Heterojunction photocatalysts for degradation of the tetracycline antibiotic: a review

Amorphous Titanium Dioxide-Based Heterojunction with Locally Enhanced Electron Transport Multipathways for High-Efficient Photodegradation of Tetracycline

A novel amorphous titanium dioxide (AT)-based heterojunction, composed of AT, silver bromide, and silver nanoparticles (Ag NPs), was synthesized and designated as AgBr/Ag/AT-4%. The band structure and active species of AgBr/Ag/AT-4% composites were investigated, and the existence of multiple electron transport pathways in the composites was determined. The Channel I is an all-solid-state Z-scheme heterostructure formed between AT and AgBr by Ag acting as an electron transport bridge, and Channel II is excited by the localized surface plasmon resonance effect induced by the Ag NPs on the photocatalyst surface. The Channel III is an electronically bridged medium with Ti3+/Ti4+ redox coupling pairs and oxygen vacancy-mediated trap states constructed from defective structures. The activity of the sample was assessed by the photocatalytic degradation of tetracycline. It is hoped that this work will provide a new idea for the preparation of an amorphous titanium dioxide-based heterojunction with locally enhanced electron transport multiple pathways.

Visible-light enhanced tetracycline degradation via SnO2/TiO2-Ni@rGO ternary heterostructures

This study explores the synthesis, characterization, and photocatalytic performance of a SnO2/TiO2-Ni@rGO nanocomposite for tetracycline (TC) degradation under visible light irradiation. The nanocomposite was precisely designed to enhance structural stability, charge transfer efficiency, and catalytic activity. X-ray diffraction (XRD) analysis confirmed the structural integrity of the SnO2/TiO2-Ni@rGO composite, demonstrating excellent reusability and resistance to photo-corrosion after multiple cycles. Photocatalytic experiments revealed that the SnO2/TiO2-Ni@rGO nanocomposite significantly outperformed individual SnO2/TiO2-Ni and rGO catalysts, achieving a remarkable 94.6% degradation of TC within 60 min. The degradation process followed pseudo-first-order kinetics, with a rate constant (k) of 0.046 min-1. The Z-scheme charge transfer mechanism facilitated efficient separation and migration of photogenerated charge carriers, generating reactive oxygen species such as superoxide (•O2 -) and hydroxyl (•OH) radicals crucial for the oxidation of TC. Radical scavenger studies confirmed that superoxide and hydroxyl radicals were the primary active species. The SnO2/TiO2-Ni@rGO composite also exhibited excellent reusability, maintaining high catalytic performance over four consecutive cycles. These findings suggest that the SnO2/TiO2-Ni@rGO nanocomposite is a promising candidate for the efficient and sustainable photocatalytic degradation of persistent organic pollutants like TC, offering significant potential for environmental remediation applications.

Donor polarization engineering of conjugated microporous polymers to boost exciton dissociation for photocatalytic degradation of tetracycline

The misuse and inevitable release of antibiotics can cause significant harm to both human health and the environment, and the use of polymeric semiconductors for photodegradation of antibiotics in aqueous environments is one of the most effective strategies to alleviate the current dilemma. Nevertheless, the inherently high exciton binding energy (Eb) and low photogenerated carrier transfer efficiency for most photocatalysts results in unsatisfactory photodegradation performance. Hence, this work proposes a donor polarization strategy to regulate the exciton dissociation of conjugated microporous polymers (CMPs) by minimizing their Eb. Results exhibited that the introduction of the strong donor unit 3,4-ethylenedioxythiophene (EDOT) not only reduces the Eb and effectively promotes exciton dissociation, but also broadens the visible light absorption of CMP. Among them, EdtTz-CMP with the lowest Eb (99 meV) delivered an efficiency of 94.6% in photocatalytic degradation of tetracycline (TC) with in 90 min, significantly higher than those of its analogues. This work provides a viable approach to design CMPs by tuning the intrinsic dipole of the donor for efficient environmental purification.

Mechanistic insights of PO43- functionalized carbon nitride homojunction hydrogels in photocatalytic-self-Fenton-peroxymonosulfate system for tetracycline degradation

In this study, metal-free PO43- enriched g-C3N4/g-C3N4 (PGCN) homojunction alginate 3D beads were developed for in-situ H2O2 production under visible light. Later, the photocatalytic-self-Fenton system was integrated with peroxymonosulfate for tetracycline degradation. Initially, the PO43- enriched g-C3N4 (PCN) and a homojunction composed of PCN and g-C3N4 (GCN) were prepared via the wet-impregnation method. Later, PGCN homojunction was formulated into 3D alginate beads through the blend-crosslinking method. The comprehensive characterization of the homojunction beads affirmed the closer contact between the semiconductors, alteration of the bandgap, faster channelization of electron-hole pairs, and improved separation of charge carriers that attributed to higher catalytic efficacy. The PGCN beads exhibited a maximum H2O2 production of 535 ± 12 µM under visible light irradiation for 60 min. The homojunction hydrogels displayed 99 ± 0.25 % tetracycline degradation in 20 min in the photocatalytic-self-Fenton-PMS system. The experimental studies also claimed a maximum chemical oxygen demand removal of 81 ± 3.6 % in 20 min with maximum reusability of beads up to 20 cycles. The Z-scheme electron migration mechanism is proposed based on the results aided by scavenger and electron spin resonance analysis. Overall, the as-synthesized alginate-supported homojunction-based photocatalytic-self-Fenton-peroxymonosulfate system is highly versatile and reusable for energy and environmental remediation.

Peroxymonosulfate-assisted photocatalysis system enhanced magnetic Fe3O4@P-C3N4 treatment of tetracycline wastewater: Multi-pathways mediated electrons migration to generate reactive species

Photocatalytic wastewater purification is essential for environmental remediation, but rapid carrier recombination and limited oxidative capacity hinder progress. This study proposes an innovative strategy by integrating homogeneous and heterogeneous electron acceptors into a g-C3N4-based photocatalytic system, significantly enhancing the multipath utilization of photogenerated electrons. A novel Fe3O4@P-C3N4 was developed to activate an advanced peroxymonosulfate-assisted photocatalysis (PAP) system, achieving complete degradation and significant mineralization of tetracycline (TC) in real water environments, outperforming others reported in the last five years. Phytic acid, as a key precursor, modifies the hollow tubular morphology and introduces phosphorus (P) heteroatoms as electronic trapping centers, enhancing the visible light response and carrier separation, thereby promoting the Fe2+/Fe3+ cycle and the formation of reactive species. Density functional theory (DFT) calculations pinpointed TC's vulnerable sites and synergically identified reactive species, revealing almost non-toxic degradation processes. Moreover, the recyclable magnetic Fe3O4@P-C3N4/PAP system demonstrates practical application potential and leaching stability in cyclic and continuous testing. This study offers unique insights into the strategic design of photocatalysts and catalytic environments, potentially advancing practical wastewater remediation.

Visible-Light Photocatalytic Degradation Efficiency of Tetracycline and Rhodamine B Using a Double Z-Scheme Heterojunction Catalyst of UiO-66-NH2/BiOCl/Bi2S3

BiOCl is a promising photocatalyst, but due to its weak visible light absorption capacity and low photogenerated electron-hole pair separation rate, its practical application is limited to a certain extent. In this study, a novel double Z-scheme heterojunction UiO-66-NH2/BiOCl/Bi2S3 catalyst was constructed to broaden the visible light response range and promote high photogenerated hole-electron separation of BiOCl. Its photocatalytic performance is evaluated by dissociating tetracycline (TC) and rhodamine B (RhB) in visible light. The optimal proportion of UiO-66-NH2/BiOCl/Bi2S3 hybrids exhibits the best degradation efficiency of visible light illumination (∼93% in 120 min for TC and ∼98% in 60 min for RhB). The synergistic effect of a large visible light response range and the Z-scheme charge transfer mechanism ensure the excellent visible photocatalytic activity of UiO-66-NH2/BiOCl/Bi2S3. It is proven that h+ and •O2- are the main active substances in the photocatalysis process by active substance capture experiments and electron spin resonance tests. The intermediates and degradation processes are analyzed by high-performance liquid chromatography-mass spectrometry. This study proves that the new UiO-66-NH2/BiOCl/Bi2S3 photocatalyst has great application potential in the field of water pollution degradation and will provide a new idea for the optimization of BiOCl.

