CuO and ZnO nanoparticles: phytotoxicity, metal speciation, and induction of oxidative stress in sand-grown wheat

Nanomaterials in plant physiology: Main effects in normal and under temperature stress

Global climate change and high population growth rates lead to problems of food security and environmental pollution, which require new effective methods to increase yields and stress tolerance of important crops. Nowadays the question of using artificial chemicals is very relevant in theoretical and practical terms. It is important that such substances in low concentrations protect plants under stress conditions, but at the same time inflict minimal damage on the environment and human health. Nanotechnology, which allows the production of a wide range of nanomaterials (NM), provides novel techniques in this direction. NM include structures less than 100 nm. The review presents data on the methods of NM production, their properties, pathways for arrival in plants and their use in human life. It is shown that NM, due to their unique physical and chemical properties, can cross biological barriers and accumulate in cells of live organisms. The influence of NM on plant organism can be both positive and negative, depending on the NM chemical nature, their size and dose, the object of study, and the environmental conditions. This review provides a comparative analysis of the effect of artificial metal nanoparticles (NPm), the commonly employed NMs in plant physiology, on two important aspects of plant life: photosynthetic apparatus activity and antioxidant system function. According to studies, NM affect not only the functional activity of photosynthetic apparatus, but also structural organization of chloroplats. In addition, the literature analysis reflects the dual action of NM on oxidative processes, and antioxidant status of plants. These facts considerably complicate the ideas about possible mechanisms and further use of NPm in biology. In this regard, data on the effects of NM on plants under abiotic stressors are of great interest. Separate section is devoted to the use of NM as adaptogens that increase plant stress tolerance to unfavorable temperatures. Possible mechanisms of NM effects on plants are discussed, as well as the strategies for their further use in basic science and sustainable agriculture.

Nanopriming boost seed vigor: Deeper insights into the effect mechanism

Nanopriming, an advanced seed priming technology, is highly praised for its environmental friendliness, safety, and effectiveness in promoting sustainable agriculture. Studies have shown that nanopriming can enhance seed germination by stimulating the expression of aquaporins and increasing amylase production. By applying an appropriate concentration of nanoparticles, seeds can generate reactive oxygen species (ROS), enhance their antioxidant capacity, improve their response to oxidative stress, and enhance their tolerance to both biotic and abiotic stresses. This positive impact extends beyond the seed germination and seedling growth stages, persisting throughout the entire life cycle. This review offers a comprehensive overview of recent research progress in seed priming using various nanoparticles, while also addressing current challenges and future opportunities for sustainable agriculture.

A systematic review and meta-analysis on the root effects and toxic mechanisms of rare earth elements

Rare earth elements (REEs) have attracted much attention because of their unique physical and chemical properties. The root system is the plant organ most directly in contact with REEs, and it is critical to understand the mechanisms of interaction between the two. This paper investigates the effects of REEs on plant enrichment and fractionation, as well as on various developmental and toxicity indices of the root system. REEs are more likely to be deposited on the root surface under the influence of root secretion. The complexation between the two affects the uptake and fractionation of REEs and the altered pattern of root secretion. The toxicity mechanisms of REEs on plant root cells were lied in: (1) REEs generate reactive oxygen species after entering the plant, leading to oxidative stress and damage to plant cells; (2) REEs with higher charge-to-volume ratios compete for organic ligands with or displace Ca2+, further disrupting the normal function of plant root cells. It was shown that the sensitivity of inter-root microorganisms to REEs varied depending on the content and physicochemical properties of REEs. The paper also concluded with a meta-analysis of phytotoxicity induced by REEs, which showed that REEs affect plant physiological parameters. REEs, as a source of oxidative stress, triggered lipid peroxidation damage in plants and enhanced the activity of antioxidant enzymes, thus revealing the significant toxicity of REEs to plants. The phytotoxic effects of REEs increased with time and concentration. These results help to elucidate the ecotoxicology of rare earth-induced phytotoxicity.

Synergistic enhancement of maize crop yield and nutrient assimilation via zinc oxide nanoparticles and phosphorus fertilization

BACKGROUND

Low recovery of conventional fertilizers remains a significant bottleneck for maize production globally. In particular, with phosphate fertilization, zinc (Zn) is prone to precipitation in soil, reducing recovery of both phosphorus (P) and Zn by maize.

RESULTS

The present study was designed to investigate the synergistic effect of zinc oxide (ZnO) nanoparticles (NPs) and P on maize crop growth, yield, and nutrient uptake under ZnO seed coating and foliar application in a randomized complete block design. However, plants were subjected to two ZnO NPs levels (0.5 and 12 kg ha-1) amended with two P levels (45 and 90 kg ha-1). ZnO NPs, especially in the form of foliar application, with a P dose of 90 Kg ha-1 significantly (P < 0.05) improved maize crop growth, yield, and nutrient uptake compared with control. In comparison with the control group, plants grown in these conditions absorbed higher levels of Zn and P. Zn uptake rose to 16.34 g ha-1, 137.88 g ha-1, and 166.89 g ha-1 in roots, grains, and stover respectively, and P uptake increased to 0.80 mg kg-1, 10.066 mg kg-1, and 12.17 mg kg-1 respectively. Additionally, seed emergence rate, plant height, and cob length increased by up to 2%, 1177 cm2, and 3.3 cm respectively compared with control. Furthermore, Zn use efficiency was increased up to 38.55% in ZnO NPs foliar application.

CONCLUSIONS

Application of ZnO NPs at 0.5 kg ha-1 in the form of foliar application with 90 kg ha-1 P dose produced a more pronounced increment in the parameters studied than ZnO NPs seed coating did. © 2024 Society of Chemical Industry.

Metal and metal oxide nanoparticles-induced reactive oxygen species: Phytotoxicity and detoxification mechanisms in plant cell

Nanotechnology is advancing rapidly in this century and the industrial use of nanoparticles for new applications in the modernization of different industries such as agriculture, electronic, food, energy, environment, healthcare and medicine is growing exponentially. Despite applications of several nanoparticles in different industries, they show harmful effects on biological systems, especially in plants. Various mechanisms for the toxic effects of nanoparticles have already been proposed; however, elevated levels of reactive oxygen species (ROS) molecules including radicals [(e.g., superoxide (O2•‒), peroxyl (HOO•), and hydroxyl (HO•) and non-radicals [(e.g., hydrogen peroxide (H2O2) and singlet oxygen (1O2) is more important. Excessive production/and accumulation of ROS in cells and subsequent induction of oxidative stress disrupts the normal functioning of physiological processes and cellular redox reactions. Some of the consequences of ROS overproduction include peroxidation of lipids, changes in protein structure, DNA strand breaks, mitochondrial damage, and cell death. Key enzymatic antioxidants with ROS scavenging ability comprised of superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX), peroxidase (POD), and glutathione reductase (GR), and non-enzymatic antioxidant systems including alpha-tocopherol, flavonoids, phenolic compounds, carotenoids, ascorbate, and glutathione play vital role in detoxification and maintaining plant health by balancing redox reactions and reducing the level of ROS. This review provides compelling evidence that phytotoxicity of nanoparticles, is mainly caused by overproduction of ROS after exposure. In addition, the present review also summarizes the intrinsic detoxification mechanisms in plants in response to nanoparticles accumulation within plant cells.

Nanoparticles and root traits: mineral nutrition, stress tolerance and interaction with rhizosphere microbiota

MAIN CONCLUSION

This review article highlights a broader perspective of NPs and plant-root interaction by focusing on their beneficial and deleterious impacts on root system architecture (RSA). The root performs a vital function by securing itself in the soil, absorbing and transporting water and nutrients to facilitate plant growth and productivity. In dicots, the architecture of the root system (RSA) is markedly shaped by the development of the primary root and its branches, showcasing considerable adaptability in response to changes in the environment. For promoting agriculture and combating global food hunger, the use of nanoparticles (NPs) may be an exciting option, for which it is essential to understand the behaviour of plants under NPs exposure. The nature of NPs and their physicochemical characteristics play a significant role in the positive/negative response of roots and shoots. Root morphological features, such as root length, root mass and root development features, may regulated positively/negatively by different types of NPs. In addition, application of NPs may also enhance nutrient transport and soil fertility by the promotion of soil microorganisms including plant growth-promoting rhizobacteria (PGPRs) and also soil enzymes. Interestingly the interaction of nanomaterials (NMs) with rhizospheric bacteria can enhance plant development and soil health. However, some studies also suggested that the increased use of several types of engineered nanoparticles (ENPs) may disrupt the equilibrium of the soil-root interface and unsafe morphogenesis by causing the browning of roots and suppressing the growth of root and soil microbes. Thus, this review article has sought to compile a broader perspective of NPs and plant-root interaction by focusing on their beneficial or deleterious impacts on RSA.

