A sensitive and reliable rutin electrochemical sensor based on palladium phthalocyanine-MWCNTs-Nafion nanocomposite

Ultrasensitive Determination of Natural Flavonoid Rutin Using an Electrochemical Sensor Based on Metal-Organic Framework CAU-1/Acidified Carbon Nanotubes Composites

Rutin, a natural flavonol glycoside, is widely present in plants and foods, such as black tea and wheat tea. The antioxidant and anti-inflammatory effects of flavonoids are well known. In this study, a new electrochemical rutin sensor was developed using multiwalled carbon nanotubes/aluminum-based metal-organic frameworks (MWCNT/CAU-1) (CAU-1, a type of Al-MOF) as the electrode modification material. The suspension of multiwalled carbon tubes was dropped on the surface of the GCE electrode to make MWCNT/GCEs, and CAU-1 was then attached to the electrode surface by electrodeposition. MWCNTs and CAU-1 were characterized using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Due to the synergistic effect of CAU-1 and MWCNT-COOH, the prepared sensor showed an ultrasensitive electrochemical response to rutin. Under optimized conditions, the sensor showed a linear relationship between 1.0 × 10^-9~3.0 × 10^-6 M with a detection limit of 6.7 × 10^-10 M (S/N = 3). The sensor also showed satisfactory stability and accuracy in the detection of real samples.

Recent advances in electroanalytical drug detection by porphyrin/phthalocyanine macrocycles: developments and future perspectives

Porphyrins and phthalocyanines used to construct sensors for electroanalytical drug detection.

Surfactant-free solvothermal synthesis of Cu-MOF via protonation-deprotonation approach: A morphological dependent electrocatalytic activity for therapeutic drugs

A copper-1,4-naphthalenedicarboxylic acid-based organic framework (Cu-NDCA MOF) with different morphologies was synthesized by solvothermal synthetic route via a simple protonation-deprotonation approach. The synthesized Cu-NDCA MOFs were analyzed by diverse microscopic and spectral techniques. The FE-SEM and TEM image results exhibited the flake-like (FL), partial anisotropic (PAT), and anisotropic (AT)-Cu-NDCA MOFs formation obtained at different pH (3.0, 7.0, and 9.0) of the reaction medium. The AT-Cu-NDCA MOF/GC electrode not only increases the electroactive surface area but also boosts the electron transfer rate reaction compared to other modified electrodes (PAT- and FL-Cu-NDCA MOFs/GCEs). Under the optimized conditions, the modified electrode (AT-Cu-NDCA MOF) exhibited a sharp oxidation peak (+ 0.46 V vs. Ag/AgCl) and higher current response for rutin. The electrode provides a wide linear range from 1 × 10^-9 to 50 × 10^-6 M, a low detection limit of 1.21 × 10^-10 M, LOQ of 0.001 μM, and sensitivity of 0.149 μA μM^-1 cm^-2. The AT-Cu-NDCA MOF/GC electrode exhibited good stability (RSD = 3.52 ± 0.02% over 8 days of storage), and excellent reproducibility (RSD = 2.62 ± 0.02% (n = 3)). The modified electrode was applied to the determination of rutin in apple, orange, and lemon samples with good recoveries (99.79-99.91, 99.24-99.69, and 99.53-99.83, respectively). Graphical abstract Anisotropic structure of Cu-NDCA MOFs and its modification on glassy carbon electrode for ultra-sensitive determination of rutin in fruit samples.

Fabrication of ZIF-67@three-dimensional reduced graphene oxide aerogel nanocomposites and their electrochemical applications for rutin detection

Three-dimensional reduced graphene oxide aerogel (3D rGA) was synthesized by hydrothermal method and cobalt imidazolate framework-67 (ZIF-67) was further grown in situ on the 3D rGA matrix directly. The resultant ZIF-67@3D rGA nanocomposite was checked by different techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectrophotometry (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and thermo-gravimetric analysis (TGA). The presence of 3D rGA acted as the backbone for the loading of ZIF-67, and the resultant ZIF-67@3D rGA nanocomposite exhibited an interconnected porous structure with large surface area and high conductivity due to synergistic effects, which was applied to the electrode modification and used for rutin detection. The developed method showed excellent performance with a wider linear range (0.05-200.0 μmol/L) and lower detection limit (0.028 ± 0.0016 μmol/L, S/N=3). Various samples including the compounded rutin tablets and onions were analyzed by this modified electrode with satisfactory results.