Low concentration of peroxymonosulfate coupled with visible light triggers oxygen reactive species generation over constructed Bi25FeO40/BiOCl Z-scheme heterojunction for various tetracycline antibiotics removal

Photocatalytic peroxymonosulfate (PMS) oxidation systems demonstrate significant potential and promising prospects through the interconnection of photocatalytic and PMS oxidation for simultaneously achieving efficient pollutant removal and reduction of PMS dosage, which prevents resource wastage and secondary pollution. In this study, a Z-scheme Bi25FeO40/BiOCl (BOFC) heterojunction was constructed to carry out the photocatalytic PMS oxidation process for tetracyclines (TCs) pollutants at low PMS concentrations (0.08 mM). The photocatalytic PMS oxidation rate of Bi25FeO40/BiOCl composites for tetracycline hydrochloride (TCH), chlortetracycline (CTC), oxytetracycline (OTC) and doxycycline (DXC) reaches 86.6%, 83.6%, 86.7%, and 88.0% within 120 min. Simultaneously, the BOFC/PMS system under visible light (Vis) equally displayed the practical application prospects for the solo and mixed simulated TCs antibiotics wastewater. Based on the electron spin resonance (ESR) and X-ray photoelectron spectroscopy (XPS) valence band spectrum, a Z-scheme electron migration pathway was proposed to elucidate the mechanism underlying the performance enhancement of BOFC composites. Bi25FeO40 in BOFC composites can serve as active site for activating PMS by the formation of Fe3+/Fe2+ cycle. Toxicity estimation software tool (T.E.S.T.) and mung beans planting experiment demonstrates that BOFC/PMS/Vis system can reduce toxicity of TCs wastewater. Therefore, BOFC/PMS/Vis system achieves efficient examination in different water environments and efficient utilization of PMS, which displays a scientific reference for achieving environmentally-friendly and resource-saving handling processes.

Z-scheme heterojunction photocatalyst formed by MOF-derived C-TiO2 and Bi2WO6 for enhancing degradation of oxytetracycline: Mechanistic insights and toxicity evaluation in the presence of a single active species

In the work, Bi2WO6/C-TiO2 photocatalyst was successfully synthesized for the first time by loading narrow bandgap semiconductor Bi2WO6 on MOF-derived carboxyl modified TiO2. The phase structure, morphology, photoelectric properties, surface chemical states and photocatalytic performance of the prepared photocatalysts were systematically investigated using various characterization tools. The degradation efficiency of oxytetracycline by 6BT Z-scheme heterojunction photocatalyst under visible light could reach 93.6 % within 100 min, which was related to the high light harvesting and effective separation and transfer of photo-generated carriers. Furthermore, the effects of various environmental factors in actual wastewater were further investigated, and the results showed that 6BT exhibited good adaptability, durability and resistance to interference. Unlike most works, the degradation system with a different single active species were designed and constructed based on their formation mechanism. In addition, for the first time, a positive study was conducted on the priority attack sites, intermediate products, and degradation pathways for the photocatalytic degradation of oxytetracycline by a single active species through HPLC-MS and Fukui index calculations. The toxicity changes of intermediate products produced in three different single active species oxidation systems were evaluated using toxicity assessment software tools (T.E.S.T.), Escherichia coli growth experiments, and wheat growth experiments. Among them, the intermediate products formed through O2- oxidation had the lowest toxicity and the main active sites it attacked were the 20C, 38O, 18C, 41O, and 55O atoms with high f+ values in the oxytetracycline molecular structure. This work provided the insight into the role of each active species in the degradation of antibiotics and offered new ideas for the design and synthesis of efficient and eco-friendly photocatalysts.

Synthesis of a 3D Flower-Like BiOCl/Bi-MOF Heterostructure for High-Performance Removal of Rhodamine B and Tetracycline Hydrochloride

Semiconductor materials based on bismuth metal have been extensively explored for their potential in photocatalytic applications owing to their distinctive crystal structure. Herein, we present the development of a hybrid photocatalyst, CAU-17/BiOCl, featuring a flower-like nanosheet morphology tailored for the photocatalytic degradation of organic contaminants such as rhodamine B (RhB) and tetracycline hydrochloride (TCH). The composite material is obtained by growing thin CAU-17 layers directly onto the host flower-like BiOCl nanosheets under solvothermal conditions. The optimized CAU-17/BiOCl composite possesses excellent photocatalytic performance, achieving a notable 96.0% removal rate for RhB and 78.4% for TCH after 60 and 90 min of LED light irradiation, respectively. This boosted activity is attributed to the heightened absorption of visible light caused by BiOCl and the provision of additional reaction sites due to the thin CAU-17 layers. Furthermore, the establishment of an S-scheme heterojunction mechanism enables efficient charge separation between CAU-17 and BiOCl, facilitating the separation of photoinduced electrons (e-) and holes (h+). Analysis of the degradation mechanism of RhB and TCH reveals the predominant role of superoxide radicals (•O2-), e-, and h+ in the photocatalytic degradation process. Moreover, the removal efficiency of TCH can reach approximately 64.5% after four cycles of recycling of CAU-17/BiOCl. Our work provides a facile, effective solution and a theoretically explained approach for the effective degradation of pollutants using heterojunction photocatalysts.

Highly efficient visible-LED-driven photocatalytic degradation of tetracycline and rhodamine B over Bi2WO6/BiVO4 heterostructures decorated with silver and graphene synthesized by a novel green method

Visible-light-driven Bi2WO6/BiVO4 (BWO/BVO) heterostructures were obtained by joining BWO and BVO n-type semiconductors. A novel and green metathesis-assisted molten salt route was applied to synthesize BWO/BVO. This route is straightforward, high-yield, intermediate temperature, and was successful for obtaining BWO/BVO heterostructures with several ratios (1:1, 1:2, 2:1 w/w). Besides, the 1BWO/1BVO was decorated with Ag nanoparticles (Ag-NPs, 6 wt.%) and graphene (G, 3 wt.%), applying simple and environmentally responsible procedures. The heterostructures were characterized by XRD, Raman, UV-Vis DRS, TEM/HRTEM, PL, and Zeta potential techniques. Ag-NPs and G effectively boosted the photocatalytic activity of 1BWO/1BVO for degrading tetracycline (TC) and rhodamine B (RhB) pollutants. A lab-made 19-W blue LED photoreactor was designed, constructed, and operated to induce the photoactivity of BWO/BVO heterostructures. The low-rated power consumption of the photoreactor (0.01-0.04 kWh) vs. the percent degradation of TC or RhB (%XTC = 73, %XRhB = 100%) is one of the outstanding features of this study. Besides, scavenger tests determined that holes and superoxides are the main oxidative species that produced TC and RhB oxidation. Ag/1BWO/1BVO exhibited high stability in reuse photocatalytic cycles.

A novel BiOBr/rGO photocatalysts for degradation of organic and antibiotic pollutants under visible light irradiation: Tetracycline degradation pathways, kinetics, and mechanism insight

In this study, the BiOBr/rGO nanocomposite photocatalysts are fabricated by a facile solvothermal method. The BiOBr growth on reduced graphene oxide (rGO) sheet could improve BiOBr's photocatalytic activity by increasing its adsorption ability, surface area, and charge carriers' separation efficiency. The prepared nanocomposites were characterized by XRD, Raman, FESEM, EDS, XPS, and UV-visible DRS. The BiOBr/rGO (BRG) nanocomposites showed improved photocatalytic activity for the photodegradation of Rhodamine B (RhB) dye and Tetracycline (TC) under visible light irradiation. Rhodamine B and tetracycline degradation efficiency were about 96% and 73% within 120 min under visible light irradiation. The PL analysis indicates that BiOBr/rGO nanocomposite exhibited maximum separation efficiency of photoinduced charge carriers. The trapping test confirmed that O2- and h+ are significant active photodegradation species. The GC-MS spectra detected the two plausible transformation routes of tetracycline degradation. The current work presented a low-cost and facile approach for fabricating Bi-based composites.