Enhancing french basil growth through synergistic Foliar treatment with copper nanoparticles and Spirulina sp

BACKGROUND

This study investigates a novel idea about the foliar application of nanoparticles as nanofertilizer combined with a natural stimulant, blue-green algae Spirulina platensis L. extract, as a bio-fertilizer to achieve safety from using nanoparticles for enhancement of the growth and production of the plant. Thus, this experiment aimed to chemically synthesize copper nanoparticles via copper sulfate in addition to evaluate the impact of CuNPs at 500, 1000, and 1500 mg/L and the combination of CuNPs with or without microalgae extract at 0.5, 1, and 1.5 g/L on the morphological parameters, photosynthetic pigments accumulation, essential oil production, and antioxidant activity of French basil.

RESULTS

The results revealed that foliar application of CuNPs and its interaction with spirulina extract significantly increased growth and yield compared with control, the treatments of 1000 and 1500 mg/L had less impact than 500 mg/L CuNPs. Plants treated with 500 mg/L CuNPs and 1.5 g/L spirulina extract showed the best growth and oil production, as well as the highest accumulation of chlorophylls and carotenoids. The application of CuNPs nanofertilizer caused a significant increase in the antioxidant activity of the French basil plant, but the combination of CuNPs with spirulina extract caused a decrease in antioxidant activity.

CONCULOSION

Therefore, foliar application of natural bio-fertilizer with CuNPsis necessary for obtaining the best growth and highest oil production from the French basil plant with the least damage to the plant and the environment.

Plant-nano interactions: A new insight of nano-phytotoxicity

Whether nanoparticles (NPs) are boon or bane for society has been a centre of in-depth debate and key consideration in recent times. Exclusive physicochemical properties like small size, large surface area-to-volume ratio, robust catalytic activity, immense surface energy, magnetism and superior biocompatibility make NPs obligatory in many scientific, biomedical and industrial ventures. Nano-enabled products are newer entrants in the present era. To attenuate environmental stress and maximize crop yields, scientists are tempted to introduce NPs as augmented supplements in agriculture. The feasible approaches for NPs delivery are irrigation, foliar spraying or seed priming. Internalization of excessive NPs to plants endorses negative implications at higher trophic levels via biomagnification. The characteristics of NPs (dimensions, type, solubility, surface charge), applied concentration and duration of exposure are prime factors conferring nanotoxicity in plants. Several reports approved NPs persuaded toxicity can precisely mimic abiotic stress effects. The signature effects of nanotoxicity include poor root outgrowth, biomass reduction, oxidative stress evolution, lipid peroxidation, biomolecular damage, perturbed antioxidants, genotoxicity and nutrient imbalance in plants. NPs stress impels mitogen-activated protein kinase signaling cascade and urges stress responsive defence gene expression to counteract stress in plants. Exogenous supplementation of nitric oxide (NO), arbuscular mycorrhizal fungus (AMF), phytohormones, and melatonin (ME) is novel strategy to circumvent nanotoxicity. Briefly, this review appraises plants' physio-biochemical responses and adaptation scenarios to endure NPs stress. As NPs stress represents large-scale contaminants, advanced research is indispensable to avert indiscriminate NPs usage for synchronizing nano-security in multinational markets.

The effects of green and chemically-synthesized copper oxide nanoparticles on the production and gene expression of morphinan alkaloids in Oriental poppy

Oriental poppy (Papaver orientale L.) belonging to the Papaveraceae family, has the capacity to synthesize a wide range of benzylisoquinoline alkaloids (BIAs). This experiment was conducted to investigate the effects of green and chemical copper oxide nanoparticles (CuO NPs) elicitors on oxidative stress and the BIAs biosynthesis pathway in the cell suspension culture of P. orientale. This research shows that both green and chemical CuO NPs at concentrations of 20 mg/L and 40 mg/L, induce oxidative stress in the cell suspension of P. orientale by increasing the production of H2O2 and the activity of antioxidant enzymes. The comparison of treatments revealed that utilizing a lower concentration of CuO NPs (20 mg/L) and extending the duration of cell suspension incubation (up to 48 h) play a more influential role in inducing the expression of the BIAs biosynthesis pathway genes (PsWRKY, TYDC, SalSyn, SalR, SalAT, T6ODM, COR and CODM) and increasing the production of morphinan alkaloids (thebaine, codeine, and morphine). The overarching results indicate that the concentration of CuO NPs and the duration of cell treatment have a more significant impact than the nature of CuO NPs in inducing oxidative stress and stimulating the expression of the BIAs pathway genes.

Nanoparticle applications in agriculture: overview and response of plant-associated microorganisms

Globally, food security has become a critical concern due to the rise in human population and the current climate change crisis. Usage of conventional agrochemicals to maximize crop yields has resulted in the degradation of fertile soil, environmental pollution as well as human and agroecosystem health risks. Nanotechnology in agriculture is a fast-emerging and new area of research explored to improve crop productivity and nutrient-use efficiency using nano-sized agrochemicals at lower doses than conventional agrochemicals. Nanoparticles in agriculture are applied as nanofertilizers and/or nanopesticides. Positive results have been observed in terms of plant growth when using nano-based agricultural amendments. However, their continuous application may have adverse effects on plant-associated rhizospheric and endospheric microorganisms which often play a crucial role in plant growth, nutrient uptake, and disease prevention. While research shows that the application of nanoparticles has the potential to improve plant growth and yield, their effect on the diversity and function of plant-associated microorganisms remains under-explored. This review provides an overview of plant-associated microorganisms and their functions. Additionally, it highlights the response of plant-associated microorganisms to nanoparticle application and provides insight into areas of research required to promote sustainable and precision agricultural practices that incorporate nanofertilizers and nanopesticides.

Proteomic insights to decipher nanoparticle uptake, translocation, and intercellular mechanisms in plants

Advent of proteomic techniques has made it possible to identify a broad spectrum of proteins in living systems. Studying the impact of nanoparticle (NP)-mediated plant protein responses is an emerging field. NPs are continuously being released into the environment and directly or indirectly affect plant's biochemistry. Exposure of plants to NPs, especially crops, poses a significant risk to the food chain, leading to changes in underlying metabolic processes. Once absorbed by plants, NPs interact with cellular proteins, thereby inducing changes in plant protein patterns. Based on the reactivity, properties, and translocation of nanoparticles, NPs can interfere with proteins involved in various cellular processes in plants such as energy regulation, redox metabolism, and cytotoxicity. Such interactions of NPs at the subcellular level enhance ROS scavenging activity, especially under stress conditions. Although higher concentrations of NPs induce ROS production and hinder oxidative mechanisms under stress conditions, NPs also mediate metabolic changes from fermentation to normal cellular processes. Although there has been lots of work conducted to understand the different effects of NPs on plants, the knowledge of proteomic responses of plants toward NPs is still very limited. This review has focused on the multi-omic analysis of NP interaction mechanisms with crop plants mainly centering on the proteomic perspective in response to both stress and non-stressed conditions. Furthermore, NP-specific interaction mechanisms with the biological pathways are discussed in detail.

Phytogenic nanoparticles: synthesis, characterization, and their roles in physiology and biochemistry of plants

Researchers are swarming to nanotechnology because of its potentially game-changing applications in medicine, pharmaceuticals, and agriculture. This fast-growing, cutting-edge technology is trying different approaches for synthesizing nanoparticles of specific sizes and shapes. Nanoparticles (NPs) have been successfully synthesized using physical and chemical processes; there is an urgent demand to establish environmentally acceptable and sustainable ways for their synthesis. The green approach of nanoparticle synthesis has emerged as a simple, economical, sustainable, and eco-friendly method. In particular, phytoassisted plant extract synthesis is easy, reliable, and expeditious. Diverse phytochemicals present in the extract of various plant organs such as root, leaf, and flower are used as a source of reducing as well as stabilizing agents during production. Green synthesis is based on principles like prevention/minimization of waste, reduction of derivatives/pollution, and the use of safer (or non-toxic) solvent/auxiliaries as well as renewable feedstock. Being free of harsh operating conditions (high temperature and pressure), hazardous chemicals and the addition of external stabilizing or capping agents makes the nanoparticles produced using green synthesis methods particularly desirable. Different metallic nanomaterials are produced using phytoassisted synthesis methods, such as silver, zinc, gold, copper, titanium, magnesium, and silicon. Due to significant differences in physical and chemical properties between nanoparticles and their micro/macro counterparts, their characterization becomes essential. Various microscopic and spectroscopic techniques have been employed for conformational details of nanoparticles, like shape, size, dispersity, homogeneity, surface structure, and inter-particle interactions. UV-visible spectroscopy is used to examine the optical properties of NPs in solution. XRD analysis confirms the purity and phase of NPs and provides information about crystal size and symmetry. AFM, SEM, and TEM are employed for analyzing the morphological structure and particle size of NPs. The nature and kind of functional groups or bioactive compounds that might account for the reduction and stabilization of NPs are detected by FTIR analysis. The elemental composition of synthesized NPs is determined using EDS analysis. Nanoparticles synthesized by green methods have broad applications and serve as antibacterial and antifungal agents. Various metal and metal oxide NPs such as Silver (Ag), copper (Cu), gold (Au), silicon dioxide (SiO2), zinc oxide (ZnO), titanium dioxide (TiO2), copper oxide (CuO), etc. have been proven to have a positive effect on plant growth and development. They play a potentially important role in the germination of seeds, plant growth, flowering, photosynthesis, and plant yield. The present review highlights the pathways of phytosynthesis of nanoparticles, various techniques used for their characterization, and their possible roles in the physiology of plants.

