Investigating the phytoavailability of metals in roots of Croton macrostachyus and Phytolacca dodecandra: induced rhizosphere processes

Re-vitalizing wastewater: Nutrient recovery and carbon capture through microbe-algae synergy using omics-biology

Increasing amounts of wastewater is the most pervasive and challenging environmental problem globally. Conventional treatment methods are costly and entail huge energy, carbon consumption and greenhouse gas emissions. Owing to their unique ability of carbon capturing and resource recovery, microalgae-microbiome based treatment is a potential approach and is widely used for carbon-neutral wastewater treatment. Microalgae-bacteria synergy (i.e., the functionally beneficial microbial synthetic communities) performs better and enhances carbon-sequestration and nutrient recovery from wastewater treatment plants. This review presents a comprehensive information regarding the potential of microalgae-microbiome as a sustainable agent for wastewater and discusses synergistic approaches for effective nutrient removal. Moreover, this review discusses, the role of omics-biology and Insilco approaches in unravelling and understanding the algae-microbe synergism and their response toward wastewater treatment. Finally, it discusses various microbiome engineering approaches for developing the effective microalgae-bacteria partners for carbon sequestration and nutrient recovery from wastewater, and summarizes future research perspectives on microalgae-microbiome based bioremediation.

The enhancement effect of n-Fe3O4 on methyl orange reduction by nitrogen-fixing bacteria consortium

Although the anaerobic reduction of azo dyes is ecofriendly, high ammonia consumption remains a significant challenge. This work enriched a mixed nitrogen-fixing bacteria consortium (NFBC) using n-Fe3O4 to promote the anaerobic reduction of methyl orange (MO) without exogenous nitrogen. The enriched NFBC was dominated by Klebsiella (80.77 %) and Clostridium (17.16 %), and achieved a 92.7 % reduction of MO with an initial concentration of 25 mg·L-1. Compared with the control, the consortium increased the reduction efficiency of MO, cytochrome c content, and electron transport system (ETS) activity by 11.86 %, 89.86 %, and 58.49 %, respectively. When using 2.5 g·L-1 n-Fe3O4, the extracellular polymeric substances (EPS) of NFBC were present in a concentration of 85.35 mg·g-1. The specific reduction rates of MO by NFBC were 2.26 and 3.30 times faster than those of Fe(II) and Fe(III), respectively, while the enrichment factor of the ribosome pathway in NFBC exceeded 0.75. Transcriptome, carbon consumption, and EPS analyses suggested that n-Fe3O4 stimulated carbon metabolism and secreted protein synthesized by the mixed culture. The latter occurred due to the increased activity of consortium and the content of redox substances. These findings demonstrate that n-Fe3O4 promoted the efficiency of mixed nitrogen-fixing bacteria for removing azo dyes from wastewater. This innovative approach highlights the potential of integrating nanomaterials with biological systems to effectively address complex pollution challenges.

Near-zero-waste processing of jarosite waste to achieve sustainability: A state-of-the-art review

Jarosite waste is a by-product generated from iron removal process in the jarosite process, which typically contains valuable metals including zinc, nickel, cobalt, silver, indium, and lead. Due to the large amount of jarosite and the less efficient and costly methods of recovering residual metals, it is mainly disposed by landfills. However, leachate generated from the landfills can release high concentrations of heavy metals, which contaminate nearby water resources and pose environmental and health risks. In this review, the environmental and resource properties of jarosite waste were briefly summarized. Then those pyrometallurgical, hydrometallurgical and biological methods were discussed. In this review, considering the polymetallic properties and the low content of valuable metal elements of the jarosite waste, it is indicated that these processes had their own benefits and drawbacks such as overall yield, economic and technical constraints, and the necessity for combined processes to recycle multiple metal ions from jarosite wastes. Finally, this paper provided a critical and systematic review of studies on the novel green recycling technology for metals and material preparation based on the jarosite waste. This review can lay a guidance for the near-zero-waste processing of jarosite waste, with a particular focus on the combination of chemical and biological processes and waste-to-materials.