Mo-BiVO4 Photocatalytically Modified Ceramic Ultrafiltration Membranes for Enhanced Water Treatment Efficiency

This study highlights the effectiveness of photocatalytically modified ceramic ultrafiltration (UF) membranes in alleviating two major drawbacks of membrane filtration technologies. These are the generation of a highly concentrated retentate effluent as a waste stream and the gradual degradation of the water flux through the membrane due to the accumulation of organic pollutants on its surface. The development of two types of novel tubular membranes, featuring photocatalytic Mo-BiVO4 inverse opal coatings, demonstrated a negligible impact on water permeance, ensuring consistent filtration and photocatalytic efficiency and suggesting the potential for maintaining membrane integrity and avoiding the formation of highly concentrated retentate effluents. Morphological analysis revealed well-defined coatings with ordered domains and interconnected macropores, confirming successful synthesis of Mo-BiVO4. Raman spectroscopy and optical studies further elucidated the composition and light absorption properties of the coatings, particularly within the visible region, which is vital for photocatalysis driven by vis-light. Evaluation of the tetracycline removal efficiency presented efficient adsorption onto membrane surfaces with enhanced photocatalytic activity observed under both UV and vis-light. Additionally, vis-light irradiation facilitated significant degradation, showcasing the versatility of the membranes. Total Organic Carbon (TOC) analysis corroborated complete solute elimination or photocatalytic degradation without the production of intermediates, highlighting the potential for complete pollutant removal. Overall, these findings emphasize the promising applications of Mo-BiVO4 photocatalytic membranes in sustainable water treatment and wastewater remediation processes, laying the groundwork for further optimization and scalability in practical water treatment systems.

Advanced photocatalytic materials based degradation of micropollutants and their use in hydrogen production - a review

The use of pharmaceuticals, dyes, and pesticides in modern healthcare and agriculture, along with expanding industrialization, heavily contaminates aquatic environments. This leads to severe carcinogenic implications and critical health issues in living organisms. The photocatalytic methods provide an eco-friendly solution to mitigate the energy crisis and environmental pollution. Sunlight-driven photocatalytic wastewater treatment contributes to hydrogen production and valuable product generation. The removal of contaminants from wastewater through photocatalysis is a highly efficient method for enhancing the ecosystem and plays a crucial role in the dual-functional photocatalysis process. In this review, a wide range of catalysts are discussed, including heterojunction photocatalysts and various hybrid semiconductor photocatalysts like metal oxides, semiconductor adsorbents, and dual semiconductor photocatalysts, which are crucial in this dual function of degradation and green fuel production. The effects of micropollutants in the ecosystem, degradation efficacy of multi-component photocatalysts such as single-component, two-component, three-component, and four-component photocatalysts were discussed. Dual-functional photocatalysis stands out as an energy-efficient and cost-effective method. We have explored the challenges and difficulties associated with dual-functional photocatalysts. Multicomponent photocatalysts demonstrate superior efficiency in degrading pollutants and producing hydrogen compared to their single-component counterparts. Dual-functional photocatalysts, incorporating TiO2, g-C3N4, CeO2, metal organic frameworks (MOFs), layered double hydroxides (LDHs), and carbon quantum dots (CQDs)-based composites, exhibit remarkable performance. The future of synergistic photocatalysis envisions large-scale production facilitate integrating advanced 2D and 3D semiconductor photocatalysts, presenting a promising avenue for sustainable and efficient pollutant degradation and hydrogen production from environmental remediation technologies.

Wood-converted porous carbon decorated with MIL-101(Fe) derivatives for promoting photo-Fenton degradation of ciprofloxacin

In response to the escalating concerns over antibiotics in aquatic environments, the photo-Fenton reaction has been spotlighted as a promising approach to address this issue. Herein, a novel heterogeneous photo-Fenton catalyst (Fe3O4/WPC) with magnetic recyclability was synthesized through a facile two-step process that included in situ growth and subsequent carbonization treatment. This catalyst was utilized to expedite the photocatalytic decomposition of ciprofloxacin (CIP) assisted by H2O2. Characterization results indicated the successful anchoring of MIL-101(Fe)-derived spindle-like Fe3O4 particles in the multi-channeled wood-converted porous carbon (WPC) scaffold. The as-synthesized hybrid photocatalysts, boasting a substantial specific surface area of 414.90 m2·g-1 and an excellent photocurrent density of 0.79 μA·cm-2, demonstrated superior photo-Fenton activity, accomplishing approximately 100% degradation of CIP within 120 min of ultraviolet-light exposure. This can be attributed to the existence of a heterojunction between Fe3O4 and WPC substrate that promotes the migration and enhances the efficient separation of photogenerated electron-hole pairs. Meanwhile, the Fe(III)/Fe(II) redox circulation and mesoporous wood carbon in the catalyst synergistically enhance the utilization of H2O and accelerate the formation of •OH radicals, leading to heightened degradation efficiency of CIP. Experiments utilizing chemical trapping techniques have demonstrated that •OH radicals are instrumental in the CIP degradation process. Furthermore, the study on reusability indicated that the efficiency in removing CIP remained at 89.5% even through five successive cycles, indicating the structural stability and excellent recyclability of Fe3O4/WPC. This research presented a novel pathway for designing magnetically reusable MOFs/wood-derived composites as photo-Fenton catalysts for actual wastewater treatment.

Enhanced tetracycline degradation with TiO2/natural pyrite S-scheme photocatalyst

In this study, TiO2 nanoparticles were employed as a photocatalyst for the degradation of tetracycline (TC) under visible light irradiation. The TiO2 nanoparticles were decorated on natural pyrite (TiO2/NP) and characterized using XRD, FTIR, and SEM-EDX methods. This study evaluated the impacts of various operational parameters such as pH, catalyst dosage, initial TC concentration, and light intensity on TC removal. The findings revealed that under optimal conditions (pH 7, catalyst: 2 g/L, TC: 30 mg/L, and light intensity: 60 mW/cm2), 100% of TC and 84% of TOC were removed within 180 min. The kinetics of TC elimination followed a first-order model. The dominant oxidation species involved in the photocatalytic elimination of TC was found to be ·OH radicals in the TiO2/NP system. The reuse experiments showed the high capability of the catalyst after four consecutive cycles. This study confirmed that the TiO2/NP system has high performance in photocatalytic TC removal under optimized experimental conditions.

Bismuth-Based Z-Scheme Heterojunction Photocatalysts for Remediation of Contaminated Water

Agricultural runoff, fuel spillages, urbanization, hospitalization, and industrialization are some of the serious problems currently facing the world. In particular, byproducts that are hazardous to the ecosystem have the potential to mix with water used for drinking. Over the last three decades, various techniques, including biodegradation, advanced oxidation processes (AOPs), (e.g., photocatalysis, photo-Fenton oxidation, Fenton-like oxidation, and electrochemical oxidation process adsorption), filtration, and adsorption techniques, have been developed to remove hazardous byproducts. Among those, AOPs, photocatalysis has received special attention from the scientific community because of its unusual properties at the nanoscale and its layered structure. Recently, bismuth based semiconductor (BBSc) photocatalysts have played an important role in solving global energy demand and environmental pollution problems. In particular, bismuth-based Z-scheme heterojunction (BBZSH) is considered the best alternative route to overhaul the limitations of single-component BBSc photocatalysts. This work aims to review recent studies on a new type of BBZSH photocatalysts for the treatment of contaminated water. The general overview of the synthesis methods, efficiency-enhancing strategies, classifications of BBSc and Z-scheme heterojunctions, the degradation mechanisms of Z- and S-schemes, and the application of BBZSH photocatalysts for the degradation of organic dyes, antibiotics, aromatics compounds, endocrine-disrupting compounds, and volatile organic compounds are reviewed. Finally, challenges and the future perspective of BBZSH photocatalysts are discussed.

Recent strategies, progress, and prospects of two-dimensional metal carbides (MXenes) materials in wastewater purification: A review

With the rapid development of industrialization, water pollution directly leads to the serious shortage of fresh water. As reported by the World Water Council, nearly 3.8 billion people will face water scarcity by 2030. Therefore, developing advanced nanomaterials to realize wastewater purification is a major challenge. Two-dimensional (2D) transition metal carbides (MXenes), as the emerging 2D layered nanomaterials, have been investigated for the applications of water purification treatment since first reported in 2011. Over 40 different MXenes have been developed for environmental remediation, and dozens more structures and properties are theoretically predicted. Here, we review the advances from the aspects of synthesis strategies for MXenes, purification mechanism, and their applications in wastewater treatment processes. The major points are 1) the synthesis and modification approaches for MXenes such as multi-layered stacked MXenes and delaminated MXenes 2) a discussion of current water remediation over MXene-based materials, 3) a brief introduction for removal behaviors and deep interaction mechanisms, 4) optimization strategies and key points for boosting the remediation performance of MXenes.