Environmental behaviors and toxic mechanisms of engineered nanomaterials in soil

Engineered nanomaterials (ENMs) are inevitably released into the environment with the exponential application of nanotechnology. Parts of ENMs eventually accumulate in the soil environment leading to potential adverse effects on soil ecology, crop production, and human health. Therefore, the safety application of ENMs on soil has been widely discussed in recent years. More detailed safety information and potential soil environmental risks are urgently needed. However, most of the studies on the environmental effects of metal-based ENMs have been limited to single-species experiments, ecosystem processes, or abiotic processes. The present review formulated the source and the behaviors of the ENMs in soil, and the potential effects of single and co-exposure ENMs on soil microorganisms, soil fauna, and plants were introduced. The toxicity mechanism of ENMs to soil organisms was also reviewed including oxidative stress, the release of toxic metal ions, and physical contact. Soil properties affect the transport, transformation, and toxicity of ENMs. Toxic mechanisms of ENMs include oxidative stress, ion release, and physical contact. Joint toxic effects occur through adsorption, photodegradation, and loading. Besides, future research should focus on the toxic effects of ENMs at the food chain levels, the effects of ENMs on plant whole-lifecycle, and the co-exposure and long-term toxicity effects. A fast and accurate toxicity evaluation system and model method are urgently needed to solve the current difficulties. It is of great significance for the sustainable development of ENMs to provide the theoretical basis for the ecological risk assessment and environmental management of ENMs.

Exploring the nano-wonders: unveiling the role of Nanoparticles in enhancing salinity and drought tolerance in plants

Plants experience diverse abiotic stresses, encompassing low or high temperature, drought, water logging and salinity. The challenge of maintaining worldwide crop cultivation and food sustenance becomes particularly serious due to drought and salinity stress. Sustainable agriculture has significant promise with the use of nano-biotechnology. Nanoparticles (NPs) have evolved into remarkable assets to improve agricultural productivity under the robust climate alteration and increasing drought and salinity stress severity. Drought and salinity stress adversely impact plant development, and physiological and metabolic pathways, leading to disturbances in cell membranes, antioxidant activities, photosynthetic system, and nutrient uptake. NPs protect the membrane and photosynthetic apparatus, enhance photosynthetic efficiency, optimize hormone and phenolic levels, boost nutrient intake and antioxidant activities, and regulate gene expression, thereby strengthening plant's resilience to drought and salinity stress. In this paper, we explored the classification of NPs and their biological effects, nanoparticle absorption, plant toxicity, the relationship between NPs and genetic engineering, their molecular pathways, impact of NPs in salinity and drought stress tolerance because the effects of NPs vary with size, shape, structure, and concentration. We emphasized several areas of research that need to be addressed in future investigations. This comprehensive review will be a valuable resource for upcoming researchers who wish to embrace nanotechnology as an environmentally friendly approach for enhancing drought and salinity tolerance.

Toxicity Mechanisms of Nanoplastics on Crop Growth, Interference of Phyllosphere Microbes, and Evidence for Foliar Penetration and Translocation

Despite the increasing prevalence of atmospheric nanoplastics (NPs), there remains limited research on their phytotoxicity, foliar absorption, and translocation in plants. In this study, we aimed to fill this knowledge gap by investigating the physiological effects of tomato leaves exposed to differently charged NPs and foliar absorption and translocation of NPs. We found that positively charged NPs caused more pronounced physiological effects, including growth inhibition, increased antioxidant enzyme activity, and altered gene expression and metabolite composition and even significantly changed the structure and composition of the phyllosphere microbial community. Also, differently charged NPs exhibited differential foliar absorption and translocation, with the positively charged NPs penetrating more into the leaves and dispersing uniformly within the mesophyll cells. Additionally, NPs absorbed by the leaves were able to translocate to the roots. These findings provide important insights into the interactions between atmospheric NPs and crop plants and demonstrate that NPs' accumulation in crops could negatively impact agricultural production and food safety.

In vitro influence of PEG functionalized ZnO-CuO nanocomposites on bacterial growth

Polyethyleneglycol-coated biocompatible CuO-ZnO nanocomposites were fabricated hydrothermally varying Zn:Cu ratios as 1:1, 2:1, and 1:2, and their antibacterial activity was determined through the well diffusion method against the Gram-negative Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and the Gram-positive Staphylococcus aureus. The minimum inhibitory concentration and the minimum bactericidal concentration values of the synthesized samples were determined. Subsequently, the time synergy kill assay was performed to elucidate the nature of the overall inhibitory effect against the aforementioned bacterial species. The mean zone of inhibition values for all four samples are presented. The inhibitory effect increased with increasing concentration of the nanocomposite (20, 40 and 60 mg/ml) on all the bacterial species except for S. aureus. According to the MBC/MIC ratio, ZnO was found to be bacteriostatic for E. coli and P. aeruginosa, and bactericidal for S. aureus and K. pneumoniae. Zn:Cu 2:1 was bactericidal on all bacterial species. A bacteriostatic effect was observed on E. coli and P. aeruginosa in the presence of Zn:Cu 1:1 whereas, it showed a bactericidal effect on S. aureus and K. pneumoniae. Zn:Cu 1:2 exhibited a bacteriostatic effect on E. coli while a bactericidal effect was observed for E. coli, P. aeruginosa, and K. pneumoniae. The metal oxide nanocomposites were found to be more sensitive towards the Gram-positive strain than the Gram-negative strains. Further, all the nanocomposites possess anti-oxidant activity as shown by the DPPH assay.

Development and testing of environment friendly nanohybrid coatings for sustainable agriculture technologies

Less than 50% of the applied urea fertilizer is taken up by plants due to poor nitrogen (N) use efficiency which affects overall agricultural productivity and leads to serious environmental and economic problems. Additionally, soils with high salinity might limit zinc (Zn) availability. Low Zn use efficiency (<30%) when applied as synthetic salts, e.g., zinc sulfate has therefore minimized their applicability. Within the past two decades, nanotechnology has gained a lot of interest in the development of effective nano fertilizers with high nutrient use efficiency (NUE). In this perspective, the approach of coating conventional fertilizers with nano materials especially, the ones which are essential nutrients has researched because of their high use efficiency and reduced losses. In this work, a novel and innovative formulation of hybrid nano fertilizer has been prepared for the sustainable release of nutrients. Zinc oxide nanoparticles (ZnO-NPs <50 nm) were incorporated into the biodegradable polymer (gelatin) and coated on urea using a fluidized bed coater. Among all the formulations, GZnSNPs (1.5% gelatin+0.5% elemental Zn as ZnO-NPs) showed a significant delay in urea release (<80 %) after 120 min). The sand column experiment showed sustainable Zn release for GZnSNPs i.e., 2.7 ppm vs. 3.5 ppm (GZnS) after the 6th day. Moreover, a substantial increase in wheat grain yield (6500 kg/ha), N uptake (46.5 kg/ha) and Zn uptake (21.64 g/ha) were observed for fields amended with GZnSNPs. The composition of GZnSNPs was valuable since this attracted the highest return relative to the other treatments. Gelatin supplied small N-containing molecules, resulting in extra value addition with ZnO-NPs thus increasing yield and fertilizer properties more relative to the same amount of elemental Zn given via bulk salt. Therefore, the findings of the current study recommend the use of ZnO-NPs in the agricultural sector without any negative effects on yield and NUE.

Nanoenabled Enhancement of Plant Tolerance to Heat and Drought Stress on Molecular Response

Global warming has posed significant pressure on agricultural productivity. The resulting abiotic stresses from high temperatures and drought have become serious threats to plants and subsequent global food security. Applying nanomaterials in agriculture can balance the plant's oxidant level and can also regulate phytohormone levels and thus maintain normal plant growth under heat and drought stresses. Nanomaterials can activate and regulate specific stress-related genes, which in turn increase the activity of heat shock protein and aquaporin to enable plants' resistance against abiotic stresses. This review aims to provide a current understanding of nanotechnology-enhanced plant tolerance to heat and drought stress. Molecular mechanisms are explored to see how nanomaterials can alleviate abiotic stresses on plants. In comparison with organic molecules, nanomaterials offer the advantages of targeted transportation and slow release. These advantages help the nanomaterials in mitigating drought and heat stress in plants.