Application of Electrochemical Sensors Based on Carbon Nanomaterials for Detection of Flavonoids

Flavonoids have a variety of physiological activities such as anti-free radicals, regulating hormone levels, antibacterial factors, and anti-cancer factors, which are widely present in edible and medicinal plants. Real-time detection of flavonoids is a key step in the quality control of diverse matrices closely related to social, economic, and health issues. Traditional detection methods are time-consuming and require expensive equipment and complicated working conditions. Therefore, electrochemical sensors with high sensitivity and fast detection speed have aroused extensive research interest. Carbon nanomaterials are preferred material in improving the performance of electrochemical sensing. In this paper, we review the progress of electrochemical sensors based on carbon nanomaterials including carbon nanotubes, graphene, carbon and graphene quantum dots, mesoporous carbon, and carbon black for detecting flavonoids in food and drug homologous substances in the last four years. In addition, we look forward to the prospects and challenges of this research field.

Triplet photosensitizer-nanotube conjugates: synthesis, characterization and photochemistry of charge stabilizing, palladium porphyrin/carbon nanotube conjugates

The ability of a triplet photosensitizer to generate long-lived charge separated states, in contrast to traditionally used singlet photosensitizers, in covalently functionalized single-walled carbon nanotube hybrids has been investigated. Enriched single-walled carbon nanotubes with two diameters, namely (6,5) and (7,6), were covalently modified to carry a charge-stabilizing triplet photosensitizer derived from a palladium porphyrin. The nanohybrids were fully characterized and the presence of intramolecular interactions between the porphyrin and nanotubes was established from various spectroscopic, imaging, electrochemical and thermochemical studies. Photoluminescence of palladium porphyrin was found to be quantitatively quenched in the presence of covalently appended SWCNTs and this quenching is due to excited state charge separation and has been established by femtosecond transient absorption studies. Owing to the presence of the triplet photosensitizer, the charge separated states lasted over 3 ns, i.e., much longer than those reported earlier for singlet photosensitizer-derived nanotube hybrids. The nanohybrids also exhibited efficient photocatalytic behavior in experiments involving electron pooling of one-electron reduced methyl viologen in the presence of a sacrificial electron donor. Higher yields of photoproducts were achieved from the present donor-acceptor nanohybrids when compared with those of singlet photosensitizer-derived nanohybrids, more so for (6,5) nanotube derived hybrids compared to (7,6) nanotube derived hybrids. The present findings highlight the importance of triplet photosensitizer derived nanohybrids in artificial photosynthesis of charge separation and photocatalytic applicatons.

A magnetic nanocomposite prepared from electrospun CoFe2O4 nanofibers and graphene oxide as a material for highly sensitive determination of rutin

A magnetic bar carbon paste electrode (MBCPE) modified with cobalt ferrite magnetic electrospun nanofibers (NFs) and graphene oxide (GO) is described for the electrochemical determination of rutin. The NFs were prepared by electrospinning using a solution that contains poly(vinyl pyrrolidone) (PVP) and Co(II) and Fe(III) nitrates as metal sources. Carbon paste was prepared by hand mixing GO, CoFe₂O₄ NFs and graphite. This paste was then packed into the end of a glass tube and a very small magnetic bar was inserted into the tube to be coated with the carbon paste to provide a magnetic field. The MBCPE was used to attract the magnetic nanofibers to the electrode surface. Cyclic voltammetry and differential pulse voltammetry techniques were used to study the electrochemical behavior of rutin on the modified MBCPE at pH 2.5. The electrocatalytic current, best measured at a potential of around 0.5 V (vs. Ag/AgCl), varies with the rutin concentration in two linear ranges, viz. from 0.001-0.1 nM and from 1.0-100 nM, with a 0.94 pM detection limit. The electrode was successfully applied to the determination of rutin in lemon, red apple, lime and orange juices. Graphical abstractSchematic representation of a modified magnetic bar carbon paste electrode for detection of rutin. To achieve the modified electrode, electrospun CoFe₂O₄ nanofibers, graphene oxide and a very small magnetic bar are packed into the end of a glass tube.