Visible-light S-scheme heterojunction of copper bismuthate quantum dots decorated Titania-spindles for exceptional tetracycline degradation

The rational heterojunctions for antibiotics degradation have sparked significant attention in wastewater purification. In this study, we report a unique S-scheme photocatalytic system by in-situ growth of CuBi2O4 quantum dots (QDs) onto {101} facet of TiO2 spindles (TiO2-P) via hydrothermal transformation of Na-titanate nanotubes, which is observed by transmission electron microscopy technology. The CuBi2O4/TiO2-P effectively achieves photo-degradation of tetracycline (TC) using visible light (e.g. an 82% TC degradation efficiency at 60 min), which is attributed to the promotion of the charge separation and retaining strong redox capacity at the heterojunction interfaces via the active species of O2-, OH, and h+. Moreover, density functional theory (DFT) calculations show that a built-in electric field forms at the interface of the S-scheme heterojunction. In all, this work introduces a straightforward in-situ hydrothermal growth method to construct S-scheme photocatalysts for effective water treatment.

Fluorescence determination of the total amount of tetracyclines by a flavonol-based supramolecular sensor

Tetracyclines (TCs) are a group of broad-spectrum antibiotics against multiplying microorganisms yet with several adverse effects on humans. Since all types of TCs have the similar chemical skeleton and mechanism of action, quantification of total amount of TCs in the environment was of particular importance. To date, dozens of fluorescent probes have been reported for TCs detection, but only very few of them enabled detection of total TCs. In this study, we report a novel supramolecular sensor constructed by human serum albumin as the recognition moiety and a flavonol fluorophore as the indicator. Under the 370 nm UV excitation, this sensor exhibits the rapid response (5 s), acceptable sensitivity (limit of detection ∼ 0.58 μM), long dynamic detection range (0-20 μM), prominent specificity, and excellent anti-interference properties for analysis of total TCs. The mechanism was carefully validated using 1H NMR, fluorescence titration experiments, molecular docking, and mass spectrometry. We expect this work can inspire more sensor design for TCs quantification.

Highly efficient ZnO/WO3 nanocomposites towards photocatalytic gold recovery from industrial cyanide-based gold plating wastewater

Discharging the gold-contained wastewater is an economic loss. In this work, a set of ZnO/WO3 was facile synthesized by hydrothermal method in order to recover gold from the industrial cyanide-based gold plating wastewater by photocatalytic process. Effect of ZnO contents coupled with WO3 was first explored. Then, effects of operating condition including initial pH of wastewater, type of hole scavenger, concentration of the best hole scavenger and photocatalyst dose were explored. A series of experimental results demonstrated that the ZnO/WO3 nanocomposite with 5 wt% ZnO (Z5.0/WO3) depicted the highest photocatalytic activity for gold recovery due to the synergetic effect of oxygen vacancies, a well-constructed ZnO/WO3 heterostructure and an appropriate band position alignment with respect to the redox potentials of [Au(CN)2]- and hole scavengers. Via this ZnO/WO3 nanocomposite, approximately 99.5% of gold ions was recovered within 5 h using light intensity of 3.57 mW/cm2, catalyst dose of 2.0 g/L, ethanol concentration of 20 vol% and initial pH of wastewater of 11.2. In addition, high stability and reusability were observed with the best nanocomposite even at the 5th reuse. This work provides the guidance and pave the way for designing the ZnO/WO3 nanocomposite for precious metal recovery from a real industrial wastewater.

Emergence of CuInS2 derived photocatalyst for environmental remediation and energy conversion

Hydrogen production, catalytic organic synthesis, carbon dioxide reduction, environmental purification, and other major fields have all adopted photocatalytic technologies due to their eco-friendliness, ease of use, and reliance on sunlight as the driving force. Photocatalyst is the key component of photocatalytic technology. Thus, it is of utmost importance to produce highly efficient, stable, visible-light-responsive photocatalysts. CIS stands out among other visible-light-response photocatalysts for its advantageous combination of easy synthesis, non-toxicity, high stability, and suitable band structure. In this study, we took a brief glance at the synthesis techniques for CIS after providing a quick introduction to the fundamental semiconductor features, including the crystal and band structures of CIS. Then, we discussed the ways doping, heterojunction creation, p-n heterojunction, type-II heterojunction, and Z-scheme may be used to modify CIS's performance. Subsequently, the applications of CIS towards pollutant degradation, CO2 reduction, water splitting, and other toxic pollutants remediation are reviewed in detail. Finally, several remaining problems with CIS-based photocatalysts are highlighted, along with future potential for constructing more superior photocatalysts.

B4C/Ce co-modified Ti/PbO2 dimensionally stable anode: Facile one-step electrodeposition preparation and highly efficient electrocatalytic degradation of tetracycline

The application of PbO2 for electrochemical oxidation technology is limited by its low electrocatalytic activity and short service life. Herein, based on the facile one-step electrodeposition, we prepared a boron carbide (B4C) and cerium (Ce) co-modified Ti/PbO2 (Ti/PbO2-B4C-Ce) electrode to overcome these shortcomings. Compared with Ti/PbO2 electrode, the denser surface is displayed by Ti/PbO2-B4C-Ce electrode. Meanwhile, electrochemical characterization indicates that the introduction of B4C and Ce significantly enhance the electrochemical performance of PbO2 electrode. In degradation experiments, under optimized conditions (current density 20 mA cm-2, pH 9, 0.15 M Na2SO4 and 30 °C), the fully degradation of tetracycline (TC) can be completed within 30 min. Furthermore, the trapping experiment demonstrates that ∙OH and SO4·- radicals have a synergistic effect in the degradation process of TC. Based on results of liquid chromatography-mass spectrometer, the generated ·OH preferentially attacks amides, phenols and conjugated double bond groups in TC. Importantly, Ti/PbO2-B4C-Ce electrode maintains a constant degradation efficiency even after 10 recycling tests, and its service life is 2.4 times of traditional Ti/PbO2 electrode. Hence, Ti/PbO2-B4C-Ce electrode is a promising electrode for degradation of organic wastewater containing amides, phenols, and conjugated double bond groups.

Review of Bi-based catalysts in piezocatalytic, photocatalytic and piezo-photocatalytic degradation of organic pollutants

Photocatalysis, as an effective advanced oxidation process, has been widely carried out in water waste treatment, especially in the degradation of organic pollutants. However, the photocatalytic process is limited by the high recombination rate of photo-generated carriers. To improve photocatalytic efficiency, piezocatalysis has attracted increasing attention, especially that using lead-free piezoelectric materials, which avoids the secondary pollution of lead toxicity in the environment. Bi-based materials have both photocatalytic activity and piezocatalytic activity, which can perfectly combine the advantages of these two catalytic processes to promote the degradation of organic pollutants. Under an external mechanical action, the Bi-based catalyst produces a polarized electric field due to the piezoelectric effect, and the photo-generated carriers can be effectively separated under electrostatic attraction, thus obtaining more efficient photocatalytic performance. However, there are still many gaps in the design, reaction mechanism, and development prospects of Bi-based piezo-photocatalysts. Therefore, to acquire a deeper understanding of the research status of Bi-based piezo-photocatalysts, we summarize the existing literature to provide effective ways to improve piezo-photocatalytic performance. Moreover, this paper points out the developmental direction of piezo-photocatalysis in the future. Last but not least, we also look forward to the prospect of piezo-photocatalysis in the degradation of organic pollutants.

Recent advances of modification effect in Co3O4-based catalyst towards highly efficient photocatalysis

Tricobalt tetroxide (Co3O4) has been developed as a promising photocatalyst material for various applications. Several reports have been published on the self-modification of Co3O4 to achieve optimal photocatalytic performance. The pristine Co3O4 alone is inadequate for photocatalysis due to the rapid recombination process of photogenerated (PG) charge carriers. The modification of Co3O4 can be extended through the introduction of doping elements, incorporation of supporting materials, surface functionalization, metal loading, and combination with other photocatalysts. The addition of doping elements and support materials may enhance the photocatalysis process, although these modifications have a slight effect on decreasing the recombination process of PG charge carriers. On the other hand, combining Co3O4 with other semiconductors results in a different PG charge carrier mechanism, leading to a decrease in the recombination process and an increase in photocatalytic activity. Therefore, this work discusses recent modifications of Co3O4 and their effects on its photocatalytic performance. Additionally, the modification effects, such as enhanced surface area, generation of oxygen vacancies, tuning the band gap, and formation of heterojunctions, are reviewed to demonstrate the feasibility of separating PG charge carriers. Finally, the formation and mechanism of these modification effects are also reviewed based on theoretical and experimental approaches to validate their formation and the transfer process of charge carriers.