Nanoscale CuO charge and morphology control Fusarium suppression and nutrient biofortification in field-grown tomato and watermelon

Limited data exist on how surface charge and morphology impact the effectiveness of nanoscale copper oxide (CuO) as an agricultural amendment under field conditions. This study investigated the impact of these factors on tomatoes and watermelons following foliar treatment with CuO nanosheets (NS-) or nanospikes (NP+ and NP-) exhibiting positive or negative surface charge. Results showed plant species-dependent benefits. Notably, tomatoes infected with Fusarium oxysporum had significantly reduced disease progression when treated with NS-. Watermelons benefited similarly from NP+. Although disease suppression was significant and trends indicated increased yield, the yield effects weren't statistically significant. However, several nanoscale treatments significantly enhanced the fruit's nutritional value, and this nano-enabled biofortification was a function of particle charge and morphology. Negatively charged nanospikes significantly increased the Fe content of healthy watermelon and tomato (20-28 %) and Ca in healthy tomato (66 %), compared to their positively charged counterpart. Negatively charged nanospikes also outperformed negatively charged nanosheets, leading to significant increases in the content of S and Mg in infected watermelon (37-38 %), Fe in healthy watermelon (58 %), and Ca (42 %) in healthy tomato. These findings highlight the potential of tuning nanoscale CuO chemistry for disease suppression and enhanced food quality under field conditions.

Effect of green-synthesized copper oxide nanoparticles on growth, physiology, nutrient uptake, and cadmium accumulation in Triticum aestivum (L.)

Cadmium (Cd) stress in crops has been serious concern while little is known about the copper oxide nanoparticles (CuO NPs) effects on Cd accumulation by crops. This study investigated the effectiveness of CuO NPs in mitigating Cd contamination in wheat (Triticum aestivum L.) cultivation through a pot experiment, presenting an eco-friendly solution to a critical agricultural concern. The CuO NPs, synthesized using green methods, exhibited a circular shape with a crystalline structure and a particle size ranging from 8 to 12 nm. The foliar spray of CuO NPs was applied in four different concentrations i.e. control, 25, 50, 75, 100 mg/L. The obtained data demonstrated that, in comparison to the control group, CuO NPs had a beneficial influence on various growth metrics and straw and grain yields of T. aestivum. The green CuO NPs improved T. aestivum growth and physiology under Cd stress, enhanced selected enzyme activities, reduced oxidative stress, and decreased malondialdehyde levels in the T. aestivum plants. CuO NPs lowered Cd contents in T. aestivum tissues and boosted the uptake of essential nutrients from the soil. Overall, foliar applied CuO NPs were effective in minimizing Cd contents in grains thereby reducing the health risks associated with Cd excess in humans. However, more in depth studies with several plant species and application methods of CuO NPs are required for better utilization of NPs in agricultural purposes.

Application of nanomaterials as potential quorum quenchers for disease: Recent advances and challenges

Chemical signal molecules are used by bacteria to interact with one another. Small hormone-like molecules known as autoinducers are produced, released, detected, and responded to during chemical communication. Quorum Sensing (QS) is the word for this procedure; it allows bacterial populations to communicate and coordinate group behavior. Several research has been conducted on using inhibitors to prevent QS and minimize the detrimental consequences. Through the enzymatic breakdown of the autoinducer component, by preventing the formation of autoinducers, or by blocking their reception by adding some compounds (inhibitors) that can mimic the autoinducers, a technique known as "quorum quenching" (QQ) disrupts microbial communication. Numerous techniques, including colorimetry, electrochemistry, bioluminescence, chemiluminescence, fluorescence, chromatography-mass spectroscopy, and many more, can be used to test QS/QQ. They all permit quantitative and qualitative measurements of QS/QQ molecules. The mechanism of QS and QQ, as well as the use of QQ in the prevention of biofilms, are all elaborated upon in this writing, along with the fundamental study of nanoparticle (NP)in QQ. Q.

Biofortification of Broccoli Microgreens (Brassica oleracea var. italica) with Glucosinolates, Zinc, and Iron through the Combined Application of Bio- and Nanofertilizers

There is a severe need to develop a sustainable, affordable, and nutritious food supply system. Broccoli microgreens have attracted attention due to their rich nutritional content and abundant bioactive compounds, constituting an important opportunity to feed the ever-increasing population and fight global health problems. This study aimed to measure the impact of the combined application of biofertilizers and zinc and iron nanofertilizers on plant growth and the biofortification of glucosinolates (GLSs) and micronutrients in broccoli microgreens. Biofertilizers were based on plant growth-promoting (PGP) bacterial consortia previously isolated and characterized for multiple PGP traits. Nanofertilizers consisted of ZnO (77 nm) and γ-Fe2O3 (68 nm) nanoparticles synthesized with the coprecipitation method and functionalized with a Pseudomonas species preparation. Treatments were evaluated under seedbed conditions. Plant growth parameters of plant height (37.0-59.8%), leaf diameter (57.6-81.1%) and fresh weight (112.1-178.0%), as well as zinc (122.19-363.41%) and iron contents (55.19-161.57%), were mainly increased by nanoparticles subjected to the functionalization process with Pseudomonas species and uncapped NPs applied together with the biofertilizer treatment. Regarding GLSs, eight compounds were detected as being most positively influenced by these treatments. This work demonstrated the synergistic interactions of applying ZnO and γ-Fe2O3 nanofertilizers combined with biofertilizers to enhance plant growth and biofortify micronutrients and glucosinolates in broccoli microgreens.

Nanoparticles as novel elicitors in plant tissue culture applications: Current status and future outlook

Plant tissue culture is the primary, fundamental, and applied aspect of plant biology. It is an indispensable and valuable technique for investigating morphogenesis, embryogenesis, clonal propagation, crop improvements, generation of pathogen-free plants, gene transfer and expression, and the production of secondary metabolites. The extensive use of various nanoparticles (NPs) in fields such as cosmetics, energy, medicine, pharmaceuticals, electronics, agriculture, and biotechnology have demonstrated positive impacts in microbial decontamination, callus differentiation, organogenesis, somatic variations, biotransformation, cryopreservation, and enhanced synthesis of bioactive compounds. This review summarizes the current state of knowledge with regard to the use of nanoparticles in plant tissue culture, with a particular focus on the beneficial outcomes. The positive (beneficial) and negative (toxic) effects of engineered NPs in tissue culture medium, delivery of transgenes, NPs toxicity concerns, safety issues, and potential hazards arising from utilization of nanomaterials in agriculture through plant tissue culture are discussed in detail, along with the future prospects for these applications. In addition, the potential use of novel nanomaterials such as graphene, graphite, dendrimers, quantum dots, and carbon nanotubes as well as unique metal or metalloid NPs are proposed. Further, the potential mechanisms underlying NPs elicitation of tissue culture response in different applications are critically evaluated. The potential of these approaches in plant nanobiotechnology is only now becoming understood and it is clear that the role of these strategies in sustainably increasing crop production to combat global food security and safety in a changing climate will be significant.

A review on toxicity of nanomaterials in agriculture: Current scenario and future prospects

Phytonanotechnology plays a crucial part in the production of good quality and high-yield food. It can also alter the plant's production systems, hence permitting the efficient, controlled and stable release of agrochemicals such as fertilizers and pesticides. An advanced understanding of nanomaterials interaction with plant responses like localization and uptake, etc. could transfigure the production of crops with high disease resistance and efficient nutrients utilization. In agriculture, the use of nanomaterials has gained acceptance due to their wide-range applications. However, their toxicity and bioavailability are the major hurdles for their massive employment. Undoubtedly, nanoparticles positively influence seeds germination, growth and development, stress management and post-harvest handling of vegetables and fruits. These nanoparticles may also cause toxicity in plants through oxidative stress by generation of excessive reactive oxygen species thus affecting the cellular biomolecules and targeting different channels. Nanoparticles have shown to exert various effects on plants that are mainly affected by various attributes such as physicochemical features of nanomaterials, coating materials for nanoparticles, type of plant, growth stages and growth medium for plants. This article discusses the interaction, accretion and toxicity of nanomaterials in plants. The factors inducing nanotoxicity and the mechanisms followed by nanomaterials causing toxicity are also instructed. At the end, detoxification mechanism of plant is also presented.

Favorable physiological and morphological effects of molybdenum nanoparticles on tobacco (Nicotiana tabacum L.): root irrigation is superior to foliar spraying

Introduction

Nano fertilizers can provide efficient solutions to the increasing problem of nutrient deficiency caused by low availability. However, the most important prerequisite is to fully understand whether nanomaterials induce phytotoxicity in plants under a variety of different conditions. The mechanisms underlying interactions between molybdenum nanoparticles (Mo NPs) and plants with respect to their uptake and biological effects on crops are still not fully understood.