Simple synthesis of CoSn(OH)6 nanocubes for the rapid electrochemical determination of rutin in the presence of quercetin and acetaminophen

Schematic presentation of the synthesis of CoSn(OH)₆ nanocubes modified with SPCE towards the electrochemical detection of rutin.

Palladium Supported on an Amphiphilic Triazine-Urea-Functionalized Porous Organic Polymer as a Highly Efficient Electrocatalyst for Electrochemical Sensing of Rutin in Human Plasma

Metal nanoparticle-containing porous organic polymers have gained great interest in chemical and pharmaceutical applications owing to their high reactivity and good recyclability. In the present work, a palladium nanoparticle-decorated triazine-urea-based porous organic polymer (Pd@TU-POP) was designed and synthesized using 1,3-bis(4-aminophenyl)urea with cyanuric chloride and palladium acetate. The porous structure and physicochemical properties of the electrode material Pd@TU-POP were observed using a range of standard techniques. The Pd@TU-POP material on the electrode surface showed superior sensing ability for rutin (RT) because the Pd dispersion facilitated the electrocatalytic performance of TU-POP by reducing the overpotential of RT oxidation dramatically and improving the stability significantly. Furthermore, TU-POP provides excellent structural features for loading Pd nanoparticles, and the resulting Pd@TU-POP exhibited enhanced electron transfer and outstanding sensing capability in a linear range between 2 and 200 pM having a low detection value of 5.92 × 10^-12 M (S/N = 3). The abundant porous structure of Pd@TU-POP not only provides electron transport channels for RT diffusion but also offers a facile route for quantification sensing of RT with satisfactory recoveries in aqueous electrolyte containing human plasma and red wine. These data reveal that the synthetic Pd@TU-POP is an excellent potential platform for the detection of RT in biological samples.

A sensitive electrochemical sensor based on ZIF-8–acetylene black–chitosan nanocomposites for rutin detection

Herein, we fabricated a sensitive rutin electrochemical sensor via modifying glassy carbon electrode (GCE) with zeolitic imidazolate framework-8 (ZIF-8) and acetylene black (AB) in the presence of chitosan (CS). The electrochemical activity and experimental parameters of the ZIF-8-AB-CS/GCE sensor were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimal conditions, the sensor presented a reasonable linear response in the range of 0.1–10 μM with a limit of detection (LOD) as low as 0.004 μM (S/N = 3). The sensor possessed good reproducibility and high stability, and was successfully applied to detect rutin tablet samples with satisfactory results, which was attributed to the synergistic effect between ZIF-8 and AB. Meanwhile, the sensor displayed a potential application for detection of other analytes in real samples. Furthermore, a probable interaction mechanism was proposed to account for the interaction between rutin and the nanocomposite electrode, which was not discussed in previous reports.

A sensitive ZIF-8-AB-CS/GCE for rutin detection is constructed and the interaction between them is discussed for the first time.

“Design of novel WO3/CB nanohybrids” An affordable and efficient electrochemical sensor for the detection of multifunctional flavonoid rutin

A CB/WO₃ nanohybrid-modified SPCE was applied for the electrochemical determination of rutin.

Enhanced photo-electrochemical response of reduced graphene oxide and C3N4 nanosheets for rutin detection

Herein, a sensitive photo-electrochemical sensor based on C₃N₄ and reduced graphene oxide nanosheets modified glassy carbon electrode (C₃N₄-RGO/GCE) has been fabricated for the detection of rutin under UV light illumination. In C₃N₄-RGO catalyst, RGO not only works as a template but also promotes electron transfer, meanwhile, C₃N₄ acts as a photocatalyst. Benefiting from the superior electron transfer capacity and efficient UV light effect of the C₃N₄-RGO catalyst, we get a photo-electrochemical sensor for the rutin detecting with a low detection limit of 1.78×10^-9molL^-1 and an excellent linear range of 5×10^-9-1.4×10^-4molL^-1. Meanwhile, the achieved C₃N₄-RGO/GCE demonstrated nice selectivity, good reproducibility as well as reliable stability. Moreover, compared with the electrochemical determination, the C₃N₄-RGO electrode provides a new way for rutin detection by photo-electrochemical method with a promising UV light responsive result.