Enhancing the photodegradation of tetracycline in aquaculture wastewater via iron(III)-alginate: Degradation pathway transformation and toxicity reduction

Tetracycline's (TC) incomplete self-photolysis by light irradiation generally produces toxic intermediate products, which posing serious harm to the aqueous environment. In order to diminish the environmental risks of TC self-photolysis, an iron(III)-alginate (Fe-SA) hydrogel assisted photocatalytic method was developed and the underlying mechanisms was also analyzed in this work. Under simulated sunlight, the photo-degradation efficiency of TC was 61.1% at pH 7.0 within 2 h. Importantly, four of the seven intermediate products that identified during the self-photolysis of TC were found toxic based on QSAR analysis. In contrast, the removal efficiency of TC could be improved to 87.4% by adding Fe-SA under the same conditions. Moreover, only two relatively weakly toxic intermediate products were detected after exposing to the Fe-SA photocatalytic system, indicating a significant reduction of the potential ecological risks caused by TC self-photolysis. Furthermore, the determination of reactive oxidation species (ROS) demonstrated that the addition of Fe-SA primarily facilitated the degradation of TC and the related toxic intermediate products through assisting the free radical (∙OH and ∙O2-) photocatalytic degradation pathway. Additionally, the photocatalytic application under actual sunlight conditions and the reusability experiments of Fe-SA further confirmed its effectiveness and low cost in removing TC. This study revealed the photodegradation mechanisms of TC from the perspective of the self-photolysis process, and also offering new insights into the removal of TC pollution in the environment.

Critical review on modified floating photocatalysts for emerging contaminants removal from landscape water: problems, methods and mechanism

Due to the disorderly discharge in modern production and daily life of people, emerging contaminants(ECs) began to appear in landscape water, and have become a key public concern. Because of the unique characteristics of landscape water, it is difficult to efficiently remove ECs either by natural purification or by traditional large-scale sewage treatment facilities. The ideal purification method is to remove them while maintaining a beautiful environment. Possessing the feature of low-density, floating photocatalysts could harvest sufficient light on the surface of the water for photocatalytic degradation, which may be an important supplement for ECs treatment in landscape water. This paper gave a review related to floating photocatalysts and proposed an idea of combining floating photocatalysts to construct bionic photocatalytic materials for contaminative landscape water treatment. Six types of common floating substrates and corresponding applications for floating photocatalysts were concluded in this paper, and the main problem leading to the low efficiency of photocatalysts and three corresponding three improvement strategies were discussed. Besides, the modification mechanisms of photocatalysts were discussed thoroughly. On this basis, the engineering application prospects of bionic photocatalytic materials were proposed to remove ECs in landscape water.

Visible Light Photocatalytic Degradation of Methylene Blue Dye and Pharmaceutical Wastes over Ternary NiO/Ag/TiO2 Heterojunction

Ternary NiO/Ag/TiO2 heterojunction photocatalyst was prepared by deposition coprecipitation for visible light photocatalytic applications. Physicochemical properties of the synthesized NiO/Ag/TiO2 composite were characterized by X-ray diffraction, Brunauer-Emmett-Teller surface area measurement method, transmission electron microscopy, energy-dispersive X-ray spectroscopy techniques, X-ray photoelectron spectroscopy technique, and ultraviolet-visible absorption spectroscopy. The results suggest that the well-dispersed small metallic silver nanoparticles (<3 nm) facilitate electron transfer and bridge nickel oxide and titanium oxide. The photocatalytic degradation and the methylene blue (MB) dye kinetics were carried out on a ternary NiO/Ag/TiO2 composite and compared to bare TiO2 under visible light irradiation. The results indicate that NiO/Ag/TiO2 has superior MB photodegradation efficiency with a high reaction rate constant and low degradation time (93.15% within 60 min) compared to Ag/TiO2, NiO/TiO2, and bare TiO2. NiO/Ag/TiO2 nanocomposite was also investigated for the most common pharmaceutical waste degradation and exhibited excellent degradation efficiency. The enhancement of the composite's performance could be attributed to the surface plasmonic resonance of the Ag nanoparticles, the formation of Schottky junctions at the Ag-TiO2 and Ag-NiO interface, and the p-n heterojunction between NiO and TiO2. Ag NPs act as a photosynthesizer and a photocatalyst, facilitate electron transfer, shift the absorption to the visible light region, reduce the band gap of TiO2, suppress the electron-hole recombination, and enhance the photocatalytic activity and stability as a result.

Enhancing the Photocatalytic Performance of Antibiotics Using a Z-Scheme Heterojunction of 0D ZnIn2S4 Quantum Dots and 3D Hierarchical Inverse Opal TiO2

Limited light absorption and rapid photo-generated carriers' recombination pose significant challenges to the practical applications of photocatalysts. In this study, we employed an efficient approach by combining the slow-photon effect with Z-scheme charge transfer to enhance the photo-degradation performance of antibiotics. Specifically, we incorporated 0D ZnIn2S4 quantum dots (QDs) into a 3D hierarchical inverse opal (IO) TiO2 structure through a facile one-step process. This combination enhanced the visible light absorption and provided abundant active surfaces for efficient photo-degradation. Moreover, the ZnIn2S4 QDs formed an artificial Z-scheme system with IO-TiO2, facilitating the separation and migration of charge carriers. To achieve a better band alignment with IO-TiO2, we doped Ag into the ZnIn2S4 QDs (Ag: ZIS QDs) to adjust their energy levels. Through an investigation of the different Ag contents in the ZnIn2S4 QDs, we found that the optimal photo-degradation performance was achieved with Ag (2.0): ZIS QDs/IO-TiO2, exhibiting degradation rates 19.5 and 14.8 times higher than those of ZnIn2S4 QDs and IO-TiO2, respectively. This study provides significant insights for elevating the photocatalytic capabilities of IO-TiO2 and broadening its prospective applications.

MOF-Derived Spindle-Shaped Z-Scheme ZnO/ZnFe2O4 Heterojunction: A Magnetic Recovery Catalyst for Efficient Photothermal Degradation of Tetracycline Hydrochloride

The development of photocatalysts with a wide spectral response and effective carrier separation capability is essential for the green degradation of tetracycline hydrochloride. In this study, a magnetic recyclable Z-scheme ZnO/ZnFe2O4 heterojunction (ZZF) was successfully constructed via the solid phase method, using MIL-88A(Fe)@Zn as the precursor. An appropriate band gap width and Z-scheme charge transfer mechanism provide ZZF with excellent visible light absorption performance, efficient charge separation, and a strong redox ability. Under visible light irradiation, the degradation efficiency of tetracycline hydrochloride for the optimal sample can reach 86.3% within 75 min in deionized water and 92.9% within 60 min in tap water, exhibiting superior stability and reusability after five cycles. Moreover, the catalyst in the water can be conveniently recovered by magnetic force. After visible light irradiation for 70 min, the temperature of the reaction system increased by 21.9 °C. Its degradation constant (35.53 × 10-3 min-1) increased to 5.1 times that at room temperature (6.95 × 10-3 min-1). Using thermal energy enhances the kinetic driving force of the reactants and facilitates carrier migration, meaning that more charge is available for the production of •O2- and •OH. This study provides a potential candidate for the efficient degradation of tetracycline hydrochloride by combining thermal catalysis with a photocatalytic heterojunction.

