sagittal and coronal component orientation in relation to implant stability.

CONCLUSION

Because of incomparable definitions, limited quality and heterogeneity in methodology of the included studies, there is only weak evidence that the degree of transverse component version is related with implant stability in primary THA. Recommendations about the optimal orientation of the femoral component in all three anatomical planes cannot be provided. Future studies should uniformly define the three-dimensional orientation of the femoral component and systematically describe implant stability.

Limited effects on patient outcomes of conjoint tendon release in anterolateral muscle-sparing total hip arthroplasty

Background

The anterolateral muscle-sparing total hip arthroplasty (THA) in the supine position is advantageous owing to the very low-dislocation rate and excellent leg length discrepancy control. However, femur exposure is challenging. Although the conjoined external rotators tendon (CERT) release is effective in improving femoral access, the effects on clinical outcomes remain unclear. The purpose of this study was to evaluate the clinical and radiographic results of CERT release in the anterolateral muscle-sparing THA approach.

Methods

The study was performed as a retrospective cohort study and included 85 hips in 85 patients who underwent primary anterolateral THA. Clinical and radiographic outcomes were investigated 6 months and 1 year after THA (CERT-preserved and non-released patients). The Japanese Orthopaedic Association (JOA) hip score, JOA Hip-disease Evaluation Questionnaire (JHEQ), forgotten joint score (FJS), and the 36 short-form questionnaires (SF-36 mental and physical) were evaluated. The leg length discrepancy, cup inclination and stem orientation were evaluated with radiographs.

Results

Among all the included hips, 37 patients (43.5%) retained the CERT, and 48 patients (56.5%) included the released CERT. There were no significant differences in the JOA hip scores, JHEQ, FJF-12 and SF-36 between the released and non-released groups. There were significant differences in sagittal stem alignments between groups.

Conclusion

The CERT release in anterolateral muscle-sparing THA has a limited effect on post-operative clinical outcomes. The CERT release improved the femur exposure and is more invasive than the preserved CERT. We infer that the CERT should be maintained in patients with a wide range of motions, and release the CERT in inadequate femur canal preparation cases.

Correlation between lag screw route and the ideal insertion point of the intramedullary nail

Understanding the morphology of the superior aspect of the proximal femur is critical for treating femoral fracture. We assessed the correlation among the ideal insertion point of the femoral nail, femur head-neck axis, and native anteversion. One hundred patients with normal femurs were included in this study. Computed tomography (CT) images of the proximal femur superior aspect and amount of native anteversion were acquired. Generalised Procrustes analysis showed the morphological characteristics of the superior proximal femur according to native anteversion amount. Morphological characteristics were represented by 4 parameters; the correlation between parameters and native anteversion was investigated using CT data. The passing point of the line from the proximal femoral canal parallel to the native anteversion at the greater trochanter was located more posteriorly (mean 35.6%); the passing point of native anteversion was posterior in the femoral neck and head, although the line of the head-neck centre passed more anteriorly at the greater trochanter (mean 67.5%). This posterior translation was significantly associated with native anteversion amount. Morphometric geometric analysis showed that the lag screw could not pass head-neck centre from the nail inserted into proximal femoral canal. Anterior insertion of the nail was needed for positioning the lag screw centre.

Difference in tapered wedge stem alignment between supine and lateral position in cementless total hip arthroplasty via modified Watson-Jones anterolateral approach

BACKGROUND

Whether different body positions during surgery affect postoperative stem alignment in total hip arthroplasty (THA) remains unclear. The purpose of this study was to clarify differences in tapered wedge stem alignment between supine and lateral positions in THA under the modified Watson-Jones anterolateral approach.

METHODS

We reviewed 242 consecutive, primary cementless THAs performed with ceramic-on-cross-linked polyethylene via the modified Watson-Jones approach in either supine or lateral positions between 2009 and 2015 (supine group: 113 cases; lateral group: 129 cases). No specific reasons to select supine or lateral positions for the surgery were given during the study period. Computed tomography was performed pre- and postoperatively to measure preoperative femoral anteversion and postoperative stem anteversion, respectively. Stem alignment in coronal and sagittal planes was also evaluated.

RESULTS

Mean difference in stem anteversion and femoral anteversion was 8.6 ± 9.4 in the supine position and 13.0 ± 11.4 in the lateral position (p = 0.0013). Although no significant difference was seen between groups for stem alignment in the coronal plane, flexed implantation was more likely in the supine group (46/113, 40.7%) than in the lateral group (20/129, 15.5%). A significant correlation was found between femoral anteversion and stem anteversion in both the supine and lateral groups (r = 0.68, p < 0.0001 and r = 0.52, p < 0.0001, respectively).

CONCLUSION

Although stem anteversion was more strongly correlated with femoral anteversion in the supine position than in the lateral position, neutral position in the sagittal plane was more likely to be found with the lateral position than with the supine position. Surgeons can achieve ideal stem positioning by considering these results in the modified Watson-Jones approach in both the supine and lateral positions.