Methods

In this study, the impacts of Mo NPs over a range of concentrations (0, 25, and 100 μg/mL) on tobacco (Nicotiana tabacum L.) seedling growth were comparatively evaluated under foliar applications and root irrigation.

Results

The results indicated that more significant active biological effects were observed with root irrigation application of Mo NPs than with foliar spraying. The agronomic attributes, water content and sugar content of Mo NPs-exposed seedlings were positively affected, and morphologically, Mo NPs induced root cell lignification and more vascular bundles and vessels in tobacco tissues, especially when applied by means of root irrigation. Moreover, the photosynthetic rate was improved by 131.4% for root exposure to 100 μg/mL Mo NPs, mainly due to the increased chlorophyll content and stomatal conductance. A significant concentration-dependent increase in malonaldehyde (MDA) and defensive enzyme activity for the Mo NPs-treated tobacco seedlings were detected compared to the controls. Significantly improved absorption of Mo by exposed tobacco seedlings was confirmed with inductively coupled plasma mass spectrometry (ICP-MS) in tobacco tissues, regardless of application method. However, the accumulation of Mo in roots increased by 13.94 times, when roots were exposed to 100 mg/L Mo NPs, higher than that under treatment with foliar spray. Additionally, Mo NPs activated the expression of several genes related to photosynthesis and aquaporin processes.

Discussion

The present investigations offer a better understanding of Mo NPs-plant interactions in terrestrial ecosystems and provide a new strategy for the application of Mo NPs as nano fertilizers in crop production.

Application of green synthesized bimetallic nZVI-Cu nanoparticle as a sustainable alternative to chemical fertilizers to enhance growth and photosynthetic efficiency of rice seedlings

Application of nanomaterials in agriculture has been extensively explored over the past decade leading to a wide ambit of nanoparticle-based agrochemicals. Metallic nanoparticles consisting of plant macro- and micro-nutrients have been used as nutritional supplements for plants through soil amendments, foliar sprays, or seed treatment. However, most of these studies emphasize monometallic nanoparticles which limit the range of usage and effectivity of such nanoparticles (NPs). Hence, we have employed a bimetallic nanoparticle (BNP) consisting of two different micro-nutrients (Cu & Fe) in rice plants to test its efficacy in terms of growth and photosynthesis. Several experiments were designed to assess growth (root-shoot length, relative water content) and photosynthetic parameters (pigment content, relative expression of rbcS, rbcL & ChlGetc.). To determine whether the treatment induced any oxidative stress or structural anomalies within the plant cells, histochemical staining, anti-oxidant enzyme activities, FTIR, and SEM micrographs were undertaken. Results indicated that foliar application of 5 mg L-1 BNP increased vigor and photosynthetic efficiency whereas 10 mg L-1 concentration induced oxidative stress to some extent. Furthermore, the BNP treatment did not perturb the structural integrity of the exposed plant parts and also did not induce any cytotoxicity. Application of BNPs in agriculture has not been explored extensively to date and this study is one of the first reports that not only documents the effectivity of Cu-Fe BNP but also critically explores the safety of its usage on rice plants making it a useful lead to design new BNPs and explore their efficacy.

Impact of nanopesticide CuO-NPs and nanofertilizer CeO2-NPs on wheat Triticum aestivum under global warming scenarios

Concurrent effect of nanomaterials (NMs) and warming on plant performance remains largely unexplored. In this study, the effects of nanopesticide CuO and nanofertilizer CeO₂ on wheat (Triticum aestivum) under optimal (22 °C) and suboptimal (30 °C) temperatures were evaluated. CuO-NPs exerted a stronger negative effect on plant root systems than CeO₂-NPs at tested exposure levels. The toxicity of both NMs could be attributed to altered nutrient uptake, induced membrane damage, and raised disturbance of antioxidative related biological pathways. Warming significantly inhibited root growth, which was mainly linked to the disturbance of energy metabolism relevant biological pathways. The toxicity of NMs was enhanced upon warming, with a stronger inhibition of root growth and Fe and Mn uptake. Increasing temperature increased the accumulation of Ce upon CeO₂-NP exposure, while the accumulation of Cu was not affected. The relative contribution of NMs and warming to their combined effects was evaluated by comparing disturbed biological pathways under single and multiple stressors. CuO-NPs was the dominant factor inducing toxic effects, while both CeO₂-NPs and warming contributed to the mixed effect. Our study revealed the importance of carefully considering global warming as a factor in risk assessment of agricultural applications of NMs.

Plant-ZnO nanoparticles interaction: An approach to improve guinea grass (Panicum maximum) productivity and evaluation of the impacts of its ingestion by freshwater teleost fish

We aimed to evaluate the possible effects of the application of zinc oxide nanoparticles [ZnO NPs; 68.96 ± 33.71 nm; at 100 and 500 mg/kg in a soil mixture of the Typic Dystrophic Red Latosol type and sand (2:1 ratio)] in the cultivation of Panicum maximum (until 125 days), using different biomarkers in addition to evaluating the uptake of Zn by the plants. Furthermore, we assessed the possible transfer of ZnO NPs from P. maximum leaves to zebrafish and their potential. Plants cultivated in substrates with ZnO NPs at 500 mg/kg showed reduced germination rate and growth. However, at 100 mg/kg, plants showed higher biomass and productivity, associated with higher Zn uptake, without inducing oxidative and nitrosative stress. Zinc content in zebrafish was not associated with ingesting leaves of P. maximum cultivated in substrate containing ZnCl₂ or ZnO NPs or with genotoxic, mutagenic, and biochemical effects. In conclusion, ZnO NPs (at 100 mg/kg) are promising in the cultivation of P. maximum, and their ingestion by zebrafish did not cause changes in the evaluated biomarkers. However, we recommend that studies with other animal models be conducted to comprehensively assess the ecotoxicological hazard associated with applying ZnO NPs in soil.

Chitosan-based nanocomposites as coatings and packaging materials for the postharvest improvement of agricultural product: A review

The perishability nature of harvested fruits and vegetables, along with the effect of environmental factors, storage conditions, and transportation, reduce the products' quality and shelf-life. Considerable efforts have been allocated to alternate conventional coatings based on new edible biopolymers for packaging. Chitosan is an attractive alternative to synthetic plastic polymers due to its biodegradability, antimicrobial activity, and film-forming properties. However, its conservative properties can be improved by adding active compounds, limiting microbial agents' growth and biochemical and physical damages, and enhancing the stored products' quality, shelf-life, and consumer acceptability. Most of the research on chitosan-based coatings focuses on antimicrobial or antioxidant properties. Along with the advancement of polymer science and nanotechnology, novel chitosan blends with multiple functionalities are required and should be fabricated using numerous strategies, especially for application during storage. This review discusses recent developments in using chitosan as a matrix to fabricate bioactive edible coatings and their positive impacts on increasing the quality and shelf-life of fruits and vegetables.

Potential ecotoxicity of substrate-enriched zinc oxide nanoparticles to Physalaemus cuvieri tadpoles

Although the ecotoxicological effects of ZnO nanoparticles (ZnO NPs) have already been reported in different taxa, little is known about their impacts on amphibians. Thus, we aimed to evaluate the potential effects of exposure of Physalaemus cuvieri tadpoles to substrates enriched with ZnO NPs (and with its ionic counterpart, Zn+2, ZnCl2 - both at 100 mg/kg) previously used in the cultivation of Panicum maximum (Guinea grass). We showed that although exposure for 21 days did not impact the survival, growth, and development of tadpoles, we noted an increase in the frequency of erythrocyte nuclear abnormalities in the "ZnCl2" and "ZnONP" groups, which was associated with suppression of antioxidant activity in the animals (inferred by SOD and CAT activity and DPPH free radical scavenging capacity). In the tadpoles of the "ZnONP" group, we also noticed a reduction in creatinine and bilirubin levels, alpha-amylase activity, and an increase in alkaline phosphatase activity. But the treatments did not alter the activity of the enzymes lactate dehydrogenase and gamma-glutamyl-transferase and total protein and carbohydrate levels. On the other hand, we report a cholinesterase and hypotriglyceridemic effect in the "ZnCl2" and "ZnONP" groups. Zn bioaccumulation in animals, from ZnO NPs, from Zn+2 released from them, or both, has been associated with causing these changes. Finally, principal component analysis (PCA) and the values of the "Integrated Biomarker Response" index revealed that the exposure of animals to substrates enriched with ZnO NPs caused more pronounced effects than those attributed to its ionic counterpart. Therefore, our study reinforces the need to consider the environmental risks of using these nanomaterials for agricultural purposes for amphibians.