Synergistic effect of a Bi2Zr2O7 and hydroxyapatite composite: organic pollutant remediation, antibacterial and electrochemical sensing applications

Global concern regarding the energy crisis and environmental pollution is increasing. The fabrication of efficient catalysts remains a long-term goal. Recently, green synthesis methods for catalyst fabrication have attracted the scientific community. Herein, a simple approach to synthesize bismuth zirconate-hydroxyapatite (BZO-HA) nanocomposites using Mentha spicata (mint) leaves as a reducing agent via a combustion method has been reported. The use of a green reducing agent provided economic attributes to this work. Among the prepared samples, the BZO-HA (20%) composite exhibited superior photocatalytic activity. The photodegradation efficiency of the composite reached 90.3% and 98.4% for methylene blue (MB) and rose Bengal (RB) dyes, respectively. The results showed the excellent optical performance of the prepared composites. The constructed sensor (BZO-HA 20%) for the very first time showed outstanding selectivity and performance towards sensing lead nitrate and dextrose compared to bare bismuth zirconate (BZO) and hydroxyapatite (HA). A three-electrode system using 0.1 M KCl was used for the study. The synthesized composite BZO-HA (20%) can sense lead nitrate and dextrose over the concentration range of 1-5 mM in the potential range from -1.0 V to +1.0 V. The BZO-HA composite was also investigated against Gram-negative (S. typhi) and Gram-positive (S. aureus) bacteria for antibacterial activity studies. Enhanced antibacterial activity was observed compared to bare BZO and HA catalysts. Thus, the prepared BZO-HA nanocomposite exhibited multifunctional applications.

Comprehensive analysis of NiFe2O4/MWCNTs nanocomposite to degrade a healthcare waste - tetracycline

Tetracycline (TC), a commonly used antibiotic for studying bacterial illnesses in living organisms, poses a significant risk to the aquatic environment. Despite various conventional methods having been attempted to remove TC antibiotics from water solutions, they have not proven effective. Consequently, the focus of the research is on the photocatalytic degradation of TC. According to the research, MWCNTs were successfully incorporated into NiFe2O4 nanoparticles, which reduced the pace at which charge carriers recombined after joining with MWCNTs. Subsequently, the catalyst's efficacy was assessed in a batch reactor by analyzing the weight percentage change of the nanocomposite, the initial concentration of TC antibiotics, the effects of pH and contact time. The identical operational parameters were employed to investigate the degradation of TC using NiFe2O4 and MWCNTs as individual pure materials. The findings indicated that the photocatalytic process using NiFe2O4/MWCNTs achieved a degradation efficiency of 95.8% for TC at a pH value of 9. This result was obtained after a reaction time of 120 minutes, the concentration of TC solution was 10 mg L-1, with a nanocomposite dose of 0.6 g L-1 of TN 04 and 120 W m-2. The pseudo-first-order approach was used to estimate the rate at which TC degrades. After four consecutive uses, it was observed that the photocatalysts maintained their original properties, with only a slight decrease of approximately 2.4% in the removal efficiency. The study demonstrated that the NiFe2O4/MWCNTs nanocomposite exhibited considerable efficiency in degrading TC. Due to its simple manufacture and useful recovery, it has the potential to function well as a catalyst for the removal and degradation of pharmaceutical organic contaminants.

TET-Yeasate: An engineered yeast whole-cell lysate-based approach for high performance tetracycline degradation

The widespread of tetracycline (TC) residues in anthropogenic and natural environments pose an immediate threat to public health. Herein, we established the TET-Yeasate, an approach based on whole-cell lysate of engineered yeast, to mitigate the TC contamination in environment. The TET-Yeasate is defined as the biological matrix of whole cell lysate from engineered yeast that containing TC-degradative components (Tet(X), NADPH, Mg2+) and protective macromolecules. The TET-Yeasate was able to efficiently eliminate TC residues in tap water (98.8%), lake water (77.6%), livestock sewage (87.3%) and pharmaceutical wastewater (35.3%) without necessity for exogenous addition of expensive cofactors. The TET-Yeasate was further developed into lyophilized form for ease of storage and delivery. The TET-Yeasate in lyophilized form efficiently removed up to 74.6% TC residue within 0.25 h. In addition, the lyophilization confers promising resilience to TET-Yeasate against adverse temperatures and pH by maintaining degradation efficacy of 85.69%-97.83%. The stability test demonstrated that the biomacromolecules in lysate served as natural protectants that exerted extensive protection on TET-Yeasate during the 14-day storage at various conditions. In addition, 5 potential degradation pathways were elaborated based on the intermediate products. Finally, the analysis indicated that TET-Yeasate enjoyed desirable bio- and eco-safety without introduction of hazardous intermediates and spread of resistance genes. To summary, the TET-Yeasate based on whole cell lysate of engineered yeast provides a cost-effective and safe alternative to efficiently remove TC residues in environment, highlighting the great potential of such whole-cell based methods in environmental decontamination.

Removal of tetracycline in aqueous solution by iron-loaded biochar derived from polymeric ferric sulfate and bagasse

In this study, the tetracycline (TC) removal performance of iron-loaded biochar (BPFSB) derived from sugarcane bagasse and polymerized iron sulfate was investigated, and the mechanism of TC removal was also explored by study of isotherms, kinetics and thermodynamics and characterization of fresh and used BPFSB (XRD, FTIR, SEM and XPS). The results showed that under optimized conditions (initial pH 2; BPFSB dosage 0.8 g·L-1; TC initial concentration 100 mg·L-1; Contact time 24 h; temperature 298 K), the removal efficiency of TC was as high as 99.03%. The isothermal removal of TC followed well the Langmuir, Freundlich, and Temkin models, indicating that multilayer surface chemisorption dominated the TC removal. The maximum removal capacity of TC by BPFSB at different temperatures was 185.5 mg·g-1 (298 K), 192.7 mg·g-1 (308 K), and 230.9 mg·g-1 (318 K), respectively. The pseudo-second-kinetic model described the TC removal better, while its rate-controlling step was a combination of liquid film diffusion, intraparticle diffusion, and chemical reaction. Meanwhile, TC removal was also a spontaneous and endothermic process, during which the randomness and disorder between the solid-liquid interface was increased. According to the characterization of BPFSBs before and after TC removal, H-bonding and complexation were the major interactions for TC surface adsorption. Furthermore, BPFSB was efficiently regenerated by NaOH. In summary, BPFSB had the potential for practical application in TC removal.

Photocatalytic Degradation of Acetaminophen in Aqueous Environments: A Mini Review

Over the past few decades, acetaminophen (ACT), a typical nonsteroidal anti-inflammatory drug (NSAID), has gained global usage, positioning itself as one of the most extensively consumed medications. However, the incomplete metabolism of ACT leads to a substantial discharge into the environment, classifying it as an environmental contaminant with detrimental effects on non-target organisms. Various wastewater treatment technologies have been developed for ACT removal to mitigate its potential environmental risk. Particularly, photocatalytic technology has garnered significant attention as it exhibits high efficiency in oxidizing and degrading a wide range of organic pollutants. This comprehensive review aims to systematically examine and discuss the application of photocatalytic technology for the removal of ACT from aqueous environments. Additionally, the study provides a detailed overview of the limitations associated with the photocatalytic degradation of ACT in practical applications, along with effective strategies to address these challenges.

Efficient activation of persulfate by Ti3C2 MXene QDs modified ZnFe2O4 for the rapid degradation of tetracycline

Mxene-based catalysts with specific interfacial characteristics are beneficial for photocatalytic applications. Herein, Ti₃C₂ MXene modified ZnFe₂O₄ nanocomposite materials were prepared for photocatalysis. The morphology and structure of the nanocmposites were characterized by scanning electron microscopy (SEM), High-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), which revealed that Ti₃C₂ MXene as quantum dots (QDs) was uniformly distributed on the ZnFe₂O₄ surface. The Ti₃C₂ QDs modified ZnFe₂O₄ catalyst (ZnFe₂O₄/MXene-15%) under visible light achieved 87% degradation efficiency of tetracycline within 60 min when coupled with persulfate (PS) system. The initial solution pH, PS dosage and co-existing ions were found to be the main factors affecting the heterogeneous oxidation process, while quenching experiments showed that O₂^•- is the main oxidizing species in the removal of tetracycline in ZnFe₂O₄/MXene-PS system. In addition, the cyclic experiments suggested that ZnFe₂O₄/MXene had good stability and thus it may have practical applications in industry.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

InVO4 nanosheets decorated with ZnWO4 nanorods: A novel composite and its enhanced photocatalytic performance under solar light

InVO₄ is the most attractive inorganic new-generation material for advanced scientific research, especially in the fields of energy and environmental science. In theory, this stable, non-toxic, energy-efficient metal vanadate semiconductor is expected to exhibit significant catalytic activity owing to its narrow bandgap energy. However, this has not been achieved in practice because of its inherent defects in terms of the separation and migration of charge carriers. In fact, the exploration of this material is still in its infancy, and more research is needed to improve its efficiency and speed up its commercialization. Band gap engineering using heterojunction formation offers better results than other methods, such as morphological variations and doping efforts. In this context, the present study offers a significant solution substantiated by experimental results. This includes the successful synthesis of a novel nanocomposite of InVO₄ nanosheets decorated with ZnWO₄ nanorods with a unique improved light absorption ability. Three composites with 26.48-33.85 nm crystal sizes and 11.74-19.98 m²/g surface area were prepared with tailor-made bandgap energies in the range of 2.52-2.97 eV. Furthermore, they produced high photoexcitation currents with low EIS resistance with respect to their constituents. The as-prepared InVO₄-based novel catalyst almost completely (98.33%) decomposed tetracycline (TC) antibiotic in just 90 min, proving its high efficacy. The enhanced performance of the novel catalyst is 7.6 times that of InVO₄ and 10 times that of ZnWO₄. Moreover, the catalyst intake was significantly small (15 mg/100 mL TC solution).