Investigation of bioactive phytochemical compounds of the Ethiopian medicinal plant using GC-MS and FTIR

Medicinal plants Highly aromatic crude materials are utilized for treating warts as an alternative medicine to surgical treatment because they can be permanently removed from the body. Thus, this investigation aimed to extract plant material from Calotropis procera leaves, describe the phytochemical screening, analyze anti-microbial activities, determine the functional groups in FTIR, and identify the chemical compounds in GC-MS. The PH, specific gravity, and viscosity of the crude extracts of Calotropis procera were determined at 4.5, 0.79, and 0.49, respectively. Analyze the solubility of crude extracts; ethanol can dissolve while water does not. Flavonoids, alkaloids, phenols, tannins, and saponins were also present in the phytochemical screening tests of the Calotropis procera extracts, triterpenoids, terpenoids, and steroids were not present in the crude extract. Flavonoids, alkaloids, phenols, tannins, and saponins are the primary phytochemical components found in therapeutic plant material. The Calotropis procera crude extracts analyzed for functional groups by FT-IR contained a hydroxyl group, alkane, carbonyl, aldehyde, ketone, phenols, ester, alcohol, and methylene. The chemical compounds analyzed by GC-MS of Calotropis procera crude material were found to have 22 main compounds. Of 22 compounds, 5 compounds are active ingredients for the applications of medical purposes. The bioactive compounds found in the Calotropis procera plant extract are neophytadiene, hexahydrofarnesyl, lanosterol, 2,4-dimethylbenzo [H]quinolone, and squalene. Those bioactive compounds have anti-bacterial, analgesic, antipyretic, anti-inflammatory, antimicrobial, antioxidant, antiviral, and anti-cancer properties. In an in vitro antimicrobial activity test, the crude extract effectively inhibited more gram-positive bacteria than gram-negative bacteria. This collective reason is why the traditional therapist uses this Calotropis procera plant for the treatment of warts.

Ecotoxicological evaluation of effluent from bovine slaughterhouses disinfected by peracetic acid (PAA) using the bioindicator Girardia tigrina

The evaluation of the ecotoxicological effects of the effluent after treatment with peracetic acid is relevant to help establish reference concentrations for the disinfection process and waste recovery. Therefore, the objective of this work was to evaluate the ecotoxicity of effluent from a bovine slaughterhouse treated with peracetic acid on Girardia tigrina. The toxicity bioassays for planaria were the acute test (LC50) and chronic assays: locomotion, regeneration, reproduction and fertility. The results showed that the effluent treated with peracetic acid showed less toxicity than the effluent without application of peracetic acid. The effluent after peracetic acid application showed a chronic toxic effect in the reduction of locomotor speed in all studied disinfectant concentrations (0.8, 1.6, 3.3 and 6.6 μg L-1 of peracetic acid) and a delay in the formation of G. tigrina photoreceptors at the concentration of 6.6 μg L-1 of peracetic acid. Peracetic acid concentrations of 0.8, 1.6 and 3.3 μg L-1 were not toxic for blastema regeneration, photoreceptor and auricle formation, fecundity and fertility. In addition, this study assists in defining doses of peracetic acid to be recommended in order to ensure the wastewater disinfection process without causing harm to aquatic organisms.

Bioindicator responses to extreme conditions: Insights into pH and bioavailable metals under acidic metal environments

Acid mine drainage (AMD) caused environmental risks from heavy metal pollution, requiring treatment methods such as chemical precipitation and biological treatment. Monitoring and adapting treatment processes was crucial for success, but cost-effective pollution monitoring methods were lacking. Using bioindicators measured through 16S rRNA was a promising method to assess environmental pollution. This study evaluated the effects of AMD on ecological health using the ecological risk index (RI) and the Risk Assessment Code (RAC) indices. Additionally, we also examined how acidic metal stress affected the diversity of bacteria and fungi, as well as their networks. Bioindicators were identified using linear discriminant analysis effect size (LEfSe), Partial least squares regression (PLS-R), and Spearman analyses. The study found that Cd, Cu, Pb, and As pose potential ecological risks in that order. Fungal diversity decreased by 44.88% in AMD-affected areas, more than the 33.61% decrease in bacterial diversity. Microbial diversity was positively correlated with pH (r = 0.88, p = 0.04) and negatively correlated with bioavailable metal concentrations (r = -0.59, p = 0.05). Similarly, microbial diversity was negatively correlated with bioavailable metal concentrations (bio_Cu, bio_Pb, bio_Cd) (r = 0.79, p = 0.03). Acidiferrobacter and Thermoplasmataceae were prevalent in acidic metal environments, while Puia and Chitinophagaceae were identified as biomarker species in the control area (LDA>4). Acidiferrobacter and Thermoplasmataceae were found to be pH-tolerant bioindicators with high reliability (r = 1, P < 0.05, BW > 0.1) through PLS-R and Spearman analysis. Conversely, Puia and Chitinophagaceae were pH-sensitive bioindicators, while Teratosphaeriaceae was a potential bioindicator for Cu-Zn-Cd metal pollution. This study identified bioindicator species for acid and metal pollution in AMD habitats. This study outlined the focus of biological monitoring in AMD acidic stress environments, including extreme pH, heavy metal pollutants, and indicator species. It also provided essential information for heavy metal bioremediation, such as the role of omics and the effects of organic matter on metal bioavailability.