Effect of MnxOy Nanoparticles Stabilized with Methionine on Germination of Barley Seeds (Hordeum vulgare L.)

The aim of this research was to study the effect of Mn_xO_y nanoparticles stabilized with L-methionine on the morphofunctional characteristics of the barley (Hordeum vulgare L.) crop. Mn_xO_y nanoparticles stabilized with L-methionine were synthesized using potassium permanganate and L-methionine. We established that Mn_xO_y nanoparticles have a diameter of 15 to 30 nm. According to quantum chemical modeling and IR spectroscopy, it is shown that the interaction of Mn_xO_y nanoparticles with L-methionine occurs through the amino group. It is found that Mn_xO_y nanoparticles stabilized with L-methionine have positive effects on the roots and seedling length, as well as the seed germination energy. The effect of Mn_xO_y nanoparticles on Hordeum vulgare L. seeds is nonlinear. At a concentration of 0.05 mg/mL, there was a statistically significant increase in the length of seedlings by 68% compared to the control group. We found that the root lengths of samples treated with Mn_xO_y nanoparticle sols with a concentration of 0.05 mg/mL were 62.8%, 32.7%, and 158.9% higher compared to samples treated with L-methionine, KMnO₄, and the control sample, respectively. We have shown that at a concentration of 0.05 mg/mL, the germination energy of seeds increases by 50.0% compared to the control sample, by 10.0% compared to the samples treated with L-methionine, and by 13.8% compared to the samples treated with KMnO₄.

Nanoengineered particles for sustainable crop production: potentials and challenges

Nanoengineered nanoparticles have a significant impact on the morphological, physiology, biochemical, cytogenetic, and reproductive yields of agricultural crops. Metal and metal oxide nanoparticles like Ag, Au, Cu, Zn, Ti, Mg, Mn, Fe, Mo, etc. and ZnO, TiO2, CuO, SiO2, MgO, MnO, Fe2O3 or Fe3O4, etc. that found entry into agricultural land, alter the morphological, biochemical and physiological system of crop plants. And the impacts on these parameters vary based on the type of crop and nanoparticles, doses of nanoparticles and its exposure situation or duration, etc. These nanoparticles have application in agriculture as nanofertilizers, nanopesticides, nanoremediator, nanobiosensor, nanoformulation, phytostress-mediator, etc. The challenges of engineered metal and metal oxide nanoparticles pertaining to soil pollution, phytotoxicity, and safety issue for food chains (human and animal safety) need to be understood in detail. This review provides a general overview of the applications of nanoparticles, their potentials and challenges in agriculture for sustainable crop production.

Nanocomposite-based smart fertilizers: A boon to agricultural and environmental sustainability

Fertilizers are indispensable agri-inputs to accomplish the growing food demand. The injudicious use of conventional fertilizer products has resulted in several environmental and human health complications. To mitigate these problems, nanocomposite-based fertilizers are viable alternative options. Nanocomposites, a novel class of materials having improved mechanical strength, barrier properties, and mechanical and thermal stability, are suitable candidates to develop eco-friendly slow/controlled release fertilizer formulations. In this review, the use of different nanocomposite materials developed for nutrient management in agriculture has been summarized with a major focus on their synthesis and characterization techniques, and application aspects in plant nutrition, along with addressing constraints and future opportunities of this domain. Further detailed studies on nanocomposite-based fertilizers are required to evaluate the cost-effective synthesis methods, in-depth field efficacy, environmental fate, stability, etc. before commercialization in the field of agriculture. The present review is expected to help the policy makers and all the stakeholders in the large-scale commercialization and application of nanocomposite-based smart fertilizer products with greater societal acceptance and environmental sustainability in near future.

Biosynthesis and characterization of nanoparticles, its advantages, various aspects and risk assessment to maintain the sustainable agriculture: Emerging technology in modern era science

The current review aims to gain knowledge on the biosynthesis and characterization of nanoparticles (NPs), their multifactorial role, and emerging trends of NPs utilization in modern science, particularly in sustainable agriculture, for increased yield to solve the food problem in the coming era. However, it is well known that an environment-friendly resource is in excessive demand, and green chemistry is an advanced and rising resource in exploring eco-friendly processes. Plant extracts or other resources can be utilized to synthesize different types of NPS. Hence NPs can be synthesized by organic or inorganic molecules. Inorganic molecules are hydrophilic, biocompatible, and highly steady compared to organic types. NPs occur in numerous chemical conformations ranging from amphiphilic molecules to metal oxides, from artificial polymers to bulky biomolecules. NPs structures can be examined by different approaches, i.e., Raman spectroscopy, optical spectroscopy, X-ray fluorescence, and solid-state NMR. Nano-agrochemical is a unification of nanotechnology and agro-chemicals, which has brought about the manufacture of nano-fertilizers, nano-pesticides, nano-herbicides, nano-insecticides, and nano-fungicides. NPs can also be utilized as an antimicrobial solution, but the mode of action for antibacterial NPs is poorly understood. Presently known mechanisms comprise the induction of oxidative stress, the release of metal ions, and non-oxidative stress. Multiple modes of action towards microbes would be needed in a similar bacterial cell for antibacterial resistance to develop. Finally, we visualize multidisciplinary cooperative methods will be essential to fill the information gap in nano-agrochemicals and drive toward the usage of green NPs in agriculture and plant science study.

Unveiling of interactions between foliar-applied Cu nanoparticles and barley suffering from Cu deficiency

The objective of this study was to evaluate nano-Cu-plant interactions under Cu deficiency. Nano-Cu at rates of 100 and 1000 mg L^-1 was applied as foliar spray to Hordeum vulgare L. during increased demand for nutrients at tillering stage. Corresponding treatment with CuSO₄ was used to exam the nano-specific effects. Cu compounds-plant leaves interactions were analyzed with spectroscopic and microscopic methods (ICP-OES, FTIR/ATR, SEM-EDS). Moreover, the effect of Cu compounds on plants in terms of biomass, pigments content, lipid peroxidation, antiradical properties, the activity of enzymes involved in plant defense against stress (SOD, CAT, POD, GR, PAL, PPO) and the content of non-enzymatic antioxidants (GSH, GSSG, TPC) was determined after 1 and 7 days of exposure. Cu loading to plant leaves increased over time, but the content of Cu under treatment with nano-Cu at 100 mg L^-1 was lower by 76% than CuSO₄ at 7th day of exposure. The changes induced by applied Cu compounds in biochemical traits were mostly observed after 1 day. Our data showed that CuSO₄ exposure induce oxidative stress (increased MDA level and GSSG content) when compared to control and nano-Cu treated plants. Noteworthy, nano Cu at 100 mg L^-1 demonstrated enhanced stress tolerance as indicated by boosted GSH content. After 7 days, the antioxidant response was almost same compared to control sample. However, based on other indicators (pigment content, chlorosis sign, biomass), it should be noted that CuSO₄ caused serve oxidative burst of plant which may resulted in damage of defense system. Nano-Cu, especially at 100 mg L^-1, showed promising effect on plant health, and obtained results may be useful for optimizing of nano-Cu application as fertilizer agent.

Nanotechnological approaches for management of soil-borne plant pathogens

Soil borne pathogens are significant contributor of plant yield loss globally. The constraints in early diagnosis, wide host range, longer persistence in soil makes their management cumbersome and difficult. Therefore, it is crucial to devise innovative and effective management strategy to combat the losses caused by soil borne diseases. The use of chemical pesticides is the mainstay of current plant disease management practices that potentially cause ecological imbalance. Nanotechnology presents a suitable alternative to overcome the challenges associated with diagnosis and management of soil-borne plant pathogens. This review explores the use of nanotechnology for the management of soil-borne diseases using a variety of strategies, such as nanoparticles acting as a protectant, as carriers of actives like pesticides, fertilizers, antimicrobials, and microbes or by promoting plant growth and development. Nanotechnology can also be used for precise and accurate detection of soil-borne pathogens for devising efficient management strategy. The unique physico-chemical properties of nanoparticles allow greater penetration and interaction with biological membrane thereby increasing its efficacy and releasability. However, the nanoscience specifically agricultural nanotechnology is still in its toddler stage and to realize its full potential, extensive field trials, utilization of pest crop host system and toxicological studies are essential to tackle the fundamental queries associated with development of commercial nano-formulations.