The use of density mapping in the analysis of thigh pain after total hip arthroplasty in patients with well-fixed tapered wedge stems

PURPOSE

The mechanisms underlying thigh pain in patients with well-fixed cementless femoral components after total hip arthroplasty (THA) remains unclear. We hypothesized that the thigh pain is correlated with the initial contact state of the stem and aimed to investigate the relation between thigh pain and the initial contact state.

MATERIALS AND METHODS

A total of 209 hips of 184 patients were analysed in this retrospective case-control study. The patients were divided into a thigh pain group (n = 13 hips) and a control group (without thigh pain, n = 196). Post-operative stem contact images were three-dimensionally visualized by a density mapping function using computed tomography data, which quantified the stem contact area according to Gruen zones. Thigh pain was defined as anterior or anterolateral pain upon loading at 3-month post-operatively.

RESULTS

Thirteen hips (6.2%) had thigh pain; however, all the hips demonstrated stable bony ingrowth radiographically. The thigh pain group had a significantly lower contact area in zone 2 (p = 0.014). The multivariate logistic regression analysis showed that the contact area of zone 2 was negatively correlated with thigh pain [odds ratio (OR): 0.858, p = 0.018], and the canal flare index was negatively correlated with the development of thigh pain (OR: 0.336, p = 0.026).

CONCLUSIONS

We identified an association between the initial contact state and post-operative thigh pain. Our data demonstrated that proper lateral contact prevents the occurrence of thigh pain in THA using a tapered wedge stem.

Achievement of optimal implant alignment using taper wedge stems with cup-first THA through the MIS antero-lateral approach

PURPOSE

Combined anteversion (CA) technique (stem-first procedure) has become generally accepted as an ideal means to achieve optimal CA value in THA. However, we hypothesized that CA technique for patients with various native femoral anteversions could pose a risk of anterior or posterior cup protrusion. In the present study, we examined whether it is possible to use the taper wedge stem to change the stem version to achieve optimal CA while avoiding cup protrusions with the cup-first procedure through minimally invasive (MIS) antero-lateral approach.

METHODS

Eighty-one patients underwent cup-first THA with a taper wedge stem. The acetabular cup was placed following the preoperative planning of the cup alignment to avoid anterior cup protrusions using CT-based navigation. Following the CA theory, anteversion of the taper wedge stem was changed to the target anteversion from the patient's native femoral anteversion. The native femoral anteversion, the change in version angle of the stem, postoperative CA and the length of anterior cup protrusions were evaluated in postoperative CT measurements.

RESULTS

The native femoral anteversion averaged 25.7° ± 8.9° (range 8°-45°). Cases with increased and decreased stem anteversion were observed in 42 hips (51.8%) and 33 hips (40.7%), respectively. The amount of increased and decreased version angles averaged 7.7° ± 4.8° (range 2°-21°) and 7.8° ± 5.1° (range 2°-20°), respectively. Postoperative CA values averaged 36.7° ± 3.4° (range 29.4°-44.2°) and anterior cup protrusion length averaged 2.0 mm ± 2.6 mm (0 ~ 8.8 mm) in axial view and 0.4 mm ± 1.0 mm (0 ~ 3.6 mm) in sagittal view. Anterior cup protrusion of more than 10 mm was not observed in any hips.

CONCLUSION

This procedure can be considered as an option to achieve optimal CA anteversion while avoiding anterior cup protrusion in THA.

Anatomic stem inserted according to native anteversion could reproduce the native anterior distance of the femoral head and decrease bony impingement in total hip arthroplasty

PURPOSE

To investigate whether anatomic and straight stems could reproduce the anteroposterior distance (AD) of the native femoral head and evaluate the effect of AD of the femoral head on range of motion (ROM) and bony impingement.

METHODS

This retrospective simulation study included 64 patients who had undergone primary total hip arthroplasty between 2012 and 2014. Using computed tomography (CT)-based templating software, anatomic and straight stems were inserted with same alignment. AD of the head centre was compared between the two stems and native anatomy. Furthermore, post-operative ROM was calculated, and correlation between AD and ROM was assessed.

RESULTS

There was a strong positive correlation between native anteversion (mean 21.9°) and anatomic stem anteversion (mean 22.5°) (R = 0.975, P < 0.001). There was no significant difference in AD between the native and anatomic stems (mean 37.7 and 38.8 mm, respectively), but AD of the straight stem was significantly lower than that of the native and anatomic stems. The straight stem showed a significantly lower ROM in flexion and internal rotation angles with 90° flexion (IR) than the anatomic stem (P < 0.05 and P < 0.001, respectively). AD showed a stronger correlation with ROM of IR than with stem anteversion.

CONCLUSIONS

The anatomic stem could reproduce AD of the native femoral head centre, but the head centre of the straight stem in the same anteversion with anatomic stem translated significantly posterior, significantly decreasing the ROM of flexion and IR and increasing bony impingement of IR. To avoid bony impingement and acquire sufficient ROM, reproducing AD was important.