Synthesis and characterization of polysiphonia/cerium oxide/nickel oxide nanocomposites for the removal of toxins from contaminated water and antibacterial potential

Due to massive industrial development, organic and inorganic wastes are very common in most industrial effluents from the pharmaceutical industry. Even in low concentrations, they are very dangerous and harmful to humans and other living organisms. Antibiotics are frequently detected in surface waters, in soil, in wastewater from sewage treatment plants, and even in drinking water. The major environmental threat they pose has prompted to search for effective and environmentally friendly means of eliminating these toxins. The biogenic synthesis of nanomaterials using natural herbal extracts has attracted considerable attention due to their low-cost, environmentally friendly and non-toxic nature, and as a reversal of various physical and chemical processes. The ceria nanoparticles (CeO2 NPs), nickel oxide nanoparticles (NiO NPs), and CeO2/NiO nanocomposites (CeO2/NiO NCS) were successfully prepared by simple biosynthetic routes using Polysiphonia urceolata algae extract as green surfactants and tested for toxic ofloxacin removal efficiency. The formed nanostructures were identified and characterized by various microscopic (FESEM-EDX, TEM, XRD, BET, and XPS) and spectroscopic (UV-Vis, FTIR, and TGA) methods. The adsorption/desorption of ofloxacin (OFX) on the surface of the nanomaterials was investigated under optimized conditions (initial dose 20 mg/L, agitation speed 250 rpm, pH 12, adsorbent dose 0.5 mg/L, and contact time 120 min). The removal efficiencies were 78%, 86%, and 94% for CeO2 NPs, NiO NPs and CeO2/NiO NCS, respectively, where OFX removal was found to be spontaneous, followed by Freundlich isotherm and pseudo-second order kinetic reaction model. The OFX adsorption mechanism on the nanomaterials involved the surface complexation via specific electrostatic attraction and H-bonding. The biogenic nanomaterials were also tested for their antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis and Staphylococcus aureus. The CeO2/NiO NCS exhibited the highest antibacterial activity with zone of inhibition (31.12 ± 0.59 mm) against S. epidermidis, followed by CeO2NPs and NiONPs with zones of inhibition (25.53 ± 1.2 mm) and (21.42 ± 0.6 mm) against P. aeruginosa and S. epidermidis, respectively. This study demonstrated the efficiency of the synthesized nanomaterials in removing toxins such as OFX from contaminated water and can serve as potential antibacterial and antioxidant agents. Notably, the heterogeneous nanomaterials demonstrated remarkable stability across a broad pH range, promising reusability and indicated tremendous potential of waste biomass reduction and OFX effluent treatment.

Energy utilization of agricultural waste: Machine learning prediction and pyrolysis transformation

The rapid screening of agricultural waste materials for capacitor preparation holds significant importance in comprehending the relationship between material properties and enhancing experimental efficiency. In this study, we developed two machine learning models to predict electrode material characteristics using 2997 data points extracted from 235 articles. The identification and influence of key features on prediction indices provide a theoretical foundation for subsequent practical preparation. Through regression analysis and index evaluation, corn straw emerged as the optimal material for capacitor preparation, leading us to propose a one-step activation and two-step modification approach to convert corn straw into porous biochar. By modifying biochar with Co(NO3)2·6H2O, the maximum electrode capacitance of porous carbon reached 732.6 F/g. Furthermore, the electrode exhibited exceptional cycle stability with a remaining capacitance of 96 % after 5000 cycles. The prepared symmetric capacitor demonstrated pseudocapacitance behavior with a capacitance of 183.15 F/g at a current density of 1.0 A/g, power density of 22 kW/kg, and energy density of 9.03 Wh/kg. Considering the increasing annual output of corn straw and its superior industrial application prospects compared to acid-, base-, or precious metal-based alternatives due to their cost-effectiveness and environmental friendliness, these findings highlight the potential practical value in utilizing modified corn straw biochar as an efficient energy storage electrode material.

Protection against myocardial ischemia/reperfusion injury in mice by 3-caffeoylquinic acid isomers isolated from Saxifraga tangutica