Nitric oxide overcomes copper and copper oxide nanoparticle-induced toxicity in Sorghum vulgare seedlings through regulation of ROS and proline metabolism

This study aimed to investigate the phytotoxic effect of copper (Cu) and copper nanoparticles (CuONPs) and ameliorative potential of nitric oxide (NO) against these toxic materials in Sorghum vulgare Pers. seedlings. Data suggested that exposure of Cu and CuONPs significantly reduced growth, chlorophyll, carotenoids and protein in root and shoot, which coincided with increased Cu accumulation. However, addition of sodium nitroprusside (SNP, a donor of NO) lowered Cu and CuONPs mediated toxicity through restricting Cu accumulation and improving photosynthetic pigments and total soluble protein contents. Data further suggested that exposure of Cu and CuONPs significantly increased hydrogen peroxide (H2 O2 ), superoxide radicals (O2 •- ), and malondialdehyde (MDA) contents. Enhanced level of oxidative stress severely inhibited the enzymatic activities of glutathione reductase (GR), ascorbate peroxidase (APX), dehydroascorbate reductase (DHAR) and monodehydroascorbate reductase (MDHAR) but enhanced superoxide dismutase (SOD) and catalase (CAT) activity. However, addition of SNP positively regulated antioxidants enzymes activity, particularly the enzymes involved in the ascorbate-glutathione cycle to overcome Cu- and CuONPs-induced stress in Sorghum seedlings. Further, Cu and CuONPs enhanced accumulation of free proline through inducing Δ1 -pyrroline-5-carboxylate synthetase (P5CS) activity while lowering the proline dehydrogenase (PDH) activity. However, addition of SNP reversed these responses. Therefore, overall results revealed that SNP has enough potential of reducing the toxicity of Cu and CuONPs in Sorghum seedlings through regulation of proline metabolism and activity of enzymes of the ascorbate-glutathione cycle. These findings can be employed in developing new resistant varieties of Sorghum having enhanced tolerance against Cu or CuONP stress and improved productivity.

Nanoparticles assisted regulation of oxidative stress and antioxidant enzyme system in plants under salt stress: A review

The global biomass production from agricultural farmlands is facing severe constraints from abiotic stresses like soil salinization. Salinity-mediated stress triggered the overproduction of reactive oxygen species (ROS) that may result in oxidative burst in cell organelles and cause cell death in plants. ROS production is regulated by the redox homeostasis that helps in the readjustment of the cellular redox and energy state in plants. All these cellular redox related functions may play a decisive role in adaptation and acclimation to salinity stress in plants. The use of nanotechnology like nanoparticles (NPs) in plant physiology has become the new area of interest as they have potential to trigger the various enzymatic and non-enzymatic antioxidant capabilities of plants under varying salinity levels. Moreover, NPs application under salinity is also being favored due to their unique characteristics compared to traditional phytohormones, amino acids, nutrients, and organic osmolytes. Therefore, this article emphasized the core response of plants to acclimate the challenges of salt stress through auxiliary functions of ROS, antioxidant defense system and redox homeostasis. Furthermore, the role of different types of NPs mediated changes in biochemical, proteomic, and genetic expressions of plants under salt stress have been discussed. This article also discussed the potential limitations of NPs adoption in crop production especially under environmental stresses.

Nanomaterials biotransformation: In planta mechanisms of action

Research on engineered nanomaterials (ENMs) exposure has continued to expand rapidly, with a focus on uncovering the underlying mechanisms. The EU largely limits the number and the type of organisms that can be used for experimental testing through the 3R normative. There are different routes through which ENMs can enter the soil-plant system: this includes the agricultural application of sewage sludges, and the distribution of nano-enabled agrochemicals. However, a thorough understanding of the physiological and molecular implications of ENMs dispersion and chronic low-dose exposure remains elusive, thus requiring new evidence and a more mechanistic overview of pathways and major effectors involved in plants. Plants can offer a reliable alternative to conventional model systems to elucidate the concept of ENM biotransformation within tissues and organs, as a crucial step in understanding the mechanisms of ENM-organism interaction. To facilitate the understanding of the physico-chemical forms involved in plant response, synchrotron-based techniques have added new potential perspectives in studying the interactions between ENMs and biota. These techniques are providing new insights on the interactions between ENMs and biomolecules. The present review discusses the principal outcomes for ENMs after intake by plants, including possible routes of biotransformation which make their final fate less uncertain, and therefore require further investigation.

Ethylene accelerates copper oxide nanoparticle-induced toxicity at physiological, biochemical, and ultrastructural levels in rice seedlings

The enormous use of metal-based nanoparticles (NPs) in different sectors may result in enhanced accumulation in agricultural soil, which could impose negative effects on crop productivity. Hence, strategies are needed to explore the mechanisms of copper oxide nanoparticle (CuO NP)-induced toxicity in crops. The present study aimed to investigate the involvement of ethylene in CuO NP-induced toxicity in rice seedlings. Here, our results indicate that 450 mg L^-1 of CuO NPs induced toxic effects in rice seedlings. Thus, it was evidenced by the reduced plant biomass accumulation, enhanced oxidative stress indicators, and cellular ultrastructural damages. More importantly, the exogenous supply of ethylene biosynthesis and signaling antagonists cobalt (Co) and silver (Ag) respectively provided tolerance and improved the defense system of rice seedlings against CuO NP toxicity. The ethylene antagonists could significantly reduce the extent of ultrastructural and stomatal damage by controlling the ROS accumulation in rice seedlings under CuO NP stress. Furthermore, Co and Ag augmented the antioxidant defense system against CuO NP-induced toxicity. Contrary to that, all oxidative damage attributes were further enhanced exogenous application of ethylene biosynthesis precursor [1-aminocyclopropane-1-carboxylic acid (ACC)] in the presence of CuO NPs. In addition, ACC could increase the CuO NP-induced stomatal and ultrastructural damages by reducing the ROS-scavenging ability in rice seedlings. Taken together, these results indicate the involvement of ethylene in CuO NP-induced toxicity in rice seedlings.

Nanopriming of Barley Seeds-A Shotgun Approach to Improve Germination under Salt Stress Conditions by Regulating of Reactive Oxygen Species

Abiotic stresses are the most important environmental factors affecting seed germination, and negatively affect crop production worldwide. Water availability is essential for proper seed imbibition and germination. The mechanism by which seeds can germinate in areas with high soil salinity is, however, still unclear. The present study aims to investigate the protective roles of AgNPs in alleviating stress symptoms caused by salinity exposure in barley seeds. For this purpose, different treatment combinations of seed priming with PVP-AgNPs in salinity stress conditions were used. Salt stress (150 and 200 mM) was found to reduce seed germination by 100% when compared to the control. Under NaCl concentrations, seed priming with PVP-AgNPs (40 mg L^-1) only for 2 h, reduced salinity effects. Salinity resulted in increased reactive oxygen species (ROS) generation compared to the control. However, increased antioxidants in the NPs treatments, such as SOD, CAT, GR, GPX (expression at both genes, such as HvSOD, HvCAT, HvGR or HvGPX, and protein levels) and glutathione content, scavenged these ROS. Considering all of the parameters under study, priming alleviated salt stress. To summarize, seed priming with AgNPs has the potential to alleviate salinity stress via reduced ROS generation and activation of the antioxidant enzymatic system during germination.

Impact of elicitors on essential oil compositions and phytochemical constituents in Lavandula stoechas L

Lavandula stoechas L. (LS) is an aromatic evergreen herb used broadly in the food, pharmaceutical, and perfume industries. However, the inducer effect of elicitors on secondary metabolites (SMs) biosynthesis in LS is nebulous. In addition, the precise mechanism of elicitors in cells remains unexplored. Hence, the primary objective of this study was to analyze the changes in phytochemical compositions of LSs treated with a biotic elicitor (chitin) and an abiotic one (copper nanoparticle) under in vitro and greenhouse conditions, with the aim of choosing an appropriate elicitor type, concentration, and exposure time for this species. In this study, the biochemical function of four chitin concentrations (i.e. 0, 50, 100 & 200 mg L^-1) and four copper oxide nanoparticle concentrations (i.e. 0, 25, 50, & 100 mg L^-1) at two exposure times (i.e. 5 & 10 days) was investigated in LS so as to compare with the un-elicited explants and the original plant materials. The analysis showed that the highest contents of the total phenolic (4.68 mg g^-1 FW), flavonoids (0.68 mg g^-1 FW), anthocyanins (36.51 mg g^-1 FW), and flavonols (0.29 mg g^-1 FW) compounds were observed in the elicited LSs. Besides, the role of elicitors in augmenting the percentage of SMs was intelligible, especially 'lavandulol', '1,8-cineole', 'germacrene D', and '(E)-nerolidol', which increased by 21.68%, 17.21%, 9.33%, and 8.11%, respectively. In conclusion, these findings indicate that utilizing elicitors at optimal concentrations and with timely durations of exposure can largely assist in improving the biotechnological production of SMs in LS, so that their potential for industrial use can be actualized.