Preparation of TiO2/Fe-MOF n‒n heterojunction photocatalysts for visible-light degradation of tetracycline hydrochloride

Visible-light-assisted photocatalysis has been recognized as an effective solution to the degradation of various pollutants including antibiotics, pesticides, herbicides, microplastics, and organic dyes. Herein, an n-n heterojunction TiO₂/Fe-MOF photocatalyst is reported, designed via hydrothermal synthesis route. TiO₂/Fe-MOF photocatalyst was characterized by XPS, BET, EIS, EDS, DRS, PL, FTIR, XRD, TEM, SEM and HRTEM techniques. Inspired by XRD, FTIR, XPS, EDS, TEM, SEM, and HRTEM analyses, the successful synthesis of n-n heterojunction TiO₂/Fe-MOF photocatalysts was proved. The migration efficiency of the light-induced electron-hole pairs was confirmed by the PL and EIS tests. TiO₂/Fe-MOF exhibited a significant performance for tetracycline hydrochloride (TC) removal under visible light irradiation. TC removal efficiency for TiO₂/Fe-MOF (15%) nanocomposite reached 97% within 240 min, ca. 11 times higher than pure TiO₂. The photocatalytic enhancement of TiO₂/Fe-MOF could be attributed to the broadening the light response range, forming an n-n junction between Fe-MOF and TiO₂ components, suppressing charge recombination. Based on recycling experiments, TiO₂/Fe-MOF had a good potential to be used in consecutive TC degradation tests.

Efficient Photocatalytic Degradation of Tetracycline under Visible Light by an All-Solid-State Z-Scheme Ag3PO4/MIL-101(Cr) Heterostructure with Metallic Ag as a Charge Transmission Bridge

The Z-type Ag/Ag₃PO₄/MIL-101(Cr) heterojunction photocatalyst (referred to as AAM-x) was successfully prepared by a simple in situ precipitation method. The photocatalytic activity of the AAM-x samples was evaluated using a common tetracycline (TC) antibiotic. All AAM-x materials are more effective in removing TC than Ag₃PO₄ and MIL-101(Cr). Among them, AAM-3 exhibited efficient photodegradation efficiency and excellent structural stability, and the removal rate of TC (20 mg L^-1) by AAM-3 (0.5 g L^-1) under 60 min of visible light was 97.9%. The effects of photocatalyst dosage, pH, and inorganic anions were also systematically investigated. According to the X-ray photoelectron spectroscopy analysis, metallic silver particles appeared on the surface of the Ag₃PO₄/MIL-101(Cr) mixture during the catalyst synthesis. The results of photoluminescence spectra, photocurrent response, EIS, and fluorescence lifetime showed that AAM-3 has a high photogenic charge separation efficiency. An all-solid-state Z-type heterojunction mechanism including Ag₃PO₄, metallic Ag, and MIL-101(Cr) is proposed to rationalize the excellent photocatalytic performance and photostability of AAM-x composites and to explain the effect of metallic Ag acting as a charge transfer bridge. The TC intermediates were identified using liquid chromatography-mass spectrometry and possible routes of TC degradation were also discussed. This work provides a viable idea for removing antibiotics by an Ag₃PO₄/MOF-based heterogeneous structured photocatalyst.

A novel BC/g-C3N4 porous hydrogel carrier used in intimately coupled photocatalysis and biodegradation system for efficient removal of tetracycline hydrochloride in water

Intimately coupled photocatalysis and biodegradation (ICPB) is a promising technology to remove refractory contaminants from water. The key to successful ICPB is a carrier capable of accumulating biofilm and adhering photocatalyst firmly. Herein, BC/g-C₃N₄ was prepared into a three dimensional porous hydrogel and used as a carrier in ICPB system for the first time. Degradation experiments revealed that the removal rate of tetracycline hydrochloride (TCH) in water by the ICPB system was 96.0% after 10 h, which was significantly higher than that by the photocatalysis (PC, 76.3%), biodegradation (B, 32.5%), adsorption (AD, 17.2%), and photolysis (P, 5.0%) systems. Photo-electrochemical tests confirmed that ICPB system had superior electron transfer ability between photocatalysts and microorganisms. The removal efficiency of COD proved that microorganisms played an important role in the mineralization process of TCH by the ICPB system. After the ICPB degradation experiment, microorganisms maintained high activity and Pseudomonas, Burkholderiaceae and Flavobacterium which had TCH degradation or electron transport ability, were enriched. In conclusion, the novel ICPB carrier overcame shortcomings of the traditional ICPB carrier and the novel ICPB system had superior degradation performance for TCH. This study provided a possible method to promote the practical application of ICPB technology.

BiOCl Heterojunction photocatalyst: Construction, photocatalytic performance, and applications

BiOCl semiconductors have attracted extensive amounts of attention and have substantial potential in alleviating energy shortages, improving sterilization performance, and solving environmental issues. To improve the optical quantum efficiency of layered BiOCl, the lifetimes of photogenerated electron-hole pairs, and BiOCl reduction capacity. During the past decade, researchers have designed many effective methods to weaken the effects of these limitations, and heterojunction construction is regarded as one of the most promising strategies. In this paper, BiOCl heterojunction photocatalysts designed and synthesized by various research groups in recent years were reviewed, and their photocatalytic properties were tested. Among them, direct Z-scheme and S-scheme photocatalysts have high redox potentials and intense redox capabilities. Hence, they exhibit excellent photocatalytic activity. Furthermore, the applications of BiOCl heterojunctions for pollutant degradation, CO₂ reduction, water splitting, N₂ fixation, organic synthesis, and tumor ablation are also reviewed. Finally, we summarize research on the BiOCl heterojunctions and put forth new insights on overcoming their present limitations.

Enhancement of Visible-Light Photocatalytic Degradation of Tetracycline by Co-Doped TiO2 Templated by Waste Tobacco Stem Silk

In this study, Co-doped TiO₂ was synthesized using waste tobacco stem silk (TSS) as a template via a one-pot impregnation method. These samples were characterized using various physicochemical techniques such as N₂ adsorption/desorption analysis, diffuse reflectance UV-visible spectroscopy, X-ray diffraction, field-emission scanning electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, photoluminescence spectroscopy, and electron paramagnetic resonance spectroscopy. The synthesized material was used for the photodegradation of tetracycline hydrochloride (TCH) under visible light (420-800 nm). No strong photodegradation activity was observed for mesoporous TiO₂ synthesized using waste TSS as a template, mesoporous Co-doped TiO₂, or TiO₂. In contrast, Co-doped mesoporous TiO₂ synthesized using waste TSS as a template exhibited significant photocatalytic degradation, with 86% removal of TCH. Moreover, owing to the unique chemical structure of Ti-O-Co, the energy gap of TiO₂ decreased. The edge of the absorption band was redshifted, such that the photoexcitation energy for generating electron-hole pairs decreased. The electron-hole separation efficiency improved, rendering the microstructured biotemplated TiO₂ a much more efficient catalyst for the visible-light degradation of TCH.

Synthesis and application of titanium dioxide photocatalysis for energy, decontamination and viral disinfection: a review

Global pollution is calling for advanced methods to remove contaminants from water and wastewater, such as TiO₂-assisted photocatalysis.  The environmental applications of titanium dioxide have started after the initial TiO₂ application for water splitting by Fujishima and Honda in 1972. TiO₂ is now used for self-cleaning surfaces, air and water purification systems, microbial inactivation and selective organic conversion. The synthesis of titanium dioxide nanomaterials with high photocatalytic activity is actually a major challenge. Here we review titanium dioxide photocatalysis with focus on mechanims, synthesis, and applications. Synthetic methods include sol-gel, sonochemical, microwave, oxidation, deposition, hydro/solvothermal, and biological techniques. Applications comprise the production of energy, petroleum recovery, and the removal of microplastics, pharmaceuticals, metals, dyes, pesticides, and of viruses such as the severe acute respiratory syndrome coronavirus 2.