The development of ischemic heart disease (IHD) involves a variety of pathophysiological responses, such as mitochondrial dysfunction. Many compounds with antioxidant activity isolated from natural products have been shown to have significant effects on the prevention and treatment of cardiovascular diseases. However, little is known about the palliative effects of 3-caffeoylquinic acid isomers isolated from Saxifraga tangutica (S. tangutica) on myocardial ischemia/reperfusion injury (MIRI). Three isomers of 3-caffeoylquinic acid were isolated from S. tangutica and identified as neochlorogenic acid (Fr2-4-1-1, 18.5 mg), chlorogenic acid (Fr2-5-1-1, 81.7 mg) and cryptochlorogenic acid (Fr2-5-2-1, 15.0 mg) using medium-pressure liquid chromatography-high-pressure two-dimensional liquid chromatography. An in vitro DPPH assay showed that cryptochlorogenic acid (CCGA), neochlorogenic acid (NCGA) and chlorogenic acid (CGA) (in order of activity from strongest to weakest) possessed superior antioxidant activity. Langendorff's in vitro model was utilized to explore the protective effects of 3 caffeoylquinic acid isomers against MIRI. The ex vivo MIRI assay demonstrated that CCGA significantly improved hemodynamic function (P < 0.05), hemodynamic function-related indices (LVDP, RPP, +dP/dt and -dP/dt), and cell morphology in I/R myocardium tissues. In addition, the results of western blot analysis showed that mitochondrial biogenesis was significantly increased in I/R myocardial tissues after treatment with CCGA. In contrast, the activities of CGA and NCGA were lower. This is the first demonstration of efficient preparative isolation of 3-caffeoylquinic acid isomers (CGA, NCGA and CCGA) from S. tangutica. CCGA may be a promising approach for the treatment of cardiac I/R injury, especially for the regulation of mitochondrial biogenesis after MIRI.

Preparation of imprinted bacterial cellulose aerogel with intelligent modulation of thermal response stimulation for selective adsorption of Gd(III) from wastewater

Research on recycling of used rare earth elements has been of great interest. Adsorption is one of the advantageous methods to recover gadolinium with high value. In the process of adsorption and separation of gadolinium from materials, the selectivity of materials for gadolinium can be significantly improved by using ion imprinting technique. However, gadolinium elution process is a traditional pickling process, which may affect the construction of imprinting sites. In this study, bacterial cellulose with three-dimensional spatial structure was used as the base material of aerogel material, and functional materials containing a large number of carboxyl groups were introduced by chemical grafting method. In combination with ion imprinting technology and N-polyacrylamide as intelligent temperature control valve, intelligent imprinting aerogel (PNBC-IIPS) with specific selectivity to gadolinium was prepared. The properties of aerogel materials were analyzed by SEM, FT-IR, and BET characterization. The experimental analysis shows that the desorption of gadolinium can be achieved by controlling the temperature change. The adsorption experiments show that PNBC-IIPS can selectively adsorb gadolinium ions from aqueous solution. The maximum adsorption capacity reached 95.51 mg g-1. Compared with unimprinted aerogel, the maximum adsorption capacity of gadolinium ion is significantly increased, which proves that the introduced ion imprinting technique plays a key role in the adsorption process. Cyclic experiments show that the adsorption capacity of PNBC-IIPS can still maintain 88% of the original adsorption capacity after 5 times of adsorption and desorption. In conclusion, PNBC-IIPS is a green adsorbent for selective recovery of gadolinium ions.

Influence of solvent-free extraction of fish oil from catfish (Clarias magur) heads using a Taguchi orthogonal array design: A qualitative and quantitative approach

This study aimed to efficiently utilize catfish heads, enhancing the oil extraction process while improving the cost-effectiveness of fish byproduct management. The study employed the wet rendering method, a solvent-free approach, utilizing a two-factor Taguchi orthogonal array design to identify critical parameters for optimizing oil yield and ensuring high-quality oil attributes. The extraction temperature (80-120°C) and time (5-25 min) were chosen as variables in the wet rendering process. Range analysis identified the extraction time as a more significant (p < 0.05) factor for most parameters, including oil yield, oil recovery, acid value, free fatty acids, peroxide value, and thiobarbituric acid reactive substances. The extraction temperature was more significant (p < 0.05) for oil color. Consequently, the wet rendering method was optimized, resulting in an extraction temperature of 80°C and an extraction time of 25 min, yielding the highest oil yield. This optimized wet rendering process recovered 6.37 g/100 g of oil with an impressive 54.16% oil recovery rate, demonstrating comparable performance to traditional solvent extraction methods. Moreover, Fourier transfer infrared spectra analysis revealed distinct peaks associated with triacylglycerols and polyunsaturated fatty acids (PUFA). The oil recovered under optimized conditions contained higher levels of PUFA, including oleic acid (189.92 μg/g of oil), linoleic acid (169.92 μg/g of oil), eicosapentaenoic acid (17.41 μg/g of oil), and docosahexaenoic acid (20.82 μg/g of oil). Volatile compound analysis revealed lower levels of secondary oxidation compounds under optimized conditions. This optimized wet rendering method offers practical advantages in terms of cost-efficiency, sustainability, reduced environmental impact, and enhanced oil quality, making it an attractive option for the fish processing industries. Future research possibilities may include the purification of the catfish head oil and its application in the food and pharmaceutical industries.