Relevance of the Exocyst in Arabidopsis exo70e2 Mutant for Cellular Homeostasis under Stress

Plants must adapt to cope with adverse environmental conditions that affect their growth and development. To overcome these constraints, they can alter their developmental patterns by modulating cellular processes and activating stress-responsive signals. Alongside the activation of the antioxidant (AOX) system, a high number of genes are expressed, and proteins must be distributed to the correct locations within the cell. The endomembrane system and associated vesicles thus play an important role. Several pathways have been associated with adverse environmental conditions, which is the case for the exocyst-positive organelle-EXPO. The present work, using Arabidopsis mutants with T-DNA insertions in the gene EXO70, essential for EXPO vesicles formation, was designed to characterise the anatomical (morphology and root length), biochemical (quantification of stress markers and antioxidant system components), and molecular responses (gene expression) to abiotic stresses (saline, drought, oxidative, and metal-induced toxicity). The results obtained showed that mutant plants behave differently from the wild type (WT) plants. Therefore, in the exo70 mutant, morphological changes were more noticeable in plants under stress, and the non-enzymatic component of the antioxidant system was activated, with no alterations to the enzymatic component. Furthermore, other defence strategies, such as autophagy, did not show important changes. These results confirmed the EXPO as an important structure for tolerance/adaptation to stress.

Role of Nanoparticles in Enhancing Crop Tolerance to Abiotic Stress: A Comprehensive Review

Plants are subjected to a wide range of abiotic stresses, such as heat, cold, drought, salinity, flooding, and heavy metals. Generally, abiotic stresses have adverse impacts on plant growth and development which affects agricultural productivity, causing food security problems, and resulting in economic losses. To reduce the negative effects of environmental stress on crop plants, novel technologies, such as nanotechnology, have emerged. Implementing nanotechnology in modern agriculture can also help improve the efficiency of water usage, prevent plant diseases, ensure food security, reduce environmental pollution, and enhance sustainability. In this regard, nanoparticles (NPs) can help combat nutrient deficiencies, promote stress tolerance, and improve the yield and quality of crops. This can be achieved by stimulating the activity of certain enzymes, increasing the contents (e.g., chlorophyll) and efficiency of photosynthesis, and controlling plant pathogens. The use of nanoscale agrochemicals, including nanopesticides, nanoherbicides, and nanofertilizers, has recently acquired increasing interest as potential plant-enhancing technologies. This review acknowledges the positive impacts of NPs in sustainable agriculture, and highlights their adverse effects on the environment, health, and food chain. Here, the role and scope of NPs as a practical tool to enhance yield and mitigate the detrimental effects of abiotic stresses in crops are described. The future perspective of nanoparticles in agriculture has also been discussed.

Insights into the recent advances in nano-bioremediation of pesticides from the contaminated soil

In the present scenario, the uncontrolled and irrational use of pesticides is affecting the environment, agriculture and livelihood worldwide. The excessive application of pesticides for better production of crops and to maintain sufficient food production is leading to cause many serious environmental issues such as soil pollution, water pollution and also affecting the food chain. The efficient management of pesticide use and remediation of pesticide-contaminated soil is one of the most significant challenges to overcome. The efficiency of the current methods of biodegradation of pesticides using different microbes and enzymes depends on the various physical and chemical conditions of the soil and they have certain limitations. Hence, a novel strategy is the need of the hour to safeguard the ecosystem from the serious environmental hazard. In recent years, the application of nanomaterials has drawn attention in many areas due to their unique properties of small size and increased surface area. Nanotechnology is considered to be a promising and effective technology in various bioremediation processes and provides many significant benefits for improving the environmental technologies using nanomaterials with efficient performance. The present article focuses on and discusses the role, application and importance of nano-bioremediation of pesticides and toxic pollutants to explore the potential of nanomaterials in the bioremediation of hazardous compounds from the environment.

Zn speciation and fate in soils and sediments along the ground transportation route of Zn ore to a smelter

Assessment of Zn toxicity/mobility based on its speciation and transformations in soils is critical for maintaining human and ecosystem health. Zn-concentrate (56 % Zn as ZnS, sphalerite) has been imported through a seaport and transported to a Zn-smelter for several decades, and smelting processes resulted in aerial deposition of Zn and sulfuric acids in two geochemically distinct territories around the smelter (mountain-slope and riverside). XAFS analysis showed that the mountain-slope soils contained franklinite (ZnFe₂O₄) and amorphous (e.g., sorbed) species of Zn(II), whereas the riverside sediments contained predominantly hydrozincite [Zn₅(OH)₆(CO₃)₂], sphalerite, and franklinite. The mountain-slope soils had low pH and moderate levels of total Zn (~ 1514 ppm), whereas the riverside sediments had neutral pH and higher total Zn (12,363 ppm). The absence of sphalerite and the predominance of franklinite in the mountain-slope soils are attributed to the susceptibility of sphalerite and the resistance of franklinite to dissolution at acidic pH. These results are compared to previous Zn analyses along the transportation routes, which showed that Zn-concentrate spilled along the roadside in dust and soils underwent transformation to various O-coordinated Zn species. Overall, Zn-concentrate dispersed in soils and sediments during transportation and smelting transforms into Zn phases of diverse stability and bioavailability during long-term weathering.

Interaction of the Nanoparticles and Plants in Selective Growth Stages—Usual Effects and Resulting Impact on Usage Perspectives

Nanotechnologies have received tremendous attention since their discovery. The current studies show a high application potential of nanoparticles for plant treatments, where the general properties of nanoparticles such as their lower concentrations for an appropriate effects, the gradual release of nanoparticle-based nutrients or their antimicrobial effect are especially useful. The presented review, after the general introduction, analyzes the mechanisms that are described so far in the uptake and movement of nanoparticles in plants. The following part evaluates the available literature on the application of nanoparticles in the selective growth stage, namely, it compares the observed effect that they have when they are applied to seeds (nanopriming), to seedlings or adult plants. Based on the research that has been carried out, it is evident that the most common beneficial effects of nanopriming are the improved parameters for seed germination, the reduced contamination by plant pathogens and the higher stress tolerance that they generate. In the case of plant treatments, the most common applications are for the purpose of generating protection against plant pathogens, but better growth and better tolerance to stresses are also frequently observed. Hypotheses explaining these observed effects were also mapped, where, e.g., the influence that they have on photosynthesis parameters is described as a frequent growth-improving factor. From the consortium of the used nanoparticles, those that were most frequently applied included the principal components that were derived from zinc, iron, copper and silver. This observation implies that the beneficial effect that nanoparticles have is not necessarily based on the nutritional supply that comes from the used metal ions, as they can induce these beneficial physiological changes in the treated cells by other means. Finally, a critical evaluation of the strengths and weaknesses of the wider use of nanoparticles in practice is presented.

Simultaneous exposure of wheat (Triticum aestivum L.) to CuO and S nanoparticles alleviates toxicity by reducing Cu accumulation and modulating antioxidant response

Widespread use of metal-based nanoparticles (NPs) may result in the increased accumulation of metals in agricultural soil, which could affect crop productivity and contaminate the food-chain. The effect of sulfur nanoparticles (S NPs, 200 mg/L) co-exposure on the toxicity of CuO nanoparticles (CuO NPs, 25 and 50 mg/L) to wheat seedlings was investigated in a hydroponic system. CuO NPs exposure significantly inhibited the growth of wheat seedlings, causing 43.6% and 54.1% decreases in the fresh biomass of plants and 82.8% and 83.1% decrease in the total chlorophyll contents at 25 and 50 mg/L (CuONP25 and CuONP50), respectively, as compared to controls. CuO NPs exposure at both concentrations increased the malondialdehyde (MDA) content in shoot and root tissues by 66.4-67.9% and 47.7-48.8%, respectively. Further, CuO NPs exposure elevated the activities POD, SOD, and CAT by 2.19-2.27, 5.82-6.09, and 1.44-1.95 times in roots, and by 45.2-67.8%, 86.7-154.5%, and 22.5-56.1% in shoot, respectively, in comparison to control. The addition of S NPs alone increased wheat biomass by 11.0% and total chlorophyll contents by 4.4%, compared to controls. Further, simultaneous exposure to S NPs (200 mg/L) and CuO NPs (25 or 50 mg/L) alleviated the CuO NPs toxicity; wheat biomass was 47.8% and 37.7% higher in CuONP25 + SNP and CuONP50 + SNP treatments, respectively, as compared to CuO NPs alone treated plants. Co-exposed plants showed reduced levels of total reactive oxygen species (ROS), O₂^·- and H₂O₂. Additionally, S NPs exposure reduced Cu uptake and accumulation in both root and shoot tissue by 32.2-54.4% and 38.3-57.5%, respectively. In summary, S NPs alleviated CuO NPs toxicity to wheat seedlings, most likely by reducing Cu bioavailability and accumulation of Cu in plant tissues, and also altered S nutrition and the modulation of antioxidant response in plants. These results showed that S NPs application has the potential to alleviate CuO NP toxicity and increase wheat productivity affected by metals toxicity.