Reuse of steel slag as a photocatalyst for tetracycline degradation: mechanism of oxygen vacancies

High value-added utilization of solid waste steel slag for the photocatalytic degradation of tetracycline is realized by alkali activation.

Design of TiO2/Ag3BiO3 n-n heterojunction for enhanced degradation of tetracycline hydrochloride under visible-light irradiation

Pharmaceutical residual contaminants in aquatic ecosystems have caused severe risks to human health. Affordable, eco-friendly and effective photocatalysts to deal with these pollutants has become a hot topic in the scientific community. In this research, Ag₃BiO₃ nanoparticles were embedded on TiO₂ to form n-n heterojunction through a facile hydrothermal method. According to scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FT-IR), brunauer emmett teller (BET), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), photoluminescence (PL), X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS) tests, the successful construction of TiO₂/Ag₃BiO₃ heterojunction is proved. TiO₂/Ag₃BiO₃ heterojunctions were employed as photocatalysts to remove tetracycline hydrochloride (TCH) under visible light irradiation in aqueous solution. Optimum TCH photodegradation efficiency was observed for TiO₂/Ag₃BiO₃ (10%), 15.4 times superior to that of TiO₂. The enhanced TCH photodegradation efficiency of TiO₂/Ag₃BiO₃ results from improved light absorption capacity and the reduction of recombination of photogenerated charge carriers via generation of n-n heterojunctions. The mechanism of increasing the photodegradation efficiency of TCH was determined by employing reactive species quenching experiments. TiO₂/Ag₃BiO₃ (10%) also exhibited an acceptable stability.

Dual Application: p-CuS/n-ZnS Nanocomposite Construction for High-Efficiency Colorimetric Determination and Photocatalytic Degradation of Tetracycline in Water

Herein, CuS was incorporated with ZnS to form a novel nanocomposite via cation exchange, and the product was then employed for dual application of the colorimetric determination and photocatalytic degradation of tetracycline (TC) in water. The formed p-n heterojunction provided an improved gap width and electron mobility, which could rapidly catalyze H₂O₂ to produce plenty of •OH, supporting a color conversion with TMB. Meanwhile, the addition of TC could lead to the further enhancement in colorimetric signal, and the distinction level was sensitive to the target amount. Additionally, under light conditions, the p-CuS/n-ZnS could produce •O₂^-, •OH, and h⁺ through photocatalysis, and these ions could degrade the TC via oxidation. In the colorimetric determination of TC, the signal responses were obtained within 10 min, and the detection limit was 20.94 nM. The recovery rates were 99% and 106% for the water samples from Ganjiang river. In the photocatalytic degradation, the TC was degraded by 91% within 120 min, which was threefold that of ZnS. Meanwhile, the morphology feature of the p-CuS/n-ZnS remained after multiple uses, suggesting a favorable material stability. This strategy provides application prospects for the monitoring and control of antibiotics in water.

Novel Indium Vanadium Oxide Nanosheet-Supported Nickel Iron Oxide Nanoplate Heterostructure for Synergistically Enhanced Photocatalytic Degradation of Tetracycline

Semiconductor-based heterogeneous photocatalytic oxidation processes have received considerable attention for the remediation of toxic pollutants. Herein, InVO4/NiFe2O4 nanocomposites were synthesized using a facile hydrothermal technique. Furthermore, various characterization results revealed the successful loading of NiFe2O4 nanoplates over InVO4 nanosheets, thereby signifying the formation of a heterostructure. The performance of the synthesized photocatalyst was tested for tetracycline (TC) antibiotic removal. The optimized InVO4/NiFe2O4 nanocomposite exhibits maximum photodegradation of TC molecules (96.68%) in 96 min; this is approximately 6.47 and 4.93 times higher than that observed when using NiFe2O4 and InVO4, respectively. The strong interaction between the InVO4 nanosheets and NiFe2O4 nanoplates can improve the visible-light absorption and hinder the recombination of charge carriers, further enhancing the photocatalytic performance. Moreover, hydroxyl radicals play a crucial role in the photodegradation of TC antibiotics.

Visible-Light-Driven Photocatalytic Degradation of Tetracycline Using Heterostructured Cu2O-TiO2 Nanotubes, Kinetics, and Toxicity Evaluation of Degraded Products on Cell Lines

This study first reports on the tetracycline photodegradation with the synthesized heterostructured titanium oxide nanotubes coupled with cuprous oxide photocatalyst. The large surface area and more active sites on TiO₂ nanotubes with a reduced band gap (coupling of Cu₂O) provide faster photodegradation of tetracycline under visible light conditions. Cytotoxicity experiments performed on the RAW 264.7 (mouse macrophage) and THP-1 (human monocytes) cell lines of tetracycline and the photodegraded products of tetracycline as well as quenching experiments were also performed. The effects of different parameters like pH, photocatalyst loading concentration, cuprous oxide concentration, and tetracycline load on the photodegradation rate were investigated. With an enhanced surface area of nanotubes and a reduced band gap of 2.58 eV, 1.5 g/L concentration of 10% C-TAC showed the highest efficiency of visible-light-driven photodegradation (∼100% photodegradation rate in 60 min) of tetracycline at pH 5, 7, and 9. The photodegradation efficiency is not depleted up to five consecutive batch cycles. Quenching experiments confirmed that superoxide radicals and hydroxyl radicals are the most involved reactive species in the photodegradation of tetracycline, while valance band electrons are the least involved reactive species. The cytotoxicity percentage of tetracycline and its degraded products on RAW 264.7 (-0.932) as well as THP-1 (-0.931) showed a negative correlation with the degradation percentage with a p-value of 0.01. The toxicity-free effluent of photodegradation suggests the application of the synthesized photocatalyst in wastewater treatment.

Synthesis and Property Examination of Er2FeSbO7/BiTiSbO6 Heterojunction Composite Catalyst and Light-Catalyzed Retrogradation of Enrofloxacin in Pharmaceutical Waste Water under Visible Light Irradiation

A new photocatalyst, Er2FeSbO7, was prepared by solid phase sintering using the high-temperature synthesis method for the first time in this paper. Er2FeSbO7/BiTiSbO6 heterojunction (EBH) catalyst was prepared by the solvent thermal method for the first time. Er2FeSbO7 compound crystallized in the pyrochlore-type architecture and cubelike crystal system; the interspace group of Er2FeSbO7 was Fd3m and the crystal cellular parameter a of Er2FeSbO7 was 10.179902 Å. The band gap (BDG) width of Er2FeSbO7 was 1.88 eV. After visible light irradiation of 150 minutes (VLGI-150min) with EBH as a photocatalyst, the removal rate (RR) of enrofloxacin (ENR) concentration was 99.16%, and the total organic carbon (TOC) concentration RR was 94.96%. The power mechanics invariable k toward ENR consistency and visible light irradiation (VLGI) time with EBH as a photocatalyzer attained 0.02296 min−1. The power mechanics invariable k which was involved with TOC attained 0.01535 min−1. The experimental results showed that the photocatalytic degradation (PCD) of ENR within pharmaceutical waste water with EBH as a photocatalyzer under VLGI was in keeping with the single-order reactivity power mechanics. The RR of ENR with EBH as a photocatalyzer was 1.151 times, 1.269 times or 2.524 times that with Er2FeSbO7 as a photocatalyst, BiTiSbO6 as a photocatalyst, or N-doping TiO2 (N-TO) as a photocatalyst after VLGI-150min. The photocatalytic activity, which ranged from high to low among above four photocatalysts, was as follows: EBHP > Er2FeSbO7 > BiTiSbO6 > N-TO. After VLGI-150min toward three periods of the project with EBH as a photocatalyst, the RR of ENR attained 98.00%, 96.76% and 95.60%. The results showed that the stability of EBH was very high. With appending trapping agent, it could be proved that the oxidative capability for degrading ENR, which ranged from strong to weak among three oxidic radicals, was as follows: superoxide anion > hydroxyl radicals (HRS) > holes. This work provides a scientific basis for the research and oriented leader development of efficient heterojunction catalysts.